Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extractants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The Upgrade of the SNS Extraction Kicker Power Supplies for the Proton Power Upgrade

The Proton Power Upgrade (PPU) project at the Spallation Neutron Source (SNS) aims to enhance the linear accelerator's power output from 1.4 to 2.8 megawatts. A critical focus lies on upgrading the Extraction Kicker Power Supplies to handle the amplified beam power. The existing capacitor charging power supplies lacked the capability to charge the Blumlein-type Pulse Forming Network (PFN) to the required 40 kV at a repetition rate of 60 Hz. To address this limitation, an initial solution involving the use of a resonant charging circuit was proposed. However, a challenge arose with a self-firing issue in the thyristor switch, which proved unsolvable within the given timeframe. Facing a critical decision point in the project, an alternative approach was explored: integrating a supplementary power supply to enhance the overall power capacity. This solution was tested and ultimately chosen as the path forward. To accommodate the additional power supply, the power distribution system had to undergo upgrades. Throughout this endeavor, a comprehensive examination of the system took place, with meticulous identification of key components. This paper delves into the technical challenges encountered during the process and the corresponding solutions that were implemented.

Tan, Yugang [ORNL] (ORCID:0000000155968252)↗
DOE OSTI2021

Progress in development of pulsed resonant charging power supply for the Spallation Neutron Source extraction kicker PFN system

A conceptual design of the pulsed resonant charging power supply (RCPS) for the beam extraction system of the Spallation Neutron Source (SNS) at the Oak Ridge National Laboratory (ORNL) was previously reported at the 2019 IEEE Pulsed Power & Plasma Science Conference (PPPS 2019) [1]. Development and testing of the prototype supply continued through the year to finalize the design ahead of the Proton Power Upgrade (PPU). Testing revealed reliability issues with the original resonant charging scheme related to the step-up transformer core. Additional components were incorporated into the system, and some of the original prototype components were replaced to improve performance and reliability of the power supply. This paper describes the changes in the resonant charging scheme, presents the results of testing of the improved prototype at full power level, and shows the final design of the RCPS.

Peplov, Vladimir↗
DOE OSTI2020

Sputtered Aluminum Oxide and p+ Amorphous Silicon Back-Contact for Improved Hole Extraction in Polycrystalline CdSexTe1-x and CdTe Photovoltaics

A thin layer of Al 2 O 3 at the back of CdSe x T e1-x /CdTe devices is shown to passivate the back interface and drastically improve surface recombination lifetimes and photoluminescent response. Despite this, such devices do not show an improvement in open-circuit voltage (VOC.) Adding a p + amorphous silicon layer behind the Al 2 O 3 bends the conduction band upward, reducing the barrier to hole extraction and improving collection. Further optimization of the Al 2 O 3 , amorphous silicon (a-Si), and indium-doped tin oxide (ITO) layers, as well as their interaction with the CdCl 2 passivation process, are necessary to translate these electro-optical improvements into gains in voltage.

14 SOLAR ENERGY↗
DOE OSTI2026

Development of Design for the STS Extraction Magnet System

The Oak Ridge National Laboratory STS Project will enhance the Spallation Neutron Source by adding a new neutron source. The upgrade includes a 30% increase in beam energy and a 50% boost in beam current, doubling the accelerator's power capability to 2.8 MW. The Ring-to-Second-Target Beam Transport (RTST) system is vital in directing high-energy proton beams to the new second target station. New magnets have to fit into a restricted space within the existing beamline to add the new extraction line. New, fast kicker magnets (Pulsed Dipole), a focusing quad with an aperture for both beamlines (Large Quad) and the replacement of existing 21Q40 Quads with 'Narrow Quads' having identical fields as the existing design are Fermilab's responsibility. The design of these magnets poses unique challenges, as in addition to the high requirements on the quality of magnetic fields, they are subject to major restrictions related to their dimensions.

Chernenok, V. [Fermilab] (ORCID:0009000778148215)↗
DOE OSTI2021

Extracting Resilience Metrics From Distribution Utility Data Using Outage and Restore Process Statistics

Resilience curves track the accumulation and restoration of outages during an event on an electric distribution grid. We show that a resilience curve generated from utility data can always be decomposed into an outage process and a restore process and that these processes generally overlap in time. We use many events in real utility data to characterize the statistics of these processes, and derive formulas based on these statistics for resilience metrics such as restore duration, customer hours not served, and outage and restore rates. The formulas express the mean value of these metrics as a function of the number of outages in the event. We also give a formula for the variability of restore duration, which allows us to predict a maximum restore duration with 95% confidence. Overall, we give a simple and general way to decompose resilience curves into outage and restore processes and then show how to use these processes to extract resilience metrics from standard distribution system data.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Fluorescence Assay for Tolyporphins Amidst Abundant Chlorophyll in Crude Cyanobacterial Extracts

Abstract Tolyporphins are distinctive tetrapyrrole natural products found singularly in a filamentous cyanobacterial‐microbial holobiont (termed HT‐58‐2) from Micronesia. The absorption and fluorescence features of tolyporphins resemble those of chlorophyll a , complicating direct analysis of culture samples. Treatment of the crude (unfractionated) organic extract (CH 2 Cl 2 /2‐propanol, 1:1) of HT‐58‐2 cultures with NaBH 4 in methanol causes reduction of the peripheral ketone auxochromes, whereupon tolyporphins (predominantly 7,17‐dioxobacteriochlorins) exhibit a bathochromic shift ( λ abs ˜ 676 → ˜ 700 nm) and chlorophyll a (a 13 1 ‐oxochlorin) exhibits a hypsochromic shift ( λ abs 665 → 634 nm). Fluorescence excitation spectroscopy (at 368 and 491 nm with λ em 710 nm) enabled detection of reduced tolyporphins amidst abundant reduced chlorophyll a (1:19 ratio), a detection sensitivity >5 times that without reduction. The resulting assay combines simple sample preparation from non‐axenic cultures at microscale quantities (2 mL, 2 μ m ), absence of any fractionation procedures, and fluorescence detection. Tolyporphins were readily detected in cultures of HT‐58‐2 at reasonable growth periods in the absence of environmental stressors, which was not possible previously.

Nguyen, Kathy‐Uyen↗
DOE OSTI2025

Automated nuclear cloud feature extraction from film

Chemical, biological, radiological, nuclear, and explosives incidents require rapid detection and characterization for appropriate response. For a nuclear detonation, visible-light cameras may be used to locate the cloud and characterize fallout deposition when coupled with numerical models. Films from the United States’ nuclear testing era compose the only sizeable collection of imagery depicting high-yield detonations. These films offer unique insights into characteristics of flows involving scales that are difficult to replicate experimentally, and they are a valuable source of data for the validation of models for nuclear fallout transport, either as part of emergency response or forensic activities. In this work, we implement modern computer vision and machine learning techniques to identify and track the cloud automatically and subsequently determine the time dependence of some of its features. We trained a ResNet-18 image classifier on hundreds of images to categorize nuclear cloud morphology. Each category or cloud regime is determined by early cloud evolution and is associated to constitutive properties of the flow, such as distribution of vorticity. Next, we identified keypoint features using the KAZE algorithm and tracked these keypoints in the images, allowing us to determine the dimensions and velocities of the cloud across film frames. These measurements converted to real-world units provide valuable experimental data that can be used in the development and validation of nuclear cloud models. We compared the results of this method against manual cloud rise measurements from two different films. In one, our automated method accelerated the feature extraction process without sacrificing measurement accuracy.

Khristy, Joel [ORNL] (ORCID:0000000209963060)↗
DOE OSTI2026

A dual membrane-adsorption evaporator for solar-powered lithium extraction from complex brines

A reliable supply of lithium is required to meet the increased demand for batteries over the coming decades. In this work, we demonstrated the potential to effectively extract lithium from brines by coupling solar-powered evaporation, adsorption, and membrane technologies together. We first synthesized a three-dimensional adsorptive evaporator by coating a lithium manganese oxide material onto a cotton stick using an easily scalable, one-step method. An osmotic membrane was then installed at the root of the evaporator to enhance the lithium to magnesium selectivity, prevent scaling caused by divalent cations, and thus further increase the water evaporation flux. The operation of the dual membrane-adsorption evaporator is entirely driven by osmosis and capillary force, demanding no extra energy input. The integration of the osmotic membrane was found to increase the lithium to magnesium selectivity over 10-fold to higher than 40. The dual process also produced high lithium to calcium selectivity and proved to sustain long-term stability by self-managing its internal osmotic pressure. Last, a test was done in three simulated brine solutions with varied brine chemistry and the evaporation rate stayed high and consistent throughout the long-term test. This illustrates that this technology can be used in varied brine solutions throughout the world providing efficient lithium capture and separation from competing divalent cations.

Eskafi, Aydin F. [University of California, Berkel↗
DOE OSTI2021

The proton charge radius extracted from the initial-state radiation experiment at MAMI

Abstract We report on a comprehensive reinterpretation of the existing cross-section data for elastic electron-proton scattering obtained by the initial-state radiation technique, resulting in a significantly improved accuracy of the extracted proton charge radius. By refining the external energy corrections we have achieved an outstanding description of the radiative tail, essential for a detailed investigation of the proton finite-size effects on the measured cross sections. This development, together with a novel framework for determining the radius, based on a regression analysis of the cross sections employing a polynomial model for the form factor, led us to a new value for the charge radius, which is $$(0.878 \pm 0.011_\mathrm {stat.}\pm 0.031_\mathrm {sys.}\pm 0.002_\mathrm {mod.})\,\mathrm {fm}$$ ( 0.878 ± 0 . 011 stat . ± 0 . 031 sys . ± 0 . 002 mod . ) fm

Physics↗
DOE OSTI2023

Measurement of the differential $\hbox {t}\overline{\hbox {t}}$ production cross section as a function of the jet mass and extraction of the top quark mass in hadronic decays of boosted top quarks

A measurement of the jet mass distribution in hadronic decays of Lorentz-boosted top quarks is presented. The measurement is performed in the lepton + jets channel of top quark pair production ($\hbox {t}\overline{\hbox {t}}$) events, where the lepton is an electron or muon. The products of the hadronic top quark decay are reconstructed using a single large-radius jet with transverse momentum greater than 400 GeV. The data were collected with the CMS detector at the LHC in proton-proton collisions and correspond to an integrated luminosity of 138 fb -1 . The differential $\hbox {t}\overline{\hbox {t}}$ production cross section as a function of the jet mass is unfolded to the particle level and is used to extract the top quark mass. The jet mass scale is calibrated using the hadronic W boson decay within the large-radius jet. The uncertainties in the modelling of the final state radiation are reduced by studying angular correlations in the jet substructure. These developments lead to a significant increase in precision, and a top quark mass of 173.06 ± 0.84 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Toward extracting $$\gamma $$ from $$B\rightarrow DK$$ without binning

Abstract $$B^\pm \rightarrow DK^\pm $$ B ± → D K ± transitions are known to provide theoretically clean information about the CKM angle $$\gamma $$ γ , with the most precise available methods exploiting the cascade decay of the neutral D into CP self-conjugate states. Such analyses currently require binning in the D decay Dalitz plot, while a recently proposed method replaces this binning with the truncation of a Fourier series expansion. In this paper, we present a proof of principle of a novel alternative to these two methods, in which no approximations at the level of the data representation are required. In particular, our new strategy makes no assumptions about the amplitude and strong phase variation over the Dalitz plot. This comes at the cost of a degree of ambiguity in the choice of test statistic quantifying the compatibility of the data with a given value of $$\gamma $$ γ , with improved choices of test statistic yielding higher sensitivity. While our current proof-of-principle implementation does not demonstrate optimal sensitivity to $$\gamma $$ γ , its conceptually novel approach opens the door to new strategies for $$\gamma $$ γ extraction. More studies are required to see if these can be competitive with the existing methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Neuromorphic Graph Algorithms: Extracting Longest Shortest Paths and Minimum Spanning Trees

Neuromorphic computing is poised to become a promising computing paradigm in the post Moore's law era due to its extremely low power usage and inherent parallelism. Traditionally speaking, a majority of the use cases for neuromorphic systems have been in the field of machine learning. In order to expand their usability, it is imperative that neuromorphic systems be used for non-machine learning tasks as well. The structural aspects of neuromorphic systems (i.e., neurons and synapses) are similar to those of graphs (i.e., nodes and edges), However, it is not obvious how graph algorithms would translate to their neuromorphic counterparts. In this work, we propose a preprocessing technique that introduces fractional offsets on the synaptic delays of neuromorphic graphs in order to break ties. This technique, in turn, enables two graph algorithms: longest shortest path extraction and minimum spanning trees.

Kay, Bill↗
DOE OSTI2021

TomoEncoders: 3D Autoencoders for feature extraction in X-ray tomography

Real-time steering of time-resolved or in-situ X-ray tomography requires capturing changes in morphological descriptors in a sample (e.g., porosity, particle size, and crack width) during continuous data acquisition. Image segmentation (2D or3D) followed by quantitative measurement is the conventional method for tracking changes in these descriptors with respect to a previous time-step or a 3D search in a volume. However, image segmentation is expensive. As a faster and unsupervised alternative, a feature-extraction approach using a convolutional autoencoders was developed, where the latent space of the encoder responds to relative changes in morphology with-out prior knowledge of the morphological descriptors.

TEKAWADE, ANIKET↗
DOE OSTI2026

LLM Information Extraction Toolkit

A modular Python framework for information extraction using large language models with support for multiple backends and optional verification workflows.

Yoon, Hong-Jun [Oak Ridge National Laboratory (ORN↗
DOE OSTI2021

SARS-CoV2 Protein-Ligand Simulation Dataset: Layer 2 (Lowest Temperature Extracted Protein Coordinate Trajectories)

Protein-only trajectories of the lowest-temperature window (310K) extracted from temperature replica-exchange molecular dynamics simulations of 23 different SARS CoV-2 systems, including S Protein ACE2-receptor binding-domain, MPro, PLPro, NSP3 ADRP (X-domain/macrodomain/phosphatase), NSP15 (endoribonuclease), NSP9, NSP10, NSP16, and N-protein N-terminus. Systems were prepared with charmm-gui and simulated using the GROMACS simulation software suite. Trajectories are provided in compressed dcd format with accompanying coordinate/topology files in pdb and psf formats. This data supplements the data release, DOI: 10.13139/OLCF/1650650 ('SARS-CoV2 Protein-Ligand Simulation Dataset: Layer 1 (Simulation Initial Conditions and Parameters)')

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Simulation of enhanced light extraction from periodic, disordered, and quasi-periodic OLED structures

Here we have developed a rigorous scattering matrix theory of light emission from periodically structured media using a Green’s function approach. We computationally simulate the spectral power inside the structure, incorporating Purcell factor enhancements, and find internal waveguiding modes and plasmonic losses. We simulate the light-outcoupling factor η out and describe how corrugations and structured media can enhance η out . We have extended our framework to describe non-periodic disordered arrays as well as aperiodic quasi-crystalline arrays. Flat organic light-emitting diodes (OLEDs) have low outcoupling with η out ~20% since most of the light is trapped in waveguided modes in higher index layers or lost to plasmonic excitations at the metal cathode. Periodically corrugated OLEDs can achieve highly enhanced η out ~65%-70% for pitch values between 1000 and 2000 nm, representing an enhancement factor >3 over planar structures. Periodic corrugations strongly diffract trapped waveguided and plasmonic modes to the emissive air cone. Disordered templates also can cause significant enhanced outcoupling with η out ~50%-55% for smaller nearest-neighbor separations of 300–400 nm. Quasi-crystalline tilings can also lead to enhancements of η out ~50%-55%. This framework can be utilized to design novel structured media that can generate high light extraction.

42 ENGINEERING↗