Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dielectrics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electronic Properties of Ultra‐Wide Bandgap B x Al 1− x N Computed from First‐Principles Simulations

Abstract Ultra‐wide bandgap (UWBG) materials such as AlN and BN hold great promise for future power electronics due to their exceptional properties. They exhibit large bandgaps, high breakdown fields, high thermal conductivity, and high mechanical strengths. AlN and BN have been extensively researched, however, their alloys, B x Al 1− x N, are much less studied despite their ability to offer tunable properties by adjusting x . In this article, the electronic properties of 17 recently predicted ground states of B x Al 1− x N in the x = 0 − 1 range are predicted using first‐principles density functional theory and many‐body perturbation theory within GW approximation. All the B x Al 1− x N structures are found to be UWBG materials and have bandgaps that vary linearly from that of wurtzite‐phase ( w ) AlN (6.19 eV) to that of w ‐BN (7.47 eV). The bandstructures of B x Al 1− x N show that a direct‐to‐indirect bandgap crossover occurs near x = 0.25. Furthermore, it is found that B x Al 1− x N alloys have much larger dielectric constants than the constituent bulk materials (AlN = 9.3 ɛ 0 or BN = 7.3 ɛ 0 ), with values reaching as high as 12.1 ɛ 0 . These alloys are found to exhibit large dielectric breakdown fields in the range 9–35 MV cm −1 with a linear dependence on x . This work provides the much needed advancement in the understanding of the properties of B x Al 1− x N to aid their application in next‐generation devices.

Milne, Cody L.↗
DOE OSTI2024

Enhanced UV–Vis Rejection Ratio in Metal/BaTiO 3 /β–Ga 2 O 3 Solar–Blind Photodetectors

The fabrication and characterization of metal/BaTiO 3 /β-Ga 2 O 3 solar-blind photodetectors are reported. β-Ga 2 O 3 is a promising material for solar-blind photodetectors due to its large bandgap and the availability of low defect-density melt-grown substrates. In this work, structures are introduced that employ high-permittivity dielectric/semiconductor heterojunctions to enhance the performance of a Schottky photodetector. It is shown that integrating the high-k dielectric BaTiO 3 reduces the dark current by ≈10 4 , all but eliminates illumination induced Schottky barrier lowering, and increases the UV–vis rejection ratio by a factor greater than 9 × 10 3 compared to a Schottky photodetector. It is hypothesized that the high permittivity of the dielectric overcomes the influence of self-trapped holes in Ga 2 O 3 to reduce the peak electric field at the dielectric/metal interface, thereby eliminating the effects of Schottky barrier lowering on illuminated β-Ga 2 O 3 photodetectors. Additionally, it is hypothesized that the increase in the UV–vis rejection ratio is caused by the “dead layer” that forms at the BaTiO 3 /Pt interface.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exciton Binding Energy in Organic Polymers: Experimental Considerations and Tuning Prospects

Discrepancies in reported values of exciton binding energy (E b ) for organic semiconductors (OSs) necessitate a comprehensive study. Traditionally, E b is defined as the difference between the transport gap (E t ) and the optical gap (E opt ). Here, the E b values of PBnDT‐TAZ polymer variants are determined using two commonly employed methods: a combination of ultraviolet photoemission spectroscopy and low‐energy inverse photoemission spectroscopy (UPS‐LEIPS) and solid‐state cyclic voltammetry (CV). E b values obtained by UPS‐LEIPS show low dispersion and no clear correlation with the polymer structure and thedielectric properties. In contrast, CV reveals a larger dispersion (200 meV‐1 eV) and an apparent qualitative E b ‐molecular structure correlation, as the lowest E b values are observed for oligo‐ethylene glycol side chains. This discrepancy is discussed by examining the implications of the traditional definition of E b . Additionally, the impact of both intrinsic and extrinsic factors contributing to the derived experimental values of E t is discussed. The differences in intrinsic and extrinsic factors highlight the context‐dependent nature of measurement when drawing global conclusions. Notably, the observed E b trend derived from CV is not intrinsic to the pure materials but likely linked to electrolyte swelling and associated changes in dielectric environment, suggesting that high‐efficiency single‐material organic photovoltaics with low E b may be possible via high dielectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Modeling of Radiative Emission from Shallow Color Centers in Single Crystalline Diamond

Optically active defects in diamond are widely used as bright single-photon sources for quantum sensing, computing, and communication. For many applications, it is useful to place the emitter close to the diamond surface, where the radiative properties of the emitter are strongly modified by its dielectric environment. It is well-known that the radiative power from an electric dipole decreases as the emitter approaches an interface with a lower-index dielectric, leading to an increase in the radiative lifetime. For emitters in crystalline solids, modeling of this effect needs to take into account the crystal orientation and direction of the surface cut, which can greatly impact the emission characteristics. In this paper, a framework for analyzing the emission rates of shallow (<100 nm) defects is provided, in which optical transitions are derived from electric dipoles in a plane perpendicular to their spin axis. The calculations for the depth-dependent radiative lifetime for color centers in (100)-, (110)-, and (111)-cut diamond are presented, which can be extended to other vacancy defects in diamond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Hybrid of multi‐dimensional fillers for thermally enhanced polyamide 12 composites fabricated by selective laser sintering

Abstract Selective laser sintering (SLS) is an additive manufacturing technology that can provide a novel strategy to manufacture complex polymer‐based composites with tailored properties. In this study, polyamide 12 (PA12) composite powders based on Al 2 O 3 , boron nitride (BN), and carbon nanotubes (CNTs) were prepared via a two‐step mixing approach. Morphology characterization techniques indicated that the fillers were uniformly dispersed in the PA12 matrix as expected. Under the optimum 3D‐printing parameters, the fabrication of SLS parts with high filler loading could be obtained. With 40 wt% Al 2 O 3 , 8 wt% BN, and 2 wt% CNT hybrid fillers, the thermal conductivity of PA12 composites could reach 1.09 W/mK. It could be attributed to the synergistic effect of multi‐dimensional fillers to form dense and continuous thermal conduction paths. The factors influencing the performance of PA12 composites such as melting and crystallization behaviors, dielectric properties, and mechanical properties were also discussed. The results show that these composites have favorable dielectric and mechanical properties. Overall, the PA12 composites fabricated by SLS technology in this study exhibit excellent thermal management ability.

Yuan, Yue↗
DOE OSTI2025

A Spatially Resolved Evaluation of Accelerated Environmental Aging on Emerging Polypropylene-Based Photovoltaic Backsheets Using Raman Spectroscopy

For this work, accelerated aging was used to assess environmental degradation in emerging co-extruded polypropylene (PP)-based backsheets under three different environmental conditions (65°C/20% relative humidity (RH), 75°C/20% RH, and 75°C/50% RH). Although differential scanning calorimetry did not measure crystallinity changes with exposure, spatially resolved Raman spectroscopy identified crystallinity increases in the core layer of aged samples, indicating a heterogeneous postcrystallization process. The Raman results were in agreement with synchrotron-based microfocused wide-angle X-ray scattering measurements. Cross-sectional nanoindentation was used to correlate localized crystallinity shifts with changes in Young's modulus. A similar trend was found where increased modulus was measured in the core layer, supporting the relationship between modulus and crystallinity. Finally, dielectric characterization was used to assess the impact of these material property changes on performance. While changes in the backsheet material properties and dielectric performance were observed with accelerated aging, these shifts generally equilibrated with time, indicating overall stability in response to environmental stressors. Additionally, the identified heterogeneous material property changes indicate that spatially resolved crystallinity measurements may be a valuable early failure indicator to be used in the assessment of PV backsheet long-term durability.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Poisson–Nernst–Planck Model of Ion Transport and Interface Segregation in Metal–Insulator–Semiconductor Structures and Solar Cells

A numerical model that describes the transport of mobile ionic species in metal–insulator–semiconductor (MIS) and photovoltaic (PV) devices subject to temperature and voltage stress is presented. The finite element method (FEM) is used to solve the Nernst–Planck equation while imposing Poisson's equation self-consistently as a restriction for the electrostatic potential. This allows the contribution of the ionic species to the potential to be taken into account. Using a variational formulation eases the implementation of diverse boundary conditions, including the incorporation of segregation kinetics at the device interfaces. Segregation across the dielectric–semiconductor interface is relevant to modeling the electronic device degradation in systems where contamination reaches the semiconductor. The model in closed systems with no-flux boundary conditions is validated first. In the limiting case of low contamination levels with respect to the gate bias, the FEM solution matches analytically derived approximations. Then, the implementation is broadened to include an open boundary at the dielectric–semiconductor interface to account for leakage of ions. The predicted time dependence of the flatband voltage in Na-contaminated MIS test structures agrees well with measurements. This model successfully captures the role of long-range ion transport at concentrations of relevance to electronic and PV device instability and neuromorphic computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Signal Origin of Electrochemical Strain Microscopy and Link to Local Chemical Distribution in Solid State Electrolytes

Electrochemical strain microscopy (ESM) is a distinguished method to characterize Li-ion mobility in energy materials with extremely high spatial resolution. The exact origin of the cantilever deflection when the technique is applied on solid state electrolytes (SSEs) is currently discussed in the literature. Under-standing local properties and influences on ion mobility in SSEs is of utmost importance to improve such materials for next generation batteries. Here, the exact signal formation process of ESM when applied on sodium super ionic conductor (NASICON)-type SSE containing Na- and Li-ions is investigated. Changes in the dielectric properties, which are linked to the local chemical composition, are found to be responsible for the observed contrast in the deflection of the cantilever instead of a physical volume change as a result of Vegard´s Law. The cantilever response is strongly reduced in areas of high sodium content which is attributed to a reduction of the tip-sample capacitance in comparison to areas with high lithium content. This is the first time a direct link between electrostatic forces in contact mode and local chemical information is demonstrated on SSEs. Furthermore, the results open up new possibilities in information gain since dielectric proper-ties are sensitive to subtle changes in local chemical composition.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Self‐Assembled Monolayer Templating for Engineered Nanopinholes in Passivated Contact Solar Cells

We present a novel self-assembled monolayer (SAM)-based technique to make nanopinhole-enabled passivated contacts on silicon solar cells by tuning the SAM coverage area and etch selectivity. We deposit trimethyl-silyl Si(CH 3 ) 3 groups using hexamethyldisilazane (HMDS) as the precursor over passivating dielectric layers and their stacks (SiO 2 , SiN x , SiO 2 /SiN x ) and interrupt the HMDS attachment chemistry shortly before a full monolayer is formed on its surface. Subsequent etching in dilute HF produces pinholes through the dielectric layers due to the higher etch resistance of the SAM to HF etching. The pinhole areal density (10 4 –10 8 /cm 2 ) and size (10–1000 nm) can be tuned both by duration of HMDS attachment and HF etch time. Pinholes were characterized by atomic force microscopy, tetramethylammonium hydroxide (TMAH) selective etch, and Ag decoration by electroless plating. Polysilicon (poly-Si) passivated contacts enabled by pinholes were formed by subsequent deposition of doped amorphous silicon (a-Si:H) followed by thermal crystallization and dopant drive-in. At optimal areal pinhole density ≈10 7 /cm 2 , contacts exhibit both passivation and carrier transport via pinholes as evidenced by electron beam induced current, transmission line measurements, and carrier lifetime measurements. Solar cells based with these pinhole contacts show V oc = 723 mV and FF = 80.3%. The remaining SAM layer does not affect device performance.

14 SOLAR ENERGY↗
DOE OSTI2024

Structural metamaterials with innate capacitive and resistive sensing

Interpenetrating lattices consist of two or more interwoven but physically separate sub-lattices with unique behaviors derived from their multi-body construction. If the sublattices are constructed or coated with an electrically conducting material, the close proximity and high surface area of the electrically isolated conductors allow the two lattices to interact electromagnetically either across the initial dielectric filled gap or through physical contact. Furthermore, changes in the size of the dielectric gap between the sub-lattices induced by deformation can be measured via capacitance or resistance, allowing a structurally competent lattice to operate as a force or deformation sensor. In addition to resistive and capacitive deformation sensing, this work explores capacitance as a fundamental metamaterial property and the environmental sensing behaviors of interpenetrating lattices.

Computational Solid Mechanics↗
DOE OSTI2022

The Simulation and Design of an On-Chip Superconducting Millimetre Filter-Bank Spectrometer

Abstract Superconducting on-chip filter banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and submillimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $$\lambda /2$$ λ / 2 microstrip resonator to define a narrow ( $$\lambda /\Delta \lambda = 300$$ λ / Δ λ = 300 ) spectral pass band, the filtered output of a given spectrometer channel directly connects to a lumped-element kinetic inductance detector. We show the tolerance analysis of our design, demonstrating $$<11\%$$ < 11 % change in filter quality factor to any one realistic fabrication error and a full filter-bank efficiency forecast to be 50% after accounting for fabrication errors and dielectric loss tangent.

Robson, G. (ORCID:0000000315279326)↗
DOE OSTI2023

Non-Oxidative Ethane Dehydrogenation in a Packed-Bed DBD Plasma Reactor

Abstract Plasma-assisted conversion of ethane (C 2 H 6 ) can produce value-added chemical building blocks using green electricity. Here we employ a simple packed-bed coaxial dielectric barrier discharge (DBD) reactor to convert C 2 H 6 at mild operating conditions unattainable by conventional thermocatalysis. Ethylene (C 2 H 4 ), acetylene (C 2 H 2 ), and methane (CH 4 ) are the main products along with small fractions of C 3 and C 4 hydrocarbons. Interestingly, the C 2 H 4 selectivity is primarily correlated to C 2 H 6 conversion, dominated by electron dissociation and recombination reactions irrespective of the dielectric properties of the packed bed material (SiO 2 , Al 2 O 3 , ZrO 2 , TiO 2 , and BaTiO 3 ), packing material size, supplied power, and C 2 H 6 concentration. While a distortion of the electric field and discharge propagation results in varying dissipated power as materials change, the C 2 H 4 energy yield remains constant. The particle size appears to affect conversion mainly due to pressure alterations. Pd/SiO 2 catalyst can change the selectivity, favoring saturated species by expending hydrogen.

Engineering↗
DOE OSTI2023

Temperature Inhibition of Plasma-Driven Methane Conversion in DBD Systems

Low-temperature non-thermal plasmas produce highly reactive chemical environments made up of electrons, ions, radicals, and vibrationally excited molecules. These reactive species, when combined with catalysts, can help drive thermodynamically unfavorable chemical reactions at low temperatures and atmospheric pressure. The conversion of methane (CH 4 ) to produce other value-added chemicals is a good model system because of its applicability to a wide range of industries. To effectively create these plasma catalytic systems, a fundamental understanding of the plasma-phase chemistry alone is imperative. While there have been many studies on methane plasmas and how certain operating conditions (i.e., gas composition and power) affect the plasma, there is limited understanding on how changing bulk reaction temperature affects the plasma properties and ensuing plasma chemistry. Here, in this work, we use a dielectric barrier discharge to investigate the effects of temperature on the reaction chemistry and the plasma’s electrical properties in various methane-gas mixtures. Results show that increasing temperature leads to a reduction in methane conversion as well as changes to both the gas and dielectric material pre-breakdown, which manifests itself in temperature-dependent electrical properties of the plasma. Experiments at various temperatures and power show a positive correlation between key electrical plasma properties (average charge and lifetime per filament) and the measured methane conversion as a function of temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Asymmetrical cavity design that bypasses mode mixings in axion haloscope experiments

Microwave cavities used in axion haloscope experiments typically employ a tuning rod as a means to widen the range of resonance frequencies at which it is sensitive to axion-to-photon conversion. A realistic tuning mechanism requires a gap between the cavity end caps and the tuning rod to ensure movement, and causes some modes to hybridize with the resonant mode that is being tracked for the experiment. These so-called mode mixings lead to gaps in the frequency range that practically lose sensitivity to axions. Here, to solve this problem, we present a cavity design which, for two tuning rod configurations corresponding to a lower and higher frequency range, have a dielectric rod inserted at a specific location that makes the cavity asymmetrical. Moving the tuning rod closer to the dielectric insert changes the location and frequency of the mode mixing compared to when it is farther away from it. This design is easily realizable in practical experiments and makes possible an axion dark matter search with minimal loss in sensitivity due to mode mixings. We also show that the same design has the same desired effect when cavity dimensions are scaled down to be smaller and are at higher resonance frequencies.

Axion↗
DOE OSTI2025

Switching kinetics in ferroelectric zinc magnesium oxide thin films

The switching kinetics of RF-magnetron reactively sputtered ~200 nm thick Zn 1-x Mg x O (ZMO) ferroelectric thin films with x = 0.41 and x = 0.27 prepared on Pt/Ti/SiO 2 /Si substrates were studied at applied fields near the coercive fields, ranging from 3.4 to 5.1 MV cm -1 , and at temperatures ranging from room temperature to 100 °C. Polarization reversal in ZMO followss the Kolmogorov-Avrami-Ishibashi kinetics model for nucleation and growth at applied fields near the coercive field, and obeys an individual column switching (ICS) model at higher applied fields required to switch most of the spontaneous polarization. Switching in the high-applied field regime can be described using either the Gaussian or inverse gamma distribution functions depending on the mole fraction of magnesium in the film. The switching current transients of the high-Mg content ZMO film (x = 0.41) are always bi-modal, whereas the low Mg composition film (x = 0.27) is described by the Gaussian distribution initially following wake-up, and becomes bimodal with continued cycling. Rayleigh-like behavior of the dielectric constant revealed a simultaneous increase of the irreversible and decrease of the reversible contributions to the dielectric constant, which was ascribed to an increase in the density of mobile domain walls with cycling and resulted in faster switching.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Experimental and analytical study of the hydrodynamic and single and two-phase convective heat transfer performance of flexible PDMS microchannels with micropillar arrays

Various copper and silicon based thermal management systems are used in the cooling of electronics. However, the rigid nature of these materials along with their high thermal and electrical conductivity pose a difficulty in developing direct contact embedded flexible cooling systems that can offer robust cooling performance. The low density, thermal stability, chemical inertness, and electrical insulation of Polydimethylsiloxane (PDMS) make it an ideal material to develop lightweight direct contact thermal management systems for electronics. Its ease of fabrication with tunable flexibility provides the opportunity to go beyond traditional electronics and develop advanced active and passive thermal management systems for a wide–range of applications in foldable and wearable electronics, liquid cooling garments, microgravity, and electric motors. In this study, a flexible PDMS based microchannel with micropillar arrays, which enhance the thermal performance of the device through capillary-assisted flow, has been developed. The hydrodynamic and convection heat transfer performance of three PDMS wick pillar geometries, ranging from a porosity of 0.8–0.91, are investigated and compared under single-phase and two-phase conditions. Dielectric coolant FC-3283 is employed and permeability measurements are made for mass fluxes ranging from 53 kg/m 2 s to 369 kg/m 2 s. Given its conformability, the device demonstrates a deviation from Darcy’s Law, within the laminar regime, with an increasing permeability with mass flux at the rate of ~0.5–0.8 Darcy/(kg/m 2 s). A semi-analytical model has been developed and reported to quantify the conformability of the device. The heat transfer performance is experimentally evaluated using the same dielectric fluid for mass flux ranging from 105 kg/m 2 s to 420 kg/m 2 s with heat fluxes ranging from 1.5 W/cm 2 to 16 W/cm 2 . Heat transfer coefficients of up to 7000 W/m 2 K are observed, which are comparable to copper and silicon microchannels. The effect of porosity on the single phase thermal performance has been evaluated against the pumping power to provide a basis for thermal management system design. Finally, high-speed imaging is performed to study the two-phase flow characteristics to provide insight into the vapor formation and removal.

42 ENGINEERING↗
DOE OSTI2021

Electronic and optical properties of plutonium metal and oxides from Reflection Electron Energy Loss Spectroscopy

Reflection Electron Energy Loss Spectra (REELS) have been acquired on plutonium δ-Pu-Ga alloys, α-Pu 2 O 3 and PuO 2 . The position of the peaks attributable to the Pu 6p excitation can be used as ‘fingerprint’ for these species. X-ray Photoelectron Spectroscopy has been used to aid interpretation of the REELS spectra. The band gap of PuO 2 was determined from the onset of the energy loss in the REELS spectrum. The REELS data have been evaluated within the dielectric response theory by means of the QUEELS-ε(k, w)-REELS software. In this work, the Energy Loss Function, dielectric function, refractive index and extinction coefficient for these materials have been determined in the ultraviolet and extreme ultraviolet range and are compared to previously reported results.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Solvent effects on the heterogeneous growth of TiO 2 nanostructure arrays by solvothermal synthesis

One-dimensional titanium dioxide (TiO 2 ) nanostructure arrays (nanoarrays) are important metal oxide nanomaterials that can be synthesized via facile solvothermal methods. The properties of the organic solvents can impose significant effects on the microstructures and properties of the final products. However, the discussions were limited to the homogeneously nucleated TiO 2 nanomaterials in free-standing powder form, while the solvent effects are less understood during the heterogeneous growth of TiO 2 nanoarrays on a substrate surface. In this work, six organic compounds, namely 2-butanone, n-decane, n-hexane, toluene, ethylene glycol and ethanol, were selected as the solvents for the solvothermal synthesis of TiO 2 nanoarrays on the cordierite monolithic substrates. Special attentions are paid to the morphology, crystallinity, specific surface area, and porosity of the samples. The heterogeneous growth of TiO 2 nanoarrays on substrate surfaces is found to favor the solvents with moderate dielectric constants, which can be partially dissolved in the aqueous solution and modulate the reaction rate during the solvothermal synthesis. Organic solvents with low dielectric constants may result in a complete separation between the precursors and aqueous solution, and therefore slow down the overall reaction, causing the insufficient growth of the nanoarrays. The TiO 2 nanoarrays are obtained with optimum morphology from the combination of 2-butanone and titanium (IV) butoxide as solvent and precusor, respectively, with a high specific surface area up to 56 m 2 /g including cordierite substrate given a micron thickness. When loaded with Pt catalyst, the TiO 2 nanoarray-based monolithic catalysts show excellent low-temperature catalytic activity and hydrothermal stability for the CO and hydrocarbon oxidation under the simulated exhausted conditions. This article shall shed light on a better understanding of the growth mechanism and rational design of TiO 2 nanoarrays for high-performance catalytic converters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗