Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data quality issues”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Validating deep learning inference during chest X-ray classification for COVID-19 screening

Abstract The new coronavirus unleashed a worldwide pandemic in early 2020, and a fatality rate several times that of the flu. As the number of infections soared, and capabilities for testing lagged behind, chest X-ray (CXR) imaging became more relevant in the early diagnosis and treatment planning for patients with suspected or confirmed COVID-19 infection. In a few weeks, proposed new methods for lung screening using deep learning rapidly appeared, while quality assurance discussions lagged behind. This paper proposes a set of protocols to validate deep learning algorithms, including our ROI Hide-and-Seek protocol, which emphasizes or hides key regions of interest from CXR data. Our protocol allows assessing the classification performance for anomaly detection and its correlation to radiological signatures, an important issue overlooked in several deep learning approaches proposed so far. By running a set of systematic tests over CXR representations using public image datasets, we demonstrate the weaknesses of current techniques and offer perspectives on the advantages and limitations of automated radiography analysis when using heterogeneous data sources.

59 BASIC BIOLOGICAL SCIENCES↗

Recording the synchrotron radiation by a picosecond streak camera for bunch diagnostics in cyclic accelerators

A PS-1/S1 picosecond streak camera with a linear sweep is used to measure temporal characteristics of synchrotron radiation pulses on a damping ring (DR) at the Budker Institute of Nuclear Physics (BINP) of the Siberian Branch of the Russian Academy of Sciences (Novosibirsk). The data obtained allow a conclusion as to the formation processes of electron bunches and their 'quality' in the DR after injection from the linear accelerator. The expediency of employing the streak camera as a part of an optical diagnostic accelerator complex for adjusting the injection from a linear accelerator is shown. Discussed is the issue of designing a new-generation dissector with a time resolution up to a few picoseconds, which would allow implementation of a continuous bunch monitoring in the DR during mutual work with the electron-positron colliders at the BINP. (acoustooptics)

43 PARTICLE ACCELERATORS↗

Analysis of differences in the ENDL99 and ENDL2009 nuclear data libraries pertaining to 238 U

A careful analysis is performed on the differences exhibited in the evaluated elastic and inelastic channels between the ENDL99 and ENDL2009 libraries for neutrons incident on 238 U. The two libraries are compared with experimental data as well as results obtained from calculations utilizing a new Hauser-Feshbach reaction code and two modern, high-quality optical potentials. Overall, the ENDL2009 evaluation is found to be more physical, and a better representation of experimental data. The only exception is that the angular distributions for the elastic channel in the ENDL99 library are in better agreement at backward angles for incident neutron energies in the range 0.7-1.3 MeV. Other issues with the inelastic scattering data in ENDL2009 are pointed out.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Performance Evaluation of the Operational Air Quality Monitor for Water Testing Aboard the International Space Station

Real-time environmental monitoring on ISS is necessary to provide data in a timely fashion and to help ensure astronaut health. Current real-time water TOC monitoring provides high-quality trending information, but compound-specific data is needed. The combination of ETV with the AQM showed that compounds of interest could be liberated from water and analyzed in the same manner as air sampling. Calibration of the AQM using water samples allowed for the quantitative analysis of ISS archival samples. Some calibration issues remain, but the excellent accuracy of DMSD indicates that ETV holds promise for as a sample introduction method for water analysis in spaceflight.

Wallace, William T.↗

Using Salmon as a Bio-indicator of the Health of the Columbia River at Hanford - 15534

Assessing human, ecological, and cultural health and well-being on- and off-site is an important aspect of managing legacy wastes and environmental remediation on U.S. Department of Energy sites. Such an assessment is especially important at places such as Hanford because the Columbia River runs through the site. The Columbia River is central to the culture and economy of the northwest, especially to the Tribes. While a full range of other bio-indicators are used to determine the health of the river with respect to contaminants, salmon are the iconic, keystone species in the Columbia River of concern to the full range of regulators, managers, Tribes, and the public. A bio-monitoring plan that will assure the public and others that the activities of DOE are not adversely impacting the salmon populations in the Columbia River is critical for long term stewardship, both of the Hanford Site and the River and its resources Numerous factors affect salmon populations, including different life stages, habitat variables, and anthropogenic effects, including hexavalent chromium. Based on a literature review of the factors affecting populations, a conceptual model was developed for effects on salmon population stability. Salmon have a life history that includes laying eggs in gravel (redds) at the river bottom and then spending several life stages in fresh water and maturing in saltwater before they return to their natal streams or rivers to breed. All of these phases are potentially vulnerable to a range of natural and anthropogenic factors. Eggs in redds in the river bottom are vulnerable to water erosion, dewatering, oxygen levels, predators, and contaminants, while juveniles (fry, parr, smolts) are vulnerable to water currents, oxygen levels, predators, contaminants, and negotiating dams. When adults return to the river up to 7 years later, they face these same factors, as well as intense fishing pressures. The major factor affecting salmon populations may well be the fight to swim upstream, around dams, to reach traditional spawning grounds. While the data provided in this study relate to salmon at Hanford, the overall conceptual framework provides a paradigm for evaluating other sensitive indicators at other Department of Energy sites. The framework provides a method to insure the Tribes and public that the health and well-being of an important economic, cultural, and aesthetic species is being adequately addressed, and suggests the types of data needed to address the issue. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improving the trust in results of numerical simulations and scientific data analytics

This white paper investigates several key aspects of the trust that a user can give to the results of numerical simulations and scientific data analytics. In this document, the notion of trust is related to the integrity of numerical simulations and data analytics applications. This white paper complements the DOE ASCR report on Cybersecurity for Scientific Computing Integrity by (1) exploring the sources of trust loss; (2) reviewing the definitions of trust in several areas; (3) providing numerous cases of result alteration, some of them leading to catastrophic failures; (4) examining the current notion of trust in numerical simulation and scientific data analytics; (5) providing a gap analysis; and (6) suggesting two important research directions and their respective research topics. To simplify the presentation without loss of generality, we consider that trust in results can be lost (or the results’ integrity impaired) because of any form of corruption happening during the execution of the numerical simulation or the data analytics application. In general, the sources of such corruption are threefold: errors, bugs, and attacks. Current applications are already using techniques to deal with different types of corruption. However, not all potential corruptions are covered by these techniques. We firmly believe that the current level of trust that a user has in the results is at least partially founded on ignorance of this issue or the hope that no undetected corruptions will occur during the execution. This white paper explores the notion of trust and suggests recommendations for developing a more scientifically grounded notion of trust in numerical simulation and scientific data analytics. We first formulate the problem and show that it goes beyond previous questions regarding the quality of results such as V&V, uncertainly quantification, and data assimilation. We then explore the complexity of this difficult problem, and we sketch complementary general approaches to address it. This paper does not focus on the trust that the execution will actually complete. The product of simulation or of data analytic executions is the final element of a potentially long chain of transformations, where each stage has the potential to introduce harmful corruptions. These corruptions may produce results that deviate from the user-expected accuracy without notifying the user of this deviation. There are many potential sources of corruption before and during the execution; consequently, in this white paper we do not focus on the protection of the end result after the execution.

97 MATHEMATICS AND COMPUTING↗

Self-Evolving Machine: A Continuously Improving Model for Molecular Thermochemistry

Because collecting precise and accurate chemistry data is often challenging, chemistry data sets usually only span a small region of chemical space, which limits the performance and the scope of applicability of data-driven models. To address this issue, we integrated an active learning machine with automatic ab initio calculations to form a self-evolving model that can continuously adapt to new species appointed by the users. In the present work, we demonstrate the self-evolving concept by modeling the formation enthalpies of stable closed-shell polycyclic species calculated at the B3LYP/6-31G(2df,p) level of theory. By combining a molecular graph convolutional neural network with a dropout training strategy, the model we developed can predict density functional theory (DFT) enthalpies for a broad range of polycyclic species and assess the quality of each predicted value. For the species which the current model is uncertain about, the automatic ab initio calculations provide additional training data to improve the performance of the model. For a test set composed of 2858 cyclic and polycyclic hydrocarbons and oxygenates, the enthalpies predicted by the model agree with the reference DFT values with a root-mean-square error of 2.62 kcal/mol. Finally, we found that a model originally trained on hydrocarbons and oxygenates can broaden its prediction coverage to nitrogen-containing species via an active learning process, suggesting that the continuous learning strategy is not only able to improve the model accuracy but is also capable of expanding the predictive capacity of a model to unseen species domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field Geologic Observation and Sample Collection Strategies for Planetary Surface Exploration: Insights from the 2010 Desert RATS Geologist Crewmembers

Observation is the primary role of all field geologists, and geologic observations put into an evolving conceptual context will be the most important data stream that will be relayed to Earth during a planetary exploration mission. Sample collection is also an important planetary field activity, and its success is closely tied to the quality of contextual observations. To test protocols for doing effective planetary geologic field- work, the Desert RATS(Research and Technology Studies) project deployed two prototype rovers for two weeks of simulated exploratory traverses in the San Francisco volcanic field of northern Arizona. The authors of this paper represent the geologist crew members who participated in the 2010 field test.We document the procedures adopted for Desert RATS 2010 and report on our experiences regarding these protocols. Careful consideration must be made of various issues that impact the interplay between field geologic observations and sample collection, including time management; strategies relatedtoduplicationofsamplesandobservations;logisticalconstraintson the volume and mass of samples and the volume/transfer of data collected; and paradigms for evaluation of mission success. We find that the 2010 field protocols brought to light important aspects of each of these issues, and we recommend best practices and modifications to training and operational protocols to address them. Underlying our recommendations is the recognition that the capacity of the crew to flexibly execute their activities is paramount. Careful design of mission parameters, especially field geologic protocols, is critical for enabling the crews to successfully meet their science objectives.

Hurtado, Jose M., Jr.↗

Energy dataset of Frontier supercomputer for waste heat recovery

The Hewlett Packard Enterprise–Cray EX Frontier is the world’s first and fastest exascale supercomputer, hosted at the Oak Ridge Leadership Computing Facility in Tennessee, United States. Frontier is a significant electricity consumer, drawing 8–30 MW; this massive energy demand produces significant waste heat, requiring extensive cooling measures. Although harnessing this waste heat for campus heating is a sustainability goal at Oak Ridge National Laboratory (ORNL), the 30 °C–38 °C waste heat temperature poses compatibility issues with standard HVAC systems. Heat pump systems, prevalent in residential settings and some industries, can efficiently upgrade low-quality heat to usable energy for buildings. Thus, heat pump technology powered by renewable electricity offers an efficient, cost-effective solution for substantial waste heat recovery. However, a major challenge is the absence of benchmark data on high-performance computing (HPC) heat generation and waste heat profiles. This paper reports power demand and waste heat measurements from an ORNL HPC data centre, aiming to guide future research on optimizing waste heat recovery in large-scale data centres, especially those of HPC calibre.

97 MATHEMATICS AND COMPUTING↗

Determining the anisotropy and exchange parameters of polycrystalline spin-1 magnets

Abstract Although low-dimensional S = 1 antiferromagnets remain of great interest, difficulty in obtaining high-quality single crystals of the newest materials hinders experimental research in this area. Polycrystalline samples are more readily produced, but there are inherent problems in extracting the magnetic properties of anisotropic systems from powder data. Following a discussion of the effect of powder-averaging on various measurement techniques, we present a methodology to overcome this issue using thermodynamic measurements. In particular we focus on whether it is possible to characterise the magnetic properties of polycrystalline, anisotropic samples using readily available laboratory equipment. We test the efficacy of our method using the magnets [Ni(H 2 O) 2 (3,5-lutidine) 4 ](BF 4 ) 2 and Ni(H 2 O) 2 (acetate) 2 (4-picoline) 2 , which have negligible exchange interactions, as well as the antiferromagnet [Ni(H 2 O) 2 (pyrazine) 2 ](BF 4 ) 2 , and show that we are able to extract the anisotropy parameters in each case. The results obtained from the thermodynamic measurements are checked against electron-spin resonance and neutron diffraction. We also present a density functional method, which incorporates spin–orbit coupling to estimate the size of the anisotropy in [Ni(H 2 O) 2 (pyrazine) 2 ](BF 4 ) 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Architecture and evolution of Goddard Space Flight Center Distributed Active Archive Center

The Goddard Space Flight Center (GSFC) Distributed Active Archive Center (DAAC) has been developed to enhance Earth Science research by improved access to remote sensor earth science data. Building and operating an archive, even one of a moderate size (a few Terabytes), is a challenging task. One of the critical components of this system is Unitree, the Hierarchical File Storage Management System. Unitree, selected two years ago as the best available solution, requires constant system administrative support. It is not always suitable as an archive and distribution data center, and has moderate performance. The Data Archive and Distribution System (DADS) software developed to monitor, manage, and automate the ingestion, archive, and distribution functions turned out to be more challenging than anticipated. Having the software and tools is not sufficient to succeed. Human interaction within the system must be fully understood to improve efficiency to improve efficiency and ensure that the right tools are developed. One of the lessons learned is that the operability, reliability, and performance aspects should be thoroughly addressed in the initial design. However, the GSFC DAAC has demonstrated that it is capable of distributing over 40 GB per day. A backup system to archive a second copy of all data ingested is under development. This backup system will be used not only for disaster recovery but will also replace the main archive when it is unavailable during maintenance or hardware replacement. The GSFC DAAC has put a strong emphasis on quality at all level of its organization. A Quality team has also been formed to identify quality issues and to propose improvements. The DAAC has conducted numerous tests to benchmark the performance of the system. These tests proved to be extremely useful in identifying bottlenecks and deficiencies in operational procedures.

Bedet, Jean-Jacques↗

3D vertical seismic profile acquired with distributed acoustic sensing on tubing installation: A case study from the CO2CRC Otway Project

Distributed acoustic sensing (DAS) can revolutionize the seismic industry by using fiber-optic cables installed permanently to acquire on-demand vertical seismic profile (VSP) data at fine spatial sampling. With this, DAS can solve some of the issues associated with conventional seismic sensors. Studies have successfully demonstrated the use of DAS on cemented fibers for monitoring applications; however, such applications on tubing-deployed fibers are relatively uncommon. Application of tubing-deployed fibers is especially useful for preexisting wells, where there is no opportunity to install a fiber behind the casing. In the CO2CRC Otway Project, we acquired a 3D DAS VSP using a standard fiber-optic cable installed on the production tubing of the injector well. We aim to analyze the quality of the 3D DAS VSP on tubing, as well as discuss lessons learned from the current DAS deployment. We find the limitations associated with the DAS on tubing, as well as ways to improve the quality of the data sets for future surveys at Otway. Due to the reduced coupling and the long fiber length (approximately 20 km), the raw DAS records indicate a high level of noise relative to the signal. Despite the limitations, the migrated 3D DAS VSP data recorded by cable installed on tubing are able to image interfaces beyond the injection depth. Furthermore, we determine that the signal-to-noise ratio might be improved by reducing the fiber length.

3D↗

GSFC OSTM, Jason-l and TOPEX POD Update

The OSTM (Jason-2) has been in orbit for three years (since June 2008), and the full suite of altimeter data from TOPEX/Poseidon, Jason-I and Jason-2 now span nearly twenty years since the launch of TOPEX in 1992. Issues that affect the stability of the orbits through time and the orbit accuracy include the reference frame, the radiation pressure models for the altimeter satellites and the fidelity of the dynamic force model, including time-variable gravity, as well as the performance of the individual tracking systems. We have conducted detailed analyses of the new ITRF2008 reference frame and find only a small effect on global mean sea level compared to ITRF2005, although we note an improvement in POD quality over the most recent time periods for Jason-2. In the past year we have developed a new time series of orbits for TOPEX/Poseidon, Jason-I, and Jason-2 based on the ITRF2008 reference frame using SLR and DORIS data and for Jason-2 using GPS data. In addition, we have continued to experiment with improvements to the radiation pressure model for the altimeter satellites in particular the Jason satellites since these nonconservative force model errors now rank as the most outstanding source of error on altimeter satellite POD. In the previous (ITRF2005-based) and current (ITRF2008-based) orbits we have relied on a simplified time-variable gravity (TVG) model, derived from GRACE solutions. We have recently experimented with improvements using higher fidelity TVG models (both temporally and spatially) and report on the results. We have computed a time series of GPS-only reduced-dynamic orbits at GSFC, and used these in conjunction with the SLR-DORIS dynamic and reduced-dynamic orbits to assess reference fiame stability with respect to the different tracking systems for both ITRF2005 and ITRF2008. We show through internal (GSFConly) and external comparisons (with other analysis centers) that the radial orbit accuracy for Jason-2 remains at I cm.

Lemoine, Frank G.↗

Developing GIOVANNI-based Online Prototypes to Intercompare TRMM-Related Global Gridded-Precipitation Products

New online prototypes have been developed to extend and enhance the previous effort by facilitating investigation of product characteristics and intercomparison of precipitation products in different algorithms as well as in different versions at different spatial scales ranging from local to global without downloading data and software. Several popular Tropical Rainfall Measuring Mission (TRMM) products and the TRMM Composite Climatology are included. In addition, users can download customized data in several popular formats for further analysis. Examples show product quality problems and differences in several monthly precipitation products. It is seen that differences in daily and monthly precipitation products are distributed unevenly in space and it is necessary to have tools such as those presented here for customized and detailed investigations. A simple time series and two area maps allow the discovery of abnormal values of 3A25 in one of the months. An example shows a V-shaped valley issue in the Version 6 3B43 time series and another example shows a sudden drop in 3A25 monthly rain rate, all of which provide important information when the products are used for long-term trend studies. Future plans include adding more products and statistical functionality in the prototypes.

data analysis↗

STS-51, RSRM-033, 360T033 KSC processing configuration and data report

KSC Processing Configuration and Data Report is being provided as a historical document and as an enhancement to future RSRM manufacturing and processing operations. The following sections provide information on segment receipt, aft booster build up, motor assembly, and closeout for STS-51, RSRM flight set 360T033. Section 2.0 contains a summary of RSRM-033 processing. Section 3.0 discusses any significant problems or special issues that require special attention. Sections 4.0 through 6.0 contain narrative descriptions of all key events, including any related processing problems. Appendix A provides engineering specifications and changes. A list and matrix of all problem reports (PR's) pertinent to this flight set is provided in Appendix B. The matrix was provided by the Thiokol LSS Quality Engineering office. Copies of the PR's generated during the processing of RSRM-033 will be provided upon request. Appendix C contains the motor set status matrix, which provides milestone dates for the RSRM-033 flow. Section 7.0 provides recommendations for the improvement of flight hardware processing. Section 8.0 contains data sheets that provide flight hardware parts and consumable information installed during the booster build-up and stacking operations by location, lot/serial number, expiration and cure dates/times, and installation dates.

Hillard, Robert C.↗

Impact Of Standing Water On Saltstone Placement II - Hydraulic Conductivity Data

The amount of water present during placement and subsequent curing of saltstone has the potential to impact several properties important for grout quality. An active drain water system can remove residual standing water and expose the surface of the placed saltstone to air. Oxidation of the saltstone may result in an increase in the leachability of redox sensitive elements. A dry surface can lead to cracking, causing an increase in hydraulic conductivity. An inactive drain water system can allow standing water that generates unnecessary hydrostatic head on the vault walls. Standing water that cannot be removed via the drain system will be available for potential incorporation into subsequent grout placements. The objective of this work is to study the impact of standing water on grout quality pertaining to disposal units. A series of saltstone mixes was prepared and cured at ambient temperature to evaluate the impact of standing water on saltstone placement. The samples were managed to control drying effects on leachability by either exposing or capping the samples. The water to premix ratio was varied to represent a range of processing conditions. Samples were analyzed for density, leachability, and hydraulic conductivity. Report SRNL-STI-2012-00546 was issued detailing the experimental procedure, results, and conclusions related to density and leachability. In the previous report, it was concluded that: density tends to increase toward the bottom of the samples. This effect is pronounced with excess bleed water; drying of the saltstone during curing leads to decreased Leachability Index (more leaching) for potassium, sodium, rhenium, nitrite, and nitrate; there is no noticeable effect on saltstone oxidation/leachability by changing the water to premix ratio (over the range studied), or by pouring into standing water (when tested up to 10 volume percent). The hydraulic conductivity data presented in this report show that samples cured exposed to the atmosphere had about three orders of magnitude higher hydraulic conductivity than any of the other samples. Considering these data, along with the results presented in the previous report, leads to the conclusion that small changes in water to premix ratio and the inclusion of up to 10 volume percent standing water should not be expected to have a detrimental effect on saltstone grout quality. The hydraulic conductivity results further demonstrate that curing in a moist environment is critical to maintaining saltstone quality.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

STS-56, RSRM-031, 360L031 KSC processing configuration and data report

KSC Processing Configuration and Data Report is being provided as a historical document and as an enhancement to future RSRM manufacturing and processing operations. The following sections provide information on segment receipt, aft booster build-up, booster assembly, and closeout for STS-56, RSRM flight set 36OL031. Section 2.0 contains a summary of RSRM-031 processing. Section 3.0 discusses any significant problems or special issues that require special attention. Sections 4.0 through 6.0 contain narrative descriptions of all key events, including any related processing problems. Appendix A provides engineering specifications and changes. A list and matrix of all problem reports (PR's) pertinent to this flight set is provided in Appendix B. The matrix was provided by the Thiokol LSS Quality Engineering office. Copies of the PR's generated during the processing of RSRM-031 will be provided upon request. Appendix C contains the motor set status matrix, which provides milestone dates for the RSRM-031 flow. Section 7.0 provides recommendations, if any, for the improvement of flight hardware processing. Section 8.0 contains data sheets that provide flight hardware parts and consumables information installed during the booster build-up and stacking operations by location, lot/serial number, expiration and cure dates/times, and installation dates.

Source record↗

Identifying Sociomarkers of Pediatric Asthma Patients at Risk of Hospital Revisiting

ObjectiveAsthma is one of the most common chronic childhood diseases in the United States [2, 3]. In addition to its pervasiveness, pediatric asthma shows high sensitivity to the environment. Combining medical-social dataset with machine learning methods we demonstrate how socio-markers play an important role in identifying patients at risk of hospital revisits due to pediatric asthma within a year.IntroductionA socio-marker is a measurable indicator of social conditions where a patient is embedded in and exposed to, being analogous with a biomarker indicating the severity or presence of some disease state. Social factors are one of the most clinical health determinants [1], which play a critical role in explaining health outcomes. Socio-markers can help medical practitioners and researchers to reliably identify high-risk individuals in a timely manner.MethodsWe collected data from three different sources: pediatric asthma encounter records from Jan 1st, 2016 to Dec 31st, 2016 at a children’s hospital, the 2010 U.S census data and neighborhood quality survey data by Memphis Property Hub. After merging these datasets we examine the effect of social features in identifying the patients who visited the hospital more than once during the observation period. We only use the first time visit (3,678 cases) to avoid over-counting of the same patients. In addition to demographic features (age, gender, insurance type, and race (African American and White)), we incorporate the social features such as the proportion of individuals living below the federal poverty level, blight prevalence, neighborhood quality, neighborhood quality inequality, trash dumping presence, the broken window pervasiveness within the zip code area of patients’ residence are included.We then implemented a Support Vector Machine (SVM) based classification model using abovementioned 11 social features. The classification outcome is either patient visits the hospital only one-time (class 0) or revisits the hospital within a year (class 1). Among 3,678 unique patients in the dataset, only 823 pediatric patients revisited hospital with asthma. So, to overcome the class imbalance issue, we have used 823 patients’ data (randomly selected in 1,000 iterations) from each class. Further, to avoid overfitting and ensure generalizability, we divided the dataset as training, test, and validation with a proportion of 60%, 20%, and 20%, respectively. The reported test (5-folds cross-validation using training and testing data) and validation accuracy of the SVM method are averaged over 1,000 iterations to avoid sampling error and bias.ResultsThe proposed socio-marker model resulted in an average classification accuracy of 63.70% for the test set and 63.67 % for the validation set. Further, the average specificity (the total true negative cases divided by the sum of true negative and false positive) and sensitivity (the total number of true positive cases divided by the sum of positive predicted cases) is found to be 62.79% and 64.77%, respectively for the test set and 62.79% and 64.83%, respectively for the validation set. Results of this study suggest that socio-marker features that are not directly related to a patient’s medical conditions can still predict whether the patient will come back to the hospital within a year or not with approximately 64% accuracy.ConclusionsBringing the socio-marker features in the surveillance system may ease the burden of detecting the patients at risk of revisiting the hospital. The results should be interpreted with caution because we only used 12-month period of observation and the visit beyond the observation window is not considered. Also the patients may have visited different hospitals which are not captured in the data.References1. Booske BC, Athens JK, Kindig DA, Park H, Remington PL: Different perspectives for assigning weights to determinants of health. University of Wisconsin: Population Health Institute 2010.2. Subbarao P, Mandhane PJ, Sears MR: Asthma: epidemiology, etiology and risk factors. Canadian Medical Association Journal 2009, 181(9):E181-E190.3. Gold DR, Wright R: Population disparities in asthma. Annu Rev Public Health 2005, 26:89-113.

Shin, Eun Kyong↗