Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cross section data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Fronts and frontogenesis as revealed by high time resolution data

Upper air sounding are used to examine a cold front of average intensity. Vertical cross sections of potential temperature and wind, and horizontal analyses were compared and adjusted for consistency. These analyses were then used to study the evolution of the front, found to consist of a complex system of fronts occurring at all levels of the troposphere. Low level fronts were strongest at the surface and rapidly weakened with height. Fronts in the midddle troposphere were much more intense. The warm air ahead of the fronts was nearly barotropic, while the cold air behind was baroclinic through deep layers. A deep mixed layer was observed to grow in this cold air.

Frank, A. E.↗

Effect of hole geometry and Electric-Discharge Machining (EDM) on airflow rates through small diameter holes in turbine blade material

The effects of two design parameters, electrode diameter and hole angle, and two machine parameters, electrode current and current-on time, on air flow rates through small-diameter (0.257 to 0.462 mm) electric-discharge-machined holes were measured. The holes were machined individually in rows of 14 each through 1.6 mm thick IN-100 strips. The data showed linear increase in air flow rate with increases in electrode cross sectional area and current-on time and little change with changes in hole angle and electrode current. The average flow-rate deviation (from the mean flow rate for a given row) decreased linearly with electrode diameter and increased with hole angle. Burn time and finished hole diameter were also measured.

Hippensteele, S. A.↗

A comparison of the thermal and radar characteristics of Mars

Results of thermal infrared sensing and radar observations of the Martian surface are compared for the region centered on +22 deg latitude. Values of the apparent thermal inertia of the surface were derived from surface brightnesses observed by the Viking Orbiter Infrared Thermal Mapper, while radar cross sections were obtained in earth-based experiments at wavelengths of 3.8, 12.5 and 70 cm. A correlation between the thermal inertia and radar cross section values is observed which is strongest with the 70-cm radar data except between longitudes of 10 and 90 deg, where a slight anticorrelation is found. The mixing of small (much less than 70 cm) rocks into a surface of fine material can account for the data between 90 and 370 deg longitude, with as much as 50% of the surface covered by rock in Syrtis Major, Isidis Planitia and parts of Elysium Planitia, and little or no rock cover near Olympus Mons, Elysium Mons, and Amazonis Planitia. The remaining longitudes may be explained in terms of the effects of atmospheric dust on the surface temperature or the effects of local variations in large-scale roughness or scattering from rocks. Data from the 90 to 370 deg longitude region are consistent with the division of the Martian surface into two types of terrain, possibly related to the erosional or depositional nature of the regions.

Jakosky, B. M.↗

Stratospheric warmings diagnosed using the transformed Eulerian-mean equations and the effect of the mean state on wave propagation

Terms for the transformed Eulerian equations are calculated in order to characterize the phenomenom of sudden stratospheric warming. The transformed diagnostics are applied to data for warmings during Dec. and Jan. 1976-1977, as well as cross sections for the directions of the Eiliassen-Palm (EP) fluxes and residual mean meridional circulations. The convergence of the EP flux was determined to provide a strong approximation to the total effect of waves in forcing the zonal mean flow. The EP fluxes change from an upward and equatorward direction to an upward and poleward direction during the warmings, and indications are reported that the effect is due to a feedback on wave propagation of an evolving mean flow. Ray paths in the meridional plane are computed for different mean wind fields to determine the direction of wave propagation according to linear theory based on the WKB approximation.

Oneill, A.↗

Studies of neutron and proton nuclear activation in low-Earth orbit

The expected induced radioactivity of experimental material in low Earth orbit was studied for characteristics of activating particles such as cosmic rays, high energy Earth albedo neutrons, trapped protons, and secondary protons and neutrons. The activation cross sections for the production of long lived radioisotopes and other existing nuclear data appropriate to the study of these reactions were compiled. Computer codes which are required to calculate the expected activation of orbited materials were developed. The decreased computer code used to predict the activation of trapped protons of materials placed in the expected orbits of LDEF and Spacelab II. Techniques for unfolding the fluxes of activating particles from the measured activation of orbited materials are examined.

Laird, C. E.↗

Remote measurement of in-plane diffusivity components in plates

A method of determining thermal diffusivity in thin plates is presented. The method, using infrared images of evolving thermal patterns previously injected with a laser, is noncontacting, one-sided, and remote. It does not require independent estimates of either the emissivity of the sample or the sample thickness. With a line-segment pattern for thermal input, it yields the inplane components of the diffusivity tensor in anisotropic materials and also the rate of heat loss to the environment of the plate. Two methods of data analysis are presented, one corresponding to a heating line of general cross section and the other considering a Gaussian cross section, thereby saving considerable computer time. Both methods produce a statistical evaluation of measurement quality as well as estimates of diffusivity and loss rate. Results are shown for plates of metals and graphite-epoxy composite materials. Principal components and orientation for the diffusivity tensor are obtained in the anisotropic graphite-epoxy sample.

Welch, Christopher S.↗

Approximate penetration factors for nuclear reactions of astrophysical interest

The ranges of validity of approximations of P(l), the penetration factor which appears in the parameterization of nuclear-reaction cross sections at low energies and is employed in the extrapolation of laboratory data to even lower energies of astrophysical interest, are investigated analytically. Consideration is given to the WKB approximation, P(l) at the energy of the total barrier, approximations derived from the asymptotic expansion of G(l) for large eta, approximations for small values of the parameter x, applications of P(l) to nuclear reactions, and the dependence of P(l) on channel radius. Numerical results are presented in tables and graphs, and parameter ranges where the danger of serious errors is high are identified.

Humblet, J.↗

The design and preliminary calibration of a boundary-layer flow channel

Design procedures for a new low-speed boundary-layer research channel are described. The channel is an open-circuit wind tunnel for the study of two-dimensional boundary layers under controlled pressure gradients, and follows design guidelines from published literature on blower tunnels with wide-angle diffusers. The contraction was arranged in a modular fashion permitting two different test sections of square and high-aspect-ratio cross section. A radical type of wide-angle diffuser was employed, and a stream-tube computer code (GE Streamtube Curvature Code) was used to check the contraction designs. The alternate test sections have the following specifications: 2- by 2-foot cross section with a fixed velocity of 23 ft/sec, and a boundary-layer section with a 0.5- by 2-foot cross section at a fixed velocity of approximately 89 ft/sec. Experimental techniques and data are described for the evaluation of diffuser effectiveness, boundary-layer channel characteristics, and overall performance of the facility.

Rao, Dhanvada M.↗

Robotic Vision Would Combine Optics And Microwaves

Conceptual robot-vision system processes data from both microwave and visible-wavelength sensors. Concept, called "fusion of sensors," yields better information on shapes of some objects than obtained from one type of sensor alone. Proposed system fuses data from television images with polarized low-resolution radar-scattering cross sections. Using iterative procedure, generates successive approximations to shape of target by minimizing differences between observed radar returns and radar returns observed if object characterized by computed scattering transfer matrix.

Krishen, Kuma↗

Extensive middle atmosphere (20-120 KM) modification in the Global Reference Atmospheric Model (GRAM-90)

The Global Reference Atmospheric Model (GRAM) is currently available in the 'GRAM-88' version (Justus, et al., 1986; 1988), which includes relatively minor upgrades and changes from the 'MOD-3' version (Justus, et al., 1980). Currently a project is underway to use large amounts of data, mostly collected under the Middle Atmosphere Program (MAP) to produce a major upgrade of the program planned for release as the GRAM-90 version. The new data and program revisions will particularly affect the 25-90 km height range. Sources of data and preliminary results are described here in the form of cross-sectional plots.

Justus, C. G.↗

Polarimetric radar measurements of a forested area near Mt. Shasta

The authors present the results of an experiment using the NASA/JPL DC-8 AIRSAR (aircraft synthetic-aperture radar) over a coniferous forest near Mt. Shasta (California) in 1989. Calibration devices were deployed in clearings and under the forest canopy and passes at 20, 40, and 55 deg incidence angles were made with the AIRSAR. A total of eight images at differing incidence angles have been processed and calibrated. The multipolarization, multifrequency data were examined, and it was found that the C-band cross section averaged over like and cross polarizations is the best parameter for distinguishing between two stands with differing forest biomass. The average cross section at P- and L-bands is useful only for smaller incidence angles. Parameters describing the polarization behavior of the scattering were primarily useful in identifying the dominant scattering mechanisms for forest backscatter. It was found that both branch scattering and ground/tree interactions are important at P-band. At L-band and C-bands, the return is primarily from the canopy. Comparison with model calculations verified this conclusion.

Durden, Stephen L.↗

Multifrequency observations

Analyses of synthetic aperture radar (SAR) image data were performed at DLR to classify various kinds of vegetation and different terrain types. The data were collected both with the DLR experimental synthetic aperture radar (E-SAR) in X-band, C-band, and L-band and with the NASA/JPL DC-8 SAR in C-band, L-band, and P-band. E-SAR is a single frequency and single polarization system (both parameters can be selected) but several flights were used to collect multifrequency/multipolarization data which were geometrically matched after processing. Classification of different crop types was based on comparison of the backscatter coefficients of calibrated SAR data in different frequency bands and polarizations. The DC-8 STAR collects polarimetric data in different bands simultaneously. Data acquired with the NASA/JPL DC-8 STAR are qualified for scientific investigations by reducing the cross-talk and channel imbalance to a tolerable extent. The data are absolutely calibrated by using reference targets with known backscattering cross-sections. The signatures and polarimetric features of terrain types, such as grassland, concrete, sea, forest (coniferous; deciduous) and urban areas, are extracted and discussed with respect to frequency and incidence angle dependence. A multifrequency polarimetric feature vector was applied for classification. The results of this new approach for separating and classifying different object classes are presented.

Glitz, R.↗

Visible and Infrared Radiative Relationships as Measured by Satellite and Lidar

The impact of cirrus clouds on the heat balance of the Earth is dependent on their reflectivity of solar radiation and their absorptivity of terrestrial radiation. Any prediction of cloud cover changes that accompany climate change will have to know whether the visible/IR radiative characteristics of the clouds will also change. Few measurements of cirrus clouds have been made where both visible and IR data were collected simultaneously. To obtain the visible optical depths of cirrus clouds, the High Spectral Resolution Lidar (HSRL) and the Volume Imaging Lidar (VIL) were used. The VIL produced visible backscatter images of the clouds by scanning across the wind. Time advection was used to construct a horizontal image of visible backscatter from the VIL data. The HSRL was used to calibrate the VIL signal into backscatter cross sections of particulates.

Wylie, Donald↗

Catalogue of X-Ray Texture Data for Al-Cu-Li Alloy 1460, 2090, 2096 and 2195 Near-Net-Shape Extrusions, Sheet and Plate

The effect of crystallographic texture on the mechanical properties of near-net-shape extrusions is of major interest ff these products are to find application in launch vehicle or aircraft structures. The objective of this research was to produce a catalogue containing quantitative texture information for extruded product, sheet and plate. The material characterized was extracted from wide, integrally stiffened panels fabricated from the Al-Cu-Li alloys 1460, 2090, 2096 and 2195. The textural characteristics of sheet and plate products of the same alloys were determined for comparison purposes. The approach involved using X-ray diffraction to generate pole figures in combination with orientation distribution function analysis. The data were compiled as a function of location in the extruded cross-sections and the variation in the major deformation- and recrystallization-related texture components was identified.

Hales, Stephen J.↗

Molecular Line and Continuum Opacities for Modeling of Extrasolar Giant Planet and Cool Stellar Atmospheres

The molecular line and continuum opacities are investigated in the atmospheres of cool stars and Extrasolar Giant Planets (EGPs). Using a combination of ab inito and experimentally derived potential curves and dipole transition moments, accurate data have been calculated for rovibrationally-resolved oscillator strengths and photodissociation cross sections in the B' (sup 2)Sigma+ (left arrow) X (sup 2)Sigma+ and A (sup 2)Pi (left arrow) X (sup 2)Sigma+ band systems in MgH. We also report our progress on the study of the electronic structure of LiCl and FeH.

Weck, P. F.↗

Cloud Coverage and Height Distribution from the GLAS Polar Orbiting Lidar: Comparison to Passive Cloud Retrievals

The Geoscience Laser Altimeter System (GLAS) began full on orbit operations in September 2003. A main application of the two-wavelength GLAS lidar is highly accurate detection and profiling of global cloud cover. Initial analysis indicates that cloud and aerosol layers are consistently detected on a global basis to cross-sections down to 10(exp -6) per meter. Images of the lidar data dramatically and accurately show the vertical structure of cloud and aerosol to the limit of signal attenuation. The GLAS lidar has made the most accurate measurement of global cloud coverage and height to date. In addition to the calibrated lidar signal, GLAS data products include multi level boundaries and optical depth of all transmissive layers. Processing includes a multi-variable separation of cloud and aerosol layers. An initial application of the data results is to compare monthly cloud means from several months of GLAS observations in 2003 to existing cloud climatologies from other satellite measurement. In some cases direct comparison to passive cloud retrievals is possible. A limitation of the lidar measurements is nadir only sampling. However monthly means exhibit reasonably good global statistics and coverage results, at other than polar regions, compare well with other measurements but show significant differences in height distribution. For polar regions where passive cloud retrievals are problematic and where orbit track density is greatest, the GLAS results are particularly an advance in cloud cover information. Direct comparison to MODIS retrievals show a better than 90% agreement in cloud detection for daytime, but less than 60% at night. Height retrievals are in much less agreement. GLAS is a part of the NASA EOS project and data products are thus openly available to the science community (see http://glo.gsfc.nasa.gov).

Spinhime, J. D.↗

An Experimental Investigation of the Flow of Air in a Flat Broadening Channel

The wide use of diffusers, in various fields of technology, has resulted in several experimental projects to study the action and design of diffusers. Most of the projects dealt with steam (steam turbine nozzles). But diffusers have other applications - that is, ventilators, smoke ducts, air coolers, refrigeration, drying, and so forth. At present there is another application for diffusers in wind-tunnel design. Because of higher requirements and increased power of such installations more attention must be paid to the correctness of work and the decrease in losses due to every section of the tunnel. A diffuser, being one of the component parts of a tunnel , can in the event of faulty construction introduce considerable losses. Therefore, in the design of the new CAHI wind tunnel, it was suggested that an experimental study of diffusers be made, with a view to applying the results to wind tunnels. The experiments conducted by K. K. Baulin in the laboratories of CAHI upon models of diffusers of different cross sections, lengths, and angles of divergence, were a valuable source of experimental data. They were of no help, however, in reaching any conclusion regarding the optimum shape because of the complexity and diversity of the factors which all appeared simultaneously, thereby precluding the.study of the effects of any one factor separately. On the suggestion of the director of the CAHI,Prof. B. N. Ureff, it was decided to experiment on a two-dimensional diffuser model and determine the effect, of the angle of divergence. The author is acquainted with two experimental projects of like nature: the first was conducted with water, the other with air. The first of these works, although containing a wealth of experimental data, does not indicate the nature of flow or its relation to the angle of divergence. The second work is limited to four angles - that is, 12 deg, 24 deg, 45 deg, 90 deg. The study of this diffuser did not supply any information about the effect of smaller angles which, because of their advantages, are more commonly used, The author was able to acquaint himself with the second work only after the experiments were started. For these reasons, as well as because on the basis of those works no conclusion can be reached regarding the nature of flow distribution, of eddies, and so forth, experimental work was continued. The need for determining flow patterns follows from the fact that from them are determined methods of measurement - that is, the determination of velocities by means of the pitot tube, which, as is well known, gives correct indications only when placed with its axis parallel to the axis of flow. The data contained in this report were obtained from experiments conducted by the Aerodynamical Laboratories of the CAHI. The solutions to some. of the mathematical problems connected with the experiments are due to Prof. S. A, Chapligin.

Vedernikoff, A. N.↗

NASA Laboratory Astrophysics Workshop 2006 Introductory Remarks

NASA Laboratory Astrophysics Workshop 2006, is the fourth in a series of workshops held at four year intervals, to assess the laboratory needs of NASA's astrophysics missions - past, current and future. Investigators who need laboratory data to interpret their observations from space missions, theorists and modelers, experimentalists who produce the data, and scientists who compile databases have an opportunity to exchange ideas and understand each other's needs and limitations. The multi-wavelength character of these workshops allows cross-fertilization of ideas, raises awareness in the scientific community of the rapid advances in other fields, and the challenges it faces in prioritizing its laboratory needs in a tight budget environment. Currently, we are in the golden age of Space Astronomy, with three of NASA s Great Observatories, Hubble Space Telescope (HST), Chandra X-Ray Observatory (CXO), and Spitzer Space Telescope (SST), in operation and providing astronomers and opportunity to perform synergistic observations. In addition, the Far Ultraviolet Spectroscopic Explorer (FUSE), XMM-Newton, HETE-2, Galaxy Evolution Explorer (GALEX), INTEGRAL and Wilkinson Microwave Anisotropy Probe (WMAP), are operating in an extended phase, while Swift and Suzaku are in their prime phase of operations. The wealth of data from these missions is stretching the Laboratory Astrophysics program to its limits. Missions in the future, which also need such data include the James Webb Space Telescope (JWST), Space Interferometry Mission (SIM), Constellation-X (Con-X), Herschel, and Planck. The interpretation of spectroscopic data from these missions requires knowledge of atomic and molecular parameters such as transition probabilities, f-values, oscillator strengths, excitation cross sections, collision strengths, which have either to be measured in the laboratory by simulating space plasma and interactions therein, or by theoretical calculations and modeling. Once the laboratory data are obtained, a key step to making them available to the observer is the creation and maintenance of critically compiled databases. Other areas of study, that are important for understanding planet formation, and for detection of molecules that are indicators of life, are also supported by the Laboratory Astrophysics program. Some examples are: studies of ices and dust grains in a space environment; nature and evolution of interstellar carbon-rich dust; and polycyclic aromatic hydrocarbons. In addition, the program provides an opportunity for the investigation of novel ideas, such as simulating radiative shock instabilities in plasmas, in order to understand jets observed in space. A snapshot of the currently funded program, mission needs, and relevance of laboratory data to interpreting observations, will be obtained at this workshop through invited and contributed talks and poster papers. These will form the basis for discussions in splinter groups. The Science Organization Committee will integrate the results of the discussions into a coherent White Paper, which will provide guidance to NASA in structuring the Laboratory Astrophysics program in subsequent years, and also to the scientific community in submitting research proposals to NASA for funding.

Hasan, Hashima↗