Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “contractors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Mishaps with oxygen in NASA operations.

Oxygen safety programs were conducted, taking into consideration a review of the hazards, the available data concerning the failure of components and systems, and the oxygen handling procedures followed by NASA and its contractors. Information is presented regarding a substantial number of oxygen mishaps together with safety regulations aimed at reducing the accident probability. The information was used to establish categories of events causing the mishap. These categories include materials incompatibility deficiency, materials failure, design deficiency, cleaning deficiency, and procedural deficiencies. Mishaps are generally caused by a number of interacting factors.

Ordin, P. M.↗
NASA NTRS1972

Shuttle status report.

The Space Shuttle Program is still in Phase B, a phase consisting predominantly of paper analyses and trade studies leading to the selection of a single design. A brief history of the program up to Phase B is discussed together with the results of the original year-long Phase B effort, and the objectives of the Phase B extension currently in work. A Lockheed study is discussed together with a Grumman/Boeing study, Phase B contractor results, displays and controls, simulations, and the flight test.

Swigert, J. L., Jr.↗
NASA NTRS1972

NASA technology utilization survey on composite materials

NASA and NASA-funded contractor contributions to the field of composite materials are surveyed. Existing and potential non-aerospace applications of the newer composite materials are emphasized. Economic factors for selection of a composite for a particular application are weight savings, performance (high strength, high elastic modulus, low coefficient of expansion, heat resistance, corrosion resistance,), longer service life, and reduced maintenance. Applications for composites in agriculture, chemical and petrochemical industries, construction, consumer goods, machinery, power generation and distribution, transportation, biomedicine, and safety are presented. With the continuing trend toward further cost reductions, composites warrant consideration in a wide range of non-aerospace applications. Composite materials discussed include filamentary reinforced materials, laminates, multiphase alloys, solid multiphase lubricants, and multiphase ceramics. New processes developed to aid in fabrication of composites are given.

Leeds, M. A.↗
NASA NTRS1973

Propulsion system for research VTOL transports

In anticipation of an eventual VTOL requirement for civil aviation, NASA has been conducting studies directed toward determining and developing the technology required for a commercial VTOL transport. In this paper, the commercial transport configurations are briefly reviewed; the propulsion system specifications and components developed by the engine study contractor are presented and described; and methods for using the lift-propulsion system for aircraft attitude control are discussed.

Gertsma, L. W.↗
NASA NTRS1973

Analysis of integral lift-fan engine dynamics

An integral lift-fan engine being considered for VTOL applications was simulated using the hybrid computer. A contractor-proposed fuel control and a simple model of the roll dynamics of a hovering VTOL airplane were used in the simulation. Both steady-state and transient data were generated. The desired engine time constant of 0.20 second was achieved for thrust increments less than 10 precent of the design thrust. For roll angle demands less than 10 deg, roll angle overshoot was acceptable with more than 84 percent of the demand achieved in 1 second.

Szuch, J. R.↗
NASA NTRS1972

Plating methods, a survey

Results are presented of a comprehensive search of the literature available, much of which has been generated by the research centers of NASA and its contractors, on plating and coating methods and techniques. Methods covered included: (1) electroplating from aqueous solutions; (2) electroplating from nonaqueous solutions; (3) electroplating from fused-salt baths; (4) electroforming; (5) electroless plating, immersion plating, and mirroring; (6) electroplating from gaseous plasmas; and (7) anodized films and conversion coatings.

Berkowitz, J. B.↗
NASA NTRS1973

Application of EVA guidelines and design criteria. Volume 2: EVA workstation conceptual designs

Several EV workstation concepts were developed and are documented. The workstation concepts were developed following a comprehensive analysis of potential EV missions, functions, and tasks as interpreted from NASA and contractor space shuttle and space station studies, mission models, and related reports. The design of a versatile, portable EVA workstation is aimed at reducing the design and development costs for each mission and aiding in the development of on-orbit serviceable payloads.

Brown, N. E.↗
NASA NTRS1972

Manufacturing and quality control of FCC harnesses

The Saturn 5 program contractors encountered many technological challenges and problems relative to inter-connecting wiring and cabling during the development stages of the Saturn program. The knowledge gained from solving these problems, plus recently developed state-of-the-art techniques, materials, and processes were documented in a report prepared for NASA/MSFC. The portions of that report which deal with FCC harnesses are presented.

Malohm, W. L.↗
NASA NTRS1973

Image dissector development

A second-generation electrostatically focused image dissector tube for use in spacecraft attitude control star trackers is being developed with the support of an industrial contractor. Significant improvements are being made in functional characteristics, as well as in package dimensional control, tolerance of a wide variety of environmental conditions, and expected reliability over long operational lifetimes.

Goss, W. C.↗
NASA NTRS1973

Apollo experience report: Guidance and control systems. Engineering simulation program

The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

Gilbert, D. W.↗
NASA NTRS1973

Technology transfer to a developing nation, Korea

An experimental project is reported which was undertaken. to determine if selected types of technology developed for the aerospace program during the past decade are relevant to specific industrial problems of a developing nation and to test whether a structured program could facilitate the transfer of relevant technologies. The Korea Institute of Science and Technology and the IIT Research Institute were selected as the active transfer agents to participate in the program. The pilot project was based upon the approach to the transfer of domestic technology developed by the NASA Technology Utilization Division and utilized the extensive data and technical resources available through the Space Agency and its contractors. This pilot project has helped to clarify some aspects of the international technology transfer process and to upgrade Korean technological capabilities.

Stone, C. A.↗
NASA NTRS1973

Environment sanitation handbook

The environmental Sanitation handbook provides guidance in the implementation of the basic provisions of occupational medicine and environmental health programs to environmental sanitation. It presents methods and procedures useful for the control of those sanitation factors which could create discomfort and illness in man or do harm to his environment. The provisions of this handbook are applicable to all organizational elements of the Kennedy Space Center (KSC),NASA, and to its associated contractors located at KSC in accordance with the terms of their respective contracts.

Source record↗
NASA NTRS1972

Graphite epoxy reflector support truss for applications technology satellite /ATS/.

The design, development, fabrication, and qualification load testing of the reflector support truss for Applications Technology Satellites F and G are described. Because the truss is stability-critical, high modulus graphite epoxy composite was used to provide a minimum weight structure. The work was performed under the sponsorship of the NASA Goddard Space Flight Center with Fairchild Industries as the prime contractor.

Randolph, R. E.↗
NASA NTRS1973

Status report on shuttle program.

Following a brief summary of previous work, major attention is given to Phase-B extension, the Request for Proposal (RFP), the selected configuration and associated activities, and the future. NASA extended Phase-B contracts to examine other options that might lower peak annual funding and decrease program risk. Most of the discussion deals with the shuttle and orbiter systems. The efforts of the shuttle program in the past year have seen the completion of numerous trade studies and the selection of a prime shuttle contractor.

Swigert, J. L., Jr.↗
NASA NTRS1973

Propulsion system for research VTOL transports.

In anticipation of an eventual VTOL requirement for civil aviation, NASA has been conducting studies directed toward determining and developing the technology required for a commercial VTOL transport. The commercial transport configurations of such a VTOL transport are briefly reviewed, the propulsion system specifications and components developed by the engine study contractor are presented and described, and methods for using the lift-propulsion system for aircraft attitude control are discussed.

Gertsma, L. W.↗
NASA NTRS1973

Design, capability, and cost of a Versatile Upper Stage /VUS/ family of vehicles.

Trade-off studies and a preliminary design were accomplished to investigate the Versatile Upper Stage (VUS) concept. This concept entails the development by one contractor of a family of stages with a great deal of commonality to perform a spectrum of potential unmanned automated missions planned through 1990. The trade studies and analyses revealed areas where the penalty for commonality between stages was excessive in weight and performance loss. This occurred in the selection of the vehicle structural shell. In many of the expensive subsystems, especially astrionics, it was found that establishing the requirements for all family members and the application of commonality in subsystem selection could result in significant savings.

Haltermann, R. L.↗
NASA NTRS1973

Representative Space Shuttle missions and their impact on shuttle design.

Four representative Space Shuttle missions for the 1980's are described: mission 1, a third stage deployment and retrieval mission; mission 2, a combination orbiting element revisit and sortie mission; mission 3, a rapid payload retrieval and return mission; and mission 4, a 30-day earth observation sortie mission. The first three missions are proposed baseline reference missions, and, as such, their mission requirements must be met by the baseline shuttle configuration developed by NASA contractors. Typically, these missions impact the design in terms of such basics as shuttle launch payload capability, payload bay size, performance of the orbital maneuvering system (OMS) and the reaction control system (RCS), the basic 7-day orbital system lifetime, and the thermal protection system for high cross-range entry. To illustrate that vehicle design may be subject to requirements from other mission types as well, mission 4 is included. Each description stresses mission requirements having unique impact on vehicle design.

Young, K. A.↗