Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “condensed matter & materials physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Topological quantum switch and controllable one-dimensional conducting paths in antimonene facilitated by breaking the inversion symmetry

Based on the nontrivial topology of buckled antimonene, we propose two conceptual device designs based on breaking the inversion symmetry which can be achieved by gating. The first one is a quantized topological switch obtained by breaking the degeneracy of the fractionalized charge conducting edge states, inducing a metal-insulator transition. In the second one, using local gating with different polarity in different areas, a domain wall is created at their interface, which hosts a soliton type electronic gap state in which transport could be accessed by doping and shown to be robust over a wide range of disorder.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Field-induced topological Hall effect and double-fan spin structure with a $c$-axis component in the metallic kagome antiferromagnetic compound YMn 6 Sn 6

Geometric frustration in the kagome lattice makes it a great host for the flat electronic band, nontrivial topological properties, and novel magnetism. In this work, we use magnetotransport measurements to map out the field-temperature phase diagram of the centrosymmetric YMn 6 Sn 6 with a Mn kagome lattice and show that the system exhibits the topological Hall effect (THE) with an in-plane applied magnetic field around 240 K. In addition, our neutron diffraction results demonstrate that the observed THE cannot arise from a magnetic skyrmion lattice, but instead from an in-plane field-induced double-fan spin structure with c-axis components. This paper provides a platform to understand the influence of a field-induced novel magnetic structure on magnetoelectric response in topological kagome metals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-field spin-flop state in green dioptase

The high-field magnetic properties and magnetic order of the gem mineral green dioptase Cu 6 [Si 6 O 18 ] .6 H 2 O have been studied by means of single-crystal neutron diffraction in magnetic fields up to 21 T and magnetization measurements up to 30 T. In zero field, the Cu 2+ moments in the antiferromagnetic chains are oriented along the c axis with a small off-axis tilt. For a field applied parallel to the c axis, the magnetization shows a spin-flop-like transition at B*=12.2 T at 1.5 K. Neutron diffraction experiments show a smooth behavior in the intensities of the magnetic reflections without any change in the periodicity of the magnetic structure. Bulk and microscopic observations are well described by a model of ferromagnetically coupled antiferromagnetic X X Z spin-$\frac{1}{2}$ chains, taking into account a change of the local easy-axis direction. We demonstrate that the magnetic structure evolves smoothly from a deformed Néel state at low fields to a deformed spin-flop state in a high field via a strong crossover around B*. The results are generalized for different values of interchain coupling and spin anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of surface steps on chemical ordering in the subsurface of Cu(Au) solid solutions

Atomic steps are typically assumed to only influence surface phenomena of solids. In contrast, in this paper we show, using in-situ atomic-resolution electron microscopy observations and atomistic modeling, the pronounced effect from surface stepsin inducing compositional and structural evolution in the subsurface of a Cu(Au) solid solution. We find that Au surface segregation results in a stacked sequence of Cu-Au ordered phases in the subsurface. The presence of a monatomic step at the surface induces the formation of an anti-phase boundary that extends from the surface step to deeper layers by maintaining the same composition profile associated with each terrace. The bunching of surface steps induces chemical disordering of the Cu-Au ordered phases in the subsurface region of the bunched steps. These results demonstrate the instant propagation of surface dynamics of atomic steps into the subsurface region and can find broader applicability in utilizing surface defects to tune the composition and structure in the subsurface of alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Origin of the magnetic and orbital ordering in α-Sr 2 CrO 4

Motivated by recent experimental progress in transition metal oxides with the K 2 NiF 4 structure, in this study we investigate the magnetic and orbital ordering in α-Sr 2 CrO 4 . Using first principles calculations, first we derive a three-orbital Hubbard model, which reproduces the ab initio band structure near the Fermi level. The unique reverse splitting of t 2g orbitals in α-Sr 2 CrO 4 , with the 3d 2 electronic configuration for the Cr 4+ oxidation state, opens up the possibility of orbital ordering in this material. Using real-space Hartree-Fock for multi-orbital systems, we constructed the ground state phase diagram for the two dimensional compound α-Sr 2 CrO 4 . We found stable ferromagnetic, antiferromagnetic, antiferro-orbital, and staggered orbital stripe ordering in robust regions of the phase diagram. Furthermore, using the density matrix renormalization group method for two-leg ladders with the realistic hopping parameters of α-Sr 2 CrO 4 , we explore magnetic and orbital ordering for experimentally relevant interaction parameters. Again, we find a clear signature of antiferromagnetic spin ordering along with antiferro-orbital ordering at moderate to large Hubbard interaction strength. We also explore the orbital-resolved density of states with Lanczos, predicting insulating behavior for the compound α-Sr 2 CrO 4 , in agreement with experiments. Finally, an intuitive understanding of the results is provided based on a hierarchy between orbitals, with d xy driving the spin order, while electronic repulsion and the effective one dimensionality of the movement within the d xz and d yz orbitals driving the orbital order.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Avoided ferromagnetic quantum critical point in pressurized La 5 Co 2 Ge 3

We present the pressure-temperature phase diagram La 5 Co 2 Ge 3 up to ~ 5 GPa, which was constructed from magnetization, resistivity, and specific heat measurements. At ambient pressure, La 5 Co 2 Ge 3 is an itinerant ferromagnet with a Curie temperature T C ~ 4 K. Upon increasing pressure up to ~ 1.7 GPa, T C is suppressed down to ~ 3 K. Upon further increasing pressure, our results suggest that La 5 Co 2 Ge 3 enters a different low-temperature ground state. The corresponding transition temperature T* has a nonmonotonic pressure dependence up to ~ 5 GPa. Our results demonstrate that the ferromagnetic quantum critical point in La 5 Co 2 Ge 3 is avoided by the appearance of a different, likely magnetically ordered, state that has an antiferromagnetic component.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Temperature dependence of London penetration depth anisotropy in superconductors with anisotropic order parameters

Here, we study the effects of anisotropic order parameters on the temperature dependence of London penetration depth anisotropy γ λ ( T ) . After MgB 2 , this dependence is commonly attributed to distinct gaps on multiband Fermi surfaces in superconductors. We have found, however, that the anisotropy parameter may depend on temperature also in one-band materials with anisotropic order parameters Δ ( T , k F ) ; a few such examples are given. We have also found that for different order parameters, the temperature dependence of Δ ( T ) / Δ ( 0 ) can be represented with good accuracy by the interpolation suggested by Einzel, which simplifies considerably the evaluation of γ λ ( T ) . Of particular interest are mixed order parameters of two symmetries for which γ λ ( T ) may go through a maximum for a certain relative weight of two phases. Also, for this case we find that the ratio Δ max ( 0 ) / T c may exceed substantially the weak-coupling limit of 1.76. It, however, does not imply strong coupling; rather, it is due to significantly anisotropic angular variation of Δ .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Robust long-range magnetic correlation across antiphase domain boundaries in Sr 2 CrReO 6

Here, we report a resonant elastic x-ray scattering study of a thin-film sample of Sr 2 CrReO 6 , which has one of the highest ferrimagnetic transition temperatures among ordered double perovskites.We found resonantly enhanced magnetic Bragg peaks at Q = (odd, odd, odd) at both the rhenium L 2 and L 3 edges, which coincide with the structural Bragg peaks of Sr 2 CrReO 6 . By analyzing the widths of these Bragg peaks, we extracted very different structural and magnetic correlation lengths. The former is about 15 nm, while the latter is constrained by the instrumental resolution to be at least 90 nm. We argue that a finite structural correlation length is consistent with the existence of antiphase nanodomains in our sample. On the other hand, a much larger magnetic correlation length indicates that the magnetic correlation extends far beyond the boundaries of individual domains and is consistent with strong antiferromagnetic coupling between different antiphase domains. Last, from the azimuthal dependence of the magnetic intensity, we show that the magnetic moments lie perpendicular to the c axis, which explains the earlier bulk magnetization data.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quasi-one-dimensional magnetism in the spin-12 antiferromagnet BaNa 2 Cu(VO 4 ) 2

Here, we report synthesis and magnetic properties of quasi-one-dimensional spin- 1 2 Heisenberg antiferromagnetic chain compound BaNa 2 Cu ( VO 4 ) 2 . This orthovanadate has a centrosymmetric crystal structure, C 2 / c , where the magnetic Cu 2 + ions form spin chains. These chains are arranged in layers, with the chain direction changing by 62 ° between the two successive layers. Alternatively, the spin lattice can be viewed as anisotropic triangular layers upon taking the interchain interactions into consideration. Despite this potential structural complexity, temperature-dependent magnetic susceptibility, heat capacity, electron spin resonance intensity, and nuclear magnetic resonance (NMR) shift agree well with the uniform spin- 1 / 2 Heisenberg chain model with an intrachain coupling of J / k B ≃ 5.6 K. The saturation field obtained from the magnetic isotherm measurement consistently reproduces the value of J / k B . Further, the V 51 NMR spin-lattice relaxation rate mimics the one-dimensional character in the intermediate temperature range, whereas magnetic long-range order sets in below T N ≃ 0.25 K. The effective interchain coupling is estimated to be J ⊥ / k B ≃ 0.1 K. The theoretical estimation of exchange couplings using band-structure calculations reciprocate our experimental findings and unambiguously establish the one-dimensional character of the compound. Finally, the spin lattice of BaNa 2 Cu ( VO 4 ) 2 is compared with the chemically similar but not isostructural compound BaAg 2 Cu ( VO 4 ) 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Expansive open Fermi arcs and connectivity changes induced by infrared phonons in ZrTe 5

Expansive open Fermi arcs covering most of the surface Brillouin zone (SBZ) are desirable for detection and control of many topological phenomena, but they have generally been reported for Kramers-Weyl points, or unconventional chiral fermions, pinned at time-reversal invariant momentum in chiral materials. Here using first-principles band structure calculations, we show that for conventional Weyl points in ZrTe 5 with the chirality of +1/–1 near the BZ center at general momentum induced by one of the infrared phonons—the second lowest $B_{1u}$ mode for breaking inversion symmetry—they can also form expansive open Fermi arcs across the SBZ boundary to occupy most of the SBZ when projected on the (001) surface. In this work, we reveal that such expansive open Fermi arcs are evolved from the topological surface states that connect multiple surface Dirac points on the (001) surface of the topological insulator phases without lattice distortion in ZrTe 5 . Furthermore, we find that the connectivity of the induced open Fermi arcs can be changed by the magnitude of the lattice distortion of this infrared phonon mode. Thus, we propose that using coherent optical phonons to modulate lattice parameters can offer ways to induce unique topological features including expansive open Fermi arcs and to dynamically control Fermi arc connectivity in ZrTe 5 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Topological obstructed atomic limit insulators by annihilating Dirac fermions

We show that annihilating a pair of Dirac fermions implies a topological transition from the critical semimetallic phase to an obstructed atomic limit insulator phase instead of a trivial insulator. This is shown to happen because of branch cuts in the phase of the wave functions, leading to nontrivial Zak phase along certain directions. To this end, we study their ${\mathbb{Z}}_{2}$ invariant and also study the phase transition using entanglement entropy. We use low-energy Hamiltonians and numerical result from model systems to show this effect. These transitions are observed in realistic materials, including strained graphene and buckled honeycomb group V (Sb/As).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Manipulation of electronic property of epitaxial graphene on SiC substrate by Pb intercalation

Manipulating the electronic properties of graphene has been a subject of great interest since it can aid material design to extend the applications of graphene to many different areas. Here, we systematically investigate the effect of lead (Pb) intercalation on the structural and electronic properties of epitaxial graphene on the SiC(0001) substrate. We show that the band structure of Pb-intercalated few-layer graphene can be effectively tuned through changing intercalation conditions, such as coverage, location of Pb, and the initial number of graphene layers. Lead intercalation at the interface between the buffer layer (BL) and the SiC substrate decouples the BL from the substrate and transforms the BL into a p-doped graphene layer. We also show that Pb atoms tend to donate electrons to neighboring layers, leading to an n-doping graphene layer and a small gap in the Dirac cone under a sufficiently high Pb coverage. This paper provides useful guidance for manipulating the electronic properties of graphene layers on the SiC substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Valley filtering in strain-induced α-$\mathcal{T}_3$ quantum dots

We test the valley filtering capabilities of a quantum dot inscribed by locally straining an α-$\mathcal{T}_3$ lattice. Specifically, we consider an out-of-plane Gaussian bump in the center of a four-terminal configuration and calculate the generated pseudo-magnetic field having opposite direction for electrons originating from different valleys, the resulting valley-polarized currents, and the conductance between the injector and collector situated opposite one another. Depending on the quantum dot’s width and width-to-height ratio, we detect different transport regimes with and without valley filtering for both the α-$\mathcal{T}_3$ and Dice lattice structures. In addition, we analyze the essence of the conductance resonances with high valley polarization in terms of related (pseudo) Landau levels, the spatial distribution of the local density of states and the local current densities. The observed local charge and current density patterns reflect the local inversion symmetry-breaking by the strain, besides the global inversion symmetry breaking due to the scaling parameter α. By this way we can also filter out different sublattices

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anisotropic superconductivity in the spin-vortex antiferromagnetic superconductor CaK(Fe 0.95 Ni 0.05 ) 4 As 4

High critical temperature superconductivity often occurs in systems where an antiferromagnetic order is brought near T = 0 K by slightly modifying pressure or doping. CaKFe 4 As 4 is a superconducting, stoichiometric iron-pnictide compound showing optimal superconducting critical temperature with T c as large as 35 K. Doping with Ni induces a decrease in T c and the onset of spin-vortex crystal (SVC) antiferromagnetic order, which consists of spins pointing inwards to or outwards from alternating As sites on the diagonals of the in-plane square Fe lattice. In this work we study the band structure of CaK(Fe 0.95 Ni 0.05 ) 4 As 4 (T c = 10 K, T SVC = 50 K) using quasiparticle interference with a scanning tunneling microscope and show how the SVC modifies the band structure and induces a fourfold superconducting gap anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fingerprinting triangular-lattice antiferromagnet by excitation gaps

CeCd 3 As 3 is a rare-earth triangular-lattice antiferromagnet with large inter-layer separation. Here, our field-dependent heat capacity measurements at dilution fridge temperatures allow us to trace the field-evolution of the spin-excitation gaps throughout the antiferromagnetic and paramagnetic regions. The distinct gap evolution places strong constraints on the microscopic pseudo-spin model, which, in return, yields a close quantitative description of the gap behavior. This analysis provides crucial insights into the nature of the magnetic state of CeCd 3 As 3 , with a certainty regarding its stripe order and low-energy model parameters that sets a compelling paradigm for exploring and understanding the rapidly growing family of the rare-earth-based triangular-lattice systems

36 MATERIALS SCIENCE↗
DOE OSTI2021

Local observation of linear-T superfluid density and anomalous vortex dynamics in URu2Si2

The heavy fermion superconductor URu2Si2 is a candidate for chiral, time-reversal symmetry-breaking superconductivity with a nodal gap structure. Here, we microscopically visualized superconductivity and spatially inhomogeneous ferromagnetism in URu2Si2. We observed linear-T superfluid density, consistent with d-wave pairing symmetries including chiral d wave, but did not observe the spontaneous magnetization expected for chiral d wave. Local vortex pinning potentials had either four- or twofold rotational symmetries with various orientations at different locations. Taken together, these data support a nodal gap structure in URu2Si2 and suggest that chirality either is not present or does not lead to detectable spontaneous magnetization.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic anisotropy in uranium monosulfide probed by magnetic torque measurements

We have studied the magnetic torque in uranium monosulfide (US) single crystals to explore the magnetic anisotropy in this material. Uranium monosulfide crystallizes in a cubic, NaCl-type of crystal structure and exhibits the largest magnetocrystalline anisotropy observed in cubic systems. By performing detailed torque measurements we observe a strongly anisotropic behavior in the paramagnetic phase due to crystal defects and quadrupolar pair interactions. Our studies also confirm the presence of a large anisotropy in the ferromagnetic state of the US system with the <100>, <111>, and <110> directions being the hard, easy, and intermediate axes, respectively. Furthermore, the anisotropy in the paramagnetic phase shows similar characteristics to the anisotropy observed in the ferromagnetic phase, as characterized by second and fourth rank susceptibility terms. The similarity of the anisotropic behaviors in paramagnetic and ferromagnetic phases is the consequence of strong magnetoelastic properties in this system, which possibly lead to the rhombohedral structural distortion, not only in the ferromagnetic phase but also in the paramagnetic phase (induced by applied magnetic field).

36 MATERIALS SCIENCE↗