Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compact objects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

ASCA and Bepposax Observations of the Newly Discovered SNR RX J0852-4622

This grant supports an investigation of the supernova remnant RX J0852-4622 (G266.1-1.2), a large-diameter, nearby SNR for which the X-ray emission is dominated by nonthermal processes. As only the third such SNR discovered, for which there is direct evidence of cosmic-ray acceleration dominating the SNR dynamics, this is an exceptionally important object. Our progress on this study to date has been good. We have published the results of a spectral mapping of the XNR as well as the identification of a compact X-ray source which may be the associated neutron star. Our final work involves modeling of the emission using limits from the radio flux in order to estimate the inverse-Compton flux that might be observable in the TeV gamma-ray regime. We have just completed similar modeling of the emission from G347.3-0.5 (Lazendic et al. - submitted to ApJ), and the results have drawn considerable interest in the gamma-ray community (Slane 2002; astro-ph/0212353). Extensive observations of G266.1--1.2 with the CANGAROO TeV gamma-ray telescope have been carried out, and our modeling of the broad-band emission characteristic are of importance for such studies.

Slane, Patrick↗
NASA NTRS2008

Compact 6-DOF Stage for Optical Adjustments

The figure depicts selected aspects of a six-degree-of-freedom (6-DOF) stage for mechanical adjustment of an optical component. The six degrees of freedom are translations along the Cartesian axes (x, y, and z) and rotations about these axes (theta x, theta y, and theta z, respectively). Relative to prior such stages, this stage offers advantages of compactness, stability, and robustness, plus other advantages as described below. The stage was designed specifically as part of a laser velocimeter and altimeter in which light reflected by a distant object is collected by a Cassegrainian telescope and focused into a single-mode, polarization-maintaining optical fiber. The stage is used to position and orient the input end of the optical fiber with respect to the focal point of the telescope. Stages like this one can also be adapted for use in positioning and orienting other optical components, including lenses, prisms, apertures, and photodetectors.

Shafaat, Syed↗
NASA NTRS2019

Enabling Additive Manufacturing Technologies for Advanced Aero Propulsion Materials & Components

Additive manufacturing (AM) technologies are enabling for advanced high performance, propulsion component designs in electric motors1-2 and turbine engine systems in future electrified aircraft. AM offers significant benefits over conventional manufacturing to fabricate components that are more compact, lighter weight, geometrically complex, innovatively cooled, integrated, multi-material, and multifunctional. For turbine engine applications, silicon carbide (SiC) based composites are being pursued using binder jetting and laminated object manufacturing (LOM) for components such as shrouds, vanes, and recuperators. For electric motor applications, additive processes are being applied toward optimized component designs to include the housing, rotor, and stators with 3-D printing and wire imbedded coils and with direct printed 3-phase coils. The electrical conductivity of silver conductor coils optimized by evaluating alternate sintering methods and additions of graphene and carbon nanostructures will be presented. Potential benefits of new electric motor components in improving temperature capability, efficiency, and power density for reductions in energy consumption and emissions will be discussed.

Halbig, Michael C.↗
NASA NTRS2013

The Spatial Extent and Distribution of Star Formation in 3D-HST Mergers at z is approximately 1.5

We present an analysis of the spatial distribution of star formation in a sample of 60 visually identified galaxy merger candidates at z greater than 1. Our sample, drawn from the 3D-HST survey, is flux-limited and was selected to have high star formation rates based on fits of their broad-band, low spatial resolution spectral energy distributions. It includes plausible pre-merger (close pairs) and post-merger (single objects with tidal features) systems,with total stellar masses and star formation rates derived from multi-wavelength photometry. Here we use near-infrared slitless spectra from 3D-HST which produce H or [OIII] emission line maps as proxies for star-formation maps. This provides a first comprehensive high-resolution, empirical picture of where star formation occurred in galaxy mergers at the epoch of peak cosmic star formation rate. We find that detectable star formation can occur in one or both galaxy centres, or in tidal tails. The most common case (58%) is that star formation is largely concentrated in a single, compact region, coincident with the centre of (one of) the merger components. No correlations between star formation morphology and redshift, total stellar mass, or star formation rate are found. A restricted set of hydrodynamical merger simulationsbetween similarly massive and gas-rich objects implies that star formation should be detectable in both merger components, when the gas fractions of the individual components are the same. This suggests that z is approximately 1.5 mergers typically occur between galaxies whose gas fractions, masses, andor star formation rates are distinctly different from one another.

Spatial↗
NASA NTRS2008

Microwave Radiometers from 0.6 to 22 GHz for Juno, a Polar Orbiter around Jupiter

A compact radiometer instrument is under development at JPL for Juno, the next NASA New Frontiers mission, scheduled to launch in 2011. This instrument is called the MWR (MicroWave Radiometer), and its purpose is to measure the thermal emission from Jupiter's atmosphere at selected frequencies from 0.6 to 22 GHz. The objective is to measure the distributions and abundances of water and ammonia in Jupiter's atmosphere, with the goal of understanding the previously unobserved dynamics of the subcloud atmosphere, and to discriminate among models for planetary formation in our solar system. The MWR instrument is currently being developed to address these science questions for the Juno mission. As part of a deep space mission aboard a solar-powered spacecraft, MWR is designed to be compact, lightweight, and low power. The entire MWR instrument consists of six individual radiometer channels with approximately 4% bandwidth at 0.6, 1.25,2.6,5.2, 10,22 GHz operating in direct detection mode. Each radiometer channel has up to 80 dB of gain with a noise figure of several dB. The highest frequency channel uses a corrugated feedhorn and waveguide transmission lines, whereas all other channels use highly phase stable coaxial cables and either patch array or waveguide slot array antennas. Slot waveguide array antennas were chosen for the low loss at the next three highest frequencies and patch array antennas were implemented due to the mass constraint at the two lowest frequencies. The six radiometer channels receive their voltage supplies and control lines from an electronics unit that also provides the instrument communication interface to the Juno spacecraft. For calibration purposes each receiver has integrated noise diodes, a Dicke switch, and temperature sensors near each component that contributes to the noise figure. In addition, multiple sensors will be placed along the RF transmission lines and the antennas in order to measure temperature gradients. All antennas and RF transmission lines must withstand low temperatures and the harsh radiation environment surrounding Jupiter; the receivers and control electronics are protected by a radiation-shielding enclosure on the Juno spacecraft that also provides for a benign and stable operating temperature environment. This paper will focus on the concept of the MWR instrument and will present results of one breadboard receiver channel.

receiver↗
NASA NTRS1990

Interactive stars - Normal and compact stars in close binaries

The missions planned for the 1990's will greatly expand the knowledge of close binary systems and the physical phenomena that can be studied in a member of a close binary, from stellar active regions to the highest density black hole candidates known. These systems and the phenomena are reviewed with reference to major outstanding questions, the expected capability to answer them, and the expansion of capability that would be necessary. A 'super' XMM or LAMAR experiment with larger area, but similar moderate energy resolution and moderate spatial resolution, could detect 0.1 millisecond bursts from Cyg X-1 and 1 millisecond bursts in quiescent black hole candidates, measure Doppler and gravitational energy shifts in the iron line features for black holes and neutron stars. It would also identify these objects in galaxies a few Mpc away and open the way for evolution studies. A somewhat less ambitious goal would be high energy resolution of about the area of LAMAR to make full use of the information in the emission lines in both normal and compact binaries.

Swank, J. H.↗
NASA NTRS2011

High Resolution Rapid Response Observations of Compact Radio Sources with the Ceduna Hobart Interferometer (CHI)

Context. Frequent, simultaneous observations across the electromagnetic spectrum are essential to the study of a range of astrophysical phenomena including Active Galactic Nuclei. A key tool of such studies is the ability to observe an object when it flares i.e. exhibits a rapid and significant increase in its flux density. Aims. We describe the specific observational procedures and the calibration techniques that have been developed and tested to create a single baseline radio interferometer. that can rapidly observe a flaring object. This is the only facility that is dedicated to rapid high resolution radio observations of an object south of -30 degrees declination. An immediate application is to provide rapid contemporaneous radio coverage of AGN flaring at y-ray frequencies detected by the Fermi Gamma-ray Space Telescope. Methods. A single baseline interferometer was formed with radio telescopes in Hobart, Tasmania and Ceduna, South Australia. A software correlator was set up at the University of Tasmania to correlate these data. Results. Measurements of the flux densities of flaring objects can be made using our observing strategy within half an hour of a triggering event. These observations can be calibrated with amplitude errors better than 20%. Lower limits to the brightness temperatures of the sources can also be calculated using CHI. Key words. instrumentation:interferometers - galaxies:active - galaxies:jets - galaxies:nuclei quasars:general gamma rays:galaxies- 1.

Blanchard, Jay M.↗
NASA NTRS1980

Physical properties of individual coronal loops in a solar active region observed in the XUV

The physical properties of individual coronal loops in a solar active region observed in the XUV by the slitless objective grating spectroheliograph on board Skylab are investigated. Spectroheliograms of the normal active loop region McMath 12378 reveal three distinctive structural groups of loops in different temperature ranges, namely (1) small compact and smaller loops at temperatures of about 2,000,000 K observed in Fe XV and Fe XVI; (2) large Ne VII and Mg IX loops at temperatures from 500,000 to 1,000,000 K; and (3) chromospheric ribbons in He II and H alpha. The temperature of the active region is found to be uniform at about 2,000,000 K in the loops and background while loop density is found to be 3.5 x 10 to the 9th/cu cm in the loops and 2.5 x 10 to the 9th/cu cm in the surrounding background. Significant changes in the active region are observed in 24 h, although the gross temperature density structures of many loops do not show changes in 7 min. Gas pressure within the coronal loops is found to be about 40% greater than that of the background plasma. The observed loop parameters are noted to be consistent with flux-limited models of density enhancement in magnetic flux tubes and thus no esoteric heating function is required.

Cheng, C.-C.↗
NASA NTRS1981

A once-molten, coarse-grained, Ca-rich inclusion in Allende

A compact, spheroidal Type B inclusion in Allende contains melilite laths that project radially inward from the inclusion edge which show interference growth textures. The combined textural and chemical features of this object cannot be explained by independent vapor-solid condensation of grains in space, followed by random aggregation of these grains into an inclusion. Instead, it probably formed from a once-molten droplet that crystallized in response to radiative cooling from its outer surface. The crystallization sequence in this and another similar inclusion in which oxygen isotopes have been measured is melilite-spinel-anorthite-fassaite; this sequence shows that oxygen isotopic heterogeneities in coarse-grained inclusions were formed after complete solidification of these objects by partial exchange with a less O-16-rich gas, and not during or before a melting event.

Macpherson, G. J.↗
NASA NTRS1981

Far ultraviolet astronomy using the FAUST telescope

The Far Ultraviolet Space Telescope (FAUST) a compact, wide field-of-view, far ultraviolet instrument designed for astronomical observations of extended and point sources is discussed. The design and application of the instrument are described. The prime objective is to observe faint astronomical sources with sensitivities higher than previously available. Scientific programs will include: (1) a search for ultraviolet stars which are predicted to exist at the stage of evolution prior to the final death of a star; (2) observations of galaxies and quasars; and (3) joint programs with other Spacelab 1 experiments. The secondary objective is to verify the suitability of the Spacelab as a platform for far ultraviolet astronomy: data will be provided on the ultraviolet background levels due to astronomical, terrestrial, and spacecraft generated sources; the levels of contaminants which affect ultraviolet instruments; and the capability of the Orbiter for stable pointing at celestial sources for useful periods of time.

Bowyer, C. S.↗
NASA NTRS1990

A catalog of selected compact radio sources for the construction of an extragalactic radio/optical reference frame (Argue et al. 1984): Documentation for the machine-readable version

This document describes the machine readable version of the Selected Compact Radio Source Catalog as it is currently being distributed from the international network of astronomical data centers. It is intended to enable users to read and process the computerized catalog. The catalog contains 233 strong, compact extragalactic radio sources having identified optical counterparts. The machine version contains the same data as the published catalog and includes source identifications, equatorial positions at J2000.0 and their mean errors, object classifications, visual magnitudes, redshift, 5-GHz flux densities, and comments.

Source record↗
NASA NTRS1993

Research program on the Manson impact structure, Iowa

At or near the end of the Cretaceous, at least two large impact events occurred in the western hemisphere. One impact formed the 180-km diameter Chicxulub crater on the northern tip of the Yucatan peninsula. Another formed the 35-km diameter Manson structure in western Iowa. Several lines of evidence, including the chemical and isotopic composition of glass found in the K/T boundary layer at sites in the Gulf of Mexico and Caribbean region, the regional variation in thickness and the size of spherules in the K/T boundary layer, and indications at and near the boundary of disturbance and deposition of beds by giant waves in the Gulf of Mexico, point to Chicxulub as a major source of K/T boundary material, including a lower layer of clay at K/T boundary sites in western North America. The size, abundance, and mineral and lithic composition of shocked grains from an upper K/T boundary layer found at western North American sites, on the other hand, point to Manson as a possible source crater. More than one impact seems to be indicated by the K/T boundary stratigraphy in western North America, and present constraints on the age of the Manson structure suggest that it, as well as Chicxulub, may be a K/T boundary crater. Multiple craters produced over a relatively short interval of time are much more likely to have been formed by impact of comets rather than by impact of asteroids. Among likely mechanisms that could have produced multiple craters at or near the time of the K/T boundary are as follows: (1) splitting of a comet shortly before impact with Earth (impacts may have been spaced over about an hour), (2) fragmentation of a very large, Sun-grazing, periodic comet to form a compact stream of comets that intercepted the Earth's orbit (impacts may have been spread over about a century), and (3) perturbation of the Oort comet cloud by a passing massive object to form a comet shower in the inner solar system (impacts may have been spread over about a million years). Only in the first two cases are the impacts likely to have been close enough in time to contribute to the observed K/T boundary layers. All mechanisms could have produced many more than two craters.

Shoemaker, E. M.↗
NASA NTRS1995

Estimating the Cramer-Rao bound for restored astronomical observations

This work addresses the problem of assigning confidence intervals to estimated photometry data obtained from astronomical observations. The proposed solution is to estimate the Cramer-Rao bound, which is an analytical expression that describes the minimum obtainable mean square error associated with a given estimate of a parameter. This Letter presents a compact and simple form for the bound associated with a linear estimator such as a Wiener filter estimator. A prescription for estimating the variance associated with each element in a restored object was developed using an analytical model for observed data corrupted by either Poisson or Gaussian noise. Both one- and two-dimensional examples are presented.

Zaccheo, T. S.↗
NASA NTRS2008

Thermal Vacuum Testing of a Multi-Evaporator Miniature Loop Heat Pipe

Under NASA's New Millennium Program Space Technology 8 Project, four experiments are being developed for future small system applications requiring low mass, low power, and compactness. GSFC is responsible for developing the Thermal Loop experiment, which is an advanced thermal control system consisting of a miniature loop heat pipe (MLHP) with multiple evaporators and condensers. The objective is to validate the operation of an MLHP, including reliable start-ups, steady operation, heat load sharing, and tight temperature control over the range of 273K to 308K. An MLHP Breadboard has been built and tested for 1200 hours under the laboratory environment and 500 hours in a thermal vacuum chamber. Results of the TV tests are presented here.

Ku, Jentung↗
NASA NTRS1984

A catalog of selected compact radio sources for the construction of an extragalactic radio/optical reference frame

A catalog of 234 strong compact extragalactic radio sources that display optical counterparts is presented. This catalog identifies proposed sources for establishing an almost inertial reference frame against which the motions of the earth, solar system, galactic objects, and spacecraft may be measured. This catalog also defines those sources for which precise optical positions should be determined in order to relate this reference frame with the optical FK 5 fundamental system. The accuracy of the radio source positions of these sources is not greater than 0.1 arcsec with the majority not greater than 0.01 arcsec. Further refinement to not greater than 0.005 arcsec by future observations is expected soon.

Argue, A. N.↗
NASA NTRS1986

HC3N maps of OMC1

We have made 3.8 sec resolution maps of HC3N (J = 12-11) and 2.7 mm continuum emission in OMC1 using the OVRO mm interferometer. The continuum map, which traces dust column density, shows that the hot core region consists of several clumps, the densest of which lies 3 sec SE of IRc2. HC3N, which traces dense gas, shows the velocity structure in the region. There is no simple pattern of rotation or expansion, nor does the emission resemble a disk centered on IRc2. Since the velocity difference between the hot core and IRc2 and the velocity dispersion in the hot core are comparable with the orbital velocity at a distance of 3 sec. from a 20 M(solar) object, it is possible that the hot core material is bound to IRc2. In the channel at 10.4 km s(-1) V(LSR), we detect strong emission from the source 20 sec NE of IRc2, which confirms indications from continuum and CS (J = 2-1) maps that this is a very dense, possibly protostellar, object. This emission is clearly resolved from the hot core and is elongated north-south, along the direction of the ridge emission. An additional interesting feature in these maps is a compact high velocity source located 4 sec SW of IRc2. This source has a velocity dispersion greather than 20 km/s (FWHM) and is spatially coincident with the zero-offset source seen by Pauls et al. (1983) and a point source in the near IR images taken by Allen et al. (1984). The large localized velocity, dispersion and the highly obscured IR source suggest that this compact source is an outflow from a young stellar companion to IRc2.

Masson, C. R.↗
NASA NTRS1986

Cosmic gamma-ray lines

Recent observations of gamma-ray line emissions from gamma-ray bursts, the ISM, the Galactic center, and solar flares are reviewed, and the implications of these observations for high-energy processes in these sources are discussed. Line observations suggest that magnetized neutron stars are probably the best candidate objects for burst sources. Observations of the 1.809-MeV line from Al-26 decay provide evidence for ongoing nucleosynthesis in the Galaxy and information on the spatial distribution of nucleosynthetic sites. The compact 0.511-MeV line source is probably a black hole at or close to the Galactic center. Solar-flare studies have provided new information on the confinement and escape of charged particles at the sun and on multiple acceleration phases in solar flares.

Ramaty, R.↗