Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bulk techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Understanding cation doping achieved by atomic layer deposition for high-performance Li-Ion batteries

As Li ion battery (LIB) technology develops, its nanoscale design is attracting more and more interest. Atomic layer deposition (ALD) has emerged as a promising technique to provide conformal and ultrathin coating for LIB materials. In this work, an iron oxide (FeO x ) ALD was performed on LiMn 1.5 Ni 0.5 O-5 4 (LMNO) cathode particles, followed by an annealing process. Here, Fe was doped into LMNO during the ALD process; and it was found that lattice oxygen loss and structural change of LMNO occurred at a reaction temperature of 450 °C under vacuum. Meanwhile, Fe diffused from the surface to the bulk of LMNO. After post-annealing, FeO x -coated LMNO recovered its structure and lattice oxygen under proper annealing conditions, and exhibited significant enhancement of specific capacity, rate capability, and cyclic stability.

25 ENERGY STORAGE↗
DOE OSTI2023

Optically Enhanced Solid-State 1 H NMR Spectroscopy

Low sensitivity is the primary limitation to extending nuclear magnetic resonance (NMR) techniques to more advanced chemical and structural studies. Photochemically induced dynamic nuclear polarization (photo-CIDNP) is an NMR hyperpolarization technique where light is used to excite a suitable donor–acceptor system, creating a spin-correlated radical pair whose evolution drives nuclear hyperpolarization. Systems that exhibit photo-CIDNP in solids are not common, and this effect has, up to now, only been observed for 13 C and 15 N nuclei. However, the low gyromagnetic ratio and natural abundance of these nuclei trap the local hyperpolarization in the vicinity of the chromophore and limit the utility for bulk hyperpolarization. Here, we report the first example of optically enhanced solid-state 1 H NMR spectroscopy in the high-field regime. This is achieved via photo-CIDNP of a donor–chromophore–acceptor molecule in a frozen solution at 0.3 T and 85 K, where spontaneous spin diffusion among the abundant strongly coupled 1 H nuclei relays polarization through the whole sample, yielding a 16-fold bulk 1 H signal enhancement under continuous laser irradiation at 450 nm. These findings enable a new strategy for hyperpolarized NMR beyond the current limits of conventional microwave-driven DNP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mitigate Stress Corrosion Cracking (SCC) in High-strength Al Castings (CRADA 508)

Development of high strength, corrosion resistant, aluminum alloys is important to a number of industries, including automotive, aerospace, power, etc. Understanding how processing methods such as casting, chemistry, additives and recycle content affect an alloy’s microstructure and performance in real world environments is crucial to their implementation. One major concern is how the repeated exposure to saline solutions can be detrimental to the structural integrity of aluminum alloy components. This study was undertaken as a collaboration between Eck Industries and PNNL to investigate the stress corrosion cracking (SCC) and corrosion behavior of aluminum alloys. This work examines the SCC response of three different materials set. First is cast A206 Al alloy produced by three different casting techniques (i.e., permanent mold, and sand casting with and without chill) and with or without nano forming additives as potential grain refiners. The second materials set comprises Al alloy tubes extruded by PNNL’s ShAPE process and produced using raw material with three different ratios of twitch and pre-consumer Al 6061 scrap. Finally, the third materials set comprises two Al-Si-Mg-Fe alloys with controlled Si% and Fe% to mimic recycle grade Al alloys. The corrosion behavior of these materials was characterized using SCC testing and scanning electrochemical cell microscopy (SECCM) technique; mechanical behavior was characterized using tensile testing, and microstructure was characterized using optical and electron microscopy techniques. Of the A206 Al alloys, the samples with nano forming additives performed poorly compared to those without. The best SCC performance (i.e. least degradation in mechanical properties) was demonstrated by A206 alloy sand cast with chill while the permanent mold sample showed the worst SCC performance. The SECCM was performed on A206 alloy sand cast with chill to understand the effect of microstructure and determine the location-dependent corrosion properties on grain boundaries (GB) and inside grains (IG) on the sample. The corrosion potential and current measured on GB and IG at various points on the sample established that the GB locations are more cathodic and corrosive than the IG locations. Further work needs to be conducted to investigate the mechanisms behind the observed dependence of SCC on casting technique and nano forming additives. Among the ShAPE extruded tubes, SECCM data suggests the decreasing order of tendency to corrode as follows: 100% twitch > 75% twitch > 50% twitch. Finally, both variants of the Al-Si-Mg-Fe alloys showed a large volume fraction of Fe- and Si-containing intermetallics and additional work is needed to discern differences in their respective corrosion responses. In summary, correlating local electrochemical behavior (e.g. via SECCM) with micro/nanostructure, in conjunction with bulk mechanical behavior, can help identify the right fabrication method and alloy chemistry to minimize SCC issues in Al alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Correlation of SWIR imaging with LPBF 304L stainless steel part properties

In the Laser Powder Bed Fusion (LPBF) process, the local thermal history can vary significantly over a part as the heat transfer characteristics and the laser scan path are geometry dependent. The variations introduce the potential for defects that lead to part failure, some of which are difficult to identify non-destructively with common ex-situ evaluation techniques. These defects include significant microstructural and mechanical property differences in the part interiors. In this paper, thermal features are extracted from in-situ Short-Wave Infrared (SWIR) imaging measurements to compile voxel based part representations and understand how the complexities in the thermal history affect part performance. The deviations in thermal features due to different laser processing parameters and complex scan pathing are explored. Empirical correlations are developed to map thermal features with the engineering properties (bulk yield strength, area percentage porosity, and local state) of 304L stainless steel parts manufactured by LPBF. Processing modes (insufficient melting and keyholing) are determined by mapping part property measurements with multiple thermal features. Generating the relationships between thermographic measurements and resulting SLM part properties lays the foundation for in-situ part qualification.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Search for new heavy resonances decaying to WW, WZ, ZZ, WH, or ZH boson pairs in the all-jets final state in proton-proton collisions at √s = 13 TeV

A search for new heavy resonances decaying to WW, WZ, ZZ, WH, or ZH boson pairs in the all-jets final state is presented. The analysis is based on proton-proton collision data recorded by the CMS detector in 2016–2018 at a centre-of-mass energy of 13 TeV at the CERN LHC, corresponding to an integrated luminosity of 138 fb –1 . The search is sensitive to resonances with masses between 1.3 and 6 TeV, decaying to bosons that are highly Lorentz-boosted such that each of the bosons forms a single large-radius jet. Machine learning techniques are employed to identify such jets. No significant excess over the estimated standard model background is observed. A maximum local significance of 3.6 standard deviations, corresponding to a global significance of 2.3 standard deviations, is observed at masses of 2.1 and 2.9 TeV. In a heavy vector triplet model, spin-1 Z' and W' resonances with masses below 4.8 TeV are excluded at the 95% confidence level (CL). These limits are the most stringent to date. In a bulk graviton model, spin-2 gravitons and spin-0 radions with masses below 1.4 and 2.7 TeV, respectively, are excluded at 95% CL. Production of heavy resonances through vector boson fusion is constrained with upper cross section limits at 95% CL as low as 0.1 fb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Surface structure of water from soft X-ray second harmonic generation

The microscopic structure of water’s surface is crucial to many natural and industrial processes, but studying its hydrogen bond (H-bond) network directly remains challenging due to the required interfacial sensitivity of experimental techniques. By leveraging advances in flat liquid sheet microjets and terawatt-scale attosecond soft X-ray pulses from the LCLS X-ray free electron laser, we employed soft X-ray second harmonic generation (SXSHG) spectroscopy to examine the liquid water/vapor interface. SXSHG combines the elemental selectivity of X-ray spectroscopies with the surface selectivity of SHG and gives access to the electronic structure of interfacial species. Here, we show the SXSHG spectrum differs from bulk water’s X-ray absorption, with its peak shifted several eV, indicating a vastly different electronic environment at the interface as compared to the bulk. First-principles electronic structure calculations show the signal is highly sensitive to H-bond interactions, such as water molecules accepting a single H-bond, which are surface abundant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Angle-Resolved Polarized Raman Study of Layered Cr 2 Se 3

The polarization-resolved Raman spectra of two-dimensional Cr 2 Se 3 synthesized via chemical vapor deposition (CVD) and chemical vapor transport (CVT) techniques were investigated in detail. The samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). A distinct polarization dependence was observed in the Raman intensity of all the Cr-Cr, Cr-Se, and Se-Se modes in both samples. The observed angle-dependent Raman intensities of each peak could be related to the crystal structure-specific Raman tensor. XRD results of the bulk Cr 2 Se 3 sample synthesized via CVT confirm its trigonal crystal structure, and the Raman peaks can be fitted using the Raman tensors for the A g and E g modes for both the parallel and crossed polarizations. However, for the Cr 2 Se 3 samples directly grown on Si/SiO 2 substrates by CVD, it was necessary to assume the triclinic crystal structure in order to explain the polarized Raman dependence of all the peaks in both parallel and crossed polarization directions. Furthermore, this is the first experimental result suggesting the existence of triclinic Cr 2 Se 3 crystal structure, which has been theoretically predicted in the Materials Project database.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multiscale porosity characterization in additively manufactured polymer nanocomposites using micro-computed tomography

Extrusion-based additive manufacturing (AM) of polymer composites exhibits complex thermally driven phenomena that introduce severe discontinuities in the internal structure across length scales, especially voids or porosity. This study utilizes a high-throughput porosity characterization technique to analyze large datasets from numerous micro-computed tomography (mu CT) scans to capture the influence of AM print parameters on the size, shape, and location of porosity across multiple print layers (up to a few cm) on fused granular fabrication (FGF) printers. The materials investigated include nanocomposite formulations based on commercially relevant nylon-12 and polyether ketone ketone (PEKK) materials comprising nano- or micro- sized fillers. The estimated global porosity follows an inverse linear correlation against the bulk density of the printed samples. Increasing the extrusion multiplier (EM) and the nozzle temperature while decreasing the print speeds reduces the global porosity. Outlier analyses (local porosity morphology) show that faster print speeds and higher extrusion rates result in long, slender inter-layer voids, while lower nozzle temperatures lead to large, symmetrical, inter-bead voids (at the bead junction). Lack of active chamber temperature increases inter-layer and intra-bead voids with a two-fold increase in global porosity. Overall, the micro filler-reinforced composites exhibit higher global porosity than nanofiller-reinforced composites, which is attributed to the increased mismatch in the thermal expansion coefficient between the filler and the polymers used in the study.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electric-Field-Induced Assembly of an Ionic Liquid–Water Interphase Enables Efficient Heavy Metal Electrosorption

Controlling ion desolvation, transport, and charge transfer at the electrode-electrolyte interface (EEI) is critical to enabling the rational design of efficient and selective separation of targeted heavy metals and decontamination of industrial waste water. One challenge is to sufficiently resolve and interrogate the intermediate transformation steps between solvated metal cations and bare cations for electroreduction at the EEI and establish pathways to modulate these steps to achieve efficient energy transfer for targeted reactive separations. Herein, we obtained a predictive understanding of the effect of adding a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium chloride (EMIMCl), to an aqueous electrolyte on modulating the desolvation and electrosorption of Pb 2+ cations using a combination of experimental and theoretical techniques. Here, we reveal formation of a compact interphase layer consisting of EMIMCl-Pb complex clusters under an applied electric field using operando electrochemical Raman spectroscopy, atomic force microscopy, and electrochemical impedance spectroscopy measurements combined with classical molecular dynamics simulations. The application of a larger negative potential is shown to result in formation of a well oriented layer with the positive imidazolium ring of the EMIMCl lying on the electrode and the long hydrophobic alkyl chain extending into the bulk electrolyte. This oriented layer is demonstrated to facilitate desolvation of incoming solvated Pb 2+ cations and decrease the charge transfer resistance for Pb electrodeposition, which has important implications for selective removal of Pb from contaminated mixtures. Overall, our studies open up new opportunities to modulate ion desolvation using hydrophobic ionic liquids in aqueous electrolytes for efficient heavy metal separation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Solidification and grain formation in alloys: a 2D application of the grand-potential-based phase-field approach

Solidification is a significant step in the forming of crystalline structures during various manufacturing and material processing techniques. Solidification characteristics and the microstructures formed during the process dictate the properties and performance of the materials. Hence, understanding how the process conditions relate to various microstructure formations is paramount. In this work, a grand-potential-based multi-phase, multi-component, multi-order-parameter phase-field model is used to demonstrate the solidification of alloys in 2D. This model has several key advantages over other multi-phase models such as it decouples the bulk energy from the interfacial energy, removes the constraints for the phase concentration variable, and prevents spurious third-phase formation at the two phase interfaces. Here, the model is implemented in a finite-element-based phase-field modeling code. The role of various modeling parameters in governing the solidification rate and the shape of the solidified structure is evaluated. It is demonstrated that the process conditions such as temperature gradient, thermal diffusion, cooling rate, etc, influence the solidification characteristics by altering the level of undercooling. Furthermore, the capability of the model to capture directional solidification and polycrystalline structure formation exhibiting various grain shapes is illustrated. In both these cases, the process conditions have been related to the growth rate and associated shape of the dendritic structure. As a result, this work serves as a stepping stone towards resolving the larger problem of understanding the process–structure–property–performance correlation in solidified materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Using Co-Simulation to Model Interconnect-Scale Power Systems from Loads to Generators

Co-simulation is a modeling technique that allows analysts to combine simulation tools and their corresponding models to exchange data during run-time, allowing the creation of larger and more complex models across heterogeneous domains. HELICS is a co-simulation platform developed over the past six years that has been shown to be effective for these multi-domain analysis. Recently, a HELICS-based analysis was completed where the ERCOT electrical interconnect in the United States was modeled in high detail from bulk power system generation to individual customer loads. This model was used to evaluate a flat-rate and transactive energy tariff with integrated wholesale and retail real-time and day-ahead energy markets. This modeling allows detailed analysis showing how the operations of the power system under these tariffs impact all actors in the power system, from individual customers to bulk power system operators.

co-simulation, HELICS, transactive energy system, ↗
DOE OSTI2021

Investigations on the electronic properties and effect of chitosan capping on the structural and optical properties of zinc aluminate quantum dots

Quantum confined uncapped and chitosan capped nanoparticles of ZnAl 2 O 4 synthesized by microwave-assisted sol–gel method were investigated by structural analysis and optical techniques. X-ray diffraction studies confirmed the formation of cubic spinels with crystallite size 4.5 nm and 3.4 nm, respectively for uncapped and chitosan capped ZnAl 2 O 4 nanoparticles. Chitosan capping produced a blue shift in bandgap energy (3.84 to 3.94 eV) agreeing with size effects according to the Brus equation. A blue shift in emission peak and enhancement in photoluminescence intensity was also observed upon chitosan capping. The electronic band structure and the density of states of the bulk spinel were also calculated using density functional theory. The effective masses of electrons and holes estimated based on the band structure were used to extract the excitonic Bohr radius.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of Persistent Zero Modes and Superconducting Vortex Doublets in UTe 2

Superconducting vortices can reveal electron pairing details and nucleate topologically protected states. Yet, vortices of bulk spin-triplet superconductors have never been visualized at the atomic scale. Recently, UTe 2 has emerged as a prime spin-triplet superconductor, but its superconducting order parameter is elusive, and whether time-reversal symmetry (TRS) is broken remains unsettled. Here, in this work, we visualize vortices on the (011) surface of ultraclean UTe 2 single crystals (T c = 2.1 K) using scanning tunneling microscopy (STM). We introduce $\frac{d^{2}𝐼}{d𝑉^{2}}$ imaging as an effective technique for vortex visualization in superconductors with substantial residual zero-energy density of states (DOS), as in UTe 2 . Anisotropic single-flux-quantum vortices, with coherence lengths of ∼12 nm (4 nm) parallel (perpendicular) to the a -axis, form a triangular vortex lattice (VL) under a small out-of-plane magnetic field. The invariance of vortex structures and VL under changes of field polarity and cooling history strongly supports time-reversal invariant superconductivity under zero field. At vortex cores (VCs), nonsplit, spectrally sharp zero-bias conductance peaks (ZBPs) persist up 8 T that are consistent with symmetry-protected Majorana zero modes (MZMs) in a topological vortex line. Close examination of vortex structures reveals a mirror-asymmetric doublet─one with ZBPs and another with an enhanced apparent gap, possibly originating from a field-induced multicomponent order parameter.

UTe2↗
DOE OSTI2023

Flux Expulsion and Material Properties of Niobium Explored in 644-650 MHz Cavities

Upcoming projects requiring high-Q ~650 MHz medium-to-high-${\beta}$ elliptical cavities drive a need to understand magnetic RF loss mechanisms and mitigations in greater detail. High-temperature annealing and fast-cooldowns have proven effective techniques for promoting magnetic flux expulsion in cavities, however the extent of their effectiveness has been observed to vary between niobium material lot and vendor. We explore the fast-cooldown method, and high-temperature annealing (900{\deg}C) in 644-650 MHz cavities fabricated from two different niobium vendors: Tokyo-Denkai, and Ningxia. which promote flux-expulsion efficiency. Using EBSD and PPMS methods, we aim to trace cavity flux expulsion efficiency to specific, measurable properties of the bulk niobium material, which, if identified, can lead to methods by which the flux expulsion properties of Nb material can be predicted prior to cavity fabrication, and can enable fine-tuning of cavity temperature treatments.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Iron nitride permanent magnet and technique for forming iron nitride permanent magnet

A permanent magnet may include a Fe 16 N 2 phase constitution. In some examples, the permanent magnet may be formed by a technique that includes straining an iron wire or sheet comprising at least one iron crystal in a direction substantially parallel to a <001> crystal axis of the iron crystal; nitridizing the iron wire or sheet to form a nitridized iron wire or sheet; annealing the nitridized iron wire or sheet to form a Fe 16 N 2 phase constitution in at least a portion of the nitridized iron wire or sheet; and pressing the nitridized iron wires and sheets to form bulk permanent magnet.

Wang, Jian-Ping↗
DOE OSTI2021

Synthesis, structure, linear and nonlinear optical properties of noncentrosymmetric quaternary diamond-like semiconductors, Cu 2 ZnGeSe 4 (CZGSe) and the novel Cu 4 ZnGe 2 Se 7

In this work, two quaternary diamond-like semiconductors (DLSs) in the Cu-Zn-Ge-Se system, the known Cu 2 ZnGeSe 4 (also referred to as CZGSe) and the new Cu 4 ZnGe 2 Se 7 , are compared in terms of their crystal structures, electronic structures and physicochemical properties. Both compounds were prepared by high-temperature, solid-state synthesis at 800 degrees C. Single crystal X-ray diffraction was used to determine the structure of Cu 4 ZnGe 2 Se 7 . The structures of both Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 can be considered as derivatives of cubic diamond. Cu 4 ZnGe 2 Se 7 , with a reduced symmetry due to the cation ordering pattern, adopts the Cu 4 NiSi 2 S 7 structure type, with space group C2. The corner-sharing tetrahedra in Cu 4 ZnGe 2 Se 7 are slightly distorted because the charge for some of the S 2 - anions is not compensated by the first-nearest-neighbor cations. Rietveld refinements using synchrotron X-ray powder diffraction data were used to assess the phase purity of the samples and confirm the bulk structural behavior. Diffuse reflectance UV/Vis/NIR spectroscopy shows that Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 have direct optical bandgaps of 1.38 and 0.91 eV, respectively. Electronic structure calculations implementing density functional theory confirm the direct bandgap for Cu 4 ZnGe 2 Se 7 , with a calculated value of 0.62 eV. Both compounds are air stable, thermally stable up to relatively high temperatures, undergo phase transitions and have wide windows of optical clarity. The Kurtz-Perry powder technique was used to determine the second harmonic generation (SHG) responses using a commercial AgGaSe 2 standard. While Cu 4 ZnGe 2 Se 7 displays a weak SHG response, Cu 2 ZnGeSe 4 exhibits a response that is greater than several benchmark materials, with a large SHG coefficient, χ (2) , of 43 ± 6 pm/V at λ = 2900 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Revealing topology in metals using experimental protocols inspired by K-theory

Topological metals are conducting materials with gapless band structures and nontrivial edge-localized resonances. Their discovery has proven elusive because traditional topological classification methods require band gaps to define topological robustness. Inspired by recent theoretical developments that leverage techniques from the field of C*-algebras to identify topological metals, here, we directly observe topological phenomena in gapless acoustic crystals and realize a general experimental technique to demonstrate their topology. Specifically, we not only observe robust boundary-localized states in a topological acoustic metal, but also re-interpret a composite operator—mathematically derived from the K-theory of the problem—as a new Hamiltonian whose physical implementation allows us to directly observe a topological spectral flow and measure the topological invariants. Our observations and experimental protocols may offer insights for discovering topological behaviour across a wide array of artificial and natural materials that lack bulk band gaps.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Generalized Hall currents in topological insulators and superconductors

We generalize the idea of the quantized Hall current to count gapless edge states in topological materials, applying equally well to theories in different dimensions, with or without continuous symmetries in the bulk or chiral anomalies on the boundaries. This current is related to the index of the Euclidean fermion operator and can be calculated via one-loop Feynman diagrams. Quantization of the current is shown to be governed by topology in phase space, and the procedure can be applied to topological classes governed by either Z or Z 2 invariants. We analyze several explicit examples of free fermions in relativistic field theories. We speculate that it may be possible to extend the technique to interacting theories as well, such as the interesting cases where interactions gap the edge states.

79 ASTRONOMY AND ASTROPHYSICS↗