Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binary cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Phase equilibria of advanced technology uranium silicide-based nuclear fuel

The phases in uranium-silicide binary system were evaluated in regards to their stabilities, phase boundaries, crystal structures, and phase transitions. The results from this study were used in combination with a well assessed literature to optimize the U-Si phase diagram using the CALPHAD method. A thermodynamic database was developed, which could be used to guide nuclear fuel fabrication, could be incorporated into other nuclear fuel thermodynamic databases, or could be used to generate data required by fuel performance codes to model fuel behavior in normal or off-normal reactor operations. The U 3 Si 2 and U 3 Si 5 phases were modeled using the Compound Energy Formalism model with 3 sublattices to account for the variation in composition. The crystal structure used for the USi phase was the tetragonal with an I4/mmm space. Above 450°C, the U 3 Si 5 phase was modeled. The composition of the USi 2 phase was adjusted to USi 1.84 . The calculated invariant reactions and the enthalpy of formation for the stoichiometric phases were in agreement with experimental data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

First-principles study of thermophysical properties of interaction layer products in U-Mo/Al dispersion fuel

Thermophysical properties of interaction layer (IL) formed in U-Mo/Al dispersion fuel are important for the evaluation of its impact on the fuel performance. Binary and ternary phases observed in the IL, however, are not well studied yet. Recently we predicted the thermophysical properties of the binary U-Al compounds in U-Al system using density functional theory (DFT) calculations. In this paper, we investigated the structural, elastic, electronic, vibrational and thermodynamic properties of the ternary U-Mo-Al compounds formed in IL, including (U 0.75 ,Mo 0.25 )Al 3 , U 6 Mo 4 Al 43 and UMo 2 Al 20 , using DFT calculations. The polycrystalline aggregate properties of these compounds were obtained from the predicted single crystal elastic constants. The calculated electronic density of states confirm that all of the compounds exhibit typical metallic behavior with the majority states at the Fermi level dominated by U 5 f electrons. Using quasi-harmonic approximation, we predicted the thermodynamic properties of these compounds by including both electronic and lattice contributions. We also investigated the effect of density on the thermodynamic properties of (U 0.75 ,Mo 0.25 )Al 3 phase. Here, the current results are expected to be helpful to the modeling of the fuel performance of U-Mo/Al dispersion fuel and the thermodynamic modeling of the ternary U-Mo-Al system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermodynamic description of molten salt systems: KCl-LiCl-NaCl and KCl-LiCl-NdCl 3

The mixture of KCl and LiCl has been used as electrolyte in the electrorefining process to recover uranium from used nuclear fuels due to the low melting point. However, lanthanides and sodium in the reactor waste continuously dissolve into it and thus alter its thermodynamic properties. To understand the thermodynamic behavior evolution of the electrolyte with the accumulation of impurities, thermodynamic modeling for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and four constituent binary systems in the entire composition space was performed using the CALPHAD (CALculation of PHAse Diagrams) approach. The ionic liquid was described by the two-sublattice model, where neutral species were introduced to consider short-range ordering (SRO) within the melt, whereas the solid solution was modeled based on the Compound Energy Formalism. Literature data on phase equilibria and thermochemical properties were critically evaluated and used during the optimization of thermodynamic parameters for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and their subsystems. The calculated phase diagrams and mixing enthalpies are in good agreement with the experimental data. The thermodynamic modeling for the KCl-LiCl-NdCl 3 system was carried out for the first time. To fill the gap in experimental measurement, enthalpy of mixing for the KCl-LiCl-NdCl 3 melt was estimated using the surrounded-ion model. These data then served as critical inputs for thermodynamic optimization. Furthermore, the present study can provide insights into thermodynamic property evolution of the electrolyte and solubility limit of various impurities during the electrorefining process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ON THE FORMATION OF MULTIPLE STELLAR POPULATIONS IN GLOBULAR CLUSTERS

Nearly all globular clusters (GCs) studied to date show evidence for multiple stellar populations, in stark contrast to the conventional view that GCs are a mono-metallic, coeval population of stars. This generic feature must therefore emerge naturally within massive star cluster formation. Building on earlier work, we propose a simple physical model for the early evolution (several 10{sup 8} yr) of GCs. We consider the effects of stellar mass loss, Type II supernovae (SNe II) and prompt Type Ia supernovae (SNe Ia), ram pressure, and accretion from the ambient interstellar medium (ISM) on the development of a young GC's own gas reservoir. In our model, SNe II from a first generation of star formation clears the GC of its initial gas reservoir. Over the next several 10{sup 8} yr, mass lost from asymptotic giant branch stars and matter accreted from the ambient ISM collect at the center of the GC. This material must remain quite cool (T {approx} 10{sup 2} K), but does not catastrophically cool on a crossing time because of the high Lyman-Werner flux density in young GCs. The collection of gas within the GC must compete with ram pressure from the ambient ISM. After several 10{sup 8} yr, the Lyman-Werner photon flux density drops by more than three orders of magnitude, allowing molecular hydrogen and then stars to form. After this second generation of star formation, SNe II from the second generation and then prompt SNe Ia associated with the first generation maintain a gas-free GC, thereby ending the cycle of star formation events. Our model makes clear predictions for the presence or absence of multiple stellar populations within GCs as a function of GC mass and formation environment. While providing a natural explanation for the approximately equal number of first- and second-generation stars in GCs, substantial accretion from the ambient ISM may produce fewer chemically peculiar second-generation stars than are observed. Analyzing intermediate-age LMC clusters, we find for the first time evidence for a mass threshold of {approx}10{sup 4} M{sub sun} below which LMC clusters appear to be truly coeval. This threshold mass is consistent with our predictions for the mass at which ram pressure is capable of clearing gas from clusters in the LMC at the present epoch. Recently, claims have been made that multiple populations within GCs require that GCs form at the center of their own dark matter halos. We argue that such a scenario is implausible. Observations of the young and intermediate-age clusters in the LMC and M31 will provide strong constraints on our proposed scenario.

79 ASTRONOMY AND ASTROPHYSICS↗

Status Report on the Development of a Thermodynamic Database for Use with Metallic Fuel Design

The scope of this FY18 milestone involves the development of a high fidelity thermodynamic database for the U-Mo-Ti-Zr system to support the accelerated design of new pseudo binary U-xM metallic fuel, where M is a ternary metallic additive composed of Mo, Ti and Zr and x is the additive amount. Based on the previous assessment of the Mo-Ti-Zr ternary system performed in FY17, a complete set of thermodynamic model parameters describing the U-Mo-Ti-Zr quaternary system over the entire composition and temperature range have been developed in this work using the CALPHAD (CALculation of PHAse Diagrams) approach with inputs from both experimental measurements and density functional theory (DFT) total energy calculations. The two ternary intermetallic compounds, the delta phase in the U-Ti-Zr system and the cubic C15 Laves phase in the Mo-Ti-Zr system, are modeled using physically-based two-sublattice compound energy formalism. The liquid, bcc and hcp phases are described using the random solution model. Using the present database, the melting temperatures and bcc onset temperatures of U-xM metallic fuels are predicted as a function of both additive composition and amount. An optimal metallic additive composition has been identified in this work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigation of Interdiffusion Behavior in the Mo-Zr Binary System via Diffusion Couple Studies

Zirconium has recently garnered attention for use as a diffusion barrier between U–Mo metallic nuclear fuels and Al alloy cladding. In order to gain a fundamental understanding of the diffusional interactions, the interdiffusion behavior in the binary Mo–Zr system was investigated via solid-to-solid diffusion couples annealed in the temperature range of 750 to 1050 degrees C. A combination of scanning electron microscopy, X-ray energy dispersive spectroscopy, and electron probe microanalysis were used to examine the microstructure and concentration profiles across the interdiffusion zone. A large __-Zr (cI2) solid solution layer and a thin (approximately 1–2 um) layer of Mo2Zr (cF24) developed in all couples. Parabolic growth constants and concentration dependent interdiffusion coefficients were calculated for the Mo2Zr and Zr solid solution phases, respectively. The pre-exponential factor and activation energy for growth of the Mo2Zr phase were determined to be approximately 6.5 × 10- 15 m2/s and 90 kJ/mol, respectively. The interdiffusion coefficient in ___-Zr solid solution decreased with an increase in Mo concentration. Both the pre-exponential factors (2 × 10- 8 m2/s at 2 at.% Mo to near 5 × 10- 8 m2/s at 9 at.% Mo) and activation energies (140 kJ/mol at 2 at.% Mo to approximately 155 kJ/mol at 9 at.% Mo) of interdiffusion coefficients were determined to increase with an increase in Mo concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Bio-reduction of ferrihydrite-montmorillonite-organic matter complexes: Effect of montmorillonite and fate of organic matter

Organic matter (OM) is often associated with Fe (hydr)oxides such as ferrihydrite (Fh) in soils and sediments, forming binary Fh-OM complexes. Microbial reduction of Fh results in destabilization of the complexes and mineral/OM transformation. However, little is known about the role of clay minerals in such processes, despite their common co-existence with Fh and OM in natural environments. Here Fh-OM complexes were synthesized in the presence of montmorillonite (SWy-2), forming ternary Fh-(SWy-2)-OM complexes. A metal-reducing bacterium Geobacter sulfurreducens was used to reduce Fh in the complexes under circumneutral pH and anoxic conditions with or without H 2 as extra electron donor. Various spectroscopy and mass spectrometry methods were used to monitor the progress of Fh bio-reduction and mineral/OM transformation. Results showed that G. sulfurreducens utilized mineral-bound OM as electron donor and/or carbon source to couple with Fh reduction. Relative to Fh-OM complex, Addition of SWy-2 to Fh-OM complex enhanced the bio-reduction extent of Fh by increasing the proportion of bioavailable OM that was weakly bound to SWy-2. However, its effect on the bio-reduction rate was variable. SWy-2 initially decreased the rate, because it spatially separated OM (electron donor) from Fh (electron acceptor). During later incubation, SWy-2 increased the reduction rate by sorbing biogenic Fe 2+ that would otherwise passivate the Fh and cell surfaces. Bio-reduction transformed mineral-bound OM to microbial products (e.g. necromass, extracellular polymeric substances), but organic compounds with aromatic structures, carboxyl groups and large molecular weight were more resistant to desorption and oxidation. The persistence of these compounds against bio-reduction induced transformation is likely due to their stronger binding with minerals and/or lower nominal oxidation states of carbon relative to other compounds. Our results provide new insights into the role of clay minerals in regulating biogeochemical cycling of solid-phase Fe and transformation of mineral-associated OM in anoxic soil environments.

58 GEOSCIENCES↗

Nuclear Metal Fuel Casting Modeling Annual Report 2013

Actinide burning fuels in fast reactor applications have been a traditional approach. Recently, the use of metallic fuels in light-water reactors (LWR) applications has also been suggested. Although there has been some experience with the casting of cylindrical metallic binary or ternary fuels in the past, renewed attention to the casting of metallic fuels arises due to the fact that not only do we need to cast traditional constituents such as Pu, Zr, and U, but also add more difficult actinides such as Am and Np. Casting metallic fuel rods shows great promise, but fuel and transuranic losses must be minimized. Issues critical to the manufacture of transuranic containing fuels include fuel holdup in crucibles and molds, fuel loss into dross from crucible and mold wash coatings, generation of contaminated wastes such as mold pieces, and loss of volatile constituents from the crucible during heating and casting. This final issue potentially constrains the caster to a positive pressure design because Am has a high partial pressure allowing it to volatize from the liquid metal under vacuum. There have been several primary studies investigating the actinide volatilization issue in order to improve the caster design. As part of these efforts, a bench scale casting apparatus has been designed. Fuel manufacturing process modeling and simulation is a cost-effective way to explore some of the above-mentioned issues for the development of new manufacturing processes yielding minimum loss.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Summary and Assessment of Metal Fuel Capabilities in Bison

The work described in this report was performed under funding from the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. This report is issued in satisfaction of the level 2 milestone M2MS-18IN0201012 on Release Bison with Initial Metallic Fuel Performance Capability. Metallic fuel development began in Bison a few years after light water reactor development began (~ 2009). The initial development was funded by the Advanced Fuels Campaign. With recent interest from industry, the Nuclear Regulatory Commission, and the Versatile Test Reactor program, the Nuclear Energy Modeling Simulation Program has increased funding for metallic fuel development and validation in FY18. The material models with the most mature development are binary uranium-zirconium and ternary uranium-plutonium-zirconium alloys for fuel and HT9 for cladding. The first material models were incorporated from open literature sources, which include mechanical and thermal material properties that are functions of temperature, porosity, and zirconium concentration, swelling, fission gas release, zirconium diffusion, creep, and sodium coolant channel boundary conditions. These material models have been utilized to simulate ERB-II fuel pins and the results compared to measurements. The EBR-II experiment measurements mostly consist of cladding strain and zirconium redistribution. As such, comparisons to EBR-II measurements are currently limited to these two figures of merit. Simulations and comparisons to experiment measurements have also been done for transient testing of EBR- II fuel pins in TREAT, which included temperature measurements. Preliminary comparisons between Bison calculations and experiment measurements are favorable. These comparisons have also highlighted the importance of the fuel swelling and fission gas release models on cladding strain. Also, Bison metallic fuel simulations are currently being run in support of ATR experiments and VTR exploratory design calculations. Further development and evaluation of individual material models and fuel system models are planned for FY19.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis and Thermal Property Investigations into Ternary Actinide Chloride Salt Systems Containing UCl3 and PuCl3

While regulators, the scientific community, and MSR developers still lack access to literature data on the thermal properties of clean fuel salts, even less information is available on the properties of fuel salts containing impurities. It is essential to understand, benchmark, and predict crucial data on the changes in thermal properties of fuel salt systems due to impurities arising from moisture, corrosion, and reactor operation (i.e., fission products). This research focuses on two actinide fuel salts (1) to investigate a worst-case scenario buildup of actinide fission product in a NaCl-UCl3 eutectic fuel salt and (2) to investigate NaCl-PuCl3 eutectic salt after 1000 hours of operation in a natural circulation flow loop flow to determine if corrosion or atmospheric (moisture/oxygen) products are present. For the first salt, a conservative assumption or worst-case scenario, for fission product buildup in a fuel salt was investigated by adding PuCl3 to eutectic 67 mol% NaCl – 33 mol% UCl3 salt resulting in a ternary salt having a composition of 61 mol% NaCl – 30 mol% UCl3 – 9mol% PuCl3. Addition of PuCl3 to eutectic NaCl-UCl3 resulted in a ternary salt that had a higher melting temperature than either the NaCl-PuCl3 or NaCl-UCl3 binary eutectic mixture. Addition of PuCl3 also resulted in an increase in density which was expected. The second salt was extracted from a micro loop. The composition of the fuel (primary) salt prior to flow loop operations was determined to be 64 mol% NaCl – 36 mol% PuCl3, however, the post-flow loop salt showed increased levels of MgCl2 and NaCl changing the salt composition to 10 mol% MgCl2 – 63mol% NaCl – 26mol% PuCl3) indicating the primary salt interacted with the rinse salt. Analysis of the post flow loop salt detected low concentrations of Al, Ni, Co, Nb, and Zr, most likely corrosion products from the flow loop material of construction. Contamination of the fuel salt (with the rinse salt NaCl-MgCl2) decreased the density by approximately 10% and reduced the onset of melting temperature by 50 °C, from 451 °C to approximately 400 °C. Results from the fission product simulated salt (61 mol% NaCl – 30 mol% UCl3 – 9mol% PuCl3) and the corrosion product salt (10 mol% MgCl2 – 63mol% NaCl – 26mol% PuCl3) will be included in two separate manuscripts for submission to peer-reviewed journals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Simulation Aided Metallic Fuel Design

Nuclear engineering is reaching a domain space in which computational power and methods are starting to surpass the models that are used to simulate nuclear fuel rods. As these models are updated, simulations utilizing different compositions, operating conditions, fabrication techniques, and geometries can provide core designers with an important first step towards fuel qualification. Due to the cost associated with fuel irradiations, it can be expected that time and money spent building better fuel models may provide an attractive return during initial studies of advanced fuels, especially with regards to fuels beyond the extensively studied uranium oxide system. In general, the primary U.S. experience with irradiated fuel rods beyond traditional oxide fuel is with binary (U-Zr) and ternary (U-Pu-Zr) metal fuels. The bulk of the experimental data for metal fuels is obtained from rods irradiated in the EBR-II sodium fast reactor (SFR), thus many of the correlations developed for metal fuels comes from the post-irradiation (PIE) examination of EBR-II rods. One of the unique characteristics that set U-Pu-Zr fuels apart from traditional oxide fuels is the presence of different phases that develop in the fuel during irradiation. Each of these different phases has unique thermal, mechanical, and diffusive behavior. The transitions between these phases are not static as the initially homogenous zirconium diffuses towards the center and edge of the fuel rod, resulting in a low-Zr, high-U ring. Along with the differing material properties that occur in each phase, the increase in uranium corresponds to an increase in localized fission and power production. The direct coupling between the thermal and diffusion solves highlights one of the many examples of tightly coupled phenomenon that are present in nuclear fuel, and motivation for the development of codes that simultaneously solve each piece of physics in a fully-coupled manner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of Ion Irradiation on Amorphous and Crystalline Ge–Se and Their Application as Phase Change Temperature Sensor

Research on phase change materials is predominantly focused on their application as memory devices or for temperature control which requires low phase change temperature. The Ge–Se binary chalcogenide glass system with its wide glass-forming region is a potential candidate for high-temperature and high-radiation phase change applications. In this study, the concept of employing Ge x Se 100– x glasses to monitor high temperature (450–528 °C) using the phase change effect, is reported. Materials selection, device structure, and performance of prototype sensors are analyzed. In addition, the effect of heavy ion irradiation by Xe ions with energies of 200, 600, and 1000 keV (fluence ≈10 14 cm –2 ) on the Ge x Se 100– x ( x = 30, 33, 40) thin films and phase change devices is studied. The irradiation effect on the amorphous and crystalline structure of the thin films is evaluated by Raman spectroscopy and X-ray diffraction (XRD). Although the changes in the structural units of amorphous films are negligible, in crystalline films orthorhombic-GeSe 2 crystals are found to be most affected by irradiation and a new phase, orthorhombic GeSe is found in the thin films after irradiation. The performance of a sensor with an active film of Ge 40 Se 60 is also shown as an example.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

THE PANCHROMATIC HUBBLE ANDROMEDA TREASURY. I. BRIGHT UV STARS IN THE BULGE OF M31

As part of the Panchromatic Hubble Andromeda Treasury multi-cycle program, we observed a 12' Multiplication-Sign 6.'5 area of the bulge of M31 with the WFC3/UVIS filters F275W and F336W. From these data we have assembled a sample of {approx}4000 UV-bright, old stars, vastly larger than previously available. We use updated Padova stellar evolutionary tracks to classify these hot stars into three classes: Post-AGB stars (P-AGB), Post-Early AGB (PE-AGB) stars, and AGB-manque stars. P-AGB stars are the end result of the asymptotic giant branch (AGB) phase and are expected in a wide range of stellar populations, whereas PE-AGB and AGB-manque (together referred to as the hot post-horizontal branch; HP-HB) stars are the result of insufficient envelope masses to allow a full AGB phase, and are expected to be particularly prominent at high helium or {alpha} abundances when the mass loss on the red giant branch is high. Our data support previous claims that most UV-bright sources in the bulge are likely hot (extreme) horizontal branch (EHB) stars and their progeny. We construct the first radial profiles of these stellar populations and show that they are highly centrally concentrated, even more so than the integrated UV or optical light. However, we find that this UV-bright population does not dominate the total UV luminosity at any radius, as we are detecting only the progeny of the EHB stars that are the likely source of the UV excess. We calculate that only a few percent of main-sequence stars in the central bulge can have gone through the HP-HB phase and that this percentage decreases strongly with distance from the center. We also find that the surface density of hot UV-bright stars has the same radial variation as that of low-mass X-ray binaries. We discuss age, metallicity, and abundance variations as possible explanations for the observed radial variation in the UV-bright population.

79 ASTRONOMY AND ASTROPHYSICS↗

VARIATIONS OF THE 10 mum SILICATE FEATURES IN THE ACTIVELY ACCRETING T TAURI STARS: DG Tau AND XZ Tau

Using the Infrared Spectrograph aboard the Spitzer Space Telescope, we observed multiple epochs of 11 actively accreting T Tauri stars in the nearby Taurus-Auriga star-forming region. In total, 88 low-resolution mid-infrared spectra were collected over 1.5 years in Cycles 2 and 3. The results of this multi-epoch survey show that the 10 mum silicate complex in the spectra of two sources-DG Tau and XZ Tau-undergoes significant variations with the silicate feature growing both weaker and stronger over month- and year-long timescales. Shorter timescale variations on day- to week-long timescales were not detected within the measured flux errors. The time resolution coverage of this data set is inadequate for determining if the variations are periodic. Pure emission compositional models of the silicate complex in each epoch of the DG Tau and XZ Tau spectra provide poor fits to the observed silicate features. These results agree with those of previous groups that attempted to fit only single-epoch observations of these sources. Simple two-temperature, two-slab models with similar compositions successfully reproduce the observed variations in the silicate features. These models hint at a self-absorption origin of the diminution of the silicate complex instead of a compositional change in the population of emitting dust grains. We discuss several scenarios for producing such variability including disk shadowing, vertical mixing, variations in disk heating, and disk wind events associated with accretion outbursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Approaches for Water Removal in Direct-Fired sCO 2 Power Cycles

There is interest in investigation of water removal processes in direct fired sCO 2 flows, as this may potentially lead to greater system efficiency as the removal of this contaminant will result in sCO 2 behaving close to idealized behaviors. Water removal should be split into a two-step process, condensation of the water, followed by separation of the liquid phase water from the sCO 2 . The two main avenues of condensation are manipulation of pressure and temperature for phase change. For this paper, temperature-based phase change is the primary focus through the implementation of heat exchangers. Of the heat exchangers investigated it was found that printed circuit heat exchangers (PCHEs) could be an alternative for this use case, though the specific design of flow channel geometry and flow direction depends on the specific system case and cannot be determined at this point. For water separation there were four processes identified, all of which already assume water is in liquid phase at that point in the system. Of these separation avenues the best candidate is the hydrocyclone as it has a proven history of separating liquid-liquid phase mixtures with small density differences in oilfield use, in addition they have been investigated and modeled specifically for water separation for sCO 2 flows and the footprint is relatively small.

20 FOSSIL-FUELED POWER PLANTS↗

On visualizing material flow and precipitate evolution during probeless friction stir spot welding of an Al-Li alloy

Highlights: • Severe thermal cycle and deformation refined grains and intermetallic particles in SZ. • T{sub 1} phases fully dissolved in SZ followed by re-precipitation of GP zone and δ′ phases. • The predominant flow direction remained in spiral-like pattern during P-FSSW. • Local abrasion existed in the lap-weld interface due to flow difference, forming joining. - Abstract: The precipitate evolution and material flow visualization during probeless friction stir spot welding (P-FSSW) of an Al-Li alloy has been investigated experimentally and numerically in this work. Due to severe heat input during welding, the main strengthening phases of T{sub 1} fully dissolved in the stir zone followed by the re-precipitation of GP zone and δ′ phases, assisted with the refinement of the intermetallic particles and grains. The history of material flow was three-dimensionally visualized with a tracer, studied with X-ray tomography. The experiments and the simulation results provided a consistent interpretation of a circumferential material flow which moved inwards radially near the top surface. Upward flow in the bottom sheet improved with dwell time, causing the interface to bend. Local abrasion between the two sheets due to flow difference led to the disruption of oxide layer, and formed a connection at the interface.

36 MATERIALS SCIENCE↗

Development of molecular dynamics potential for uranium silicide fuels

The use of uranium-silicide (U-Si) in place of uranium dioxide (UO{sub 2}) is one of the promising concepts being proposed to increase the accident tolerance of nuclear fuels for light water reactors. First-principles based density functional theory (DFT) electronic structure calculations may provide the most reliable information. However, it is probably not possible to obtain kinetic information such as amorphization under irradiation directly from DFT simulations due to size and time limitations. Thus, a more feasible way may be to employ molecular dynamics (MD) simulation. Unfortunately, so far no MD potential is available for U-Si to discover the underlying mechanisms. Here, we present our recent progress in developing a U-Si potential. The development is based on the Tersoff type potentials for single element U and Si. The Si potential is taken from the literature and a Tersoff type U potential is developed in this project. With the primary focus on the U{sub 3}Si{sub 2} phase, some other U-Si systems such as U{sub 3}Si are also included as a test of the transferability of the potentials for binary U-Si phases. Based on the potentials for unary U and Si, two sets of parameters for the binary U-Si system are developed using the Tersoff mixing rules and the cross-term fitting, respectively. The cross-term potential is found to give better results on the enthalpy of formation, lattice constants and elastic constants than those produced by the Tersoff mixing potential, with the reference data taken from either experiments or DFT calculations. In particular, the results on the formation enthalpy and lattice constants for the U{sub 3}Si{sub 2} phase and lattice constants for the high temperature U{sub 3}Si (h-U{sub 3}Si) phase generated by the cross-term potential agree well with experimental data. Reasonable agreements are also reached on the elastic constants of U{sub 3}Si{sub 2}, on the formation enthalpy for the low temperature U{sub 3}Si (m-U{sub 3}Si) and h-U{sub 3}Si phases, and on the lattice constants of m-U{sub 3}Si phase. All these phases are predicted to be mechanically stable. The unary U potential is also tested for three metallic U phases (α, β, γ). The potential is found capable to predict the cohesive energies well against experimental data for all three phases. It matches reasonably with previous experiments on the lattice constants and elastic constants of αU. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enthalpies of formation and phase stability relations of USi, U 3 Si 5 and U 3 Si 2

U–Si intermetallic compounds have drawn great attention due to their potential application as nuclear fuels. However, the thermodynamic properties and phase equilibria of this binary system from ambient to high temperature conditions are not fully understood. Via high temperature oxidative drop calorimetry and detailed characterization of the initial and final phases, we have experimentally determined the standard enthalpies of formation of USi and U 3 Si 5.07 at 298 K to be –43.2 ± 6.2 and –43.8 ± 9.0 kJ/mol·atom, respectively. The energetics of the tetragonal USi (t-USi, space group I 4/ mmm ) phase has also been calculated with Density Functional Theory (DFT) for the first time. Combining the obtained formation enthalpies with the heat capacities measured previously, we assessed the thermodynamic stability of t-USi relative to a phase assemblage of two other U–Si phases, U 3 Si 5.07 and U 3 Si 2 , from ambient temperature to 1200 K. The tetragonal USi is thermodynamically more stable than U 3 Si 5.07 + U 3 Si 2 , which supports previously published phase diagram (H. Okamoto and T. Massalski, 1990 [1]): specifically, at least one stable USi phase exists when the U content is 50 at.%. In conclusion, further thermodynamic and phase equilibrium studies are needed for a more comprehensive understanding of the U–Si system across broader compositional and temperature ranges.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗