Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “best practice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

How Climate and Data Quality Impact Photovoltaic Performance Loss Rate Estimations

Different data pipelines and statistical methods are applied to photovoltaic (PV) performance datasets to quantify the performance loss rate (PLR). Since the real values of PLR are unknown, a variety of unvalidated values are reported. As such, the PV industry commonly assumes PLR based on statistically extracted ranges from the literature. However, the accuracy and uncertainty of PLR depend on several parameters including seasonality, local climatic conditions, and the response of a particular PV technology. In addition, the specific data pipeline and statistical method used affect the accuracy and uncertainty. To provide insights, a framework of (≈200 million) synthetic simulations of PV performance datasets using data from different climates is developed. Time series with known PLR and data quality are synthesized, and large parametric studies are conducted to examine the accuracy and uncertainty of different statistical approaches over the contiguous US, with an emphasis on the publicly available and “standardized” library, RdTools . In the results, it is confirmed that PLRs from RdTools are unbiased on average, but the accuracy and uncertainty of individual PLR estimates vary with climate zone, data quality, PV technology, and choice of analysis workflow. Best practices and improvement recommendations based on the findings of this study are provided.

14 SOLAR ENERGY↗
DOE OSTI2024

Review of Technical Photovoltaic Key Performance Indicators and the Importance of Data Quality Routines

Technical key performance indicators (KPIs) are important metrics used to assess and quantitatively summarize various aspects of photovoltaic (PV) systems, including long-term performance, economic viability, and carbon footprint. Herein, a group of experts of the International Energy Agency's Photovoltaic Power Systems Programme Task 13 collect and describ the most important technical KPIs used in the industry. Thereby, a set of best practices for reliably handling PV system data is presented and the impact of data quality and climatic variability on KPI calculation is investigated. Further, the effective use of technical KPIs allows triggering data-driven and informed decisions to optimize PV systems and providing a comprehensive overview of how PV systems operate across different conditions and climates. With the worldwide growth of the PV industry, more companies operate/own PV systems in different regions, where the climatic and seasonal profiles differ. This requires context-aware evaluation of KPIs, or the judicious application of multiple KPIs, to ensure that each asset is evaluated correctly. Beyond that, there is untapped potential in the utilization of KPIs through geospatial mapping and extrapolation of fleet KPIs. This study demonstrates that the uncertainty in KPI estimation is not well understood and depends on data quality, climatic variability, and system configuration.

14 SOLAR ENERGY↗
DOE OSTI2025

Fragme∩t: An Open‐Source Framework for Multiscale Quantum Chemistry Based on Fragmentation

Fragment-based quantum chemistry offers a means to circumvent the nonlinear computational scaling of conventional electronic structure calculations, by partitioning a large calculation into smaller subsystems then considering the many-body interactions between them. Variants of this approach have been used to parameterize classical force fields and machine learning potentials, applications that benefit from interoperability between quantum chemistry codes. However, there is a dearth of software that provides interoperability yet is purpose-built to handle the combinatorial complexity of fragment-based calculations. To fill this void we introduce “Fragme∩t”, an open-source software application that provides a tool for community validation of fragment-based methods, a platform for developing new approximations, and a framework for analyzing many-body interactions. Fragme∩t includes algorithms for automatic fragment generation and structure modification, and for distance- and energy-based screening of the requisite subsystems. Checkpointing, database management, and parallelization are handled internally and results are archived in a portable database. Interfaces to various quantum chemistry engines are easy to write and exist already for Q-Chem, PySCF, xTB, Orca, CP2K, MRCC, Psi4, NWChem, GAMESS, and MOPAC. Applications reported here demonstrate parallel efficiencies around 96% on more than 1000 processors but also showcase that the code can handle large-scale protein fragmentation using only workstation hardware, all with a codebase that is designed to be usable by non-experts. Fragme∩t conforms to modern software engineering best practices and is built upon well established technologies including Python, SQLite, and Ray. The source code is available under the Apache 2.0 license.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantifying sensitivity in numerical weather prediction-modeled offshore wind speeds through an ensemble modeling approach

A decade of research has shown that numerical weather prediction (NWP)-modeled wind speeds can be highly sensitive to the inputs and setups within the NWP model. For wind resource characterization applications, this sensitivity is often addressed by constructing a range of setups and selecting the one that best validates against observations. However, this approach is not possible in areas that lack high-quality hub height observations, especially offshore wind areas. In such cases, techniques to quantify and disseminate confidence in NWP-modeled wind speeds in the absence of observations are needed. We address this need in the present study and propose best practices for quantifying the spread in NWP-modeled wind speeds. We implement an ensemble approach in which we consider 24 different setups to the Weather Research and Forecasting (WRF) model. We construct the ensemble by considering variations in WRF version, WRF namelist, atmospheric forcing, and sea surface temperature (SST) forcing. Our analysis finds that the standard deviation produces more consistent estimates compared to the interquartile range and tends to be the more conservative estimator for ensemble variability. We further find that model spread increases closer to the surface and on shorter time scales. In conclusion, we explore methods to attribute total ensemble variability to the different ensemble components (e.g., atmospheric forcing and SST product) and find that contributions by components also vary depending on time scale. We anticipate that the methods and results presented in this paper will provide a reasonable foundation for further research into ensemble-based wind resource data sets.

17 WIND ENERGY↗
DOE OSTI2024

OC6 Phase IV: Validation of CFD Models for Stiesdal TetraSpar Floating Offshore Wind Platform

ABSTRACT With only a few floating offshore wind turbine (FOWT) farms deployed anywhere in the world, FOWT technology is still in its infancy, building on a modicum of real‐world experience to advance the nascent industry. To support further development, engineers rely heavily on modeling tools to accurately portray the behavior of these complex systems under realistic environmental conditions. This reliance creates a need for verification and validation of such tools to improve reliability of load and dynamic response prediction and analysis capabilities of FOWT systems. The Offshore Code Comparison Collaboration, Continued with Correlation and unCertainty (OC6) project was created under the framework of the International Energy Agency to address this need and considers a three‐sided verification and validation between engineering level models, computational fluid dynamics (CFD), and experimental results. In this paper, a novel floating offshore wind platform, the Stiesdal TetraSpar, is simulated using CFD under the load conditions defined by Phase IV of the OC6 project. The comparison of these CFD results against the experimental results demonstrated the ability to predict the platform response to waves when imposing the measured wave signals as input. Although validation versus experiment was largely successful, the damping behavior was impacted by uncertainties likely originating from the mooring system and sensor umbilical cable. This extensive comparison effort with multiple CFD practitioners offers insight into best practices to achieve reliable results.

17 WIND ENERGY↗
DOE OSTI2022

Reference surface excess isotherms for carbon dioxide adsorption on ammonium ZSM-5 at various temperatures

Abstract This work is part of the effort at the Facility for Adsorbent Characterization and Testing (FACT lab) at the National Institute of Standards and Technology (NIST) to develop reference materials, reference data, and measurement best practices for adsorption metrology. High-pressure surface excess isotherms for CO 2 adsorption on NIST Reference Material 8852 (ammonium ZSM-5) at 15 °C, 25 °C, and 35 °C are reported, expanding on a FACT Lab-organized international interlaboratory study on this sorbent/sorbate pair at 20 °C. The range of temperatures of the present study is of interest for many CO 2 adsorption measurements and applications. Measurements were made using five different adsorption instruments, both manometric and gravimetric. Excellent agreement in the measured isotherms among the instruments was found. An empirical reference equation of the form, $${n}_{ex,ref}({P}_{eq})=\frac{c}{\{{1+\mathrm{exp}[\left(-\mathrm{ln}\left(P\right)+a\right)/b ]\}}^{b }} ,$$ n e x , r e f ( P eq ) = c { 1 + exp [ - ln P + a / b ] } b , [ n ex,ref is surface excess uptake (mmol/g); P eq is equilibrium pressure (MPa); P is ( P eq )/(1 MPa)]; a , b , c are constants] and the 95% uncertainty interval were determined for the isotherms at each of the temperatures. Lastly, the isosteric heat of adsorption is estimated from absolute isotherms derived from the surface excess reference data.

Nguyen, Huong Giang T. (ORCID:0000000210527565)↗
DOE OSTI2021

An empirical investigation of organic software product lines

Abstract Software product line engineering is a best practice for managing reuse in families of software systems that is increasingly being applied to novel and emerging domains. In this work we investigate the use of software product line engineering in one of these new domains, synthetic biology. In synthetic biology living organisms are programmed to perform new functions or improve existing functions. These programs are designed and constructed using small building blocks made out of DNA. We conjecture that there are families of products that consist of common and variable DNA parts, and we can leverage product line engineering to help synthetic biologists build, evolve, and reuse DNA parts. In this paper we perform an investigation of domain engineering that leverages an open-source repository of more than 45,000 reusable DNA parts. We show the feasibility of these new types of product line models by identifying features and related artifacts in up to 93.5% of products, and that there is indeed both commonality and variability. We then construct feature models for four commonly engineered functions leading to product lines ranging from 10 to 7.5 × 10 20 products. In a case study we demonstrate how we can use the feature models to help guide new experimentation in aspects of application engineering. Finally, in an empirical study we demonstrate the effectiveness and efficiency of automated reverse engineering on both complete and incomplete sets of products. In the process of these studies, we highlight key challenges and uncovered limitations of existing SPL techniques and tools which provide a roadmap for making SPL engineering applicable to new and emerging domains.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Results from the fifth galaxy serpent exercise

Galaxy Serpent is an ongoing series of virtual, web-based international tabletop exercises designed to advance the application of National Nuclear Forensics Libraries (NNFLs) in investigations involving nuclear and other radioactive material found out of regulatory control. Here, this iteration emphasized interactions between scientific teams and mock investigative entities. Participants utilized their provided NNFLs to assess material consistency with a provided database of holdings, assign confidence levels, and identify key characteristics relevant to investigative queries. The exercise highlighted both challenges encountered and lessons learned, and advanced best practices for integrating a NNFL into nuclear forensics as part of an investigation.

Database↗
DOE OSTI2025

Nuclear forensic analysis on uranium ore concentrates: A multi-laboratory intercomparison study

A collaboration between the United States and Japan performed nuclear forensic analyses on a set of 7 uranium ore concentrate (UOC) samples with known origins to improve methodologies and best practices in the field. Overall, good agreement between the 4 participating laboratories was achieved for uranium assay, uranium isotope composition, strontium isotope composition, and trace element analysis. In conclusion, the combination of these four signatures is sufficient to distinguish the different origins among these studied UOCs.

and nuclear chemistry↗
DOE OSTI2025

Interlaboratory comparison of secondary ion mass spectrometry analysis results from the 7th international technical nuclear forensics working group collaborative material exercise

A review and interlaboratory comparison of secondary ion mass spectrometry (SIMS) data obtained by laboratories participating in the International Technical Nuclear Forensics Working Group (ITWG) 7th Collaborative Material Exercise (CMX-7) has been conducted. The analyzed materials were two uranium compounds in powder form and two pieces of uranium metal. The instruments used in this comparison were a small-geometry (SG) SIMS, CAMECA IMS 7f from the Research Centre Rez, and a large-geometry (LG) SIMS, CAMECA IMS 1280 from Los Alamos National Laboratory. Despite the differences in instruments and analytical procedures, e.g., sample preparation, SIMS setups, and data post-processing, there was good agreement for the 234 U/ 238 U, 235 U/ 238 U, and 236 U/ 238 U ratios in the analyzed materials. The main difference was in the precision, which was, as expected, higher for the LG-SIMS. In addition, a comparison between the laboratories was also made for the image processing algorithms applied to raw data acquired in automated particle measurement (APM) mode. In conclusion, the result of this comparison has led to identification of best practices for setting up parameters of the APM software.

and nuclear chemistry↗
DOE OSTI2023

Evaluation of pre-training large language models on leadership-class supercomputers

Large language models (LLMs) have arisen rapidly to the center stage of artificial intelligence as the foundation models applicable to many downstream learning tasks. However, how to effectively build, train, and serve such models for many high-stake and first-principle-based scientific use cases are both of great interests and of great challenges. Moreover, pre-training LLMs with billions or even trillions of parameters can be prohibitively expensive not just for academic institutions, but also for well-funded industrial and government labs. Furthermore, the energy cost and the environmental impact of developing LLMs must be kept in mind. Here, in this work, we conduct a first-of-its-kind performance analysis to understand the time and energy cost of pre-training LLMs on the Department of Energy (DOE)’s leadership-class supercomputers. Employing state-of-the-art distributed training techniques, we evaluate the computational performance of various parallelization approaches at scale for a range of model sizes, and establish a projection model for the cost of full training. Our findings provide baseline results, best practices, and heuristics for pre-training such large models that should be valuable to HPC community at large. We also offer insights and optimization strategies for using the first exascale computing system, Frontier, to train models of the size of GPT-3 and beyond.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Pathways to commercial building plug and process load efficiency and control

Abstract To accomplish net-zero carbon emissions in the built environment by 2050, we must equitably decarbonize commercial buildings, including reducing plug and process loads (PPLs). PPLs are plug-in or hardwired electric and gas loads that are not associated with major building end uses like lighting and HVAC. Research shows PPL energy reduction strategies and control technologies have the potential to save energy. But even when implemented, these savings have rarely been achieved and there has not been widespread uptake in U.S. commercial buildings. We investigate why these technologies and strategies have not seen widespread adoption and identify behavior and technology pathways to increase PPL reduction in U.S. commercial buildings. We examined behaviors of commercial building stakeholders through 44 interviews and cross-referenced qualitative analysis findings with in-depth technical knowledge of existing PPL control technologies and reduction strategies. PPL control implementation must be paired with management strategies, such as occupant engagement and training, to achieve optimal savings, and best practices should be disseminated across the industry. We found that increasing access to cost and energy savings data will promote uptake of PPL control technologies and allow designers to better incorporate PPLs into building design. Improving access to funding for PPL energy efficiency projects and addressing the split-incentive problem will increase adoption of PPL efficiency and control. Code bodies should continue to include PPL monitoring and reduction measures in energy codes. Key building stakeholders, including cybersecurity and information technology teams, should be involved in PPL monitoring and reduction strategy processes for successful implementation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Resilience in an Age of Increasing Electrification

The purpose of this paper is to outline considerations of global electrification trends that include the resultant system-wide and nation-wide impacts. How we incorporate resilience into the electrification plans that transition a nation from conventional energy sources to secure clean energy sources can impact the success of those transitions. Electrification of energy systems has the potential to impact power system planning, emissions, and security; however, little research has been done on comprehensive solutions for incorporating resilience into the electrification process. Research has been conducted on aspects of the energy system and electrification, but not holistically across disciplines and related to the interdependencies of different components of the grid system. This gap in research provides an opportunity for more analysis and a collection of best practices to incorporate resilience into electrification plans. Although clean energy is the goal of an increasing number of nations worldwide, there are many considerations in designing clean energy transitions and increased electrification. Resilience must be factored into clean energy transitions from planning, market design, and policies to modernized grid structures and new, location-specific dispersed energy and energy storage technologies.

clean energy↗
DOE OSTI2020

Design for Recycling Principles Applicable to Selected Clean Energy Technologies: Crystalline-Silicon Photovoltaic Modules, Electric Vehicle Batteries, and Wind Turbine Blades

Abstract The global growth of clean energy technology deployment will be followed by parallel growth in end-of-life (EOL) products, bringing both challenges and opportunities. Cumulatively, by 2050, estimates project 78 million tonnes of raw materials embodied in the mass of EOL photovoltaic (PV) modules, 12 billion tonnes of wind turbine blades, and by 2030, 11 million tonnes of lithium-ion batteries. Owing partly to concern that the projected growth of these technologies could become constrained by raw material availability, processes for recycling them at EOL continue to be developed. However, none of these technologies are typically designed with recycling in mind, and all of them present challenges to efficient recycling. This article synthesizes and extends design for recycling (DfR) principles based on a review of published industrial and academic best practices as well as consultation with experts in the field. Specific principles developed herein apply to crystalline-silicon PV modules, batteries like those used in electric vehicles, and wind turbine blades, while a set of broader principles applies to all three of these technologies and potentially others. These principles are meant to be useful for stakeholders—such as research and development managers, analysts, and policymakers—in informing and promoting decisions that facilitate DfR and, ultimately, increase recycling rates as a way to enhance the circularity of the clean energy economy. The article also discusses some commercial implications of DfR. Graphical Abstract

36 MATERIALS SCIENCE↗
DOE OSTI2022

How deep to dig: effects of web-scraping search depth on hyperlink network analysis of environmental stewardship organizations

Abstract Social network analysis (SNA) tools and concepts are essential for addressing many environmental management and sustainability issues. One method to gather SNA data is to scrape them from environmental organizations’ websites. Web-based research can provide important opportunities to understand environmental governance and policy networks while potentially reducing costs and time when compared to traditional survey and interview methods. A key parameter is ‘search depth,’ i.e., how many connected pages within a website to search for information. Existing research uses a variety of depths and no best practices exist, undermining research quality and case study comparability. We therefore analyze how search depth affects SNA data collection among environmental organizations, if results vary when organizations have different objectives, and how search depth affects social network structure. We find that scraping to a depth of three captures the majority of relevant network data regardless of an organization’s focus. Stakeholder identification (i.e., who is in the network) may require less scraping, but this might under-represent network structure (i.e., who is connected). We also discuss how scraping web-pages of local programs of larger organizations may lead to uncertain results and how our work can combine with mixed methods approaches.

Sayles, Jesse S. (ORCID:0000000218378920)↗
DOE OSTI2021

Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V

Metal additive manufacturing (AM) enables customizable, on-demand parts, allowing for new designs and improved engineering performance. Yet, the ability to control AM metal alloy microstructures (i.e., grain morphology, crystallographic texture, and phase content) is lacking. Furthermore, this work performs corroborative neutron diffraction and large-scale electron backscatter diffraction (EBSD) measurements to assess crystallographic texture in electron beam melted (EBM) Ti-6Al-4V as a function of scan strategy and build height. Texture components for one raster and two spot melt scan strategies were evaluated using a triclinic specimen symmetry to capture all possible texture components, which were found to be considerably different than previously reported values from studies employing orthotropic specimen symmetry. This finding highlights the importance of a standard method and best practice for assessing textures produced by AM.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of digital fringe projection operational parameters on detecting powder bed defects in additive manufacturing

Additive manufacturing is a technology transforming traditional production timelines. Specifically, metal additive manufacturing (MAM) has been increasingly adopted by a variety of industries, not only to prototype, but also to fulfill full production scale applications with much lower lead times. Like any maturing manufacturing technology, developments in verifying and validating processes are necessary to support continuous growth. Due to the complex nature of MAM, part quality and repeatability remain integral challenges that inhibit further adoption of MAM for critical component production. In this study, we present data taken from a developing in-process monitoring system designed to measure and detect powder bed defects (PBDs) in powder bed fusion MAM systems using surface height maps created with structured light illumination. We showcase the feasibility of the monitoring technique for in-process implementation by detecting streak PBDs with varying severities (height, width) created in a lab environment. We present results of powder bed measurements for varying experimental parameters of the structured light system such as illumination angle, illumination pattern, and number of illuminations. We also present an expression used to determine experimental height noise based on input parameters for PBD detection based on the instrument transfer function of the structured light monitoring system for arbitrary pixel intensity noise contributions. In conclusion, with the results of PBD detection across multiple experimental measurement parameters, we provide a best practices approach to in-process implementation of the monitoring system in powder bed fusion manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An evaluation of methodology to determine algal genome completeness

The advancement of sequencing technologies has resulted in a rapid expansion of genome sequencing. One challenge in processing and analyzing this abundance of genomics data is development and application of tools to accurately assess the quality of novel genomes. The quality of a given genome assembly is commonly assessed using the presence of conserved orthologs. However, the applicability and accuracy of identifying conserved orthologs applied to algal genome assemblies, which are uniquely diverse, is unclear. Here, in this study, we analyze the utility of a genome content assessment tool, Benchmarking Universal Single-Copy Orthologs (BUSCO), to evaluate algal genome assembly completeness. We find that Chlorophyta and Stramenopile BUSCO databases are effective tools to analyze genome completeness of these lineages. For other lineages, the Eukaryota database should be utilized until additional lineage-specific databases are developed. Based on these results, suggested best practices for current usage and necessary future improvements are provided.

59 BASIC BIOLOGICAL SCIENCES↗