Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “barriers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Low-cost thermal/environmental barrier coatings: A first-principles study

Development of low-cost advanced thermal/environmental barrier coating (T/EBC) materials with acceptable thermal and mechanical properties is essential for safeguarding ceramic composites substrate against thermal and chemical degradation, thereby enhancing the efficiency of components in the high-temperature section of gas turbine engines. To this end, here we employed density functional theory-based approaches to predict the thermodynamic, mechanical, and thermal properties of rare earth disilicates based on abundant rare earth elements, namely La 2 Si 2 O 7 and Ce 2 Si 2 O 7 , as potential alternatives to the current-state-of-the-art ytterbium disilicate EBCs that uses expensive and scarce element Yb. The present study predicts that G-phase Ce 2 Si 2 O 7 has an ultralow thermal conductivity (0.26 W/m/K at 1500 K) and the apparent bulk coefficient of thermal expansion (ABCTE) (≈6.9x10 -6 K -1 ) slightly higher than SiC, demonstrating great potential as low-cost high-performance T/EBC. However, La 2 Si 2 O 7 and Ce 2 Si 2 O 7 undergo an A- to G-phase polymorphic transition at around 1470 K, resulting in significant changes to crystal structure and lattice parameters, and accordingly CTE and lattice thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of mixed conducting Pr 0.1 Gd 0.1 Ce 0.8 O 1.9-δ barrier layer on the promotion of SOFC performance

The cathode activity in a solid oxide fuel cell can be promoted by introducing various catalysts to reduce its polarization resistance towards oxygen reduction, and thus improve cell performance. Here, in this work, the La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) cathode surface is modified by the infiltration of Pr 6 O 11 and the power density at 0.8 V and 750 °C is improved by 21%. Moreover, by replacing the traditional barrier layer Gd 0.2 Ce 0.8 O 1.9 with mixed conducting Pr 0.1 Gd 0.1 Ce 0.8 O 1.9 (PGCO), the power density increases by 38%. The ohmic resistance is dramatically reduced by applying the PGCO interlayer. The distribution of relaxation time was used to analyze the mechanism for which the polarization resistance was decreased, attributing to the mixed conduction nature in PrO x . An increase of power density, ~0.358 W/cm 2 (71%) at 0.8 V, is achieved with the implementation of both surface modification and buffer layer engineering.

08 HYDROGEN↗
DOE OSTI2021

Focused Ultrasound-Mediated Blood-Brain Barrier Opening Increases Delivery and Efficacy of Etoposide for Glioblastoma Treatment

Glioblastoma (GBM) is a devastating disease. With the current treatment of surgery followed by chemoradiation, outcomes remain poor, with median survival of only 15 months and a 5-year survival rate of 6.8%. A challenge in treating GBM is the heterogeneous integrity of the blood-brain barrier (BBB), which limits the bioavailability of systemic therapies to the brain. There is a growing interest in enhancing drug delivery by opening the BBB with the use of focused ultrasound (FUS). We hypothesize that an FUS-mediated BBB opening can enhance the delivery of etoposide for a therapeutic benefit in GBM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Environmental barrier coatings on enhanced roughness SiC: Effect of plasma spraying conditions on properties and performance

Environmental barrier coatings for SiC/SiC composites are limited by the melting temperature of the Si bond coating near 1414°C. Systems without a bond coating may be required for future turbine applications where material temperatures go beyond 1350 °C. Here, enhanced roughness SiC substrates were developed to assess coating adhesion without the bond coating. Two EBCs with different YbMS/YbDS ratios were produced via modified plasma spraying parameters. Coating microstructure, thermal expansion, and modulus were measured for comparison of coating properties. Cyclic steam exposures at 1350°C were performed to assess oxidation resistance. The EBC with increased concentration of Yb 2 SiO 5 secondary phase displayed a higher CTE, which is typically expected to decrease adhesion lifetimes due to an increase in stress upon thermal cycling. Yet, the EBC chemistry with increased Yb 2 SiO 5 concentration was able to experience longer cycling times prior to coating delamination, likely due to interface interactions with the substrate and the thermally grown oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Simultaneously improving device efficiency and stability is the most important issue in perovskite solar cell (PSC) research. Here, we strategically introduce a multi-functional interface layer (MFIL) with integrated roles of: (1) electron transport, (2) moisture barrier, (3) near-infrared photocurrent enhancement, (4) trap passivation, and (5) ion migration suppression to enhance the device performance. The narrow-band-gap non-fullerene acceptor, Y6, was screened out to replace the most commonly used PCBM in the inverted PSCs. A significantly improved power conversion efficiency of 21.0% was achieved, along with a remarkable stability (up to 1,700 h) without encapsulation under various external stimuli (light, heat, and moisture). Furthermore, systematic studies of the molecular orientation or passivation and the charge carrier dynamics at the interface between perovskite and MFIL were presented. These results offer deep insights for designing advanced interlayers and establish the correlations between molecular orientation, interface molecular bonding, trap state density, non-radiation recombination, and the device performance.

14 SOLAR ENERGY↗
DOE OSTI2025

Impact of pairing and neutron-excess on suppression of the above-barrier fusion cross-section in 19 O + 12 C

Fusion excitation functions for 19 O and 19 F + 12 C were simultaneously measured along with 20 O + 12 C using the active-target detector MuSIC@Indiana. Examination of the cross-section just above the barrier reveals a significant suppression of fusion for the 19 O + 12 C system starting at E 12 MeV. This suppression is not simply due to the reduced binding of the unpaired neutron in 19 O as 17 O + 12 C does not exhibit the same sharp suppression of the fusion cross-section. Multiple mean-field models are used as a reference to understand the measured fusion excitation functions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Essential barrier height and a probabilistic approach in characterizing potential landscape

In this work we propose a probabilistic approach to investigate the shape of landscapes of multi-dimensional potential functions. Under a suitable coupling scheme, two copies of the overdamped Langevin dynamics associated with the potential function are coupled, and the coupling times are collected. Assuming a set of intuitive yet technically challenging conditions on the coupling scheme, it is shown that the tail distributions of the coupling times exhibit qualitatively different dependencies on the noise magnitude for single-well versus multi-well potential functions. More specifically, for convex single-well potentials, the negative tail exponent of the coupling time distribution is uniformly bounded away from zero by the convexity parameter and is independent of the noise magnitude. In contrast, for multi-well potentials, the negative tail exponent decreases exponentially as the noise vanishes, with the decay rate governed by the essential barrier height, a quantity introduced in this paper to characterize the non-convex nature of the potential function. Numerical investigations are conducted for a variety of examples, including the Rosenbrock function, interacting particle systems, and loss functions arising in artificial neural networks. These examples not only illustrate the theoretical results in various contexts but also provide crucial numerical validation of the conjectured assumptions, which are essential to the theoretical analysis yet lie beyond the reach of standard technical tools.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Porous architecture and thermal properties of thermal barrier coatings deposited by suspension plasma spray

Besides the intrinsic low heat transfer capability of material, the thermal insulation property of thermal barrier coatings (TBCs) also relies on their microstructures. For better understanding the relationship between process parameters, porous architecture, and thermal properties of coatings, YSZ coatings were firstly manufactured by suspension plasma spray (SPS). Afterwards their total porosities were characterized by using the technique of X-ray transmission, the nano/submicro pores in those coatings were detected with Ultra-Small Angle X-ray Scattering (USAXS), and the thermal properties of coatings were measured using the laser flash method. The results indicated that: i) the porous architecture of SPS coatings can be tailored by adapting process parameters. ii) increasing total porosity is an effective means for reducing the heat transfer capability of SPS coatings. iii) nano/submicro pores have higher influence sensitivity on thermal properties than that of larger pores. Increasing the content of nano-submicro pores is therefore more effective for improving the thermal insulation property of SPS coatings. The potential of SPS technique for fabricating TBCs was discussed as well.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantifying thermal barrier coating delamination through luminescence modeling

Thermal barrier coatings (TBCs) are widely used in the hot sections of gas turbine systems as they are remarkably efficient in insulating the underlying superalloys, leading to higher operating temperatures and therefore enhancing the performance of the engines. However, this benefit is only possible if the integrity of the TBC under aggressive thermo-mechanical environments is ensured. Delamination is a common but hard to detect failure mode. We present, in this work, supported by experimentation, the implementation of a modeling approach applying the Kubelka-Munk theory to provide numerical quantification of luminescence contrast and intensity due to top coat delamination in TBCs. The method relies on the drastic change in reflectivity when a delamination forms, exploiting it for high-contrast luminescence mapping. Two distinct TBC configurations containing an erbium-doped yttria-stabilized zirconia (YSZ:Er 3+ ) layer for delamination sensing were used to validate this model. A delamination zone induced by Rockwell indentation was successfully tracked by measuring an increase of the intensity of the erbium emission line at 562 nm. Luminescence-based methods for delamination detection can provide a revolutionary non-invasive technique, with potential for both off-line and on-line engine monitoring.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Impact damage of narrow silicon carbide (SiC) ceramics with and without environmental barrier coatings (EBCs) by various foreign object debris (FOD) simulants

The leading and trailing edges of turbine airfoils are highly susceptible to impact by foreign object debris (FOD) entrained in the gas stream of turbine engines. In this study, a narrow specimen geometry is implemented to study the FOD impact behavior of low curvature airfoil edges. Silicon carbide (SiC) ceramic specimens with and without an environmental barrier coating (EBC) are used as target materials. The EBC consists of an air plasma sprayed mullite topcoat (~ 166 µm) and silicon bond coat (~ 58 µm). Spherical (∅ 1.5 mm) FOD simulants of silicon nitride (Si3N4), partially stabilized zirconia (PSZ), and steel are used as impactors. Additionally, a modified gas gun is used to generate impact damage at normal incidence and velocities ranging between 300 to 400 m/s. In situ phase contrast X-ray radiographs, which render 2D representations of the internal transient damage, are captured during the impact experiments. Impactor hardness and toughness are found to primarily influence damage in the coating. Relative to wide specimens, the narrow specimens experience a greater level of cracking and this is postulated to result from reduced self-confinement. Irrespective of specimen geometry and impactor material type, limited cracking (i.e. enhanced shielding) is observed for the coated condition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Durability of plasma sprayed Thermal Barrier Coatings with controlled properties part Ⅱ: Effects of geometrical curvature

The present investigation elucidates the effects of substrate curvature on the durability of Air Plasma Sprayed (APS) Thermal Barrier Coatings (TBCs). Traditionally, planar disk specimens are utilized in Furnace Cycle Testing (FCT). In most cases, delamination is initiated at the disk's free edge and then propagates along the TBC-bond coat interface. However, in turbine components (e.g., blades/vanes), they lack significant free edges and the coatings are deposited on non-flat surfaces of varying radii of curvature. These geometrical discrepancies imply significant differences in the stress states as compared to planar disk specimens. Therefore, the part geometry inevitably affects the TBC failure mechanisms in the turbine system, and consequently influences TBC durability. Nevertheless, these effects have not been fully explored in the past, despite the anecdotal knowledge which suggests the leading edge of turbine blades to be one of the most common failure/spallation locations. Here in this study, representative TBC systems were deposited onto superalloy disks with flat substrate and rods with curved substrate. The experimental results from FCT suggest TBC durability on rods is significantly lower than when sprayed on disks. Furthermore, the durability of TBCs on rods appears to increase with higher porosity, which is contradictory to reported trends for TBCs on disks. In addition, the effects of various bond coats are not consistent with those observed in disks. To clarify the underlying effects of curved geometries, detailed stress analyses were performed. They revealed a state of thermal stresses which is unique to curved geometries. It was found that TBC on rods experience tensile radial stresses as well as tensile hoop stresses during the cooling. These stresses result in a complex interplay in failure processes in rods, which explains the different observed trends in the durability from those obtained with disks.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal Barrier Coatings Overview: Design, Manufacturing, and Applications in High-Temperature Industries

Today’s competitive world economy is creating an indispensable demand for increased efficiency of engineering components that operate in harsh environments (i.e., very high-temperature, corrosive, or neutron irradiation environments), for applications in the energy, automotive, aerospace, electronics, and power industries. Increased research is being done on thermal barrier coatings (TBCs) for protecting such components, since the versatility of manufacturing techniques and the scale of deployment result in increased life, economics, performance, and durability. This review focuses on the advances that led to using TBCs for component life extension and, more recently, as an integral part of advanced component design for high-temperature and other types of harsh environments, such as those found in nuclear-related applications. Furthermore, factors that led to state-of-the-art advanced coating-fabrication techniques [e.g., electron-beam physical vapor deposition (EB-PVD), plasma spray deposition, and electrophoretically deposited TBCs, as well as functionally graded material (FGM) manufacturing] have also been emphasized in current coating R&D. This review explores the current state of TBCs, i.e., the latest advances regarding their fabrication and performance, associated challenges, and recommendations for their future use in aerospace, nuclear, high-temperature, or otherwise harsh environments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Advanced thermal/environmental barrier coatings of high-entropy rare earth disilicates tuned by strong anharmonicity of Eu 2 Si 2 O 7

Advancing thermal/environmental barrier coating (TEBC) materials with integrated thermal-mechanical functions is paramount for safeguarding SiC-based ceramic matrix composites (CMCs) in high-efficiency gas turbines. Herein, we employ a synergistic approach, combining density functional theory (DFT) methods and combinatorial chemistry techniques, to design high-performance and low-cost RE 2 Si 2 O 7 (RE = rare earth elements) TEBC materials tailored for enhanced compatibility with SiC-based CMCs. Expanding on phase stability of alloying pure RE 2 Si 2 O 7 , the investigation extends to the mechanical and thermal properties of solid solution systems, including Er 1/2 Y 3/4 Yb 3/4 Si 2 O 7 , Gd 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 , and Eu 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 . The solid solution systems exhibit a major reduction in lattice thermal conductivity relative to their pure counterparts, achieving ultralow values of 0.25 to 0.39 W m −1 K −1 at 1500 K. Furthermore, the coefficients of thermal expansion (CTE) of these solid solutions are precisely tuned within the desired range for SiC (4.4 to 5.5 × 10 −6 K −1 ), while maintaining good mechanical properties. Here, in particular, the addition of Eu 2 Si 2 O 7 demonstrates to be an important variable to the tuning of CTE and lattice thermal conductivity by leveraging its strong anharmonicity, presenting a pioneering avenue for fine-tuning material properties. In summary, this research not only identifies promising TEBC materials with superior thermal properties, but also introduces a valuable computational material design methodology for the rapid discovery of complex materials for harsh environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Defect characterization and charge transport measurements in high-resolution Ni/n-4H-SiC Schottky barrier radiation detectors fabricated on 250 μ m epitaxial layers

Advances in the growth processes of 4H-SiC epitaxial layers have led to the continued expansion of epilayer thickness, allowing for the detection of more penetrative radioactive particles. In this work, we report the fabrication and characterization of high-resolution Schottky barrier radiation detectors on 250 μm thick n-type 4H-SiC epitaxial layers, the highest reported thickness to date. Several 8 × 8 mm 2 detectors were fabricated from a diced 100 mm diameter 4H-SiC epitaxial wafer grown on a conductive 4H-SiC substrate with a mean micropipe density of 0.11 cm -2 From the Mott–Schottky plots, the effective doping concentration was found to be in the range (0.95–1.85) × 10 14 cm -3 , implying that full depletion could be achieved at ~5.7 kV (0.5 MV/cm at the interface). The current-voltage characteristics demonstrated consistently low leakage current densities of 1–3 nA/cm 2 at a reverse bias of -800 V. This resulted in the pulse-height spectra generated using a 241Am alpha source (5486 keV) manifesting an energy resolution of less than 0.5% full width at half maximum (FWHM) for all the detectors at -200 V. The charge collection efficiencies (CCEs) were measured to be 98–99% with no discernable correlation to the energy resolution. A drift-diffusion model fit to the variation of CCE as a function of bias voltage, revealed a minority carrier diffusion length of ~10 μm. Deep level transient spectroscopy measurements on the best resolution detector revealed that the excellent performance was the result of having ultralow concentrations of the order of 1011 cm-3 lifetime limiting defects—Z 1/2 and EH 6/7 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Oxygenates production in a microfluidic dielectric barrier discharge device sustained in Ar/CH 4 /O 2

Reforming of methane (CH 4 ) is a process to produce syngas (CO/H 2 ) and other value-added chemicals including oxygenates such as methanol (CH 3 OH). Atmospheric pressure plasmas have the potential to be more energy efficient than traditional reforming methods as value-added chemicals can be synthesized directly in the plasma without requiring an additional step. In this paper, we discuss the results from a computational investigation of the formation of oxygenates by CH 4 oxidation in the presence of Ar, including CH 3 OH and CH 2 O, in a nanosecond pulsed dielectric barrier discharge. The plasma is formed in a microfluidic channel whose small dimensions are ideal for plasma formation at atmospheric pressure. The production and consumption mechanisms of dominant radicals and long-lived species are discussed in detail for the base case conditions of Ar/CH 4 /O 2 = 50/25/25. CH 3 OH is produced primarily by CH 3 O reacting with CH 3 O and CH 3 O 2 reacting with OH, while CH 2 O formation relies on reactions involving CH 3 O and CH 3 . The most abundant oxygenate formed is CO (produced by H abstraction from CHO). However, the greenhouse gas CO 2 is also formed as a by-product. The effects of gas mixture are examined to maximize the CH 3 OH and CH 2 O densities while decreasing the CO 2 density. Increasing the Ar percentage from 0% to 95% decreased the CH 3 OH and CH 2 O densities. At low Ar percentages, this is due to an increase in consumption of CH 3 OH and CH 2 O, while at high Ar percentages (>40% Ar), the production of CH 3 OH and CH 2 O is decreased. However, both CO and CO 2 reached peak densities at 70%–90% Ar. Changing the CH 4 /O 2 ratio while keeping 50% Ar in the discharge led to increased CH 3 OH and CH 2 O production, reaching peak densities at 35%–40% CH 4 . The CO and CO 2 densities decreased beyond 20% CH 4 , indicating that a CH 4 rich discharge is ideal for forming the desired oxygenates.

03 NATURAL GAS↗
DOE OSTI2025

Off-state magnetoresistance in long-channel germanium Schottky-barrier MOSFETs

An increasing magnetic field perpendicular to an undoped semiconductor surface at low temperature is known to strengthen the binding of localized electrons to stationary ions, as the wavefunction's tails evolve from exponential to Gaussian. It is also known that application of a high bias voltage to a depleted semiconductor can liberate bound charge and induce a large drop in electrical resistance. We connect these established results to experimental electrical transport measurements on off-state germanium Schottky-barrier metal–oxide–semiconductor field-effect transistor (MOSFETs) with an aluminum oxide insulating dielectric and platinum germanide contacts. We make measurements at the three distinct orientations of the magnetic field with respect to the substrate and the current. At 6 K, we observe sharp attenuation of current by more than 2 orders of magnitude, within 60 mT, at a crossover magnetic field perpendicular to the substrate. A 1 T magnetic field attenuates the current by more than 4 orders of magnitude. The strength of the attenuation and the value of the crossover field are controlled by both the gate–source and drain–source voltages. The attenuation is much weaker when the magnetic field is parallel to the current. Finally, we orient the magnetic field parallel to the substrate, but perpendicular to the current, allowing us to distinguish charge hopping at the oxide interface from charge hopping in the bulk. In conclusion, this large off-state magnetoresistance can be exploited for cryogenic magnetic- and photo-detection, and for high-bias, low-leakage MOSFETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Plasma-assisted catalysis for ammonia synthesis in a dielectric barrier discharge reactor: key surface reaction steps and potential causes of low energy yield

Ammonia synthesis experiments were carried out in a coaxial dielectric barrier discharge (DBD) reactor packed with several different supports and metal catalysts. There was a marked increase in the reaction rate, over that obtained in an empty DBD plasma reactor, upon introduction of a packed bed of γ-Al 2 O 3 , Ru/γ-Al 2 O 3 , or SiO 2 particles. The difference in the reaction rates over γ-Al 2 O 3 and Ru/γ-Al 2 O 3 was minimal. Complementary zero-dimensional plasma kinetic model analysis was also performed using inputs from experimental data. This kinetic analysis allowed for gas phase reactions, Eley–Rideal (E–R) reactions, and direct adsorption of radical species on the γ-Al 2 O 3 surface. On the metal surface, dissociative adsorption of N 2 and H 2 , and Langmuir–Hinshelwood reactions were also included. This analysis revealed that, under the conditions of our experiments, ammonia synthesis proceeds principally by the formation of reactive radicals in the gas phase, which then adsorb and participate in E–R reactions on both the metal and support material surfaces. Furthermore, this finding illustrates a challenge for substantially increasing the energy yield for plasma-assisted ammonia synthesis in typical DBD reactors containing packed catalyst beads.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Examination of OH and H 2 O 2 production by uniform and non-uniform modes of dielectric barrier discharge in He/air mixture

In this work we have carried out a parametrical study of hydroxyl radical (OH) generation in nanosecond dielectric barrier discharge (DBD) in He/air mixture using a laser-induced fluorescence approach. Specifically, the foci of the study are the investigation of differences between uniform and non-uniform modes of the discharges and the difference in production of OH and H 2 O 2 Nanosecond-time scale imaging of the discharge shows transition from streamer to diffuse mode when applied electric field to the discharge gap approaches ~90 kV cm –1 . The results show that both OH production in the gas phase and downstream H 2 O 2 delivery rates to liquid depend on the discharge mode operation and are respectively 30% and 3 times higher for the non-uniform DBD compared to the diffuse discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗