Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “average atom”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Densities and temperatures in the polar thermosphere

The atomic oxygen density at 120 km, the 630 nm airglow temperature, the helium density at 300 km and the molecular nitrogen density near 400 km were examined as functions of geomagnetic latitude, geomagnetic time, season and magnetic activity level. The long-term averages of these quantities were examined so as to provide a baseline of these thermospheric parameters from which future studies may be made for comparison. The hours around magnetic noon are characterized by low temperatures, high 0 and He densities, and median nitrogen densities. The pre-midnight hours exhibit high temperatures, high He density, low nitrogen density and median 0 densities. The post-midnight sector shows low 0 and He densities, median temperatures and high nitrogen densities. These results are compared to recent models and observations and are discussed with respect to their causes due to divergence of the wind field and energy deposition in the thermosphere.

Gardner, L. J.↗
NASA NTRS1984

An experimental investigation of cusped magnetic field discharge chambers

Several features of a proposed model of ion thruster performance are tested experimentally. The experiment conducted demonstrates the effects of variation in thruster operating parameters on the average plasma ion energy costs and extracted ion fractions of various ring and line cusp discharge chambers. The results indicate that the model correctly predicts the variation in the plasma ion energy cost resulting from changes in: propellant gas, grid transparency to neutral atoms, beam extraction area, and discharge voltage. In addition, the model is shown to be applicable to both ring and line cusp designs. Measurements of the extracted ion fraction indicate that this parameter tends to increase with decreasing discharge voltage and is generally higher for operation with argon as opposed to krypton propellant. Results suggest that to use the proposed thruster performance model as an aid in thruster design the performance may be described in terms of four thruster configuration dependent constants and two operating parameters.

Brophy, J. R.↗
NASA NTRS1995

Composition of interstellar clouds in the disk and halo. 3: HD 149881

The spectrum of HD 149881, a halo star 1300 pc above the Galactic plane, has been analyzed, based on high-resolution GHRS data from Hubble Space Telescope (HST) together with 21 cm emission observations and profiles of Na I and Ca II features. The results reveal 11 absorption components, of which nine are produced in H I regions, with log N(H(sup 0) in each region mostly approximately 19.5; one component clearly originates in an H II region. Detailed column densities show that (D(Zn)), the absolute value of the depletion D, for Zn, like that for S, does not much exceed 0.1 dex. With Zn used as a standard of reference, D(Fe) varies from -1.1 to -0.6 dex; (D(Cr)) and (D(Mn)) average less than (D(Fe)) by about 0.1 and 0.2 dex, respectively, with dispersions of about 0.1 dex in this difference. As in Papers I and II, the measured D(Si) is consistent with a 2 to 1 ratio of Fe to Si atoms in grains. The kinetic temperature is these H I regions varies widely among components. Maximum temperatures, found from the widths of 21 cm emission components, range from about 100 to 10,000 K, while actual temperatures, found by comparing the H I widths with the b-values for the ultraviolet features, are about equal or less than 1000 K for six of the H I components. In contrast, toward the halo star HD 93521, temperatures of about 6000 K were found for most of the components. With use of these HD 149881 temperatures, values of n(sub e) were obtained from the ionization equilibrium of Ca(+) and also of Na(0). These values range over an order of magnitude, from about 4.9 x 10(exp -2) to 1.3 x 10(exp -3)/cu cm, systematically smaller (but also less certain) than in HD 93521. For the low values of n(sub e) found in the coldest components, the electrons can be accounted for by ionization of C atoms, if n(sub H) approximately equals 10/cu cm. For the warmest component, an ionization probability of beta(H(sup 0)) approximately equals 3 x 10(exp -15)/s is required, with lower values for other H I components.

Spitzer, Lyman, Jr.↗
NASA NTRS2001

High Coverages of Hydrogen on a (10,0) Carbon Nanotube

The binding energy of H to a (10,0) carbon nanotube is calculated at 24, 50, and 100% coverage. Several different bonding configurations are considered for the 50% coverage case. Using the ONIOM (our own n-layered integrated molecular orbital and molecular mechanics) approach, the average C-H bond energy for the most stable 50% coverage and for the 100% coverage are 57.3 and 38.6 kcal/mol, respectively. Considering the size of the bond energy of H2, these values suggest that it will be difficult to achieve 100% atomic H coverage on a (10,0) nanotube.

Bauschlicher, Charles W., Jr.↗
NASA NTRS2024

A Break In the Size-Stellar Mass Relation: Evidence for Quenching and Feedback in Dwarf Galaxies

Mapping stars and gas in nearby galaxies is fundamental for understanding their growth and the impact of their environment. This issue is addressed by comparing the stellar ‘edges’ of galaxies D stellar, defined as the outermost diameter where in situ star formation significantly drops, with the gaseous distribution parameterized by the neutral atomic hydrogen diameter measured at 1M⊙/pc2,DHI. By sampling a broad HI mass range 105M⊙< MHI<1011M⊙, we find several dwarf galaxies withMHI<109M⊙from the field and Fornax Cluster which are distinguished by D stellar>> DHI. For the cluster dwarfs, the average HI surface density near D stellar is∼0.3M⊙/pc2, reflecting the impact of quenching and outside-in gas removal from ram pressure and tidal interactions. In comparison, D stellar/DHI ranges between 0.5–2 in dwarf field galaxies, consistent with the expectations from stellar feedback. Only more massive disk galaxies in the field can thus be characterized by the common assumption that D stellar≲DHI. We discover a break in the D stellar−M⋆relation atm break∼4×108M⊙that potentially differentiates the low mass regime where the influence of stellar feedback and environmental processes more prominently regulates the sizes of nearby galaxies. Our results highlight the importance of combining deep optical and HI imaging for understanding galaxy evolution.

Scaling relations↗
DOE OSTI2020

Helium Bubble Growth and Retention Characteristics in Aging Palladium Tritide

The helium-related characteristics of aged palladium tritide, including tritium loss, the formation of He bubbles from tritium decay-induced He atoms, and He thermal desorption behavior are computed using a continuum model of bubble evolution that incorporates the log-normal bubble spacing distribution deduced from 3 He nuclear magnetic resonance (NMR) measurements. This spacing distribution produces significant differences between mean (expectation) values of the bubble size and pressure and the average (median) values of these aging characteristics obtained by a previous calculation. The new calculations find much of the He is retained in a large quantity of smaller bubbles with higher bubble pressures, improving the overall stability of the bubbles and extending the age of He retention. By contrast, the integrated tritide material characteristics of swelling and tritium pressure are found relatively insensitive to details of the bubble spacing distribution. Inter-bubble fracture is predicted to begin with small, closely-spaced bubbles and progress to include larger bubbles near the onset of rapid He release. The critical concentration for this onset increases almost linearly with material tensile strength and decreases with shear modulus. Release of He from the aging solid is modeled as a growing network of fractured inter-bubble ligaments. For small particle or small grain material, the physical size of the fracture cluster, relative to the material dimensions, becomes important. In contrast with normal aging, inter-bubble fracture occurring during thermal desorption appears to begin with large, widely-spaced bubbles, indicating elevated temperature techniques may be of limited use for evaluating development of the bubble fracture network.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Theory and application of the vector pair correlation function for real-space crystallographic analysis of order/disorder correlations from STEM images

Deviations of local structure and chemistry from the average crystalline unit cell are increasingly recognized to have a significant influence on the properties of many technologically important materials. Here, we present the vector pair correlation function (vPCF) as a new real-space crystallographic analysis method, which can be applied to atomic-resolution scanning transmission electron microscopy (STEM) images to quantify and analyze structural order/disorder correlations. Our STEM-based vPCFs have several advantages over radial PCFs and/or 3D pair distribution functions from x-ray total scattering: vPCFs explicitly retain crystallographic orientation information, are spatially resolved, can be applied directly on a sublattice basis, and are suitable for any material that can be imaged with STEM. To show the utility of our approach, we measure partial vPCFs in Ba 5 SmSn 3 Nb 7 O 30 (BSSN), a tetragonal tungsten bronze (TTB) structured complex oxide. Many TTBs are known to be classical or relaxor ferroelectrics, and these properties have been correlated with the presence of superlattice ordering. BSSN, specifically, exhibits relaxor behavior and an incommensurate structural modulation. From the vPCF data, we observe that, of the cation sites, only the Ba (A2) sublattice is structurally modulated. We then infer the local modulation vector and reveal a marked anisotropy in its correlation length. Finally, short-range correlated polar displacements on the B2 cation sites are observed. This work introduces the vPCF as a powerful real-space crystallography technique, which enables direct, robust quantification of short-to-long range order on a sublattice-specific basis and is applicable to a wide range of complex material types.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Level shifts and inelastic electron scattering in dense plasmas

A completely quantum mechanical formalism has been developed to describe the high density plasma effects on fundamental atomic parameters. Both the bound and free electrons are treated by a method which in principle is similar to Hartree's self-consistent field method. The free plasma electrons' wavefunction is obtained from the Schroedinger equation with the effective potential representing the spherically averaged Coulomb interaction with bound and free electrons. Results are given for level shifts, coefficients of transition probabilities, and electron collision cross sections of Ne(9+) for temperatures of 200 and 500 eV for an electron density range of 1-6 x 10 to the 24th per cu cm.

Davis, J.↗
NASA NTRS1983

The development, performance, and potential application of the copper halide laser

The copper halide laser (CHL) is an efficient gas discharge laser that emits short pulses at two discrete wavelengths in the yellow and green spectral region. The laser pulse results from transitions in excited copper atoms. The CHL has produced pulses of up to 10 mJ in a double-pulsed mode at low repetition rates and has been operated at very high repetition rates (8 to over 35 kHz) in a continuously pulsed mode with a maximum average-power of 15 watts. In this paper, the development of the copper halide laser is reviewed along with a brief description of the copper laser operating principles. In the final section, a number of applications of the CHL are identified.

Pivirotto, T. J.↗
NASA NTRS1993

Observation of forbidden C II 158 micron emission from the diffuse interstellar medium at high Galactic latitude

We report the first detection of forbidden C II 158 micron line emission from the diffuse interstellar medium at high Galactic latitude. We have measured the integrated line intensity in a 36 arcmin field of view along a triangular scan path in a 5 x 20 deg region in Ursa Major using a rocket-borne, liquid-helium-cooled spectrophotometer. The scan included high-latitude infrared cirrus, molecular clouds, a bright external galaxy, M82, and the H I Hole, which is a region of uniquely low neutral hydrogen column density. Emission from forbidden C II is observed in all regions, and, in the absence of appreciable CO emission, it is well correlated with neutral hydrogen column density. We observe a forbidden C II gas cooling rate which varies from (1.18 +/- 0.4 to 3.25 +/- 0.8) x 10 exp -26 ergs/s/H atom. Regions with CO emission have enhanced forbidden C II line emission over that expected from the correlation with neutral hydrogen column density. We measure a line-to-continuum ratio which varies from 0.002 to 0.008 in comparison with the all-sky average of 0.0082 reported by FIRAS, which is heavily weighted toward the Galactic plane.

Bock, J. J.↗
NASA NTRS2019

Plasma environment effects on K lines of astrophysical interest II. Ionization potentials, K thresholds, radiative rates, and Auger widths in Ne- through He-like iron ions (Fe xvii – Fe xxv)

Aims. In the context of accretion disks around black holes, we estimate plasma-environment effects on the atomic parameters associated with the decay of K-vacancy states in highly charged iron ions, namely Fe XVII – Fe XXV. Methods. Within the relativistic multiconfiguration Dirac–Fock (MCDF) framework, the electron–nucleus and electron–electron plasma screenings were approximated with a time-averaged Debye–Hückel potential. Results. Modified ionization potentials, K thresholds, wavelengths, radiative emission rates, and Auger widths are reported for astrophysical plasmas characterized by electron temperatures and densities in the ranges 10^5 − 10^7 K and 10^18 − 10^22 per cu.cm, respectively. Conclusions. We conclude that the high-resolution microcalorimeters on board future X-ray missions such as XRISM and ATHENA are expected to be sensitive to the lowering of the iron K edge due to the extreme plasma conditions occurring in accretion disks around compact objects.

J. Deprince↗
DOE OSTI2020

Erosion and cathodic arc plasma of Nb–Al cathodes: composite versus intermetallic

Many properties of cathodic arcs from single-element cathodes show a correlation to the cohesive energy of the cathode material. For example, the burning voltage, the erosion rate, or, to a lesser extent, plasma properties like electron temperatures or average ion energy and charge states. For multi-element cathodes, various phases with different cohesive energies can initially be present in the cathode, or form due to arc exposure, complicating the evaluation of such correlations. To test the influence of morphology and phase composition of multi-element cathodes on cathodic arc properties, a Nb–Al cathode model system was used that includes: pure Nb and Al cathodes; intermetallic Nb 3 Al, Nb 2 Al and NbAl 3 cathodes; and three composite Nb–Al cathodes with atomic ratios corresponding to the stoichiometric ratios of the intermetallic phases. Pulsed cathodic arc plasmas from these cathodes were examined using a mass-per-charge and energy-per-charge analyzer, showing that charge-state-resolved ion energy distributions of plasmas from the intermetallic and corresponding composite cathodes are nearly identical. An examination of converted layers of eroded cathodes using x-ray diffraction and scanning electron microscopy indicates the formation of a surface layer with similar phase composition for intermetallic and their corresponding composite cathode types. The average arc voltages do not follow the trend of cohesive energies of Nb, Al and intermetallic Nb–Al phases, which have been calculated using density functional theory. Possible reasons for this effect are discussed based on the current knowledge of multi-element arc cathodes and their arc plasma available in literature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nanoscale serration characteristics of additively manufactured superalloys

Structural elements made of nickel-based superalloys usually operate at high temperatures. Many surface failure mechanisms such as creep, fatigue, fretting fatigue, corrosion, and stress corrosion cracking start from the surface. Thus, studying the surface mechanical properties and deformation behavior of materials is vital in order to draw a correlation between the surface properties and failures. Herein, a nanoindentation technique was implemented to characterize surface properties of a widely used additively manufactured (AM) superalloy, i.e., Inconel 625. The specimens were tested in a range of temperatures in a vacuum chamber. Serrated plastic flow characterized by pop-in events during nanoindentation, known as Portevin-Le Chatelier (PLC) effect, was observed in all three tested elevated temperatures. This phenomenon depicts itself as bursts of plasticity in the loading section of the load-displacement curves. These bursts were studied comprehensively to explore incipient plasticity. Hertzian contact mechanics were implemented to extract the maximum shear stress beneath the indenter from the pop-in loads. The results show that the initial pop-in load increases as the temperature increases. The average initial pop-in load increases by almost four times from 300 °C to 650 °C. This was attributed to the formation of strengthening precipitates. The average size of the serrations and the magnitude of dislocation nucleation increase from 300 °C to 500 °C and decrease from 500 °C to 650 °C. Finally, the serrations are attributed to the dislocation generation and movement as well as their interaction with the solute atoms and precipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Extreme ultraviolet microscope characterization using photomask surface roughness

We demonstrate a method for characterizing the field-dependent aberrations of a full-field synchrotron-based extreme ultraviolet microscope. The statistical uniformity of the inherent, atomic-scale roughness of readily-available photomask blanks enables a self-calibrating computational procedure using images acquired under standard operation. We characterize the aberrations across a 30-um field-of-view, demonstrating a minimum aberration magnitude of smaller than λ/21 rms averaged over the center 5-um area, with a measurement accuracy better than λ/180 rms. The measured field variation of aberrations is consistent with system geometry and agrees with prior characterizations of the same system. In certain cases, it may be possible to additionally recover the illumination wavefront from the same images. Our method is general and is easily applied to coherent imaging systems with steerable illumination without requiring invasive hardware or custom test objects; hence, it provides substantial benefits when characterizing microscopes and high-resolution imaging systems in situ.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Oblique angle deposition of boron carbide films by magnetron sputtering

Many applications of boron carbide (B4C) films entail deposition on non-planar substrates, necessitating a better understanding of oblique angle deposition phenomena. Here, we systematically study the effect of substrate tilt on properties of B 4 C films with thicknesses up to 10 μm deposited by direct current magnetron sputtering. Results show that all films are amorphous and columnar with an average column width of ~100 nm, independent of substrate tilt. Column tilt angles are limited to ~20° even for substrate tilt of 80°. Film density, residual stress, and the refractive index weakly (within ≲20%) depend on substrate tilt. Furthermore, oxygen impurities bond preferentially with carbon atoms in inter-columnar regions. Substrate tilt has a major effect on mechanical properties that decrease by ~50%, suggesting weak interconnection between nano-columns. Implications of these observations for the deposition onto non-planar substrates are discussed.

36 MATERIALS SCIENCE↗
NASA NTRS1976

A statistical method for treating molecular line opacities

A method for treating atomic and molecular line opacities in cool stellar atmospheres by a statistical opacity sampling is investigated. Under the usual assumptions of plane-parallel geometry, radiative equilibrium, hydrostatic equilibrium, and LTE, each radiative quantity is computed monochromatically at each chosen frequency and depth without any averaging of the opacity. The number of frequencies needed to allow an accurate integration of the energy flux over a given spectral interval is investigated as a function of depth, including opacity for both CN and C2. This method is extended to the calculation of a model atmosphere of a star, and the effect of the number and placement of frequency points is studied. The method is applied to treating molecular lines of CO, C2, and CN in a cool carbon star. Significant advantages of the opacity sampling method are its flexibility, which permits computation of models having arbitrary variations of chemical composition and of opacity with wavelength and depth, and generalizability to include departures from LTE.

Sneden, C.↗
NASA NTRS1979

A method to estimate critical volumes

Methods for estimating the volume of the critical temperature used for the estimation of thermodynamic properties of substances are described. The possibility to estimate the critical temperature by using a combination of only eighteen atomic and structural contributions is shown. These contributions are listed and the critical temperature is given by a linear expression. By comparing the Vetere (1976) and Lydersen (1955) methods with the method discussed it is noted that while all three methods yield about the same average error (about 3%), the new method is superior in that it requires a smaller number of increments to fit data points.

Fedors, R. F.↗
NASA NTRS1986

Process-induced defects in solar cell silicon

The microstructure of as-grown and processed, edge-defined film-fed grown, silicon ribbons was studied in order to identify the basic mechanisms responsible for the change of the as-grown defect structure during processing at elevated temperatures. The short heat treatment required to diffuse the p-n junction was sufficient to cause heterogeneous precipitation of impurity atoms, particularly transition metals. In addition, an elastic recovery of the ribbon occurred by dislocation glide, resulting in the formation of a polygonizationlike structure of subboundaries in the base. Mechanisms are suggested by which twin boundaries, acting as dislocation obstacles, can concentrate the relatively low average dislocation densities typical of edge-defined film-fed grown ribbons (10 to the 4th to 10 to the 8th/sq cm) to values which are sufficient to induce the formation of subgrainlike boundary structures.

Gleichmann, R.↗