Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aspect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Low-speed tests of a high-aspect-ratio, supercritical-wing transport model equipped with a high-lift flap system in the Langley 4- by 7-meter and Ames 12-foot pressure tunnels

The Ames 12-Foot Pressure Tunnel was used to determine the effects of Reynolds number on the static longitudinal aerodynamic characteristics of an advanced, high-aspect-ratio, supercritical wing transport model equipped with a full span, leading edge slat and part span, double slotted, trailing edge flaps. The model had a wing span of 7.5 ft and was tested through a free stream Reynolds number range from 1.3 to 6.0 x 10 to 6th power per foot at a Mach number of 0.20. Prior to the Ames tests, an investigation was also conducted in the Langley 4 by 7 Meter Tunnel at a Reynolds number of 1.3 x 10 to 6th power per foot with the model mounted on an Ames strut support system and on the Langley sting support system to determine strut interference corrections. The data obtained from the Langley tests were also used to compare the aerodynamic charactertistics of the rather stiff, 7.5-ft-span steel wing model tested during this investigation and the larger, and rather flexible, 12-ft-span aluminum-wing model tested during a previous investigation. During the tests in both the Langley and Ames tunnels, the model was tested with six basic wing configurations: (1) cruise; (2) climb (slats only extended); (3) 15 deg take-off flaps; (4) 30 deg take-off flaps; (5) 45 deg landing flaps; and (6) 60 deg landing flaps.

Morgan, H. L., Jr.↗
NASA NTRS1985

Discussion of the paper, Some Aspects of Propulsion for the Augmenter-Wing Concept, by D. C. Whittley

Many modern concepts for STOL and V/STOL aircraft rely on integration of the propulsion system with the wing to create favorable lift interactions, and are known as powered lift concepts. A study of powered lift, concerning management and control of the various propulsive streams or jets is presented, each concept having its own particular objectives and requirements. Some specific objectives of this kind are described which relate to the augmentor wing. Consideration is given to three aspects of the subject, namely the augmentor flap itself, the wind ducting and augmentor primary nozzle, and the choice of powerplant or engine cycle. More generally, comments are made regarding noise attenuation and the prospect for achieving a low overall noise level for jet STOL aircraft of the future.

Schmitt, H.↗
NASA NTRS1985

Practical aspects of photovoltaic technology, applications and cost (revised)

The purpose of this text is to provide the reader with the background, understanding, and computational tools needed to master the practical aspects of photovoltaic (PV) technology, application, and cost. The focus is on stand-alone, silicon solar cell, flat-plate systems in the range of 1 to 25 kWh/day output. Technology topics covered include operation and performance of each of the major system components (e.g., modules, array, battery, regulators, controls, and instrumentation), safety, installation, operation and maintenance, and electrical loads. Application experience and trends are presented. Indices of electrical service performance - reliability, availability, and voltage control - are discussed, and the known service performance of central station electric grid, diesel-generator, and PV stand-alone systems are compared. PV system sizing methods are reviewed and compared, and a procedure for rapid sizing is described and illustrated by the use of several sample cases. The rapid sizing procedure yields an array and battery size that corresponds to a minimum cost system for a given load requirement, insulation condition, and desired level of service performance. PV system capital cost and levelized energy cost are derived as functions of service performance and insulation. Estimates of future trends in PV system costs are made.

Rosenblum, L.↗
NASA NTRS1985

Circular-to-rectangular transition ducts for high-aspect ratio nonaxisymmetric nozzles

The next generation fighter aircraft will be equipped with nonaxisymmetric multifunction jet engine exhaust systems. The circular-to-rectangular transition duct employed in these systems has been made longer with the objective to maintain uniform flow. The weight of the exhaust system increases with increasing nozzle aspect ratio. The new design is to provide enhanced maneuvering and STOL performance. It is attempted to reduce the increase in weight as much as possible by new design strategies. The present paper has the objective to show through experimental data that the current design guidelines for transition ducts can be expanded so that shorter transitions are possible thereby reducing the nonaxisymmetric exhaust system weight penalty.

Burley, J. R., II↗
NASA NTRS1985

Mars atmospheric circulation - Aspects from Viking Landers

Winds measured by the two Viking Landers have been filtered and then compared with predictions from the general circulation model and to Orbiter observations of clouds and surface phenomena that indicate wind direction. This was done to determine the degree to which filtered winds may represent aspects of the general circulation. Excellent agreement was found between wind direction data from Lander 1 and the model predictions and Orbiter observations. For Lander 2, agreement was generally good, but there were periods of disagreement which indicate that the filtering did not remove other extraneous effects. It is concluded that Lander 1 gives a good representation of the general circulation at 22.5 deg N latitude but that Lander 2 is suspect. Most wind data from Lander 1 have yet to be analyzed. It appears that when analyzed these Lander 1 data (covering 3.5 Mars years) can provide information about interannual variations in the general circulation at the Lander latitude.

Ryan, J. A.↗
NASA NTRS1985

Lift due to thickness for low aspect ratio wings in incompressible flow

The problem under consideration is a numerical study of the effects of thickness on lift for low aspect ratio wings in steady incompressible inviscid flow at moderate angles of attack. At these angles of attack the flow separates along the leading edge giving rise to a lift substantially higher than that computed by classical attached flow potential theory. The problem is treated as a perturbation expansion in a small thickness parameter. The lifting elements of the flow are modeled using a nonlinear vortex lattice method which replaces the leading and trailing edge vortex sheets by segmented straight vortex filaments. The thickness elements of the flow are modeled with a mean plane source distribution and a modification to the wing boundary conditions. Results are obtained for wings with biconvex and NACA 0012 sections which compare well with available experimental data. The important observation that the effect of thickness is to decrease the lift is made.

Dodbele, S. S.↗
NASA NTRS1985

The buffeting pressure field of a high-aspect-ratio swept wing

An experimental study of the fluctuating pressure field of a high-aspect-ratio swept transport-type wing model in transonic buffeting flow is examined. A high degree of similarity between the buffet-related features of the wing flowfield and 2-D transonic flowfields is indicated. At several spanwise stations, unsteady lift produced by the pressure fluctuations is evaluated and found to increase in intensity as local flow separation develops. Results show that although the wing does vibrate, the measured lift fluctuations are driving, and not driven by wing vibrations. The influence of tunnel-flow unsteadiness on the data is considered.

Roos, F. W.↗
NASA NTRS1985

An asymptotic theory for the interference of large aspect ratio swept wings and multiple propeller slipstreams

This paper presents an asymptotic method for the analysis of the interference of multiple tractor propeller slipstream with large aspect ratio swept wings. It is assumed that the height of the slipstream is of the order of the wing chord and its spanwise extent is of the order of the wing span. Three different flow regions are identified by employing different stretching transformations. Asymptotic expansions are made in each of the three regions, using the chord to span ratio as the small expansion parameter. The details of the nonuniform flow in the slipstream enter into the wing sectional analysis. In the outer limit, the wing shrinks to a swept lifting line, and the slipstream reduces to a thin sheet of jet carrying the momentum gain from the propeller. The curvature of this jet sheet results in a pressure difference which is represented by a vortex sheet. The governing equations are solved by discretization. Several examples are considered for which experimental data are available. Comparison of the present results with the experimental data as well as other numerical solutions showed generally good agreement.

Prabhu, R. K.↗
NASA NTRS1985

Thin-film module circuit design: Practical and reliability aspects

This paper will address several aspects of the design and construction of submodules based on thin film amorphous silicon (a-Si) p i n solar cells. Starting from presently attainable single cell characteristics, and a realistic set of specifications, practical module designs are discussed from the viewpoints of efficient designs, the fabrication requirements, and reliability concerns. The examples center mostly on series interconnected modules of the superstrate type with detailed discussions of each portion of the structure in relation to its influence on module efficiency. Emphasis is placed on engineering topics such as: area coverage, optimal geometries, and cost and reliability. Practical constraints on achieving optimal designs, along with some examples of potential pitfalls in the manufacture and subsequent performance of a-Si modules are discussed.

Daiello, R. V.↗
NASA NTRS1985

Computational aspects of zonal algorithms for solving the compressible Navier-Stokes equations in three dimensions

Transonic flow fields about wing geometries are computed using an Euler/Navier-Stokes approach in which the flow field is divided into several zones. The flow field immediately adjacent to the wing surface is resolved with fine grid zones and solved using a Navier-Stokes algorithm. Flow field regions removed from the wing are resolved with less finely clustered grid zones and are solved with an Euler algorithm. Computational issues associated with this zonal approach, including data base management aspects, are discussed. Solutions are obtained that are in good agreement with experiment, including cases with significant wind tunnel wall effects. Additional cases with significant shock induced separation on the upper wing surface are also presented.

Holst, T. L.↗
NASA NTRS1985

Pressure-distribution measurements on a transonic low-aspect ratio wing

Experimental surface pressure distributions and oil flow photographs are presented for a 0.90 m semispan model of NASA/Lockheed Wing C, a generic transonic, supercritical, low aspect ratio, highly 3-dimensional configuration. This wing was tested at the design angle of attack of 5 deg over a Mach number range from 0.25 to 0.96, and a Reynolds number range from 3.4 x 1,000,000 to 10 x 1,000,000. Pressures were measured with both the tunnel floor and ceiling suction slots open for most of the tests but taped closed for some tests to simulate solid walls. A comparison is made with the measured pressures from a small model in high Reynolds number facility and with predicted pressures using two three dimesional, transonic full potential flow wing codes: design code FLO22 (nonconservative) and TWING code (conservative). At the given design condition, a small region of flow separation occurred. At a Mach number of 0.82 the flow was unseparated and the surface flow angles were less than 10 deg, indicating that the boundary layer flow was not 3-D. Evidence indicate that wings that are optimized for mild shock waves and mild pressure recovery gradients generally have small 3-D boundary layer flow at design conditions for unseparated flow.

Keener, E. R.↗
NASA NTRS1985

Global aspects of monsoons

Recent developments are studied in three areas of monsoon research: (1) global aspects of the monsoon onset, (2) the orographic influence of the Tibetan Plateau on the summer monsoon circulations, and (3) tropical 40 to 50 day oscillations. Reference was made only to those studies that are primarily based on FGGE Level IIIb data. A brief summary is given.

Murakami, T.↗
NASA NTRS1986

Flutter analysis of low aspect ratio wings

Several very low aspect ratio flat plate wing configurations are analyzed for their aerodynamic instability (flutter) characteristics. All of the wings investigated are delta planforms with clipped tips, made of aluminum alloy plate and cantilevered from the supporting vehicle body. Results of both subsonic and supersonic NASTRAN aeroelastic analyses as well as those from another version of the program implementing the supersonic linearized aerodynamic theory are presented. Results are selectively compared with the experimental data; however, supersonic predictions of the Mach Box method in NASTRAN are found to be erratic and erroneous, requiring the use of a separate program.

Parnell, L. A.↗
NASA NTRS1986

Theoretical analysis of the electrical aspects of the basic electro-impulse problem in aircraft de-icing applications

A summary of modeling the electrical system aspects of a coil and metal target configuration resembling a practical electro-impulse deicing (EIDI) installation, and a simple circuit for providing energy to the coil, was presented. The model was developed in sufficient theoretical detail to allow the generation of computer algorithms for the current in the coil, the magnetic induction on both surfaces of the target, the force between the coil and target, and the impulse delivered to the target. These algorithms were applied to a specific prototype EIDI test system for which the current, magnetic fields near the target surfaces, and impulse were previously measured.

Henderson, R. A.↗
NASA NTRS1986

Effect of aspect ratio on sidewall boundary-layer influence in two-dimensional airfoil testing

The effect of sidewall boundary layers in airfoil testing in two-dimensional wind tunnels is investigated. The non-linear crossflow velocity variation induced because of the changes in the sidewall boundary-layer thickness is represented by the flow between a wavy wall and a straight wall. Using this flow model, a correction for the sidewall boundary-layer effects is derived in terms of the undisturbed sidewall boundary-layer properties, the test Mach number and the airfoil aspect ratio. Application of the proposed correction to available experimental data showed good correlation for the shock location and pressure distribution on airfoils.

Murthy, A. V.↗
NASA NTRS1986

Divergence study of a high-aspect ratio, forward-swept wing

A study has been conducted in the NASA-Langley Transonic Dynamics wind tunnel to determine the divergence characteristics of a high aspect ratio forward swept wing of rectangular planform, for sweep angles of zero, -15, -30, -45, and -60 deg. In addition to a rectangular wingtip, a tip whose geometry lay parallel with the freestream flow was tested at a sweep angle of -45 deg. The primary objective was to obtain data that could be used to verify the divergence prediction capabilities of an aeroelastic analysis code employing kernel function aerodynamics. The analytical predictions of convergence were found to be conservative for all forward sweep angles, and the effect of the two tip shapes on divergence dynamic pressure were accurately predicted.

Cole, S. R.↗
NASA NTRS1986

Computational aspects of heat transfer in structures via transfinite element formulations

The paper presents a generalized Transform Method based Finite Element methodology for thermal analysis with emphasis on the computational aspects of heat transfer in structures. The purpose of this paper is to present an alternate methodology for thermal analysis of structures and therein outline the advantages of the approach in comparison with conventional finite element schemes and existing practices. The overall goals of the research, however, are aimed first toward enhanced thermal formulations and therein to provide avenues for subsequent interdisciplinary thermal/structural analysis via a common numerical methodology. Basic concepts of the approach for thermal analysis is described with emphasis on a Laplace Transform based finite element methodology. Highlights and characteristic features of the approach are described via generalized formulations and applications to several problems. Results obtained demonstrate excellent agreement in comparison with analytic and/or conventional finite element solutions with savings in computational times and model sizes. Potential of the approach for interdisciplinary thermal/structural problems are also identified.

Tamma, K. K.↗