SEARCH · Engineering Papers

Results for “Waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Approaches to attributing underwater noise to a wave energy converter

Radiated noise from marine energy harvesting is of environmental and engineering interest. Here, drifting hydrophones measure underwater noise in the vicinity of a relatively small wave energy converter. A statistical approach is demonstrated for attributing range-dependent, commonly occurring sounds in the frequency band from 90 to 600 Hz. Time-delay-of-arrival localization is then demonstrated for attribution of individual acoustic events likely associated with the power takeoff and wave-hull interactions. Because the radiated noise from the wave energy converter falls below ambient levels at a range of approximately 150 m, it is unlikely to substantially affect marine life at greater distance.

16 TIDAL AND WAVE POWER↗

DOE OSTI2025

WEC-SIM Support for an Innovative Zero Discharge Supercritical Water Based Wave Energy Desalination System (CRADA Final Report)

NREL will assist East Carolina University in its development of the foundational knowledge and proof of concept that are needed for future process scale up and commercialization of a sustainable wave-to-water (direct pressurization) desalination unit powered by a wave energy converter. NREL will provide guidance and support to East Carolina University on its: use of the NREL developed WEC-Sim based wave to water system, exploring the WEC-Sim/ASPEN Plus data exchange communication, and using experimental data to hopefully provide validation of analytical models.

16 TIDAL AND WAVE POWER↗

DOE OSTI2026

FullWave — A Full Wave Parallel Code for Modeling RF Fields in Hot Tokamak Plasma

FullWave is a computer code that simulates how radio-frequency (RF) waves travel and deposit energy in the hot plasma inside a fusion reactor. RF waves are used to heat the plasma and drive electrical current, which is essential for sustaining fusion reactions. The code uses a new algorithm that can handle much finer spatial detail than previous codes — more than 100 times finer — while running efficiently on national supercomputers. It incorporates a detailed physics model that captures subtle kinetic effects important for accurate prediction of wave behavior. Under this project, FullWave was extended to cover multiple RF frequency ranges relevant to present and future tokamaks, and validated against experimental parameters from the DIII-D tokamak at General Atomics. Results were published in peer-reviewed journal articles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Convectively coupled Rossby–Gravity waves in a field campaign: How they are captured in reanalysis products

Abstract Convectively coupled equatorial waves are a significant source of atmospheric variability in the tropics. Current numerical models continue to struggle in simulating the coupled diabatic heating fields that are responsible for the development and maintenance of these waves. This study investigates how the diabatic fields associated with Mixed Rossby–Gravity waves (MRGs) are represented in four reanalysis products by using a unique observational dataset from the TRMM‐KWAJEX (Tropical Rainfall Measuring Mission‐Kwajalein Experiment) field campaign. These reanalyses include ERA5, Japanese 55‐year Reanalysis (JRA‐55), Climate Forecast System Reanalysis (CFSR), and Modern‐Era Retrospective Analysis for Research and Applications (MERRA). We found that all four reanalyses captured the MRG structures in winds and temperature, and to a lesser degree in the humidity field except in the boundary layer. However, only the ERA5 and MERRA reanalyses captured the gradual rise and succession of the diabatic heating from boundary layer turbulence, shallow convection, cumulus congestus, and deep convection within the waves. ERA5 is the only product that also captured the gradual rise of the subgrid‐scale vertical transport of moist static energy. All reanalysis products underestimated the diabatic heating from cumulus congestus. Results provide observational basis on what aspects of MRG can be trusted and what cannot in the reanalysis products.

Wang, Xiaocong↗

DOE OSTI2021

Heating and acceleration of ions with Kappa distribution functions by low‐frequency Alfvén wave

Abstract Heating and acceleration of ions with Kappa distribution functions (with parameter ) in low‐beta plasmas, by a low‐frequency Alfvén wave, is investigated using test‐particle simulations, yielding interesting new results. As long as the Alfvén wave amplitude is sufficiently large, the computed net heating energy of ions becomes independent of the wave frequency and amplitude, always approaching the same value of . The eventual energy of ions is dictated only by the initial ion energy and the ratio of the magnetic field energy density to the plasma density. The heating effect of the Kappa ions increases with . During the heating process, the ions are picked up by the Alfvén wave and pitch angle scattered, forming a quasi‐isotropic spherical shell velocity distribution. The Kappa ions are accelerated in the parallel direction, reaching a bulk flow speed roughly equal to the local Alfvén speed. Higher ‐value in the initial Kappa distribution leads to faster saturation. The above results may explain certain features of the ion heating and acceleration in the solar wind and corona.

Li, Kehua↗

DOE OSTI2021

Compressional wave velocity and effective stress in unsaturated soil: Potential application for monitoring moisture conditions in vadose zone sediments

Compressional seismic (P-wave) velocities were measured experimentally at different water potentials and confining pressure states using a variety of sediments collected from the US Department of Energy Hanford Site in southeastern Washington State. P-wave velocity was measured in variably saturated sediments using ultrasonic piezoelectric transducers and water potential was measured with a heat dissipation sensor. We propose a model to relate changes in P-wave velocity to soil stress conditions using an effective stress formulation that includes capillary stress as well as adsorptive stress. We show that compressional wave velocities can be related to water potential and confining stress using a model with five fitted parameters. A single set of parameters provides an excellent fit to data acquired from all of the sediment samples. Under very dry conditions, corresponding to low water potentials, water flow occurs in adsorptive thin films associated with very low unsaturated hydraulic conductivities. The results presented here suggest the utility of seismic methods for establishing low water potential and flow conditions within variably saturated Hanford formation sediments and providing feedback on the performance of mitigation efforts such as soil desiccation and surface infiltration barriers. Seismic methods can provide minimally invasive, three-dimensional information on relevant flow conditions in vadose zone sediments as well as changes that occur over time.

Linneman, Dorothy C.↗

DOE OSTI2023

QCD-collapsed domain walls: QCD phase transition and gravitational wave spectroscopy

Abstract For a discrete symmetry that is anomalous under QCD, the domain walls produced in the early universe from its spontaneous breaking can naturally annihilate due to QCD instanton effects. The gravitational waves generated from wall annihilation have their amplitude and frequency determined by both the discrete symmetry breaking scale and the QCD scale. The evidence of stochastic gravitational waves at nanohertz observed by pulsar timing array experiments suggests that the discrete-symmetry-breaking scale is around 100 TeV, assuming the domain-wall explanation. The annihilation temperature is about 100 MeV, which could naturally be below the QCD phase transition temperature. We point out that the QCD phase transition within some domains with an effective large QCDθangle could be a first-order one. To derive the phase diagram inθand temperature, we adopt a phenomenological linear sigma model with three quark flavors. The domain-wall explanation for the NANOGrav, EPTA, PPTA and CPTA results hints at a first-order QCD phase transition, which predicts additional gravitational waves at higher frequencies. If the initial formation of domain walls is also a first-order process, this class of domain-wall models predicts an interesting gravitational wave spectroscopy with frequencies spanning more than ten orders of magnitude, from nanohertz to 100 Hz.

Physics↗

DOE OSTI2026

A Bayesian inferencing framework for ultrasound wave speed measurements in metal additive manufacturing

Process-related changes during metal additive manufacturing introduce microstructural variability in the material properties of printed parts, directly affecting component reliability. Accurate estimation of these property variations with part performance are essential for quality assurance. Ultrasound testing offers a non-destructive means to estimate mechanical properties and detect defects; however, conventional analysis methods often neglect the influence of microstructural variability, limiting their effectiveness. Here, this research presents a Bayesian inference technique for quantifying wave speed uncertainty from ultrasound measurements of metal additive manufactured parts. By integrating prior ultrasound data with a Bayesian model, the proposed approach generates posterior density estimates of wave speed that systematically account for manufacturing-induced variability and uncertainty. The novelty of this research lies in applying a Bayesian framework to analyze experimental ultrasound measurements within the context of metal additive manufacturing variability. The method enhances the accuracy of wave speed estimation by 64%, defect position by 50% and increases confidence associated with wave speed variance by 30% across different porosity levels, thereby providing a robust foundation for improved decision-making and increased reliability in additively manufactured components.

Additive manufacturing↗

DOE OSTI2026

Arctic Deployment of a Fully Integrated Self-Powered Drifting Buoy Harvesting Wave Energy via a Triboelectric Nanogenerator

The Arctic Ocean remains one of the most poorly sampled regions on Earth, where improved in situ environmental monitoring is vital for advancing oceanographic and atmospheric studies. However, data collection efforts are constrained by the short operational lifespans and high costs of conventional systems. Drifting buoys powered by pendulum-driven wave energy harvesters offer a cost-effective alternative, yet earlier designs have neither been optimized for real-world wave conditions nor validated in the Arctic. In this study, we develop a self-powered drifting buoy that integrates a pendulum-driven triboelectric nanogenerator (TENG) system with a mechanical motion rectifier, a high-gear-ratio transmission, and power management circuits. Through coupled buoy–pendulum dynamic simulations and laboratory testing using a motion simulator, we identify an optimal pendulum mass of 1.6 kg (12.7% of total buoy weight) that maximizes energy output while maintaining buoy stability. Laboratory experiments achieved average power outputs of 12.7 mW under Arctic-like wave and temperature conditions. The system was successfully deployed in the Bering Sea, where it generated 11 J of energy in 3.1 m waves, marking the first Arctic deployment of a TENG-based drifting buoy for sea surface temperature monitoring. This work establishes a cost-effective framework for designing self-powered Arctic monitoring platforms and advances the feasibility of long-term environmental observations in real Arctic waters.

marine enerby↗

DOE OSTI2022

Characterization of nonlinear ultrasonic waves behavior while interacting with poor interlayer bonds in large-scale additive manufactured materials

Over the past decades, researchers have developed several nonlinear ultrasonic techniques for quality control of materials commonly used in different applications. Owing to the superior sensitivity of nonlinear ultrasound waves to small defects such as micro-cracks, their applicability in different nondestructive testing (NDT) problems has been investigated in numerous studies. These studies utilize frequency domain analysis to detect the generation of higher harmonics because of the formation of defects in the inspected medium. Frequency domain analysis based on the Fourier transform is a significant approach used in linear systems; however, it may not perform adequately on nonlinear systems. Hence, studies on nonlinear dynamics and physics consider analyzing systems' behavior in the phase-space domain. In contrast to the frequency domain analysis, which can result in information loss, analysis in the phase-space domain retains all the information regarding a system's states. Here, we investigate the nonlinearities induced by poor interlayer bonding in polymer-based additive manufactured parts in the phase-space domain. It is convenient to characterize the nonlinearity in the phase-space domain because it provides a geometrical representation of a system's states. Two types of low quality interlayer bond are considered. The first type is simulated artificially while the second type is manufactured by reducing the bond quality during the printing process. The analysis verified that the received ultrasonic signals exhibit classical nonlinear behavior in the phase-space domain while interacting with simulated poor interlayer bonds. In addition, the results showed that the behavior of ultrasonic waves is amplitude-dependent and evolves into models that have not been previously reported. Furthermore, Largest Lyapunov Exponent (LLE) is used to quantify the behavior of nonlinear ultrasonic waves while interacting with poor interlayer bonds. Using LLE, it was observed that the divergence rate of the phase-space trajectories depends on the amplitude of the excitation. This observation quantitatively proves that nonlinear behavior of ultrasound while interacting with poor interlayer bonds can be amplitude-dependent. The results of both simulated and inherent poor interlayer bond cases showed that LLE can be used as a reliable quantitative damage-sensitive feature to detect and potentially characterize weak bonds, which are difficult to detect using conventional approaches. Additionally, the reported results in the phase-space domain provide a basis for proposing a new mathematical model for ultrasonic waves interacting with poor interlayer bonds.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Noninvasive liquid level sensing with laser generated ultrasonic waves

This article proposes a noninvasive liquid level sensing technique using laser-generated ultrasound waves for nuclear power plant applications. Liquid level sensors play an important role of managing the coolant system safely and stably in the plant structure. Current sensing techniques are mostly intrusive, performing inside the fluidic structure, which is disadvantageous in terms of the regular maintenance of the plant system. Furthermore, typical intrusive sensors do not perform stably under varying environmental conditions such as temperature and radiation. In this study, sensing units are attached to the outer surface of a liquid vessel to capture guided ultrasound waves in a nonintrusive manner. The signal intensity of the guided wave dissipates when the signal interacts with the internal liquid media. The sensing mechanism is mathematically expressed as an index value to correlate the liquid level with the sensor signal. For the acoustic wave generation, laser-generated ultrasound was adopted instead of using typical contact type transducers. Following the simulation validation of the proposed concept, the performance of the developed sensor was confirmed through experimental results under elevated liquid temperature conditions. Finally, the nonlinear multivariable regression exhibited the best-fit to the datasets measured under the variable liquid level and temperature conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2025

Oceanic mixing and waves in the presence of a suspended canopy

Large-eddy simulations are analysed to determine the influence of suspended canopies, such as those formed in macroalgal farms, on ocean mixed layer (OML) deepening and internal wave generation. In the absence of a canopy, we show that Langmuir turbulence, when compared with wind-driven shear turbulence, results in a deeper OML and more pronounced internal waves beneath the OML. Subsequently, we examine simulations with suspended canopies of varying densities located in the OML, in the presence of a background geostrophic current. Intensified turbulence occurs in the shear layer at the canopy’s bottom edge, arising from the interaction between the geostrophic current and canopy drag. Structures resembling Kelvin–Helmholtz (KH) instability emerge as the canopy shear layer interacts with the underlying stratification, radiating internal waves beneath the OML. Both intensified turbulence and lower-frequency motions associated with KH-type structures are critical factors in enhancing mixing. Consequently, the OML depth increases by up to a factor of two compared with cases without a canopy. Denser canopies and stronger geostrophic currents lead to more pronounced KH-type structures and internal waves, stronger turbulence and greater OML deepening. Additionally, vertical nutrient transport is enhanced as the OML deepens due to the presence of the canopy. Considering that the canopy density investigated in this study closely represents offshore macroalgal farms, these findings suggest a mechanism for passive nutrient entrainment conducive to sustainable farming. Overall, this study reveals the intricate interactions between the suspended canopy, turbulent mixing and stratification, underscoring their importance in reshaping OML characteristics.

Bo, Tong (ORCID:0000000260300561)↗

DOE OSTI2023

Benchmarking magnetised three-wave coupling for laser backscattering: analytic solutions and kinetic simulations

Understanding magnetised laser–plasma interactions is important for controlling magneto-inertial fusion experiments and developing magnetically assisted radiation and particle sources. For nanosecond pulses at non-relativistic intensities, interactions are dominated by coherent three-wave interactions, whose nonlinear coupling coefficients became known only recently when waves propagate at oblique angles with the magnetic field. In this paper, backscattering coupling coefficients predicted by warm-fluid theory are benchmarked using particle-in-cell simulations in one spatial dimension, and excellent agreements are found for a wide range of plasma temperatures, magnetic field strengths and laser propagation angles, when the interactions are mediated by electron-dominant hybrid waves. Systematic comparisons between theory and simulations are made possible by a rigorous protocol. On the theory side, the initial boundary value problem of linearised three-wave equations is solved, and the transient-time solutions allow the effects of growth and damping to be distinguished. On the simulation side, parameters are carefully chosen and calibration runs are performed to ensure that comparisons are well controlled. Fitting simulation data to analytical solutions yields numerical growth rates that match theory predictions within error bars. Although warm-fluid theory is found to be valid for a wide parameter range, genuine kinetic effects have also been observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Rotating Alfvén waves in rotating plasmas

Angular momentum coupling between a rotating magnetized plasma and torsional Alfvén waves carrying orbital angular momentum (OAM) is examined. It is demonstrated not only that rotation is the source of Fresnel–Faraday rotation – or orbital Faraday rotation effects – for OAM-carrying Alfvén waves, but also that angular momentum from an OAM-carrying Alfvén wave can be transferred to a rotating plasma through the inverse process. For the direct process, the transverse structure angular rotation frequency is derived by considering the dispersion relation for modes with opposite OAM content. For the inverse process, the torque exerted on the plasma is derived as a function of wave and plasma parameters.

Physics↗

DOE OSTI2025

Stability Frontiers in the AM 6 X 6 Kagome Metals: The Ln Nb 6 Sn 6 ( Ln :Ce–Lu,Y) Family and Density-Wave Transition in LuNb 6 Sn 6

The kagome motif is a versatile platform for condensed matter physics, hosting rich interactions between magnetic, electronic, and structural degrees of freedom. In recent years, the discovery of a charge density wave (CDW) in the AV 3 Sb 5 superconductors and structurally-derived bond density waves (BDW) in FeGe and ScV 6 Sn 6 have stoked the search for new kagome platforms broadly exhibiting density wave (DW) transitions. Here, in this work, we evaluate the known AM 6 X 6 chemistries and construct a stability diagram that summarizes the structural relationships among the >125 member family. Subsequently, we introduce our discovery of the broader LnNb 6 Sn 6 (Ln:Ce–Nd,Sm,Gd–Tm,Lu,Y) family of kagome metals and an analogous DW transition in LuNb 6 Sn 6 . Our X-ray scattering measurements clearly indicate a (1/3, 1/3, 1/3) ordering wave vector (√$\bar{3}$ x √$\bar{3}$ x $3$ superlattice) and diffuse scattering on half-integer L-planes. Our analysis of the structural data supports the “rattling mode” DW model proposed for ScV 6 Sn 6 and paints a detailed picture of the steric interactions between the rare-earth filler element and the host Nb–Sn kagome scaffolding. We also provide a broad survey of the magnetic properties within the HfFe 6 Ge 6 -type LnNb 6 Sn 6 members, revealing a number of complex antiferromagnetic and metamagnetic transitions throughout the family. This work integrates our new LnNb 6 Sn 6 series of compounds into the broader AM 6 X 6 family, providing new material platforms and forging a new route forward at the frontier of kagome metal research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Atomic Evolution of Hydrogen Intercalation Wave Dynamics in Palladium Nanocrystals Revealed by Liquid-Phase Transmission Electron Microscopy

Solute-intercalation-induced phase separation creates spatial heterogeneities in host materials, a phenomenon ubiquitous in batteries, hydrogen storage, and other energy devices. Despite many efforts, probing intercalation processes at the atomic scale has been a significant challenge. By utilizing liquid-phase transmission electron microscopy (TEM), we study hydrogen (de)intercalation in palladium nanocrystals as a model system and have achieved unprecedented atomic-resolution imaging of hydrogen intercalation wave dynamics. Our observations reveal that intercalation wave mechanisms, instead of shrinking-core mechanisms, prevail at ambient temperature for palladium nanocubes ranging from ∼60 nm down to ∼10 nm. Systematic image analysis uncovers the atomic evolution of the hydrogen intercalation wave, transitioning from nonplanar and inclined boundaries to those closely aligned with {100} planes. Our kinetic Monte Carlo simulations demonstrate that the observed intercalation wave dynamics correspond to sorption pathways minimizing the lattice mismatch strain at the phase boundary. In conclusion, unveiling the atomic intercalation pathways holds profound implications for engineering intercalation-mediated devices and advancements in energy sciences.

Lee, Daewon [Lawrence Berkeley National Laboratory↗

DOE OSTI2021

On the Ion Precipitation due to Field Line Curvature (FLC) and EMIC Wave Scattering and Their Subsequent Impact on Ionospheric Electrodynamics

Both field line curvature (FLC) and electromagnetic ion cyclotron (EMIC) wave scattering are believed to be associated with energetic ion precipitation, but their relative contributions to ionospheric ion precipitation and subsequent effects are still unclear. Here, in this study, by using a kinetic ring current model, we investigate their impact on the ionosphere from two aspects: the global distribution of ion precipitation and resulting ionospheric conductance. Our results show that the intensity and coverage of ion precipitation due to EMIC waves are larger than that due to FLC scattering, while the latter mostly contributes to ion precipitation in outer regions (L > 4–5). We then estimate the conductance with empirical models using the simulated ion precipitation energy flux. When the EMIC wave associated proton precipitation is included, the conductance is significantly enhanced in the dusk-to-midnight sector and has a wide magnetic latitude (MLAT) range from around 52° to 62°, considerably altering the electric potential in the dusk sector, which further influences particle dynamics in the magnetosphere. On the contrary, the proton precipitation caused by FLC scattering only occurs at higher latitudes above MLAT = 60° and the corresponding conductance is slightly enhanced at midnight, with negligible influence on the convective electric potential. Although electron precipitation-associated conductance is predominant globally, the results show that proton precipitation can also play an important role in ionospheric electrodynamics, especially when EMIC wave-associated precipitating proton energy flux exceeds that of electrons in the dusk sector, a region where many subauroral coupling processes occur.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Stochastic Inversion of Gaussian Random Media Using Transverse Coherence Functions for Reflected Waves: Theory and Method

The transverse coherence functions (TCFs) of phase and amplitude fluctuations of a seismic wave are powerful to estimate the spatial distribution, length scales, and strength of random heterogeneities. However, TCFs have been formulated for transmitted waves only, not for reflected waves. In this paper, we derive reflection TCFs for Gaussian random media. Furthermore, we propose to invert for Gaussian random media using the reflection TCFs based on the grid search. We validate the new reflection TCF formulas using 2D finite-difference numerical experiments. The numerical example also illustrates the feasibility and efficiency of the inversion. The stochastic inversion using reflected waves can be used in both exploration and global seismology.

58 GEOSCIENCES↗