Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transition state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

The Millimeter- and Submillimeter-Wave Spectrum of Gauche-Ethyl Alcohol

We report an investigation of the rotational-torsional spectrum of the gauche rotational isomers of ethyl alcohol in the 51е05 GHz frequency region. Over a thousand transitions between rotational levels in the gauche substates of the ground OH torsional state have been measured and assigned. These transitions involve rotational quantum numbers J and Ka up to 30 and 15, respectively, and are of two types: a-type transitions between levels in either the gauche+ or the gaucheРsubstate, and c-type transitions between rotational levels in the different substates. The majority of these transitions have been fit satisfactorily using a two-state Hamiltonian based on the fixed framework axis method (FFAM). The rotation, distortion, and interaction constants have been determined along with the energy difference between the two gauche substates. The derived constants can be used to predict many more transitions accurately for astronomical purposes. The J and Ka region where the two-state analysis can be used has been determined. The basis for a three-state analysis including the trans substate is presented and the applicability of the FFAM approach is discussed.!

rotational-torsional↗
NASA NTRS1996

The Millimeter- and Submillimeter-Wave Spectrum of Gauche-Ethyl Alcohol

We report an investigation of the rotational-torsional spectrum of the gauche rotational isomers of ethyl alcohol in the 51-505 GHz frequency region. Over a thousand transitions between rotational levels in the gauche substates of the ground OH torsional state have been measured and assigned. These transitions involve rotational quantum numbers J and K(sub a) up to 30 and 15, respectively, and are of two types: alpha-type transitions between levels in either the gauche+ or the gauche-substate, and c-type transitions between rotational levels in the different substates. The majority of these transitions have been fit satisfactorily using a two-state Hamiltonian based on the Fixed Framework Axis Method (FFAM). The rotation, distortion, and interaction constants have been determined along with the energy difference between the two gauche substates. The derived constants can be used to predict many more transitions accurately for astronomical purposes. The J and K(sub a) region where the two-state analysis can be used has been determined. The basis for a three-state analysis including the trans substate is presented and the applicability of the FFAM approach is discussed.

Pearson, J. C.↗
NASA NTRS1981

Infrared /IR/ spectroscopy in support of atmospheric measurements

In general, the data required for the more abundant species are: (1) linewidths as a function of temperature; (2) line strength measurements obtained at various temperatures when since quantum assignments for the lines are unknown the lower state energy levels are unknown; and (3) line strength measurements of the 'hot' bands and bands of the isotopic species. It is pointed out that an extensive list of line center frequencies and line strengths from 2400 to 3200 per cm of (CH4)4 has recently been added to the Air Force Geophysics Laboratory compilation. Since many of the lines in the list could not be assigned, the laboratory research required measurements of samples at various temperatures in order to experimentally determine the temperature dependence on the line strengths. The 'hot' band here refers to transitions arising from vibrational states other than the ground state. 'Hot' bands are usually near the parent band (arising from the ground state). Very few 'hot' bands are without parent bands.

Toth, R. A.↗
NASA NTRS1989

Fluid hydrogen at high density - The plasma phase transition

A new model equation of state is applied, based on realistic interparticle potentials and a self-consistent treatment of the internal levels, to fluid hydrogen at high density. This model shows a strong connection between molecular dissociation and pressure ionization. The possibility of a first-order plasma phase transition is considered, and for which both the evolution in temperature and the critical point is given.

Saumon, D.↗
NASA NTRS1996

UTC Dissemination to the Real-Time User

The current definition of Coordinated Universal Time (UTC) dates from 1972. The duration of a UTC second is defined in terms of the frequency of a hyperfine transition in the ground state of cesium. This standard frequency is realized in a number of different laboratories using ensembles of commercial cesium clocks and a few primary frequency standards. The data from all of these devices are transmitted periodically to the Bureau International des Poids et Mesures (BIPM) in Sevres, France, where they are combined in a statistical procedure to produce International Atomic Time (TAI). The time of this scale is adjusted as needed ('coordinated') by adding or dropping integer seconds so as to keep it within plus or minus 0.9 s of UT1, a time scale based on the observation of the transit times of stars and corrected for the predicted seasonal variations in these observations. When the leap seconds are included into TAI, the result is called UTC. The difference between TAI and UTC is therefore an exact integer number of seconds. This difference is currently 29 s and will become 30 s at 0 UTC on 1 January 1996.

Levine, Judah↗
NASA NTRS2020

Desorption Kinetics of O and CO from Graphitic Carbon Surfaces

The desorption of O/CO from graphitic carbon surfaces is investigated using a one-dimensional model describing the adsorbate interactions with the surface phonon bath. The kinetics of desorption are described through the solution of a master equation for the time-dependent population of the adsorbate in an oscillator state, which is modified through thermal fluctuations at the surface. The interaction of the adsorbate with the surface phonons is explicitly captured by using the computed phonon density Of states (PDOS) of the surface. The coupling of the adsorbate with the phonon bath results in the transition of the adsorbate up and down a vibrational ladder. The adsorbate-surface interaction is represented in the model using a Morse potential, which allows for the desorption process to be directly modeled as a transition from bound to free (continuum) state. The PDOS is a property of the material and the lattice; and is highly sensitive to the presence of defects. The effect of etch pits along with random surface defects on the PDOS is considered in the present work. The presence of defects causes a redshift and broadening of the PDOS, which in turn changes the phonon frequency modes available for adsorbate coupling at the surface. Using the realistic PDOS distributions, the phonon-induced desorption (PID) model was used to compute the transition and desorption rates for both pristine and defective systems. Mathissen’s rule is used to compute the phonon relaxation time for pristine and defective systems based on the phonon scattering times for each of the different scattering processes. First, the desorption rates of the pristine system is fitted against the experimental values to obtain the Morse potential parameters for each of the observed adatoms. These Morse potential parameters are used along with the defective PDOS and phonon relaxation time to compute the desorption rates for the defective system. The defective system rates (both transition and desorption) were consistently lower in comparison with the pristine system. The difference between the transition rates is more significant at lower initial states due to higher energy spacing between the levels. In the case of the desorption rates, the difference between the defective and pristine system is more significant at higher temperatures. The desorption rates for each of the system shows an order of magnitude decrease with the strongly bound systems exhibiting the greatest reduction in the desorption rates.

Swaminathan-Gopalan, Krishnan↗
NASA NTRS1987

Pumping the stellar hydroxyl maser

IRAS far-IR flux data for 163 OH maser stars were analyzed to quantify the contributions 35 and 53 microns inversions make to pumping of the hydroxyl maser. The 35 microns transition is from the 3,3 ground state to the 1,5 rotationally excited level and subsequent decay; the 53 microns transition is a change from the ground state to the 1,3 excited level and relaxation. The stars examined included Mira, short period semi-regular and long-period semi-regular variables. Both transition lines had rough parity in contributing to the approximately 8 percent pumping efficiency at 1612 MHz. However, the individual contributions of the lines could not be determined for the stellar population studied.

Dickinson, Dale F.↗
NASA NTRS2004

Microscale Investigation of Thermo-Fluid Transport in the Transition FIL, Region of an Evaporating Capillary Meniscus Using a Microgravity Environment

In order to enhance the fundamental understanding of thin film evaporation and thereby improve the critical design concept for two-phase heat transfer devices, microscale heat and mass transport is to be investigated for the transition film region using state-of-the-art optical diagnostic techniques. By utilizing a microgravity environment, the length scales of the transition film region can be extended sufficiently, from submicron to micron, to probe and measure the microscale transport fields which are affected by intermolecular forces. Extension of the thin film dimensions under microgravity will be achieved by using a conical evaporator made of a thin silicon substrate under which concentric and individually controlled micro-heaters are vapor-deposited to maintain either a constant surface temperature or a controlled temperature variation. Local heat transfer rates, required to maintain the desired wall temperature boundary condition, will be measured and recorded by the concentric thermoresistance heaters controlled by a Wheatstone bridge circuit, The proposed experiment employs a novel technique to maintain a constant liquid volume and liquid pressure in the capillary region of the evaporating meniscus so as to maintain quasi-stationary conditions during measurements on the transition film region. Alternating use of Fizeau interferometry via white and monochromatic light sources will measure the thin film slope and thickness variation, respectively. Molecular Fluorescence Tracking Velocimetry (MFTV), utilizing caged fluorophores of approximately 10-nm in size as seeding particles, will be used to measure the velocity profiles in the thin film region. An optical sectioning technique using confocal microscopy will allow submicron depthwise resolution for the velocity measurements within the film for thicknesses on the order of a few microns. Digital analysis of the fluorescence image-displacement PDFs, as described in the main proposal, can further enhance the depthwise resolution.

Kihm, K. D.↗
NASA NTRS1984

Polarization of radio molecular lines and mapping of magnetic field direction

Two level calculations by others for the linear polarizations expected for molecular emission lines from interstellar clouds are extended by considering a number of coupled rotational states of a diatomic molecule. Higher transitions commonly have strengths comparable with that of the J=1-0 transition so that depolarization due to coupling between the various J states might be expected to reduce the predicted linear polarization. The significance of the null observational results obtained recently by Wannier, Scoville, and Barvainis is assessed. The inclusion of additional states tends to decrease the maximum polarizations, though the calculated polarization is increased under conditions for which superthermal excitation occurs.

Deguchi, S.↗
NASA NTRS1999

Investigation of Strain/Vorticity and Large-Scale Flow Structure in Turbulent Nonpremixed Jet Flames

Our study will use the microgravity environment to investigate the underlying flow structure of turbulent nonpremixed round jet flames. In particular, we aim to investigate the large-scale turbulent structure using planar laser Mie scattering (PLMS), and the strain rate and vorticity fields using particle image velocimetry (PIV). This work is motivated by recent studies in our laboratory that have led to several interesting observations of nominally momentum-driven turbulent nonpremixed planar flames. First of all, the organized large-scale turbulent structures that are observed in nonreacting planar jets may be substantially modified or suppressed in nonpremixed planar jet flames. Furthermore, a recent study using PIV and planar laser-induced fluorescence of OH has shown that in transitional and turbulent nonpremixed planar jet flames the presence of the flame seems to greatly influence the underlying vorticity and strain fields, as compared to nonreacting jets. For example, the reaction zones in the jet flames are strongly correlated with regions of high vorticity. A related study has demonstrated that vorticity is not correlated in the same way with either iso-scalar surfaces or scalar dissipation layers in nonreacting planar jets. Furthermore, the relationship between strain and the reaction zone appears to be modified by the presence of high levels of heat release. In particular, the strain rate field in planar jet flames exhibits a preferred direction of principal compressive strain that apparently is related to strong shear across the reaction zone. This preferred direction of strain was not observed in nonreacting jets. One of the major problems encountered when conducting these types of studies is that it is difficult to know to what extent buoyancy influences the results. Therefore, the microgravity environment provides us with an excellent opportunity to explore these issues without the complicating effects of buoyancy. This is particularly the case when studying flames that are transitional between laminar and turbulent states. For example, the strong correlation of vorticity with the reaction zone (discussed above) was observed in both transitional and turbulent planar flames, but the effect was stronger for the transitional case. To date, the reason for the presence of the vorticity-reaction zone correlation is not known, although vorticity production via baroclinic torque is a likely cause. The microgravity environment will allow us to specifically determine whether the vorticity is produced by baroclinic torque resulting from the flame density gradient acting with the hydrostatic pressure gradient.AAdditional details of the planned experiments are provided.

Clemens, N. T.↗
NASA NTRS1974

Transient rotordynamic analysis for the space-shuttle main engine high-pressure oxygen turbopump

A simulation study was conducted to examine the transient rotordynamics of the space shuttle main engine (SSME) high pressure oxygen turbopump (HPOTP) with the objective of identifying, anticipating, and avoiding rotordynamic problem areas. Simulations were performed for steady state operations at emergency power levels and for critical speed transitions. No problems are indicated in steady state operation of the HPOTP emergency power levels, although the results indicated that a rubbing condition will be experienced during critical speed transition at shutdown, particularly involving rotor deceleration rate and imbalance distribution rubbing at the turbine floating-ring seals. The condition is correctable by either reducing the imbalance at the HPOTP hot gas turbine wheels, or by a more rapid deceleration of the rotor through it critical speed.

Childs, D. W.↗
NASA NTRS1990

On the periodicity of symbolic observations of piecewise smooth discrete-time systems

A study is made of the behavior of discrete-time systems composed of a set of smooth transition maps coupled by a quantized feedback function. The feedback function partitions the state space into disjoint regions and assigns a smooth transition function to each region. The main result is that under a constraint on the norm of the derivative of the transition maps, a bounded state trajectory with limit points in the interior of the switching regions leads to a region index sequence that is eventually periodic. Under these assumptions, it is shown that eventually the feedback function is determined by a finite state automaton. A similar result is proved in the case of finite state dynamic feedback.

Ramadge, Peter J.↗
NASA NTRS1967

Liquid propulsion

The Resonant Combustion Program uses a bombing technique to precipitate the transition from the steady state to the resonant, or oscillatory, rocket combustion mode. The initial pressure disturbance produced by the high-explosive device, when exploded in a nonreactive environment of cold N2 gas, is a blast-wave having an initial amplitude of several thousand psi (within a radius of approximately one inch from the bomb case) which is still several hundred psi strong even at a radius of 4 to 5 in. The use of such a severe triggering disturbance has brought up the question of whether or not the violent sustained oscillatory mode observed in this program is forced by the character of the initial disturbance itself.

INJECTOR↗