Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Fermilab Booster Transition Crossing Simulations and Beam Studies

The Fermilab Booster accelerates beam from 400 MeV to 8 GeV at 15 Hz. In the PIP (Proton Improvement Plan) era, it is required that Booster deliver 4.2 x $10^{12}$ protons per pulse to extraction. One of the obstacles for providing quality beam to the users is the longitudinal quadrupole oscillation that the beam suffers from right after transition. Although this oscillation is well taken care of with quadrupole dampers, it is important to understand the source of these oscillations in light of the PIP II requirements that require 6.5 x $10^{12}$ protons per pulse at extraction. This paper explores the results from machine studies, computer simulations and solutions to prevent the quadrupole oscillations after transition.

Bhat, C. M.↗

The energy balance of the solar transition region

It is shown how the observed distribution of the emission measure with temperature can be used to limit the range of energy deposition functions suitable for heating the solar transition region and inner corona. The minimum energy loss solution is considered in view of the work by Hearn (1975) in order to establish further scaling laws between the transition region pressure, the maximum coronal temperature and the parameter giving the absolute value of the emission measure. Also discussed is the absence of a static energy balance at the base of the transition region in terms of measurable atmospheric parameters, and the condition for a static energy balance is given. In addition, the possible role of the emission from He II in stabilizing the atmosphere by providing enhanced radiation loss is considered.

Jordan, C.↗

Osborne Reynolds pipe flow: Direct simulation from laminar through gradual transition to fully developed turbulence

We report that the precise dynamics of breakdown in pipe transition is a century-old unresolved problem in fluid mechanics. We demonstrate that the abruptness and mysteriousness attributed to the Osborne Reynolds pipe transition can be partially resolved with a spatially developing direct simulation that carries weakly but finitely perturbed laminar inflow through gradual rather than abrupt transition arriving at the fully developed turbulent state. Our results with this approach show during transition the energy norms of such inlet perturbations grow exponentially rather than algebraically with axial distance. When inlet disturbance is located in the core region, helical vortex filaments evolve into large-scale reverse hairpin vortices. The interaction of these reverse hairpins among themselves or with the near-wall flow when they descend to the surface from the core produces small-scale hairpin packets, which leads to breakdown. When inlet disturbance is near the wall, certain quasi-spanwise structure is stretched into a Lambda vortex, and develops into a large-scale hairpin vortex. Small-scale hairpin packets emerge near the tip region of the large-scale hairpin vortex, and subsequently grow into a turbulent spot, which is itself a local concentration of small-scale hairpin vortices. This vortex dynamics is broadly analogous to that in the boundary layer bypass transition and in the secondary instability and breakdown stage of natural transition, suggesting the possibility of a partial unification. Under parabolic base flow the friction factor overshoots Moody’s correlation. Plug base flow requires stronger inlet disturbance for transition. Finally, accuracy of the results is demonstrated by comparing with analytical solutions before breakdown, and with fully developed turbulence measurements after the completion of transition.

42 ENGINEERING↗

Synthesis, characterization and formation process of transition metal oxide nanotubes using carbon nanofibers as templates

Mono and binary transition metal oxide nanotubes could be synthesized by the immersion of carbon nanofiber templates into metal nitrate solutions and removal of the templates by heat treatment in air. The transition metal oxide nanotubes were composed of nano-crystallites of metal oxides. The functional groups on the carbon nanofiber templates were essential for the coating of these templates: they acted as adsorption sites for the metal nitrates, ensuring a uniform metal oxide coating. During the removal of the carbon nanofiber templates by calcination in air, the metal oxide coatings promoted the combustion reaction between the carbon nanofibers and oxygen. - Graphical abstract: Mono and binary transition metal-oxide nanotubes could be synthesized by the immersion of carbon nanofiber templates into metal nitrate solutions and removal of the templates by heat treatment in air.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Transitions to chaos in two-dimensional double-diffusive convection

The partial differential equations governing two-dimensional thermosolutal convection in a Boussinesq fluid with free boundary conditions have been solved numerically in a regime where oscillatory solutions can be found. A systematic study of the transition from nonlinear periodic oscillations to temporal chaos has revealed sequences of period-doubling bifurcations. Overstability occurs if the ratio of the solutal to the thermal diffusivity tau is less than 1 and the solutal Rayleigh number Rs is sufficiently large. Solutions have been obtained for two representative values of tau. For tau = 0.316, R(s) = 10,000, symmetrical oscillations undergo a bifurcation to asymmetry, followed by a cascade of period-doubling bifurcations leading to aperiodicity, as the thermal Rayleigh number R(T) is increased. At higher values of R(T), the bifurcation sequence is repeated in reverse, restoring simple periodic solutions. As R(T) is further increased more period-doubling cascades, followed by chaos, can be identified. Within the chaotic regions there are narrow periodic windows, and multiple branches of oscillatory solutions coexist. Eventually the oscillatory branch ends and only steady solutions can be found. The development of chaos has been investigated for tau = 0.1 by varying R(T) for several different values of R(s). When R(s) is sufficiently small there are periodic solutions whose period becomes infinite at the end of the oscillatory branch. As R(s) is increased, chaos appears in the neighborhood of these heteroclinic orbits. At higher values of R(s), chaos is found for a broader range in R(T). A truncated fifth-order model suggest that the appearance of chaos is associated with heteroclinic bifurcations.

Knobloch, E.↗

A reversible solvent segregation transition at grain boundaries in gold-platinum alloys

Solute segregation to grain boundaries in polycrystalline metals and ceramics is a well-known phenomenon that reduces the total energy of the material. In this letter, the segregation of the solvent (Au) to grain boundaries in a binary Au 1-x Pt x (x = 0.15 to 0.18) alloy is demonstrated. After heating in the range of 500 °C to 600 °C and quenching to room temperature, grain boundaries in the alloy are enriched in Au at a mean level of ∼ 4 atoms/nm 2 . When the alloy is annealed at 300 °C and quenched, the mean grain boundary composition is closer to the bulk composition. When the alloy is reheated to 500 °C, the segregation is reestablished, demonstrating that the transformation from the strongly segregated complexion to the weakly segregated complexion is reversible. The driving force for the solvent segregation is likely the lower grain boundary energy of Au in comparison to Pt.

36 MATERIALS SCIENCE↗

THE DISCOVERY OF HD 37605c AND A DISPOSITIVE NULL DETECTION OF TRANSITS OF HD 37605b

We report the radial velocity discovery of a second planetary mass companion to the K0 V star HD 37605, which was already known to host an eccentric, P {approx} 55 days Jovian planet, HD 37605b. This second planet, HD 37605c, has a period of {approx}7.5 years with a low eccentricity and an Msin i of {approx}3.4 M{sub Jup}. Our discovery was made with the nearly 8 years of radial velocity follow-up at the Hobby-Eberly Telescope and Keck Observatory, including observations made as part of the Transit Ephemeris Refinement and Monitoring Survey effort to provide precise ephemerides to long-period planets for transit follow-up. With a total of 137 radial velocity observations covering almost 8 years, we provide a good orbital solution of the HD 37605 system, and a precise transit ephemeris for HD 37605b. Our dynamic analysis reveals very minimal planet-planet interaction and an insignificant transit time variation. Using the predicted ephemeris, we performed a transit search for HD 37605b with the photometric data taken by the T12 0.8 m Automatic Photoelectric Telescope (APT) and the MOST satellite. Though the APT photometry did not capture the transit window, it characterized the stellar activity of HD 37605, which is consistent of it being an old, inactive star, with a tentative rotation period of 57.67 days. The MOST photometry enabled us to report a dispositive null detection of a non-grazing transit for this planet. Within the predicted transit window, we exclude an edge-on predicted depth of 1.9% at the >>10{sigma} level, and exclude any transit with an impact parameter b > 0.951 at greater than 5{sigma}. We present the BOOTTRAN package for calculating Keplerian orbital parameter uncertainties via bootstrapping. We made a comparison and found consistency between our orbital fit parameters calculated by the RVLIN package and error bars by BOOTTRAN with those produced by a Bayesian analysis using MCMC.

79 ASTRONOMY AND ASTROPHYSICS↗

Today’s Energy Challenges, Tomorrow’s Solutions: Circular Economy: Designing to Reduce, Reuse, and Upcycle

Transitioning to a Circular Economy the days of creating, using, and disposing of materials are rapidly coming to a close. This linear economy is not only inefficient and unsustainable, but the scarcity of resources we ultimately will face will make it impossible to maintain. That's why NREL is dedicating resources to research that will underpin a circular economy - designing materials with reducing, reusing, and upcycling in mind for energy-relevant and energy-intensive materials, processes, and technologies. This effort will help mitigate supply issues, promote upcycling, reduce waste, and add value to end-of-life products.

circular economy↗

Can Vanadium Be Substituted into LiFePO[subscript 4]?

Vanadium is shown to substitute for iron in the olivine LiFePO{sub 4} up to at least 10 mol %, when the synthesis is carried out at 550 C. In the solid solution LiFe{sub 1-3y/2}V{sub y}PO{sub 4}, the a and b lattice parameters and cell volume decrease with increasing vanadium content, while the c lattice parameter increases slightly. However, when the synthesis is performed at 650 C, a NASICON phase, Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}, is also formed, showing that solid solution is a function of the synthesis temperature. X-ray absorption near-edge structure indicates vanadium is in the 3+ oxidation state and in an octahedral environment. Magnetic studies reveal a shift of the antiferromagnetic ordering transition toward lower temperatures with increasing vanadium substitution, confirming solid solution formation. The addition of vanadium enhances the electrochemical performance of the materials especially at high current densities.

Omenya, Fredrick↗

Resonance behavior of internal conversion coefficients at low {gamma}-ray energy

A resonance-like structure of internal conversion coefficients (ICCs) at low {gamma}-ray energy (< or approx.100 keV) is studied. Our calculations revealed new, previously unknown resonance minima in the energy dependence of ICCs for the ns shells at E2-E5 transitions. The resonances are the most defined for ICCs in light and medium elements with Z < or approx. 50. It is shown that ICCs may have up to four resonances for outer shells while it has been assumed so far that only one resonance exists. Well-pronounced resonances in ICCs at E1 transition were discovered for the ns shells with n>=2 as well as for the np shells with n>=3 and the nd shells with n>=4 of all elements up to superheavy ones. Simple expressions for approximate values of the E1 resonance energy were obtained which are of importance for determination of the resonance energy range where the interpolation of ICCs taken from tables or databases may give significant errors. The occurrence of resonances in ICCs is explained by vanishing conversion matrix elements under changes of sign. The peculiarities of the behavior of the matrix elements and electron wave functions at the resonance energy are considered. Available experimental ICCs for electric transitions with energies near the expected position of resonances satisfactory agree with our calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermal expansion of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and the solid solution series BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7} (0{<=}x{<=}2) studied by high-temperature X-ray diffraction and dilatometry

The thermal expansion behavior of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and BaZn{sub 2}Si{sub 2}O{sub 7} is characterized by both high-temperature X-ray diffraction (HT-XRD) and dilatometry. Ba{sub 2}ZnSi{sub 2}O{sub 7} and BaZnSiO{sub 4} show a thermal expansion (100-800 Degree-Sign C) in the range from 8.9 to 10.4 Multiplication-Sign 10{sup -6} K{sup -1}. By contrast, BaZn{sub 2}Si{sub 2}O{sub 7} has a much higher thermal expansion in the low-temperature modification and shows a phase transition at 280 Degree-Sign C which runs parallel with a steep increase in cell volume. This phase transition is also observed in the solid solution series BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7}, but it is shifted to higher temperatures and to a smaller volume change with increasing Mg{sup 2+} concentration. This solid solution series is characterized by dilatometry, X-ray diffraction and differential scanning calorimetry. An adjustment of the MgO/ZnO-ratio enables the preparation of materials with a large variety of thermal expansions. - Graphical abstract: XRD-patterns of Ba{sub 2}ZnSi{sub 2}O{sub 7} were recorded at different temperatures (left). For each XRD-pattern a Rietveld-refinement was performed, the image in the middle shows the XRD-pattern measured at room temperature (circles), the Rietveld calculation (red line) and the difference between them (blue line). The lattice parameters derived hereof were plottet against the temperature and fitted to a polynomial (right picture). From those polynomials the lattice expansion was calculated. Highlights: Black-Right-Pointing-Pointer We examined the thermal expansion of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7}. Black-Right-Pointing-Pointer Thermal expansions were determined by dilatometry and high-temperature X-ray diffraction. Black-Right-Pointing-Pointer High-temperature X-ray diffraction enabled to determine anisotropic thermal expansion. Black-Right-Pointing-Pointer BaZn{sub 2}Si{sub 2}O{sub 7} exhibits the highest thermal expansion due to a phase transition. Black-Right-Pointing-Pointer Substitution of small amounts of Zn{sup 2+} for Mg{sup 2+} leads to a decrease in thermal expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

General Considerations of the Electrostatic Boundary Conditions in Oxide Heterostructures

When the size of materials is comparable to the characteristic length scale of their physical properties, novel functionalities can emerge. For semiconductors, this is exemplified by the 'superlattice' concept of Esaki and Tsu, where the width of the repeated stacking of different semiconductors is comparable to the 'size' of the electrons, resulting in novel confined states now routinely used in opto-electronics. For metals, a good example is magnetic/non-magnetic multilayer films that are thinner than the spin-scattering length, from which giant magnetoresistance (GMR) emerged, used in the read heads of hard disk drives. For transition metal oxides, a similar research program is currently underway, broadly motivated by the vast array of physical properties that they host. This long-standing notion has been recently invigorated by the development of atomic-scale growth and probe techniques, which enables the study of complex oxide heterostructures approaching the precision idealized in Fig. 1(a). Taking the subset of oxides derived from the perovskite crystal structure, the close lattice match across many transition metal oxides presents the opportunity, in principle, to develop a 'universal' heteroepitaxial materials system. Hand-in-hand with the continual improvements in materials control, an increasingly relevant challenge is to understand the consequences of the electrostatic boundary conditions which arise in these structures. The essence of this issue can be seen in Fig. 1(b), where the charge sequence of the sublayer 'stacks' for various representative perovskites is shown in the ionic limit, in the (001) direction. To truly 'universally' incorporate different properties using different materials components, be it magnetism, ferroelectricity, superconductivity, etc., it is necessary to access and join different charge sequences, labelled here in analogy to the designations 'group IV, III-V, II-VI' for semiconductors. As we will review, interfaces between different families creates a host of electrostatic issues. They can be somewhat avoided if, as in many semiconductor heterostructures, only one family is used, with small perturbations (such as n-type or p-type doping) around them. However, for most transition metal oxides, this is greatly restrictive. For example, LaMnO{sub 3} and SrMnO{sub 3} are both insulators in part due to strong electron correlations, and only in their solid solution does 'colossal magnetoresistance' emerge in bulk. Similarly, the metallic superlattice shown in Fig. 1(c) can be considered a nanoscale deconstruction of (La,Sr)TiO{sub 3} to the insulating parent compounds. Therefore the aspiration to arbitrarily mix and match perovskite components requires a basic understanding of, and ultimately control over, these issues. In this context, here we present basic electrostatic features that arise in oxide heterostructures which vary the ionic charge stacking sequence. In close relation to the analysis of the stability of polar surfaces and semiconductor heterointerfaces, the variation of the dipole moment across a heterointerface plays a key role in determining its stability. Different self-consistent assignments of the unit cell are presented, allowing the polar discontinuity picture to be recast in terms of an equivalent local charge neutrality picture. The latter is helpful in providing a common framework with which to discuss electronic reconstructions, local-bonding considerations, crystalline defects, and lattice polarization on an equal footing, all of which are the subject of extensive current investigation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reflections, diffractions, and surface waves for an interior impedance wedge of arbitrary angle

The asymptotic-impedance wedge solution for plane-wave illumination at normal incidence is examined for interior wedge diffraction. An efficient method for calculating the diffraction coefficient for arbitrary wedge angle is presented. The asymptotic solution isolates the incident, singly reflected, multiply reflected, diffracted, surface-wave, and associated-surface-wave transition fields. Multiply reflected fields (of any order) from the exact solution arise as ratios of auxiliary Maliuzhinets functions; however, by using properties of these functions, the representation can be reduced to products of reflection coefficients, much more efficient for calculation. A surface-wave transition field is added to the surface wave to retain continuity of the total field at the surface wave boundaries. This formulation is equally valid for both exterior and interior wedges with uniform but different impedances on each face, for both soft and hard polarizations.

Griesser, Timothy↗

Effects of Catalytic Action and Ligand Binding on Conformational Ensembles of Adenylate Kinase

Crystal structures of adenylate kinase (AdK) from Escherichia coli capture two states: an “open” conformation (apo) obtained in the absence of ligands and a “closed” conformation in which ligands are bound. Other AdK crystal structures suggest intermediate conformations that may lie on the transition pathway between these two states. To characterize the transition from open to closed states in solution, X-ray solution scattering data were collected from AdK in the apo form and with progressively increasing concentrations of five different ligands. Scattering data from apo AdK are consistent with scattering predicted from the crystal structure of AdK in the open conformation. In contrast, data from AdK samples saturated with Ap5A do not agree with that calculated from AdK in the closed conformation. Using cluster analysis of available structures, we selected representative structures in five conformational states: open, partially open, intermediate, partially closed, and closed. We used these structures to estimate the relative abundances of these states for each experimental condition. X-ray solution scattering data obtained from AdK with AMP are dominated by scattering from AdK in the open conformation. For AdK in the presence of high concentrations of ATP and ADP, the conformational ensemble shifts to a mixture of partially open and closed states. Even when AdK is saturated with Ap5A, a significant proportion of AdK remains in a partially open conformation. Here, these results are consistent with an induced-fit model in which the transition of AdK from an open state to a closed state is initiated by ATP binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab initio investigation of Ti{sub 2}Al(C,N) solid solutions

M{sub n+1}AX{sub n} phases (M: early transition metal, A: IIIA- or IVA-group element, X: carbon or nitrogen) are layered ternary compounds that possess both metal- and ceramic-like properties with numerous potential applications in bulk and thin film forms, particularly under high-temperature conditions. In this work, we use the cluster expansion formalism to investigate the energetics of C-N interactions across the entire Ti{sub 2}AlC-Ti{sub 2}AlN composition range. It is shown that there is a definite tendency for ordering in the C,N sublattice. However, the molar volume and bulk modulus of the ordered structures found along the Ti{sub 2}AlC-Ti{sub 2}AlN composition range show small deviations from the (linear) rule of mixing, indicating that despite the ordering tendencies, the C-N interactions are not strong and the solution becomes disordered at relatively low temperatures. Random solid solutions of Ti{sub 2}AlC{sub 1-x}N{sub x} are simulated using special quasirandom structures (SQS) with x=0.25, 0.50, and 0.75. The thermodynamic properties of these structures are compared to those of the structures found to belong to the ground state through the cluster expansion approach. It is found that the structural properties of these approximations to random alloys do not deviate significantly from Vegard's law. The trend in the structural parameters of these SQS are found to agree well with available experimental data and the predictions of the bulk modulus suggest a very weak alloying effect--with respect to Vegard's law--on the elastic properties of Ti{sub 2}AlC{sub 1-x}N{sub x}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compressible Solution Properties of Amorphous Polystyrene-block-Polybutadiene, Crystalline Polystyrene-block-Poly(Hydrogenated Polybutadiene) and Their Corresponding Homopolymers: Fluid-Fluid, Fluid-Solid and Fluid-Micelle Phase Transitions in Propane and Propylene

Abstract Polystyrene, polybutadiene, hydrogenated polybutadiene, and styrene diblock copolymers of these homopolymers can form homogenous solutions in compressible solvents, such as propane and propylene, which separate into two bulk phases upon reducing pressure. The cloud and micellization pressures for homopolymer and diblock copolymers are generally found to be higher in propane than in propylene, except for hydrogenated polybutadiene and polystyrene-block-(hydrogenated polybutadiene). Hydrogenated polybutadiene homopolymers and copolymers exhibit relatively pressure-independent crystallization and melting observed in both propane and propylene solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–insulator transition in composition-tuned nickel oxide films

Abstract Thin films of the solid solution Nd 1 − x La x NiO 3 are grown in order to study the expected 0 K phase transitions at a specific composition. We experimentally map out the structural, electronic and magnetic properties as a function of x and a discontinuous, possibly first order, insulator–metal transition is observed at low temperature when x = 0.2. Raman spectroscopy and scanning transmission electron microscopy show that this is not associated with a correspondingly discontinuous global structural change. On the other hand, results from density functional theory (DFT) and combined DFT and dynamical mean field theory calculations produce a 0 K first order transition at around this composition. We further estimate the temperature-dependence of the transition from thermodynamic considerations and find that a discontinuous insulator–metal transition can be reproduced theoretically and implies a narrow insulator–metal phase coexistence with x . Finally, muon spin rotation ( µ SR) measurements suggest that there are non-static magnetic moments in the system that may be understood in the context of the first order nature of the 0 K transition and its associated phase coexistence regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗