SEARCH · Engineering Papers

Results for “Thrusters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

NASA NTRS1976

Compensated control loops for a 30-cm ion thruster

The vaporizer dynamic control characteristics of a 30-cm diameter mercury ion thruster were determined by operating the thruster in an open loop steady state mode and then introducing a small sinusoidal signal on the main, cathode, or neutralizer vaporizer current and observing the response of the beam current, discharge voltage, and neutralizer keeper voltage, respectively. This was done over a range of frequencies and operating conditions. From these data, Bode plots for gain and phase were made and mathematical models were obtained. The Bode plots and mathematical models were analyzed for stability and appropriate compensation networks determined. The compensated control loops were incorporated into a power processor and operated with a thruster. The time responses of the compensated loops to changes in set points and recovery from arc conditions are presented.

Robson, R. R.↗

NASA NTRS1976

Performance documentation of the engineering model 30-cm diameter thruster

The results of extensive testing of two 30-cm ion thrusters which are virtually identical to the 900 series Engineering Model Thruster in an ongoing 15,000-hour life test are presented. Performance data for the nominal fullpower (2650 W) operating point; performance sensitivities to discharge voltage, discharge losses, accelerator voltage, and magnetic baffle current; and several power throttling techniques (maximum Isp, maximum thrust/power ratio, and two cases in between are included). Criteria for throttling are specified in terms of the screen power supply envelope, thruster operating limits, and control stability. In addition, reduced requirements for successful high voltage recycles are presented.

Bechtel, R. T.↗

NASA NTRS1976

Fifteen cm mercury ion thruster research, 1976

Improvements in 15 cm diameter, SERT II, mercury ion thruster performance effected by the use of SHAG optics at 33 V discharge voltage were discussed. At a 200 eV/ion discharge power, 90 percent propellant utilization and 660 mA beam current condition a doubly-to-singly charged ion current ratio of about 4 percent was measured. Performance of the 15 cm multipole mercury thruster (optimized for length and the point of electron injection) was compared to that of divergent (SERT II) and cusped field designs and found to be comparable. The need for a magnetic baffle in the multipole thruster was identified and the preferred point of electron injection was at the upstream end of the discharge chamber. Results of preliminary tests on the effects of discharge voltage and total accelerating voltage on perveance and beam divergence characteristics of two grid ion optics were examined. Experimental data showing the effect of target temperature on sputtering rates in a mercury discharge environment were presented and a deficiency in the tests procedure was identified.

Wilbur, P. J.↗

NASA NTRS1977

Multipole gas thruster design

The development of a low field strength multipole thruster operating on both argon and xenon is described. Experimental results were obtained with a 15-cm diameter multipole thruster and are presented for a wide range of discharge-chamber configurations. Minimum discharge losses were 300-350 eV/ion for argon and 200-250 eV/ion for xenon. Ion beam flatness parameters in the plane of the accelerator grid ranged from 0.85 to 0.93 for both propellants. Thruster performance is correlated for a range of ion chamber sizes and operating conditions as well as propellant type and accelerator system open area. A 30-cm diameter ion source designed and built using the procedure and theory presented here-in is shown capable of low discharge losses and flat ion-beam profiles without optimization. This indicates that by using the low field strength multipole design, as well as general performance correlation information provided herein, it should be possible to rapidly translate initial performance specifications into easily fabricated, high performance prototypes.

Isaacson, G. C.↗

NASA NTRS1976

Compensated control loops for a 30-cm ion thruster

Robson, R. R.↗

NASA NTRS1976

A doubly charged ion model for ion thrusters

A theoretical equilibrium model of doubly charged ion production and loss processes in electron bombardment ion thrusters is presented. The model is shown to predict double ion density levels accurately for 15 and 30 cm diameter thrusters operating with several different grid sets and at several different power levels. The model indicates the dominant mechanism of double ion production involves the singly charged ground state. This result is used to develop a much simpler model which, along with correlations of the average plasma properties, can be used to determine the double ion density in thrusters with acceptable accuracy.

Peters, R. R.↗

NASA NTRS1976

Development of a 30-cm ion thruster thermal-vacuum power processor

The 30-cm Hg electron-bombardment ion thruster presently under development has reached engineering model status and is generally accepted as the prime propulsion thruster module to be used on the earliest solar electric propulsion missions. This paper presents the results of a related program to develop a transistorized 3-kW Thermal-Vacuum Breadboard (TVBB) Power Processor for this thruster. Emphasized in the paper are the implemented electrical and mechanical designs as well as the resultant system performance achieved over a range of test conditions. In addition, design modifications affording improved performance are identified and discussed.

Herron, B. G.↗

NASA NTRS1976

Evolution and status of the 30-cm engineering model ion thruster

In the past five years the 30-cm ion thruster has developed from infancy to maturity through the joint efforts of the NASA Lewis Research Center (LeRC) and the Hughes Research Laboratories (HRL). The evolution of the 30-cm thruster from the 200-series design to the present 900-series is described. This evolution has included both breadboard and engineering model type thrusters. The evolution description includes functional requirements, design, performance, endurance test results, and major features. The major part of the discussion centers on Hughes-built hardware although NASA LeRC contributions are reflected in the designs.

Masek, T. D.↗

NASA NTRS1976

High power operation of a 30-cm mercury bombardment ion thruster

The nominal input power of a 30-cm mercury bombardment ion thruster is 2.5 kW. A representative 30-cm thruster has been operated at higher power levels by increasing either the ion beam voltage or current. Initial results indicate that higher voltage (high specific impulse) operation requires only minor modifications in thruster design. Higher current (low specific impulse) operation, on the other hand, requires improvements in the capabilities of the discharge chamber and ion optics assembly designs to meet lifetime and/or performance specifications. Experimental data is presented and considerations for high power operation (up to 10 kW) are discussed.

Poeschel, R. L.↗

NASA NTRS1976

A 10,000 hour endurance test of a 700 series 30 cm engineering model thruster

This paper describes a 10,000 hour test of the first engineering model of the 30-cm ion thruster which is expected to form the basis of future prime propulsion systems. This test demonstrated the lifetime capability of such critical components as cathodes, vaporizers, isolators, and optics. The results of the test are described including the conclusions derived from an extensive post-test analysis of the thruster. This test did identify a major life limiting problem - discharge chamber erosion. The modifications which have been incorporated in the 900 series 30-cm ion thrusters to minimize this problem are described.

Collett, C. R.↗

NASA NTRS1976

Performance documentation of the Engineering Model 30 cm diameter Thruster

Presented are the results of extensive testing of two 30-cm ion thrusters which are virtually identical to the 900 series Engineering Model Thruster in an ongoing 15,000-hour life test. Included are performance data for the nominal full-power (2650 W) operating point; performance sensitivities to discharge voltage, discharge losses, accelerator voltage, and magnetic baffle current; and several power throttling techniques (maximum Isp, maximum thrust/power ratio, and two cases in between). Criteria for throttling are specified in terms of the screen power supply envelope, thruster operating limits, and control stability. In addition, reduced requirements for successful high voltage recycles are presented.

Bechtel, R. T.↗

NASA NTRS1976

Development of an 8-cm engineering model thruster system

Electric propulsion has been shown to offer major advantages over the techniques currently employed for the control of earth satellites. For a user to realize these advantages, however, requires the availability of a proven, operationally flight-ready propulsion system. Currently an Engineering Model of an 8-cm ion thruster propulsion system is under development. The system includes the thruster unit with its associated reservoir, thruster gimbaling subsystem, and power processing unit. This paper describes the EM System with special emphasis on hardware design and system performance.

Herron, B. G.↗

NASA NTRS1977

Extended performance solar electric propulsion thrust system study. Volume 4: Thruster technology evaluation

Several thrust system design concepts were evaluated and compared using the specifications of the most advanced 30 cm engineering model thruster as the technology base. Emphasis was placed on relatively high power missions (60 to 100 kW) such as a Halley's comet rendezvous. The extensions in thruster performance required for the Halley's comet mission were defined and alternative thrust system concepts were designed in sufficient detail for comparing mass, efficiency, reliability, structure, and thermal characteristics. Confirmation testing and analysis of thruster and power processing components were performed, and the feasibility of satisfying extended performance requirements was verified. A baseline design was selected from the alternatives considered, and the design analysis and documentation were refined. The baseline thrust system design features modular construction, conventional power processing, and a concentrator solar array concept and is designed to interface with the Space Shuttle.

Poeschel, R. L.↗

NASA NTRS1978

Evolution of the 1-mlb mercury ion thruster subsystem

The developmental history, performance, and major lifetests of each component of the present 1-mlb (4.5 mN) thruster system are traced over the past 10 years. The 1-mlb thruster subsystem consists of an 8 cm diameter ion thruster mounted on 2 axis gimbals, a mercury propellant tank, a power electronics unit, a controller/digital interface unit, and necessary electrical harnesses plus propellant tankage and feed lines.

Kerslake, W. R.↗

NASA NTRS1978

A 30-cm mercury ion thruster performance with a 1 kW capacitor-diode voltage multiplier beam supply

A 1 kW solar array and capacitor-diode voltage multiplier converter (S/A-CDVM) was successfully integrated with a 30 cm diameter mercury ion thruster system to provide ion beam power. Measurements were made to compare steady state and transient response performance of a conventional bridge converter with the S/A-CDVM converter used for the ion beam supply. The ability to recover from screen to accelerator arcs and promptly re-establish stable thruster performance was demonstrated. Solar array transient response to thruster arcing was measured.

Terdan, F. F.↗

NASA NTRS1978

Engineering model 8-cm thruster subsystem

An Engineering Model (EM) 8 cm Ion Thruster Propulsion Subsystem was developed for operation at a thrust level 5 mN (1.1 mlb) at a specific impulse 1 sub sp = 2667 sec with a total system input power P sub in = 165 W. The system dry mass is 15 kg with a mercury-propellant-reservoir capacity of 8.75 kg permitting uninterrupted operation for about 12,500 hr. The subsystem can be started from a dormant condition in a time less than or equal to 15 min. The thruster has a design lifetime of 20,000 hr with 10,000 startup cycles. A gimbal unit is included to provide a thrust vector deflection capability of + or - 10 degrees in any direction from the zero position. The EM subsystem development program included thruster optimization, power-supply circuit optimization and flight packaging, subsystem integration, and subsystem acceptance testing including a cyclic test of the total propulsion package.

Herron, B. G.↗

NASA NTRS1978

Scaling relationships for mercury and gaseous propellant ion thrusters

A model describing the doubly charged ion densities in argon and xenon ion thrusters is presented. Doubly charged ions are shown to be produced in significant numbers from both the neutral and singly ionized states. Doubly-to-singly charged ion density ratios calculated using this model are compared to experimental values of this ratio measured in the 15 cm multipole thruster using both propellants. Agreement between theory and experiment is shown to be good. Using this doubly charged ion model, and a similar one obtained previously for mercury, together with the constant neutral loss rate theory, Child's current density law and accelerator grid fabrication limitations, a set of scaling relationships are developed. These relationships show the propellant utilizations, thrust densities and discharge power levels that can be expected as thruster diameter and/or specific impulse are increased and doubly charged ion densities are held at acceptably low values.

Wilbur, P. J.↗

NASA NTRS1978

30-cm mercury ion thruster performance with a 1 kW capacitor-diode voltage multiplier beam supply

A 1 kW Solar Array and Capacitor-Diode Voltage Multiplier Converter (S/A-CDVM) has been successfully integrated with a 30 cm-diameter mercury ion thruster system to provide ion beam power. Measurements were made to compare steady state and transient response performance of a conventional bridge converter with the S/A-CDVM converter used for the ion beam supply. The ability to recover from screen to accelerator arcs and promptly re-establish stable thruster performance was demonstrated. Solar array transient response to thruster arcing was also measured.

Terdan, F. F.↗