Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Theory and Simulation of A Novel Viscosity Measurement Method for High Temperature Semiconductor

The properties of molten semiconductors are good indicators for material structure transformation and hysteresis under temperature variations. Viscosity, as one of the most important properties, is difficult to measure because of high temperature, high pressure, and vapor toxicity of melts. Recently, a novel method was developed by applying a rotating magnetic field to the melt sealed in a suspended quartz ampoule, and measuring the transient torque exerted by rotating melt flow on the ampoule wall. The method was designed to measure viscosity in short time period, which is essential for evaluating temperature hysteresis. This paper compares the theoretical prediction of melt flow and ampoule oscillation with the experimental data. A theoretical model was established and the coupled fluid flow and ampoule torsional vibration equations were solved numerically. The simulation results showed a good agreement with experimental data. The results also showed that both electrical conductivity and viscosity could be calculated by fitting the theoretical results to the experimental data. The transient velocity of the melt caused by the rotating magnetic field was found reach equilibrium in about half a minute, and the viscosity of melt could be calculated from the altitude of oscillation. This would allow the measurement of viscosity in a minute or so, in contrast to the existing oscillation cup method, which requires about an hour for one measurement.

Lin, Bochuan↗
NASA NTRS2003

On the Eastward Travelling Wavenumber Two in the Northern Stratosphere

Disturbances in the middle atmosphere are often interpreted in the framework of waves superimposed on a zonal-mean flow. This paper presents an analysis of travelling waves in the northern hemisphere stratosphere, concentrating on planetary wavenumber two (W2). Space-time spectral analysis reveals the existence of a substantial eastward-travelling planetary W2 at high latitudes in winter. While a similar feature is well documented in the southern hemisphere stratosphere, where it is observed in most winters, this northern hemisphere counterpart is less common and has not been examined in detail. A climatology of occurrence of the wave is given for the northern stratospheric winter. It is denoted as the quasi-16-day eastward travelling W2, because of its dominant periodicity, which ranges from about one to three weeks. Although the wave has some similarities with the southern hemispheric wave, there is much larger interannual and intraseasonal variability in the northern hemisphere. will emphasize the variations in the spatial and temporal structure of this wave, as isolated in meteorological analyses of radiosonde and satellite data. The possible role of these travelling waves in preconditioning the stratosphere as a precursor to sudden stratospheric warmings in both hemispheres will be discussed.

Pawson, Steven↗
NASA NTRS2004

Fluid Structure Interaction in a Turbine Blade

An unsteady, three dimensional Navier-Stokes solution in rotating frame formulation for turbomachinery applications is presented. Casting the governing equations in a rotating frame enabled the freezing of grid motion and resulted in substantial savings in computer time. The turbine blade was computationally simulated and probabilistically evaluated in view of several uncertainties in the aerodynamic, structural, material and thermal variables that govern the turbine blade. The interconnection between the computational fluid dynamics code and finite element structural analysis code was necessary to couple the thermal profiles with the structural design. The stresses and their variations were evaluated at critical points on the Turbine blade. Cumulative distribution functions and sensitivity factors were computed for stress responses due to aerodynamic, geometric, mechanical and thermal random variables.

Gorla, Rama S. R.↗
NASA NTRS2013

Interactions between Coronal Mass Ejections Viewed in Coordinated Imaging and In Situ Observations

The successive coronal mass ejections (CMEs) from 2010 July 30 - August 1 present us the first opportunity to study CME-CME interactions with unprecedented heliospheric imaging and in situ observations from multiple vantage points. We describe two cases of CME interactions: merging of two CMEs launched close in time and overtaking of a preceding CME by a shock wave. The first two CMEs on August 1 interact close to the Sun and form a merged front, which then overtakes the July 30 CME near 1 AU, as revealed by wide-angle imaging observations. Connections between imaging observations and in situ signatures at 1 AU suggest that the merged front is a shock wave, followed by two ejecta observed at Wind which seem to have already merged. In situ measurements show that the CME from July 30 is being overtaken by the shock at 1 AU and is significantly compressed, accelerated and heated. The interaction between the preceding ejecta and shock also results in variations in the shock strength and structure on a global scale, as shown by widely separated in situ measurements from Wind and STEREO B. These results indicate important implications of CME-CME interactions for shock propagation, particle acceleration and space weather forecasting.

Liu, Ying D.↗
NASA NTRS2017

Dynamic/Jitter Assessment of Multiple Potential HabEx Structural Designs

One of the driving structural requirements of the Habitable Exo-Planet (HabEx) telescope is to maintain Line Of Sight (LOS) stability between the Primary Mirror (PM) and Secondary Mirror (SM) of ≤ 5 mas. Dynamic analyses of two configurations of a proposed (HabEx) 4 meter off-axis telescope structure were performed to predict effects of jitter on primary/secondary mirror alignment. The dynamic disturbance used as the forcing function was the James Webb Space Telescope reaction wheel assembly vibration emission specification level. The objective of these analyses was to predict "order-of-magnitude" performance for various structural configurations which will roll into efforts to define the HabEx structural design's global architecture. Two variations of the basic architectural design were analyzed. Relative motion between the PM and the SM for each design configuration are reported.

Knight, J. Brent↗
NASA NTRSDate not supplied

Use of Design of Experiments and Rule-Based Inference in Determining Neural Network Architectures for Loss of Control Detection

In this work, we describe methods for selecting the neural network architectures and input spaces to implement belief state inference on generic commercial transport aircraft. First, we highlight a case study on the planning, execution, and analysis of a set of experiments to determine the configurations of a conditional variational autoencoder (CVAE). We present a structured method that can be used in a number of aerospace applications, to optimize the structure and training parameters of the CVAE for belief state inference, using Design of Experiments (DOE) statistical methodologies. The motivation for this specific DOE was to identify the appropriate hyperparameters for measuring the CVAE reconstruction probability and latent space, such that the measurements can be used to infer qualitative state changes for the aircraft. We demonstrate that this process yields information about a trained neural network’s utility for this specific application, along with a quantifiable range of certainty. We execute 84 experiments using loss-of-control flight maneuver data from a NASA T-2 aircraft, demonstrating that this empirical process allows us to construct cheap and simple models with specific attributes amenable to belief state inference in aerospace applications. While theoretically, we could create a single CVAE with an input space the size of all measurable flight variables and environmental dynamics, it becomes intractable to use such a neural network in an in-situ intelligent multi-agent system. Using the recommendations from our case study, we introduce a technical approach for feasibly describing the belief space by (1) identifying significant statistical relationships among flight variables using rule induction, (2) using a set of rules that cover all features to define the input space of multiple CVAEs, and (3) forming a belief space based on the joint probability density of their collective latent spaces. This results in a series of relatively small matrix multiplications that can be performed in real time, as opposed to large matrix computations in a single CVAE. We demonstrate the application of this approach on the T-2 flight loss-of control experiments, using the architecture and hyperparameter recommendations from the case study. We compare the utilities of an individual CVAE trained on all flight variables and multiple CVAEs defined on subsets of flight variables for detecting qualitative changes in flight. We demonstrate that the use of multiple CVAEs with smaller input spaces permits the CVAE to capture more granular relationships in the latent space, permitting better state space characterization and loss-of-control detection.

Design of experiments↗
NASA NTRSDate not supplied

Dynamic Stability Finite Element Analysis of Multiple Potential Large Space Telescope Structural Designs

One of the driving structural requirements of the Habitable Exo-Planet telescope is to maintain line of sight stability between the primary and secondary mirror of ≤ 5 milli-arc seconds. Dynamic analyses of two configurations of a proposed Habitable Exo-Planet 4 meter off-axis telescope structure were performed to predict effects of a vibration input on primary/secondary mirror alignment. The dynamic disturbance used as the forcing function was the James Webb Space Telescope reaction wheel assembly vibration emission specification level. The objective of these analyses was to predict order-of-magnitude performance for various structural configurations which contribute to efforts in defining the Habitable Exo-Planet structural design’s global architecture. Two variations of the basic architectural design were analyzed. Relative motion between the PM and the SM for each design configuration are reported.

jitter↗
NASA NTRSDate not supplied

Exploring Quantum State Preparation Using Tensor Networks and Sparse Wavefunction Simulations

The variational quantum eigenvalue solver is a powerful hybrid quantum-classical approach that has been suggested as a candidate method to run on near-term quantum hardware for computing ground state electronic energies of molecular systems. However, even for small molecules, the number of variational parameters and qubits required to minimize the electronic energy is beyond the reach of current quantum computers except for small basis sets. We explore a new paradigm for state preparation where we test how much of the optimization can be approximately prepared with classical computers to reduce the number of optimization steps performed using a quantum device. By adapting a recent algorithm for the factorized form of the UCC ansatz, we can study molecular electronic structure problems with up to 64 qubits. In addition, we also test a related approach of using tensor networks to optimize quantum circuits in order to benchmark various lattice models. We present results using these approaches and discuss strategies for incorporating these ideas into variational algorithms involving near-term quantum computers. Our results help demonstrate the strength of the UCC ansatz and address pressing questions about optimal initial parameterizations and circuit construction.

quantum computing↗
NASA NTRS1974

Direct observation of temperature amplitude of solar 300-second oscillations

Intensity variations in the Rayleigh-Jeans portion of the solar continuum spectrum, longward of 1 micron, permit direct observations of the temperature structure of the solar atmosphere. A table indicates the source heights in the HSRA model atmosphere (Gingerich et al. 1971) for several of the infrared windows available for ground-based observations. The existence of 300-sec oscillations in the infrared continuum provides a powerful new tool for the exploration of this phenomenon: variation with altitude, spatial structure, relative phase of temperatures and velocity variations, etc. The initial observations at 20 micron are reported.

Hudson, H. S.↗
NASA NTRS1962

Design comparison of lunar return configurations

Parabolic manned re-entry design comparisons are made between two classes of slender and blunt configurations capable of conventional horizontal and vertical earth landings. Aerodynamic modulation using flaps and control augmentation requirements are discussed in terms of their effect upon re-entry trajectories and landing footprints. Within the environment defined by the re-entry trajectories, the convective and radiative modes of heat transfer are compared, their differences discussed, and the problems associated with the configurations for planetary return missions indicated. Thermal protection systems are discussed and the factors influencing the selection of a given system for the re-entry environment are indicated. Comparison between reflective and absorptive systems are made and the merits of each for a given flight time indicated. A thermo-structural analysis is presented which shows the trade-oft between structural operating temperature and heat protection system thickness requirements. Total heat shield and structural weights are compared for the landing footprints presented and their variation with range shown. Finally, the areas of uncertainty in the aero-thermo structural design analysis are indicated for each class of configuration studied, and the weight differences between conventional horizontal landing and vertical descent configurations are given.

Parabolic flight↗
NASA NTRS1986

Analytical ultrasonics for structural materials

The application of ultrasonic velocity and attenuation measurements to characterize the microstructure of structural materials is discussed. Velocity measurements in cast stainless steel are correlated with microstructural variations ranging from equiaxed (elastically isotropic) to columnar (elastically anisotropic) grain structure. The effect of the anisotropic grain structure on the deviation of ultrasonic waves in cast stainless steel is also reported. Field-implementable techniques for distinguishing equiaxed from columnar grain structures in cast strainless steel structural members are presented. The application of ultrasonic velocity measurements to characterize structural ceramics in the green state is also discussed.

Kupperman, D. S.↗
NASA NTRS2005

The Flow of Plasma in the Solar-Terrestrial Environment

The overall goal of our NASA theory research is to trace the flow of mass, momentum, and energy through the magnetosphere-ionosphere-atmosphere system taking into account the coupling, time delays, and feedback mechanisms that are characteristic of the system. Our approach is to model the magnetosphere-ionosphere-atmosphere (M-I-A) system in a self-consistent quantitative manner using unique global models that allow us to study the coupling between the different regions on a range of spatial and temporal scales. The uniqueness of our global models stems from their high spatial and temporal resolutions, the physical processes included, and the numerical techniques employed. Currently, we have time-dependent global models of the ionosphere, thermosphere, polar wind, plasmasphere, and electrodynamics. It is now becoming clear that a significant fraction of the flow of mass, momentum, and energy in the M-I-A system occurs on relatively small spatial scales. Therefore, an important aspect of our NASA Theory program concerns the effect that mesoscale (100-l000 km) density structures have on the macroscopic flows in the ionosphere, thermosphere, and polar wind. The structures can be created either by structured magnetospheric inputs (i.e., structured electric field, precipitation, or Birkeland current patterns) or by time variations of these inputs due to geomagnetic storms and substorms. Some of the mesoscale structures of interest include sun-aligned polar cap arcs, propagating plasma patches, traveling convection vortices, subauroral ion drift (SAID) channels, gravity waves, and the polar hole.

Schunk, Robert W.↗
NASA NTRS2012

Impact of Acoustic Standing Waves on Structural Responses: Reverberant Acoustic Testing (RAT) vs. Direct Field Acoustic Testing (DFAT)

Loudspeakers have been used for acoustic qualification of spacecraft, reflectors, solar panels, and other acoustically responsive structures for more than a decade. Limited measurements from some of the recent speaker tests used to qualify flight hardware have indicated significant spatial variation of the acoustic field within the test volume. Also structural responses have been reported to differ when similar tests were performed using reverberant chambers. To address the impact of non-uniform acoustic field on structural responses, a series of acoustic tests were performed using a flat panel and a 3-ft cylinder exposed to the field controlled by speakers and repeated in a reverberant chamber. The speaker testing was performed using multi-input-single-output (MISO) and multi-input-multi-output (MIMO) control schemes with and without the test articles. In this paper the spatial variation of the acoustic field due to acoustic standing waves and their impacts on the structural responses in RAT and DFAT (both using MISO and MIMO controls for DFAT) are discussed in some detail.

speakers↗
NASA NTRS1997

Thin Film Multilayer Conductor/Ferroelectric Tunable Microwave Components for Communication Applications

High Temperature Superconductor/Ferroelectric (HTS/FE ) thin film multilayered structures deposited onto dielectric substrates are currently being investigated for use in low loss, tunable microwave components for satellite and ground based communications. The main goal for this technology is to achieve maximum tunability while keeping the microwave losses as low as possible, so as to avoid performance degradation when replacing conventional technology (e.g., filters and oscillators) with HTS/FE components. Therefore, for HTS/FE components to be successfully integrated into current working systems, full optimization of the material and electrical properties of the ferroelectric films, without degrading those of the HTS film; is required. Hence, aspects such as the appropriate type of ferroelectric and optimization of the deposition conditions (e.g., deposition temperature) should be carefully considered. The tunability range as well as the microwave losses of the desired varactor (i.e., tunable component) are also dependent on the geometry chosen (e.g., parallel plate capacitor, interdigital capacitor, coplanar waveguide, etc.). In addition, the performance of the circuit is dependent on the location of the varactor in the circuit and the biasing circuitry. In this paper, we will present our results on the study of the SrTiO3/YBa2Cu3O(7-delta)/LaAl03 (STO/YBCO/LAO) and the Ba(x)Sr(1-x)TiO3/YBa2Cu3O(7-delta)/LaAl03(BSTO/YBCO/ILAO) HTS/FE multilayered structures. We have observed that the amount of variation of the dielectric constant upon the application of a dc electric field is closely related to the microstructure of the film. The largest tuning of the STO/YBCO/LAO structure corresponded to single-phased, epitaxial STO films deposited at 800 C and with a thickness of 500 nm. Higher temperatures resulted in interfacial degradation and poor film quality, while lower deposition temperatures resulted in films with lower dielectric constants, lower tunabilities, and higher losses. For STO/LAO multilayer structures having STO film of similar quality we have observed that interdigital capacitor configurations allow for higher tunabilities and lower losses than parallel plate configurations, but required higher dc voltage. Results on the use of these geometries in working microwave components such as filters and stabilizing resonators for local oscillators (LO) will be discussed.

Miranda, Felix A.↗
NASA NTRS2021

Day-to-Day Variability of Ionosphere Electron Density During Solar Minimum Derived From FORMOSAT-7/COSMIC-2 Measurements

This study examines the day-to-day variability of low-latitude ionosphere using global ionospheric specification (GIS) electron density profiles derived from FORMOSAT-7/COSMIC-2 radio occultation measurements during a deep solar minimum period of August 2019 to July 2020. The measurements reveal significant daily variations over dayside low latitudes, yielding about 10-20% standard deviation in equinoxes, 20-30% in solstices, reaching 40-50% in winter. The nighttime deviations could be 30-60%, being largest in solstices. Day-to-day variations are also observed in the longitudinal wave-4 structures. The period mostly remained geomagnetically quiet except for some moderate disturbances on a few days. Tidal decomposition of the GIS electron density shows that in-situ forced migrating diurnal (DW1) terdiurnal (TW3) oscillations and the background zonal mean yield only ~25% of the daily variations despite accounting for almost 75-90% of the observed electron density. Thus, forcing from lower atmosphere dominates the contribution (~75%) to the observed daily variations. Only about one third of this lower atmospheric forcing comes from the migrating semidiurnal SW2 and the usually investigated non-migrating diurnal eastward DE2, DE3, stationary planetary wave SPW3, SPW4, and semidiurnal eastward SE1, and SE2 components. The residual tides other than those mentioned above, including secondary waves through non-linear interactions and other planetary waves, thus significantly influence the day-to-day variations in electron density and modify the longitudinal wave structures.

day-to-day variability↗
NASA NTRS1995

The imprint of proper motion of nonlinear structures on the cosmic microwave background

We investigate the imprint of nonlinear matter condensations on the cosmic microwave background (CMB) in an Omega = 1, cold dark matter (CDM) model universe. Temperature anisotropies are obtained by numerically evolving matter inhomogeneities and CMB photons from the beginning of decoupling until the present epoch. The underlying density field produced by the inhomogeneities is followed from the linear, through the weakly clustered, into the fully nonlinear regime. We concentrate on CMB temperature distortions arising from variations in the gravitational potentials of nonlinear structures. We find two sources of temperature fluctuations produced by time-varying potentials: (1) anisotropies due to intrinsic changes in the gravitational potentials of the inhomogeneities and (2) anisotropies generated by the peculiar, bulk motion of the structures across the microwave sky. Both effects generate CMB anisotropies in the range of 10(exp -7) approximately less than or equal to (Delta T/T) approximately less than or equal to 10(exp -6) on scales of approximately 1 deg. For isolated structures, anisotropies due to proper motion exhibit a dipole-like signature in the CMB sky that in principle could yield information on the transverse velocity of the structures.

Tuluie, Robin↗
NASA NTRS1986

Processing-structure characterization of rheocast IN-100 superalloy

The rheocasting solidification process was applied in the production of IN-100 nickel base superalloy, and the effects of processing variables, such as stirring speed, isothermal stirring time, and volume fraction solid during isothermal stirring, on the resultant rheocast structure were investigated. Ingots that were furnace cooled at the same rate but without stirring were compared with the rheocast ingots. Rheocasting yielded fine-grained structures, where the extent of microsegregation, the variation in macrostructure, and the solidification-induced porosity and ingot cracking were found to be reduced in comparison to the unstirred ingots. The grain size and nonuniformity were reduced by increasing the stirring speed, isothermal stirring time, or the volume fraction solid during stirring; decreased microsegregation was achieved by an increase in the volume fraction solid. The structures of grain boundaries lent support to the grain boundary mechanism proposed by Vogel et al. (1977) for rheocasting.

Cheng, Jung-Jen Allen↗