Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1957

Abnormal Grain Growth in M-252 and S-816 Alloys

An experimental investigation was carried out on air- and vacuum-melted M-252 and S-816 alloys to find conditions of heating and hot-working which resulted in abnormal grain growth. The experiments were mainly limited to normal conditions of heating for hot-working and heat treatment and normal temperatures of solution treatment were used to allow grain growth after susceptibility to abnormal grain growth was developed by various experimental conditions. Results indicated that small reductions of essentially strain-free metal were the basic cause of such grain growth.

MATERIALS, PROPERTIES - STRUCTURE↗
NASA NTRS1996

Plasma Properties and Magnetic Field Structure of the Solar Corona, Based on Coordinated Max 1991 Observations from SERTS, the VLA, and Magnetographs

The purposes of this investigation are to determine the plasma properties and magnetic field structure of the solar corona using coordinated observations obtained with NASA/GSFC's Solar EUV Rocket Telescope and Spectrograph (SERTS), the Very Large Array (VLA), and magnetographs. The observations were obtained under the auspices of NASA's Max '91 program. The methods of achieving the stated purposes are to use SERTS spectra and spectroheliograms to determine coronal plasma properties such as temperature, density, and emission measure. These properties are subsequently used to calculate the intensity of the thermal bremsstrahlung microwave emission from the coronal plasma (the minimum microwave intensity expected from the emitting plasma). This, in turn, can be used to establish which emission mechanism(s) contribute to the observed microwave emission. Because both mechanisms that may contribute to quiescent active region microwave emission (thermal bremsstrahlung and thermal gyroemission) depend upon the coronal magnetic field in known ways, this information can ultimately be used to derive the coronal magnetic field. Ideally, three-dimensional models of the coronal plasma and magnetic field which are consistent with all of the EUV spectra and spectroheliograms, as well as with the intensity and polarization maps at all of the microwave observing frequencies, can be derived. For completeness, the coronal magnetic field derived from the coordinated multiwaveband observations must be compared with extrapolations from photospheric magnetograms.

Brosius, Jeffrey W.↗
NASA NTRS1995

Plasma properties and magnetic field structure of the solar corona, based on coordinated Max 1991 observations from SERTS, the VLA, and magnetographs

The purposes of this investigation are to determine the plasma properties and magnetic field structure of the solar corona using coordinated observations obtained with NASA/GSFC's Solar EUV rocket Telescope and Spectrograph (SERTS), the Very Large Array (VLA), and magnetographs. The observations were obtained under the auspices of NASA's Max '91 program. The methods of achieving the stated purposes of this investigation are: (1) to use SERTS spectra and spectroheliograms to determine coronal plasma properties such as temperature, density, and emission measure; (2) to use the coronal plasma properties to calculate the intensity of the thermal bremsstrahlung microwave emission from the coronal plasma (the minimum microwave intensity expected from the emitting plasma); (3) to establish which emission mechanism(s) contribute to the observed microwave emission by comparing the calculated thermal bremsstrahlung intensity with the observed microwave intensity; (4) to derive the coronal magnetic field for regions in which gyroemission contributes to the microwave emission by determining the appropriate harmonic of the local electron gyrofrequency; (5) to derive the coronal magnetic field for regions in which thermal bremsstrahlung emission alone is responsible for the observed microwave emission by calculating the magnetic field which yields the observed microwave polarization; (6) to derive three-dimensional models of the coronal plasma and magnetic field which are consistent with all of the EUV spectra and spectroheliograms, as well as with the intensity and polarization maps at all of the microwave observing frequencies; and (7) to compare the coronal magnetic field derived from the coordinated multiwaveband observations with extrapolations from photospheric magnetograms.

Brosius, Jeffrey W.↗
NASA NTRS1994

The physics of coronal closed-field structures

The properties of closed coronal loops are reviewed. First we discuss the main features of the static, hot loop models. In these models thermal conduction plays the dominant role in determining the temperature and density structure. Next the cool loop models and their implications for solar observations are discussed. Finally, some new theoretical results on coronal abundances are presented. It is argued that chromospheric evaporation, which is a basic feature of the hot models, can account for the observed anomalies in the coronal element abundances.

Antiochos, Spiro K.↗
NASA NTRS1990

Computing Mass Properties From AutoCAD

Mass properties of structures computed from data in drawings. AutoCAD to Mass Properties (ACTOMP) computer program developed to facilitate quick calculations of mass properties of structures containing many simple elements in such complex configurations as trusses or sheet-metal containers. Mathematically modeled in AutoCAD or compatible computer-aided design (CAD) system in minutes by use of three-dimensional elements. Written in Microsoft Quick-Basic (Version 2.0).

Jones, A.↗
NASA NTRS2013

Determining the Mechanical Properties of Lattice Block Structures

Lattice block structures and shape memory alloys possess several traits ideal for solving intriguing new engineering problems in industries such as aerospace, military, and transportation. Recent testing at the NASA Glenn Research Center has investigated the material properties of lattice block structures cast from a conventional aerospace titanium alloy as well as lattice block structures cast from nickel-titanium shape memory alloy. The lattice block structures for both materials were sectioned into smaller subelements for tension and compression testing. The results from the cast conventional titanium material showed that the expected mechanical properties were maintained. The shape memory alloy material was found to be extremely brittle from the casting process and only compression testing was completed. Future shape memory alloy lattice block structures will utilize an adjusted material composition that will provide a better quality casting. The testing effort resulted in baseline mechanical property data from the conventional titanium material for comparison to shape memory alloy materials once suitable castings are available.

Wilmoth, Nathan↗
NASA NTRS1993

Level 3 material characterization of NARC HRPF, HRHU, HRHF, and HRPU

The North American Rayon Corporation (NARC) precursor was developed, qualified, and characterized for Space Shuttle nozzle carbon-cloth phenolic ablative materials in three distinct phases. The characterization phase includes thermal and structural material property analysis and comparisons. This report documents the thermal and structural material property characterization performed by Southern Research Institute (SRI) on the two NARC baseline and two crossover materials.

Tobias, Mark E.↗
NASA NTRS2023

Thermomechanical Property Prediction of Amorphous and Crystal PEKK via Molecular Dynamics

Traditionally, advanced aerospace composites have been manufactured using thermoset resins. However, recently, thermoplastics have been investigated for use in the manufacturing of composite materials due to their unique manufacturing characteristics. Thermoplastic resins can be reshaped and formed, along with the added benefit of being recyclable, which thermoset resin cannot. Thermoplastic materials undergo a crystallization process during manufacturing which affects the percent crystallinity of the material. The crystallization needs to be understood better to maximize the potential of thermoplastic resins. PEKK is a thermoplastic material with good chemical, thermal, and mechanical loading resistance. PEKK is also a material NASA is interested in for developing new bonded joint technology. The crystalline microstructure of PEKK is at the micrometer length scale, and it is of interest to model the effects of the crystallinity structure on PEKK’s bulk properties. Molecular dynamics (MD) is a simulation tool that allows for property-structure relationships between atomistic structure and nanometer-length portions of a material. This makes MD a useful tool for developing the structure-property relationship of PEKK. However, the micrometer length scale of PEKK’s crystal structure is too large for MD. Thus, a hybrid approach to modeling PEKK’s microstructure is proposed in this work where MD models are built of both the amorphous and crystalline phases of PEKK. The engineering material properties can be obtained using MD at the nanometer length scale. A micromechanics approach can then generate the micrometer length scale of the crystallinity and the effective properties can be homogenized. The objective of this paper is to show the MD model workflow and the MD-predicted properties of PEKK. The properties can then be homogenized with different crystalline percentages to build design graphs that can be used to tailor PEKK for specific composite applications.

poly ether ketone ketone↗
NASA NTRS1991

A linear control design structure to maintain loop properties during limit operation in a multi-nozzle turbofan engine

The implementation of multi-variable control systems on turbofan engines requires the use of limit protection to maintain safe engine operation. Since a turbofan engine typically encounters limits during transient operation, the use of a limit protection scheme that modifies the feedback loop may void the desired 'guarantees' associated with linear multi-variable control design methods, necessitating considerable simulation to validate the control with limited protection. An alternative control design structure is proposed that maintains the desired linear feedback properties when certain safety limits are encountered by moving the limit protection scheme outside the feedback loop. This proposed structure is compared to a structure with a limit protection scheme that modifies the feedback loop properties. The two design structures are compared using both linear and nonlinear simulations. The evaluation emphasizes responses where the fan surge margin limit is encountered.

Mattern, Duane↗
NASA NTRS2020

Structural evolution, electrochemical kinetic properties, and stability of A-site doped perovskite Sr(1-x)Yb(x)CoO(3-δ)

Mixed ionic and electronic conducting (MIEC) perovskite SrCoO(3-δ) is a widely studied (electro)catalyst for the oxygen reduction reaction (ORR) and possesses different crystal structures at different temperatures. These temperature dependent phase transitions significantly impact the ordering of oxygen vacancies and electrochemical kinetic properties as well as the reliability of the related devices. Some of the crystal structures formed, e.g. hexagonal phases, turn out to be almost impermeable to oxygen gas. Therefore, it is important to stabilize the crystal structure of SrCoO(3-δ) that favors the ORR over a wide temperature range. Herein, the partial substitution of the A-site Sr with Yb is systematically studied, including synthesis, characterization and analysis of structural evolution, electrochemical kinetic properties, thermal stability, and stability in a CO2-containing atmosphere. The results indicate that Sr(0.90)Yb(0.10)CoO(3-δ) is able to stabilize the tetragonal crystal structure with less ordered oxygen vacancies, leading to polarization resistances of 0.051, 0.115 and 0.272 U sq.cm at 750, 700 and 650 °C, respectively, on symmetrical cells. Sr(0.90)Yb(0.10)CoO(3-δ) demonstrates a very stable surface oxygen vacancy distribution and electronic structure near oxygen vacancies but dissociation of adsorbed oxygen molecules into atomic oxygen is affected by surface Sr segregation, and polarization resistance degradation is mainly induced by surface Sr segregation. Furthermore, Sr(0.90)Yb(0.10)CoO(3-δ) exhibits excellent thermal stability as well as excellent recovery stability and improved polarization performance after a few pure air/CO2-containing air treatment cycles at 700 °C. However, a hysteresis behavior of polarization performance is observed at 650 °C during gas cycling treatment, which may cause long-term degradation of the Sr(0.90)Yb(0.10)CoO(3-δ) electrode. The different polarization behaviors during gas cycling treatment are induced by different sensitivities of the formed surface strontium carbonate and chemisorbed surface oxo-carbonaceous species to different operating temperatures.

electrochemical kinetic↗
NASA NTRS1991

A linear control design structure to maintain loop properties during limit operation in a multi-nozzle turbofan engine

The implementation of multi-variable control systems on turbofan engines requires the use of limit protection to maintain safe engine operation. Since a turbofan engine typically encounters limits during transient operation, the use of a limit protection scheme that modifies the feedback loop may void the desired 'guarantees' associated with linear multi-variable control design methods, necessitating considerable simulation to validate the control with limit protection. An alternative control design structure is proposed that maintains the desired linear feedback properties when certain safety limits are encountered by moving the limit protection scheme outside of the feedback loop. This proposed structure is compared to a structure with a limit protection scheme that modifies the feedback loop properties. The two design structures are compared using both linear and nonlinear simulations. The evaluation emphasizes responses where the fan surge margin limit is encountered.

Mattern, Duane↗
NASA NTRS1992

Design of virtual passive controllers for flexible space structures

The properties of virtual passive controllers, i.e., active vibration absorbers, and of the closed-loop systems achievable by means of such compensation are analyzed. It is shown that these controllers introduce additional transmission zeros into the closed-loop system. Therefore, they provide an extra degree of design freedom over that provided by state feedback, which cannot alter the zeros in any way.

Williams, Trevor↗
NASA NTRS2006

Structural and Radiation Shielding Properties of a Martian Habitat Material Synthesized From In-Situ Resources

The 2 primary requirements of a Martian habitat structure include sufficient structural integrity and effective radiation shielding. In addition, the capability to synthesize such building materials primarily from in-situ resources would significantly reduce the cost associated with transportation of such materials and structures from earth. To demonstrate the feasibility of such an approach we have fabricated samples in the laboratory using simulated in-situ resources, evaluated radiation shielding effectiveness using radiation transport codes and radiation test data, and conducted mechanical properties testing. In this paper we will present experimental results that demonstrate the synthesis of polyethylene from a simulated Martian atmosphere and the fabrication of a composite material using simulated Martian regolith with polyethylene as the binding material. Results from radiation transport calculations and data from laboratory radiation testing using a 500 MeV/nucleon Fe beam will be discussed. Mechanical properties of the proposed composite as a function of composition and processing parameters will also be presented.

Sen, S.↗
NASA NTRS1991

Adaptive Control Of Large Vibrating, Rotating Structures

Globally convergent theoretical method provides for adaptive set-point control of orientation of, along with suppression of the vibrations of, large structure. Method utilizes inherent passivity properties of structure to attain mathematical condition essential to adaptive convergence on commanded set point. Maintains stability and convergence in presence of errors in mathematical model of dynamics of structure and actuators. Developed for controlling attitudes of large, somewhat flexible spacecraft, also useful in such terrestrial applications as controlling movable bridges or suppressing earthquake vibrations in bridges, buildings, and other large structures.

Bayard, David S.↗
NASA NTRS2008

A Brief Introduction to the Theory of Friction Stir Welding

Friction stir welding (FSW) is a solid state welding process invented in 1991 at The Welding Institute in the United Kingdom. A weld is made in the FSW process by translating a rotating pin along a weld seam so as to stir the sides of the seam together. FSW avoids deleterious effects inherent in melting and is already an important welding process for the aerospace industry, where welds of optimal quality are demanded. The structure of welds determines weld properties. The structure of friction stir welds is determined by the flow field in the weld metal in the vicinity of the weld tool. A simple kinematic model of the FSW flow field developed at Marshall Space Flight Center, which enables the basic features of FSW microstructure to be understood and related to weld process parameters and tool design, is explained.

Nunes, Arthur C., Jr.↗
NASA NTRS2012

Algorithms for Determining Physical Responses of Structures Under Load

Ultra-efficient real-time structural monitoring algorithms have been developed to provide extensive information about the physical response of structures under load. These algorithms are driven by actual strain data to measure accurately local strains at multiple locations on the surface of a structure. Through a single point load calibration test, these structural strains are then used to calculate key physical properties of the structure at each measurement location. Such properties include the structure s flexural rigidity (the product of the structure's modulus of elasticity, and its moment of inertia) and the section modulus (the moment of inertia divided by the structure s half-depth). The resulting structural properties at each location can be used to determine the structure s bending moment, shear, and structural loads in real time while the structure is in service. The amount of structural information can be maximized through the use of highly multiplexed fiber Bragg grating technology using optical time domain reflectometry and optical frequency domain reflectometry, which can provide a local strain measurement every 10 mm on a single hair-sized optical fiber. Since local strain is used as input to the algorithms, this system serves multiple purposes of measuring strains and displacements, as well as determining structural bending moment, shear, and loads for assessing real-time structural health. The first step is to install a series of strain sensors on the structure s surface in such a way as to measure bending strains at desired locations. The next step is to perform a simple ground test calibration. For a beam of length l (see example), discretized into n sections and subjected to a tip load of P that places the beam in bending, the flexural rigidity of the beam can be experimentally determined at each measurement location x. The bending moment at each station can then be determined for any general set of loads applied during operation.

Richards, W. Lance↗
NASA NTRSDate not supplied

Mass Mitigation in Structural Designs Via Dynamic Properties

The efforts reported here are focused on mitigating unnecessary mass in aerospace hardware. The approach to remove this undesired mass from the design is to leverage both the dynamic strength of materials and the frequency dependency of strain. Analytically predicted dynamic responses of structures are often applied as static loads in stress analyses that ultimately dictate the weight of a structural design. Assuming a dynamic response is a static load and then comparing resulting stress predictions to a static strength property is a long-standing engineering practice. Doing so is known to be, or is assumed to be, conservative. However, little indication of the order of magnitude of embedded conservatism has been identified. NASA/MSFC efforts in 2011, 2019, 2020, and now in 2021 have begun to qualitatively show the order of magnitude of that conservatism. A quick turnaround engineering method is pursued to leverage the subject facets of physics for the purpose of decreasing the weight of flight hardware. Tests performed using simple beams and significant observations are described.

conservative design loads↗
NASA NTRS1981

Composite structural materials

Physical properties of fiber reinforced composites; structural concepts and analysis; manufacturing; reliability; and life prediction are subjects of research conducted to determine the long term integrity of composite aircraft structures under conditions pertinent to service use. Progress is reported in (1) characterizing homogeneity in composite materials; (2) developing methods for analyzing composite materials; (3) studying fatigue in composite materials; (4) determining the temperature and moisture effects on the mechanical properties of laminates; (5) numerically analyzing moisture effects; (6) numerically analyzing the micromechanics of composite fracture; (7) constructing the 727 elevator attachment rib; (8) developing the L-1011 engine drag strut (CAPCOMP 2 program); (9) analyzing mechanical joints in composites; (10) developing computer software; and (11) processing science and technology, with emphasis on the sailplane project.

Ansell, G. S.↗