Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural anisotropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The influence of kinematics of deformation on polycrystalline halite dynamic recrystallization: Full-field simulation of simple shear versus pure shear

Rock salt, composed mainly of halite, flows viscoplastically over a wide range of geological conditions, strongly impacting the dynamic evolution of sedimentary basins and orogens. Understanding how dislocation creep, which involves dislocation glide, intracrystalline recovery and dynamic recrystallization, influences the microstructure and rheology of halite under various deformation kinematics and temperatures is crucial for enhancing knowledge of salt flow dynamics. Here, this study employs a full-field numerical simulation method to compare the viscoplastic deformation of polycrystalline halite under simple shear and pure shear conditions up to a natural strain of ε = 1.5 at temperatures ranging from 100 °C to 300 °C. The results are presented in terms of crystallographic preferred orientation (CPO), grain shape preferred orientation (SPO), subgrain boundary direction, grain size and strain rate distribution. The results indicate that the crystallographic anisotropy of individual halite crystals is transferred to the polycrystalline scale, resulting in strain localization, particularly in simple shear simulations. The kinematics of deformation affect the evolution and distribution of high strain-rate bands, determining the direction of intragranular substructures and the morphology of strain-induced grain boundaries, with minimal impact on grain size. The intensity of grain boundary migration increases with temperature, significantly influencing grain morphology and size, thereby obscuring strain localization, while having little effect on CPOs. At low strain (ε < 1.0), CPOs relative to both the maximum shortening direction and the grain SPO are similar regardless of the deformation kinematics. At high strain (ε > 1.0), simple shear CPOs exhibit three stronger {100} maxima with a monoclinic symmetry relative to the grain SPO compared to the six {100} maxima with an orthotropic symmetry relative to the grain SPO generated under pure shear. Therefore, microstructures and CPOs can serve as indicators of the strain path in polycrystalline halite under various conditions, aiding in determining the shear sense and elucidating the deformation kinematics of salt structures.

58 GEOSCIENCES↗
DOE OSTI2021

Velocity dispersion and dynamical mass for 270 galaxy clusters in the Planck PSZ1 catalogue

Here, we present the velocity dispersion and dynamical mass estimates for 270 galaxy clusters included in the first Planck Sunyaev-Zeldovich (SZ) source catalogue, the PSZ1. Part of the results presented here were achieved during a two-year observational program, the ITP, developed at the Roque de los Muchachos Observatory (La Palma, Spain). In the ITP we carried out a systematic optical follow-up campaign of all the 212 unidentified PSZ1 sources in the northern sky that have a declination above –15° and are without known counterparts at the time of the publication of the catalogue. We present for the first time the velocity dispersion and dynamical mass of 58 of these ITP PSZ1 clusters, plus 35 newly discovered clusters that are not associated with the PSZ1 catalogue. Using Sloan Digital Sky Survey archival data, we extend this sample, including 212 already confirmed PSZ1 clusters in the northern sky. Using a subset of 207 of these galaxy clusters, we constrained the M SZ –M dyn scaling relation, finding a mass bias of (1 – B) = 0.83 ± 0.07(stat) ± 0.02(sys). We show that this value is consistent with other results in the literature that were obtained with different methods (X-ray, dynamical masses, or weak-lensing mass proxies). This result cannot dissolve the tension between primordial cosmic microwave background anisotropies and cluster number counts in the Ω M –σ 8 plane.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Unraveling peculiar magnetism and band topology in Mn 3 Sb

Magnetic, pseudogap, topological, magnetostructural, and elastic behaviors of Mn 3 Sb have been unraveled. The ferrimagnetism (FIM) is described by localized and delocalized electron magnetism resulting in different magnetic moments on Mn atoms, confirming the neutron diffraction data. The identified magnetostructural properties are due to the non-equivalent Mn atoms in its lowest symmetry structure. The electronic structure is also unique due to variable valance states of Mn atoms. The magnetic moment (4.10 μB) of non-equivalent Mn1 atom is antiparallely aligned with the magnetic moments (2.34 μB) of Mn 2 and Mn 3 atoms. The estimated Curie temperature, TC, is higher than the room temperature, which may have above the room temperature applications in spintronic devices. The band structure and density of states (DOS) show the characteristics of band topology (opening of a gap in Dirac-like band features) and pseudo-gap, respectively, around the Fermi level. While expanding the unit cell, the tetragonal FIM ground state transforms to the cubic primitive FIM phase, however, the contraction transforms it to the L1 2 ferromagnetic (FM) phase. The estimated elastic constants, bulk to shear modulus ratio, and elastic anisotropy factor indicate that Mn3Sb exhibits mechanically stable, ductile, and anisotropic behaviors, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Statistics on magnetic properties of Co compounds: A database-driven method for discovering Co-based ferromagnets

The search for new ferromagnetic compounds is often targeted at known structure families, particularly those containing iron, cobalt, and manganese. Here, we propose a method to expand this search to lesser-known structure types, using a database of experimental Curie and Néel temperatures. This study, in particular, illustrates the case of compounds containing the element cobalt, and we demonstrate how the use of such a database can lead to the discovery of ferromagnetic materials that had previously been overlooked. We report statistics from a literature survey of the magnetic properties of Co-based compounds with more than 33 at. % Co. We classify more than 13 000 compounds by structure type, cobalt content, and magnetic ground state. From these data, compounds TaCo 2 Ga, La 6 Co 13 Bi, and Nd 2 Co 3 were identified as potential ferromagnets, and we confirm their ferromagnetic ordering theoretically via first-principles calculations and experimentally via synthesis and characterization measurements. In addition, the analysis is focused on the collection of data trends and discovery of ferromagnetic materials with easy-axis magnetic anisotropy. Both known ferromagnetic materials with unknown magnetic anisotropy, and unstudied compounds were considered. From the subset of known ferromagnets with unknown anisotropy, the compound Co 2 Mg was synthesized, characterized, and determined to have easy-axis magnetic anisotropy at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding process-microstructure-property relationships in laser powder bed fusion of non-spherical Ti-6Al-4V powder

Powder feedstock is a major cost driver in metal additive manufacturing (AM). Replacing the spherical powder with the cost-efficient non-spherical one can reduce the feedstock cost up to 50% and attract more interest to adopt AM in production and new alloy development. Here, for this paper, a comprehensive study was conducted to understand process-microstructure-property relationships in laser powder bed fusion of hydride-dehydride Ti-6Al-4V powder. We demonstrated that variation of laser scan speed had a significant impact on the grain structure, pore evolution and properties compared to laser power. Dynamic X-ray radiography showed that with decreasing scan speed at a constant laser power, a transition from conduction to keyhole mode laser processing occurred, in which a deeper melt pool at lower scan speed intensified texture. In other words, an increase in laser scan speed resulted in formation of the refined prior β grains with shape factor of ~5, lowering the anisotropy. Furthermore, the degree of variant selection was evaluated based on the analyzed texture as a function of laser power and scan speed. With increasing laser scan speed, the dominant α/α boundary type was altered from type 2 to 4 and the degree of variant selection was noticeably decreased. On the other hand, increasing laser power left the morphology of prior β grains, their size, and the dominant α/α boundary (type 4) unchanged, while the texture and anisotropy were intensified, and the degree of variant selection was slightly decreased. Finally, dependency of surface roughness and microhardness were discussed as a function of laser processing parameters.

variant selection↗
DOE OSTI2026

Relaxor Ferroelectric-Like Spatiotemporal Memory in Field-Driven Lipid Bilayers

Lipid membranes are often regarded as passive barriers, yet their nonlinear dielectric response remains poorly understood. Using all-atom molecular dynamics, we show that fully hydrated dipalmitoylphosphatidylcholine bilayers exhibit relaxor ferroelectric-like behavior under time-dependent electric fields. Unlike crystalline relaxors, which are bipolar and display little remanent polarization, lipid bilayers exhibit a unipolar polarization response: even an alternating current field produces persistent, asymmetric polarization. Furthermore, the underlying free-energy landscape contains two distinct minima, a nonpolarized state and a unipolarly polarized state, between which stochastic thermally activated transitions occur. Directionally resolved Van Hove analysis reveals pronounced anisotropy arising from out-of-plane electric dipole alignment, interleaflet coupling, and lateral polarization domains. Each field cycle nucleates polarization at distinct sites and monitors their relaxation, marking a crossover from thermal fluctuations to field-sustained polarization. Remarkably, these polarized domains persist after field removal, generating long-lived, spatially coherent dipolar patterns that encode nanoscale polarization memory. Potassium chloride amplifies these effects via dielectric screening and a modified hydration structure, enhancing electric dipole flexibility and cooperativity. Together, these results establish protein-free bilayers as nonlinear, history-dependent dielectrics capable of sustaining field-tunable electromechanical coupling, providing an emergent physical foundation for nanoscale information storage and memory phenomena reminiscent of short- and long-term plasticity in soft neuromorphic systems.

Insulators↗
DOE OSTI2021

Orientational Ordering within Semiconducting Polymer Fibrils

Abstract Due to a general paucity of suitable characterization methods, the internal orientational ordering of polymer fibrils has rarely been measured despite its importance particularly for semi‐conducting polymers. An emerging tool with sensitivity to bond orientation is polarized resonant soft X‐ray scattering (P‐RSoXS). Here, P‐RSoXS reveals the molecular arrangement within fibrils (if type I or type II fibrils), the extent of orientation in the fibril crystal, and an explicit crystal‐amorphous interphase. Neat films as well as binary blends with a fullerene derivative are characterized for three different polymers, that are prototypical materials widely used in organic electronics applications. Anisotropic P‐RSoXS patterns reveal two different fibril types. Analysis of the q ‐dependence of the anisotropy from simulated and experimental scattering patterns reveal that neat polymer fibrillar systems likely comprise more than two phases, with the third phase in addition to crystal and amorphous likely being an interphase with distinct density and orientation. Intriguingly, the fibril type correlates to the H‐ or J‐aggregation signature in ultraviolet‐visible (UV–vis) spectroscopy, revealing insight into the fibril formation. Together, the results will open the door to develop more sophisticated structure‐function relationships between chemical design, fibril type, formation pathways and kinetics, interfacial ordering, and eventually device functions.

Mukherjee, Subhrangsu↗
DOE OSTI2022

Ultrafast optical control of surface and bulk magnetism in magnetic topological insulator/antiferromagnet heterostructure

Abstract Optical control of the magnetic properties in topological insulator systems is an important step in applying these materials in ultrafast optoelectronic and spintronic schemes. In this work, we report the experimental observation of photo-induced magnetization dynamics in the magnetically doped topological insulator (MTI)/antiferromagnet (AFM) heterostructure composed of Cr-(Bi,Sb) 2 Te 3 /CrSb. Through proximity coupling to the AFM layer, the MTI displays a dramatically enhanced magnetism, with robust perpendicular magnetic anisotropy. When subjected to intense laser irradiation, both surface and bulk magnetism of the MTI are weakened by laser-induced heating of the lattice, however, at the surface, the deleterious heat effect is compensated by the strengthening of Dirac-hole-mediated exchange coupling as demonstrated by an unconventional pump-fluence-dependent exchange-bias effect. Through theoretical analyses, the sizes of exchange coupling energies are estimated in the MTI/AFM bilayer structure. The fundamentally different mechanisms supporting the surface and bulk magnetic order in MTIs allow a novel and distinctive photo-induced transient magnetic state with antiparallel spin configuration, which broadens the understanding of the magnetization dynamics of MTIs under ultrashort and intense optical excitation.

42 ENGINEERING↗
DOE OSTI2024

Fabrication of single-crystalline YFeO3 films with large antiferromagnetic domains

The antiferromagnetic orthoferrite YFeO3 possesses fascinating magnetic properties for spintronics, such as terahertz spin dynamics, ultrafast domain wall motion, and long magnon decay length. YFeO3 belongs to a special family of antiferromagnets that show an unusually strong non-trivial Kerr response due to its weak ferromagnetism. The highly stable antiferromagnetic domains without any spontaneous spin rotation transitions below the 645 K Néel temperature may be useful for nanoscale device applications. We report the successful fabrication of high-quality twinning-free (110)-oriented YFeO3 films by pulsed laser deposition. Detailed structural and magnetic characterization revealed that the crystal structure and magnetic properties of the YFeO3 films are comparable to bulk single crystals. We show that the spin rotation under high magnetic fields follows the two-sublattice approximation model. The film surface is atomically flat with step-terrace surface morphology. A longitudinal magneto-optic Kerr (MOKE) rotation of 10 mdeg was observed at room temperature, which is consistent with earlier reports on bulk single crystals. The in-plane anisotropy of the Kerr response corresponds to the obtained magnetic anisotropy from the SQUID measurement. The large MOKE signal enables the imaging of antiferromagnetic domains and their reversal. The domain size was found to be larger than 100 μm. These high-quality YFeO3 thin films facilitate the fabrication of antiferromagnetic spintronic devices and provide a convenient platform for studying various spin-related phenomena in thin films and at interfaces.

Physics↗
DOE OSTI2023

Frustrated magnetic cycloidal structure and emergent Potts nematicity in CaMn 2 P 2

We report neutron-diffraction results on single-crystal CaMn 2 P 2 containing corrugated Mn honeycomb layers, and we determine its ground-state magnetic structure. The diffraction patterns consist of prominent (1/6,1/6, L ) reciprocal-lattice unit (r.l.u.; L = integer) magnetic Bragg reflections, whose temperature-dependent intensities are consistent with a first-order antiferromagnetic phase transition at the Néel temperature T N = 70 (1) K. Our analysis of the diffraction patterns reveals an in-plane 6 × 6 magnetic unit cell with ordered spins that in the principal-axis directions rotate by 60°steps between nearest neighbors on each sublattice that forms the honeycomb structure, consistent with the P A c magnetic space group. We find that a few other magnetic subgroup symmetries (P A 2 /c, P C 2/m, P S 1, P C 2, P C m, P S 1) of the paramagnetic $P\bar{3}m11'$ crystal symmetry are consistent with the observed diffraction pattern. We relate our findings to frustrated J 1 -J 2 -J 3 Heisenberg honeycomb antiferromagnets with single-ion anisotropy and the emergence of Potts nematicity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Electrical conductivity of a warm neutron star crust in magnetic fields: Neutron-drip regime

We compute the anisotropic electrical conductivity tensor of the inner crust of a compact star at nonzero temperature by extending a previous work on the conductivity of the outer crust. The physical scenarios, where such crust is formed, involve protoneutron stars born in supernova explosions, binary neutron star mergers, and accreting neutron stars. The temperature-density range studied covers the transition from a semidegenerate to a highly degenerate electron gas and assumes that the nuclei form a liquid, i.e., the temperature is above the melting temperature of the lattice of nuclei. The electronic transition probabilities include (i) the screening of electron-ion interaction in the hard-thermal-loop approximation for the QED plasma, (ii) the correlations of the ionic component in a one-component plasma, and (iii) finite nuclear size effects. The conductivity tensor is obtained from the Boltzmann kinetic equation in relaxation time approximation accounting for the anisotropy introduced by a magnetic field. The sensitivity of the results towards the matter composition of the inner crust is explored by using several compositions of the inner crust, which were obtained using different nuclear interactions and methods of solving the many-body problem. The standard deviations of relaxation time and components of the conductivity tensor from the average are below ≤25% except close to crust-core transition, where nonspherical nuclear structures are expected. Finally, our results can be used in dissipative magnetohydrodynamics simulations of warm compact stars.

Physics↗
DOE OSTI2021

Antiferro- and metamagnetism in the S = 7 / 2 hollandite analog Eu Ga 2 Sb 2

Recent work analyzing the impact of nonsymmorphic symmetries on electronic states has given rise to the discovery of multiple types of topological matter. Here we report the single-crystal synthesis and magnetic properties of Eu Ga 2 Sb 2 , a Eu-based antiferromagnet structurally consisting of pseudo-1D chains of Eu ions related by a nonsymmorphic glide plane. Here we find the onset of antiferromagnetic order at T N = 8K. Above T N the magnetic susceptibility is isotropic. Curie-Weiss analysis suggests competing ferromagnetic and antiferromagnetic interactions, with p eff = 8.1 μ B as expected for 4f 7 J = S = 7/2 Eu 2+ ions. Below T N and at low applied magnetic fields, an anisotropy develops linearly, reaching χ ⊥ /χ ∥ = 6 at T = 2K. There is concomitant metamagnetic behavior along χ ∥ , with a magnetic field of μ 0 H ≈ 0.5 T sufficient to suppress the anisotropy. Independent of crystal orientation, there is a continuous evolution to a field-polarized paramagnetic state with M = 7μ B /Eu 2+ at μ 0 H = 2 T as T → 0 K. Specific-heat measurements show a recovered magnetic entropy of ΔS mag ≈ 16.4 Jmol –1 K –1 from T ~ 0 K to T = T N , close to the expected value of R ln(8) for an S = 7/2 ion, indicating negligible low-dimensional spin fluctuations above T N . We find no evidence of unusual behaviors arising either from the dimensionality or the presence of the nonsymmorphic symmetries.

1-dimensional spin chains↗
DOE OSTI2021

Magnetism in metastable and annealed compositionally complex alloys

Compositionally complex materials (CCMs) present a potential paradigm shift in the design of magnetic materials. These alloys exhibit long-range structural order coupled with limited or no chemical order. As a result, extreme local environments exist with a large variations in the magnetic energy terms, which can manifest large changes in the magnetic behavior. In the current work, the magnetic properties of (Cr, Mn, Fe, Ni) alloys are presented. These materials were prepared by room-temperature combinatorial sputtering, resulting in a range of compositions with a single bcc structural phase and no chemical ordering. The combinatorial growth technique allows CCMs to be prepared outside of their thermodynamically stable phase, enabling the exploration of otherwise inaccessible order. The mixed ferromagnetic and antiferromagnetic interactions in these alloys causes frustrated magnetic behavior, which results in an extremely low coercivity (<1mT), which increases rapidly at 50 K. At low temperatures, the coercivity achieves values of nearly 500 mT, which is comparable to some high-anisotropy magnetic materials. Further, commensurate with the divergent coercivity is an atypical drop in the temperature dependent magnetization. These effects are explained by a mixed magnetic phase model, consisting of ferro-, antiferro-, and frustrated magnetic regions, and are rationalized by simulations. A machine-learning algorithm is employed to visualize the parameter space and inform the development of subsequent compositions. Annealing the samples at 600 °C orders the sample, more-than doubling the Curie temperature and increasing the saturation magnetization by as much as 5×. Simultaneously, the large coercivities are suppressed, resulting in magnetic behavior that is largely temperature independent over a range of 350 K. The ability to transform from a hard magnet to a soft magnet over a narrow temperature range makes these materials promising for heat-assisted recording technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning Perovskites’ Hydration-Induced Chemical Expansion with Octahedral Tilt Angles

Hydration-induced strains in proton-conducting oxides compromise chemo-mechanical stability when these materials are applied in protonic ceramic electrochemical cells. Here, to develop design principles for zero-strain materials, we systematically studied the hydration coefficients of chemical expansion (CCEs) in perovskite (Sr, Ba)(Ce, Zr, Y)O 3–x solid solutions with in situ dilatometry and thermogravimetric analysis in the range of 430–630 °C. By including and decoupling a wide range of tolerance factors and lattice parameters, we were able to identify a minimum in hydration CCEs (0–0.02) at intermediate tolerance factor values (t ≈ 0.95). Conversely, despite expectations of lower CCEs in larger unit cells, no general trend in CCE versus lattice parameter was found, and opposite trends could be seen for Sr(Ce, Zr, Y)O 3–x versus Ba(Ce, Zr, Y)O 3–x separately. In situ neutron diffraction (ND) enabled atomistic insight. Upon decreasing t, chemical strain anisotropy increased, but this trend did not match the U-shaped dependence of macroscopic CCEs on t. Instead, perovskites with intermediate t, hosting intermediate octahedral tilt angles in the nominally dry state, underwent the largest change in the B–O–B angles during hydration. Accommodating hydration through decreasing B–O–B angles is beneficial because it does not result in large lattice parameter changes. We propose an intermediate tolerance factor as a simple structural descriptor to enable near-zero hydration strains in proton-conducting perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Confined magnons

Magnetic structures are known to possess magnon excitations confined to their surfaces and interfaces, but these spatially localized modes are often not resolved in spectroscopy experiments. In this work, we develop a theory to calculate the confined magnon spectra and its associated spin scattering function, which is the physical observable in neutron and electron scattering, and a proxy for photon spectroscopy based on x-ray, Raman, and terahertz (THz) sources. We show that extra anisotropy at the surface or interface plays a key role in magnon confinement. We obtain analytical expressions for the confinement length scale and show that it is qualitatively similar for ferromagnets and antiferromagnets in dimension d≥2. For d=1, we find remarkable differences between ferromagnetic and antiferromagnetic models. The theory indicates the presence of several confined magnon resonances in addition to the usual magnons thought to explain the excitations of magnetic nanostructures. Detecting these modes may elucidate the impact of the interface on spin anisotropy and magnetic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Proton-detected 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment for the measurement of NH distances in biological solids under fast MAS solid-state NMR

Measurement of distances from dipolar couplings is essential for structural characterization, refinement and validation using the solid-state nuclear magnetic resonance (ssNMR) spectroscopy. Particularly, knowledge about NH dipolar interactions in biological solids is important for understanding the hydrogen (H)-bonding interactions, molecular geometry and spin dynamics. In this regard, we have proposed a proton-detected two-dimensional (2D) 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment using the C-symmetry based windowless recoupling of chemical shift anisotropy (ROCSA) in combination with the DIPSHIFT pulse-based method for the measurement of short NH distances in the isotopically labeled and naturally abundant biological solids at fast magic angle spinning (MAS) rates (40–70 kHz). Our proposed method results in undistorted recoupled 15 N- 1 H dipolar coupling powder lineshapes that are free from the recoupled 1 H CSA contributions under the 15 N evolution, a feature that is essential for the measurement of NH distances with improved accuracy (± 500 Hz in terms of the NH dipolar couplings). The pulse sequence developed in the present study is also insensitive to the 1H–1H homonuclear dipolar interactions, relaxation effects owing to its constant-time implementation, and t1-noise from the fluctuations in the MAS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Assessment of minnealloy fabrication via three routes

Transformer cores exhibiting higher operating power and improved efficiency are of great interest to electrical utilities, industry, and the de-carbonization effort. Minnealloy, α″-Fe16(C,N)2, a martensite made only of iron, nitrogen, and carbon, has shown the largest saturation magnetization of any soft ferromagnet, 250 emu/g, and tunable magnetocrystalline anisotropy. Given this represents a significant increase in power transferred per cycle compared to legacy transformer core materials, we investigate three novel, industrially scalable routes for fabricating Minnealloy. The martensite phase content is investigated for each route. Vibrating sample magnetometry is used to investigate the change in saturation magnetization and coercivity with respect to the relative content of the desired phase and other iron, iron-nitride, and iron oxide phase impurities. The relationship between structure and magnetic properties of bulk α″-Fe16(C,N)2 is investigated using LDA, PBE, and PBEsol exchange-correlation functionals within the frameworks of Hubbard-corrected density functional theory (DFT+U).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of dose rate on the microstructure and deuterium retention in γ-LiAlO 2 pellets

This report presents experimental findings obtained from November 2024 to September 2025. Defect accumulation and microstructural evolution during ion irradiation at elevated temperatures are governed by two competing processes: defect production, driven by dose rate, and defect recovery, controlled by defect diffusion, interaction, and annihilation. At a given dose, the resulting microstructural evolution depends on both the dose rate and irradiation temperature. As a continuation of our FY24 tritium science project, which investigated temperature effects at a fixed dose rate, this study focuses on dose-rate effects at a fixed temperature to provide deeper insights into the irradiated microstructure and compositional changes in γ-LiAlO 2 pellets. The study aims to elucidate the impact of dose rate on microstructure, precipitate morphology, deuterium retention, and lithium volatility in γ-LiAlO 2 pellets under sequential 120 keV He + and 80 keV D 2 + ion irradiation. Three dose rates of 7.3×10 4 , 2.9×10 4 and 6.8×10 5 dpa/s were applied to achieve the same total ion fluence of 2×10 17 (He + +D + )/cm 2 at 500 °C, corresponding to a maximum combined dose of 7.55 dpa at ~255 nm. The irradiated pellets were subsequently characterized using scanning transmission electron microscopy (STEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The microstructural response of γ-LiAlO 2 to ion irradiation was found to be strongly dose-rate dependent. At medium and high dose rates, irradiation produced a surface amorphized layer and an underlying crystalline layer containing LiAl 5 O 8 precipitates, with implanted gases accumulating and forming blisters at the crystalline-amorphous interface. It remains to be investigated whether the amorphized layer was produced by He + ion irradiation prior to D 2 + ion irradiation. In contrast, at low dose rates, the material remained crystalline, with cavities, likely gas-filled, distributed around precipitates, within the γ-LiAlO 2 matrix, and along grain boundaries. While precipitate morphology exhibited anisotropy, their size showed little sensitivity to dose rate in the applied range of this study. This result, however, does not rule out the possibility that further reductions in dose rate could influence precipitate size. High dose-rate irradiation enhanced protonium–deuterium isotopic exchange and lithium depletion in the amorphized region. Collectively, the results show that dose rate governs amorphization, gas redistribution, isotopic exchange, and lithium depletion, providing important insights into the mechanisms underlying structural evolution in γ-LiAlO 2 pellets under reactor-relevant irradiation conditions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗