Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stokes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Numerical solutions of three-dimensional Navier-Stokes equations for closed-bluff bodies

Methods of grid adaption are reviewed and a method is developed with the capability of adaption to several flow variables. This method is based on a variational approach and is an algebraic method which does not require the solution of partial differential equations. The method has also been formulated in such a way that there is no need for any matrix inversion. The method is used in conjunction with the calculation of hypersonic flow over a blunt nose. The equations of motion are the compressible Navier-Stokes equations where all viscous terms are retained. They are solved by the MacCormack time-splitting method and a movie has been produced which shows simultaneously the transient behavior of the solution and the grid adaption. The results are compared with the experimental and other numerical results.

Abolhassani, Jamshid S.↗
NASA NTRS1988

Navier-Stokes simulation of wind-tunnel flow using LU-ADI factorization algorithm

The three dimensional Navier-Stokes solution code using the LU-ADI factorization algorithm was employed to simulate the workshop test cases of transonic flow past a wing model in a wind tunnel and in free air. The effect of the tunnel walls is well demonstrated by the present simulations. An Amdahl 1200 supercomputer having 128 Mbytes main memory was used for these computations.

Obayashi, Shigeru↗
NASA NTRS1987

Evaluation of a research circulation control airfoil using Navier-Stokes methods

The compressible Reynolds time averaged Navier-Stokes equations were used to obtain solutions for flows about a two dimensional circulation control airfoil. The governing equations were written in conservation form for a body-fitted coordinate system and solved using an Alternating Direction Implicit (ADI) procedure. A modified algebraic eddy viscosity model was used to define the turbulent characteristics of the flow, including the wall jet flow over the Coanda surface at the trailing edge. Numerical results are compared to experimental data obtained for a research circulation control airfoil geometry. Excellent agreement with the experimental results was obtained.

Shrewsbury, George D.↗
NASA NTRS1988

A visual programming environment for the Navier-Stokes computer

The Navier-Stokes computer is a high-performance, reconfigurable, pipelined machine designed to solve large computational fluid dynamics problems. Due to the complexity of the architecture, development of effective, high-level language compilers for the system appears to be a very difficult task. Consequently, a visual programming methodology has been developed which allows users to program the system at an architectural level by constructing diagrams of the pipeline configuration. These schematic program representations can then be checked for validity and automatically translated into machine code. The visual environment is illustrated by using a prototype graphical editor to program an example problem.

Tomboulian, Sherryl↗
NASA NTRS1988

On the smallest scale for the incompressible Navier-Stokes equations

It is proven that for solutions to the two- and three-dimensional incompressible Navier-Stokes equations the minimum scale is inversely proportional to the square root of the Reynolds number based on the kinematic viscosity and the maximum of the velocity gradients. The bounds on the velocity gradients can be obtained for two-dimensional flows, but have to be assumed to be three-dimensional. Numerical results in two dimensions are given which illustrate and substantiate the features of the proof. Implications of the minimum scale result to the decay rate of the energy spectrum are discussed.

Henshaw, W. D.↗
NASA NTRS1988

Three-dimensional incompressible Navier-Stokes computations of internal flows

Several incompressible Navier-Stokes solution methods for obtaining steady and unsteady solutions are discussed. Special attention is given to internal flows which involve distinctly different features from external flows. The characterisitcs of the flow solvers employing the method of pseudocompressibility and a fractional step method are briefly described. This discussion is limited to a primitive variable formulation in generalized curvilinear coordinates. Computed results include simple test cases and internal flow in the Space Shuttle main engine hot-gas manifold.

Kwak, D.↗
NASA NTRS1988

Transonic Navier-Stokes computations of strake-generated vortex interactions for a fighter-like configuration

Transonic Euler/Navier-Stokes computations are accomplished for wing-body flow fields using a computer program called Transonic Navier-Stokes (TNS). The wing-body grids are generated using a program called ZONER, which subdivides a coarse grid about a fighter-like aircraft configuration into smaller zones, which are tailored to local grid requirements. These zones can be either finely clustered for capture of viscous effects, or coarsely clustered for inviscid portions of the flow field. Different equation sets may be solved in the different zone types. This modular approach also affords the opportunity to modify a local region of the grid without recomputing the global grid. This capability speeds up the design optimization process when quick modifications to the geometry definition are desired. The solution algorithm embodied in TNS is implicit, and is capable of capturing pressure gradients associated with shocks. The algebraic turbulence model employed has proven adequate for viscous interactions with moderate separation. Results confirm that the TNS program can successfully be used to simulate transonic viscous flows about complicated 3-D geometries.

Reznick, Steve↗
NASA NTRS1988

Application of Navier-Stokes analysis to stall flutter

A solution procedure was developed to investigate the two-dimensional, one- or two-dimensional flutter characteristics of arbitrary airfoils. This procedure requires a simultaneous integration in time of the solid and fluid equations of motion. The fluid equations of motion are the unsteady compressible Navier-Stokes equations, solved in a body-fitted moving coordinate system using an approximate factorization scheme. The solid equations of motion are integrated in time using an Euler implicit scheme. Flutter is said to occur if small disturbances imposed on the airfoil attitude lead to divergent oscillatory motions at subsequent times. The flutter characteristics of airfoils in subsonic speed at high angles of attack and airfoils in high subsonic and transonic speeds at low angles of attack are investigated. The stall flutter characteristics are also predicted using the same procedure.

Wu, J. C.↗
NASA NTRS1988

Numerical solutions of the complete Navier-Stokes equations

The physical phenomena within supersonic flows that sustain chemical reactions are investigated. An earlier study to develop accurate physical models for supersonic reacting flowfields focused on 2-D laminar shear layers. The objective is to examine the mixing and subsequent combustion within turbulent reacting shear layers. To conduct this study, a computer program has been written to solve the axisymmetric Reynolds averaged Navier-Stokes equations. The numerical method uses a cell-centered finite volume approach and a Runge Kutta time stepping scheme. The Reynolds averaged equations are closed using the eddy viscosity concept. Several zero-equation models have been tested by making calculations for an H2-air nonreacting coaxial jet flow. Comparisons made with experimental data show that Cohen's eddy viscosity model provides best agreement. The finite rate chemistry model used in the study of 2-D laminar shear layers is incorporated into the computer program and data is compared from a recent experiment performed at NASA Langley.

Hassan, H. A.↗
NASA NTRS1988

A Navier-Stokes solver for cascade flows

A computer code for solving the Reynolds averaged full Navier-Stokes equations has been developed and applied using sheared H-type grids. The Baldwin-Lomax eddy-viscosity model is used for turbulence closure. The integration in time is based on an explicit four-stage Runge-Kutta scheme. Local time stepping, variable coefficient implicit residual smoothing, and a full multigrid method have been implemented to accelerate steady state calculations. Comparisons with experimental data show that the code is an accurate viscous solver and can give very good blade-to-blade predictions for engineering applications in less than 100 multigrid cycles on the finest mesh.

Arnone, A.↗
NASA NTRS1988

Navier-Stokes calculations of transonic flows past cavities

A computational investigation of subsonic and transonic flows past three dimensional deep and transitional cavities is presented. Computational simulations of these self induced oscillatory flows were generated through time accurate solutions of the Reynolds averaged full Navier-Stokes equations, using the explicit MacCormack scheme. The Reynolds stresses were included through the Baldwin-Lomax algebraic turbulence model with certain modifications. Two cases were computed to demonstrate the capability of the numerical scheme in modeling the complex three dimensional flow features inside a cavity. The results from an experimental investigation were used not only to benchmark the computations, but also to widen the database used for the discussions and conclusions. The computational results include instantaneous and time averaged flow properties everywhere in the computational zone. Time series analyses were performed for the instantaneous pressure values on the cavity floor. The features of deep and transitional cavity flows, and the effects of the sidewall on the cavity flow flowfield are illustrated through computational graphics.

Baysal, Oktay↗
NASA NTRS1988

Three-dimensional Navier-Stokes simulations of turbine rotor-stator interaction

Fluid flows within turbomachinery tend to be extremely complex in nature. Understanding such flows is crucial to improving current designs of turbomachinery. The computational approach can be used to great advantage in understanding flows in turbomachinery. A finite difference, unsteady, thin layer, Navier-Stokes approach to calculating the flow within an axial turbine stage is presented. The relative motion between the stator and rotor airfoils is made possible with the use of patched grids that move relative to each other. The calculation includes endwall and tip leakage effects. An introduction to the rotor-stator problem and sample results in the form of time averaged surface pressures are presented. The numerical data are compared with experimental data and the agreement between the two is found to be good.

Rai, Man Mohan↗
NASA NTRS1988

A streamwise upwind algorithm for the Euler and Navier-Stokes equations applied to transonic flows

A new algorithm was developed for the Euler and Navier-Stokes equations that uses upwind differencing based on the streawise direction. This algorithm is time accurate and can be used in codes for calculating unsteady transonic flows over wings. Such codes can be used for the flutter analysis of wings. In this algorithm, the coordinate system is locally rotated to align with the streamwise direction. For differencing the convective terms in the streamwise direction, a new form of flux splitting is employed, in which the biasing depends on the local Mach number. In the plane perpendicular to the stream direction, the new flux splitting uses the condition of no flow in that local plane. By using a locally rotated coordinate system, the convective flux vector biasing depends on the total Mach number. Hence, the switching of the flux vector biasing occurs across shock waves and the proper domain of dependence is used in supersonic regions. For comparison, many other upwind methods switch differencing based on Mach number of shock waves in multidimensional flows. The formulas for the convective flux vector differencing do not contain any user specified parameters. So, the amount of numerical dissipation is automatically determined.

Goorjian, Peter M.↗
NASA NTRS1987

Performance of a three-dimensional Navier-Stokes code on CYBER 205 for high-speed juncture flows

A vectorized 3D Navier-Stokes code has been implemented on CYBER 205 for solving the supersonic laminar flow over a swept fin/flat plate junction. The code extends MacCormack's predictor-corrector finite volume scheme to a generalized coordinate system in a locally one dimensional time split fashion. A systematic parametric study is conducted to examine the effect of fin sweep on the computed flow field. Calculated results for the pressure distribution on the flat plate and fin leading edge are compared with the experimental measurements of a right angle blunt fin/flat plate junction. The decrease in the extent of the separated flow region and peak pressure on the fin leading edge, and weakening of the two reversed supersonic zones with increase in fin sweep have been clearly observed in the numerical simulation.

Lakshmanan, B.↗
NASA NTRS1987

Analysis of unsteady wake of a circular cylinder using Navier-Stokes equations

An unsteady Navier-Stokes analysis of the separated flow in the wake of a circular cylinder is presented in order to study the wake structure and the various interactions between its scales at low Re. The quasi-periodic and chaotic flows noted by Sreenivasan (1985) are searched for. The analysis is used to characterize the secondary vortex formation in the early stages of the flow development and its interaction with the primary vortex.

Ghia, K. N.↗
NASA NTRS1987

Numerical solution of the Navier-Stokes equations with emphasis on rotorcraft applications

Recent advances in CFD are surveyed, with a focus on the applicability of codes based on the Navier-Stokes (NS) equations to helicopter aerodynamics. The developmental history of two- and three-dimensional NS codes is recalled; the formulations employed by codes of increasing complexity are outlined; and previous reviews are noted. Particular attention is given to Reynolds-averaged NS methods and their use in analyzing subsonic, transonic, and vortex-dominated flows. Typical numerical results are compared with experimental data in diagrams and graphs, and a number of outstanding problems are considered.

Holst, Terry L.↗
NASA NTRS1987

Recent progress in the development and understanding of SUPG methods with special reference to the compressible Euler and Navier-Stokes equations

The current status of streamline-upwind/Petrov-Galerkin (SUPG) methods for the analysis of flow problems is surveyed in an analytical review. Problem areas addressed include classical Galerkin, upwind, artificial-diffusion, SUPG, discontinuous Galerkin, space-time FEM, and discontinuity-capturing approaches to the scalar advection-diffusion equation; incompressible flows; advective-diffusive systems; and the compressible Euler and Navier-Stokes equations. Graphs and diagrams are provided, and the good stability properties of state-of-the-art SUPG methods are pointed out.

Hughes, Thomas J. R.↗
NASA NTRS1988

Navier-Stokes solutions for transonic flow over a wing mounted in a tunnel

Three-dimensional viscous flow calculations are performed for a swept, NACA 0012 wing mounted inside a wind tunnel for which detailed experimental data is available. A Runge-Kutta time-stepping scheme is used for obtaining steady-state solutions to the thin-layer Navier-Stokes equations. Free-air comptuations are also performed to assess the wall-interference effects. The effects of grid density and artificial dissipation on the accuracy of numerical results are included. The effect of the wind-tunnel sidewall boundary layer on the flow pattern over the wing surface, particularly in the vicinity of the wing/wall juncture is found to be significant.

Vatsa, V. N.↗