Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “State functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Vortex Lattices in Active Nematics with Periodic Obstacle Arrays

Here, we numerically model a two-dimensional active nematic confined by a periodic array of fixed obstacles. Even in the passive nematic, the appearance of topological defects is unavoidable due to planar anchoring by the obstacle surfaces. We show that a vortex lattice state emerges as activity is increased, and that this lattice may be tuned from “ferromagnetic” to “antiferromagnetic” by varying the gap size between obstacles. We map the rich variety of states exhibited by the system as a function of distance between obstacles and activity, including a pinned defect state, motile defects, the vortex lattice, and active turbulence. We demonstrate that the flows in the active turbulent phase can be tuned by the presence of obstacles, and explore the effects of a frustrated lattice geometry on the vortex lattice phase.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Forecasting Solar-Thermal Systems Performance under Transient Operation Using a Data-Driven Machine Learning Approach Based on the Deep Operator Network Architecture

Modeling and prediction of the dynamic behavior of thermal systems operating under intermittent energy input and variable load requirements represent one of the greatest challenges in the development of efficient and reliable renewable-based power generation technologies. In this work, a data-driven machine learning modeling framework was developed based on a modified version of the Deep Operator Network architecture where the time coordinate in the trunk net is replaced with historical data of the predicting quantity. The modeling framework can be used to accurately predict the performance of renewable-based energy conversion technologies including wind- and solar-based power plants. This novel framework was applied on a solar-thermal system that consists of a solar collection loop using a flat plate collector, a power generation loop comprising an Organic Rankine Cycle, and a thermal energy storage tank connecting both loops. Variable solar irradiance, air temperature, and power load profiles were used by the Deep Operator Network to predict the State-of-Charge and the efficiency of the thermal system for several days. The results were compared with the State-of-Charge and efficiency functions calculated using a physics-based model. For a simple operation scenario, characterized by a clear sky solar irradiance profile and constant load, the standard deviation in the State-of-Charge prediction by Deep Operator Network is below 0.9% during a seven-day prediction time horizon. For the most realistic operation scenario that considers real solar irradiance and a rough load profile, the maximum standard deviation in the predictions for the State-of-Charge and efficiency are below 6.8% and 2.5%, respectively. A comparison between Deep Operator Network and Long Short Term Memory network was also performed. In general, both networks predict very well the State-of-Charge for different data density conditions; however, a higher accuracy, with a standard deviation below 2.0%, is obtained by the Deep Operator Network during three and half days using sparser training data of 20-minute points. The same accuracy for the State-of-Charge prediction with the Long Short Term Memory network is achieved only for 14 h. Average standard deviations for the State-of-Charge prediction of 1.1% with the Deep Operator Network and 1.5% with the Long Short Term Memory network are obtained for a four-day prediction time using a denser training data of 5-minute points.

DeepONet↗
DOE OSTI2020

Covariant density functional theory input for r-process simulations in actinides and superheavy nuclei: The ground state and fission properties

A systematic investigation of the ground-state and fission properties of even-even actinides and superheavy nuclei with Z = 90–120 from the two-proton up to two-neutron drip lines with proper assessment of systematic theoretical uncertainties has been performed for the first time in the framework of covariant density functional theory (CDFT). Furthermore, these results provide a necessary theoretical input for the r-process modeling in heavy nuclei and, in particular, for the study of fission cycling. Four state-of-the-art globally tested covariant energy density functionals (CEDFs), namely, DD-PC1, DD-ME2, NL3*, and PC-PK1, representing the major classes of the CDFT models are employed in the present paper. Ground-state deformations, binding energies, two-neutron separation energies, α-decay Q α values and half-lives, and the heights of fission barriers have been calculated for all these nuclei. Theoretical uncertainties in these physical observables and their evolution as a function of proton and neutron numbers have been quantified and their major sources have been identified. Spherical shell closures at Z = 120, N = 184, and N = 258 and the structure of the single-particle (especially, high-j) states in their vicinities as well as nuclear matter properties of employed CEDFs are two major factors contributing to theoretical uncertainties. However, different physical observables are affected in a different way by these two factors. For example, theoretical uncertainties in calculated ground-state deformations are affected mostly by the former factor, while theoretical uncertainties in fission barriers depend on both of these factors.

190 ≤ A ≤ 219↗
DOE OSTI2024

Quasiparton distributions in massive QED2: Toward quantum computation

We analyze the quasiparton distributions of the lightest 𝜂′ meson in massive two-dimensional quantum electrodynamics (QED2) by exact diagonalization. The Hamiltonian and boost operators are mapped onto spin qubits in a spatial lattice with open boundary conditions. The lowest excited state in the exact diagonalization is shown to interpolate continuously between an anomalous 𝜂′ state at strong coupling, and a nonanomalous heavy meson at weak coupling, with a cusp at the critical point. The boosted 𝜂′ state follows relativistic kinematics but with large deviations in the luminal limit. The spatial quasiparton distribution function and amplitude for the 𝜂′ state are computed numerically for increasing rapidity both at strong and weak coupling, and compared to the exact light front results. The numerical results from the boosted form of the spatial parton distributions, compare fairly with the inverse Fourier transformation of the luminal parton distributions, derived in the lowest Fock space approximation. Our analysis points out some of the limitations facing the current lattice program for the parton distributions.

Lattice field theory↗
DOE OSTI2021

Development and Refinement of DER Steady State Model for QSTS Analysis

EPRI formed a working group of utilities and software vendors called the Distribution Advanced PV Model Working Group (DAWG). The working group has been focused on building consensus regarding the models that represent the reactive power capabilities outlined in Section 5 of IEEE Std 1547™-2018. This report provides an overview of the reactive and active power capabilities specified in IEEE Std 1547™-2018 and outlines a specification of key functions for usage during steady state snapshot and time series power flow analysis. Additionally, it presents a framework for performing tests to verify the correct operation of functions during power flow analysis.

14 SOLAR ENERGY↗
DOE OSTI2023

Properties of carbon up to 10 million kelvin from Kohn-Sham density functional theory molecular dynamics

Accurately modeling dense plasmas over wide-ranging conditions of pressure and temperature is a grand challenge critically important to our understanding of stellar and planetary physics as well as inertial confinement fusion. In this work, we employ Kohn-Sham density functional theory (DFT) molecular dynamics (MD) to compute the properties of carbon at warm and hot dense matter conditions in the vicinity of the principal Hugoniot. In particular, we calculate the equation of state (EOS), Hugoniot, pair distribution functions, and diffusion coefficients for carbon at densities spanning 8 g/$\mathrm{cm^3}$ to 16 g/$\mathrm{cm^3}$ and temperatures ranging from 100 kK to 10 MK using the Spectral Quadrature method. Here, we find that the computed EOS and Hugoniot are in good agreement with path integral Monte Carlo results and the sesame database. Additionally, we calculate the ion-ion structure factor and viscosity for selected points. All results presented are at the level of full Kohn-Sham DFT-MD, free of empirical parameters, average-atom, and orbital-free approximations employed previously at such conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Computing x-ray absorption spectra from linear-response particles atop optimized holes

State specific orbital optimized density functional theory (OO-DFT) methods, such as restricted open-shell Kohn–Sham (ROKS), can attain semiquantitative accuracy for predicting x-ray absorption spectra of closed-shell molecules. OO-DFT methods, however, require that each state be individually optimized. In this Communication, we present an approach to generate an approximate core-excited state density for use with the ROKS energy ansatz, which is capable of giving reasonable accuracy without requiring state-specific optimization. Herein, this is achieved by fully optimizing the core-hole through the core-ionized state, followed by the use of electron-addition configuration interaction singles to obtain the particle level. This hybrid approach can be viewed as a DFT generalization of the static-exchange (STEX) method and can attain ~0.6 eV rms error for the K-edges of C–F through the use of local functionals, such as PBE and OLYP. This ROKS(STEX) approach can also be used to identify important transitions for full OO ROKS treatment and can thus help reduce the computational cost of obtaining OO-DFT quality spectra. ROKS(STEX), therefore, appears to be a useful technique for the efficient prediction of x-ray absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cu–Ni Oxidation Mechanism Unveiled: A Machine Learning-Accelerated First-Principles and in Situ TEM Study

Here, the development of accurate methods for determining how alloy surfaces spontaneously restructure under reactive and corrosive environments is a key, long-standing, grand challenge in materials science. Using machine learning-accelerated density functional theory and rare-event methods, in conjunction with in situ environmental transmission electron microscopy (ETEM), we examine the interplay between surface reconstructions and preferential segregation tendencies of CuNi(100) surfaces under oxidation conditions. Our modeling approach predicts that oxygen-induced Ni segregation in CuNi alloys favors Cu(100)-O c(2 × 2) reconstruction and destabilizes the Cu(100)-O (2√2 × √2)R45° missing row reconstruction (MRR). In situ ETEM experiments validate these predictions and show Ni segregation followed by NiO nucleation and growth in regions without MRR, with secondary nucleation and growth of Cu 2 O in MRR regions. Our approach based on combining disparate computational components and in situ ETEM provides a holistic description of the oxidation mechanism in CuNi, which applies to other alloy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hole–hole Tamm–Dancoff-approximated density functional theory: A highly efficient electronic structure method incorporating dynamic and static correlation

The study of photochemical reaction dynamics requires accurate as well as computationally efficient electronic structure methods for the ground and excited states. While time-dependent density functional theory (TDDFT) is not able to capture static correlation, complete active space self-consistent field methods neglect much of the dynamic correlation. Hence, inexpensive methods that encompass both static and dynamic electron correlation effects are of high interest. Here, we revisit hole–hole Tamm–Dancoff approximated (hh-TDA) density functional theory for this purpose. The hh-TDA method is the hole–hole counterpart to the more established particle–particle TDA (pp-TDA) method, both of which are derived from the particle–particle random phase approximation (pp-RPA). In hh-TDA, the N-electron electronic states are obtained through double annihilations starting from a doubly anionic (N+2 electron) reference state. In this way, hh-TDA treats ground and excited states on equal footing, thus allowing for conical intersections to be correctly described. Furthermore, the treatment of dynamic correlation is introduced through the use of commonly employed density functional approximations to the exchange-correlation potential. Additionally, we show that hh-TDA is a promising candidate to efficiently treat the photochemistry of organic and biochemical systems that involve several low-lying excited states—particularly those with both low-lying ππ* and nπ* states where inclusion of dynamic correlation is essential to describe the relative energetics. In contrast to the existing literature on pp-TDA and pp-RPA, we employ a functional-dependent choice for the response kernel in pp- and hh-TDA, which closely resembles the response kernels occurring in linear response and collinear spin-flip TDDFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Unified Workflow for Sensitivity-Based Kinetic Analysis in Microkinetic Models

Degrees of rate control (DRC), apparent activation energies, and apparent reaction orders are established local sensitivity diagnostics for interpreting microkinetic models, but applying them routinely to large mechanisms often requires substantial reaction-specific bookkeeping, perturbation design, and postprocessing. Here, in this study, we present a unified derivative-based workflow that evaluates these quantities from a single compiled reaction-network model and target-rate definition. For any user-provided microkinetic model, the workflow compiles the mechanism into stoichiometrically consistent mass-action rate equations, solves the surface dynamics, and uses automatic differentiation to compute sensitivities with respect to rate constants, temperature, and gas partial pressures. By combining their calculations in the same framework, the workflow clearly demonstrates the relationships between different DRCs and the apparent activation energy. Using existing examples of propylene partial oxidation and methane oxidation on Pd(100), we verify expected transient redistribution of rate control, distinguish net Campbell DRCs from one-sided directional sensitivities, and show how apparent activation energy can be reconstructed either from one-sided DRCs or from state-based DRCs while critical mechanistic insights are obtained consistently. In the methane oxidation case, a pathway-subset test further illustrates how a simplified mechanism preserves key kinetic signatures of a full model, showing the potential of our user-friendly tool for model construction beyond kinetic analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Elucidating plasma dynamics in Hasegawa–Wakatani turbulence by information geometry

In this work, the impact of adiabatic electrons on drift-wave turbulence, modeled by the Hasegawa–Wakatani equations, is studied using information length. Information length is a novel theoretical method for measuring distances between statistical states represented by different probability distribution functions (PDFs) along the path of a system and represents the total number of statistically different states that a system evolves through in time. Specifically, the time-dependent PDFs of turbulent fluctuations for a given adiabatic index $A$ are computed. The changes in fluctuation statistics are then quantified in time by using information length. The numerical results provide time traces exhibiting intermittent plasma dynamics, and such behavior is identified by a rapid change in the information length. The effects of $A$ are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Global optimization of harmonic oscillator basis in covariant density functional theory

The present investigation focuses on the improvement of the accuracy of the description of binding energies within moderately sized fermionic basis. Using the solutions corresponding to infinite fermionic basis it was shown that in the case of meson exchange (ME) covariant energy density functionals (CEDFs) the global accuracy of the description of binding energies in the finite $N_F$ = 16 - 20 bases can be drastically (by a factor ranging from ~3 up to ~9 dependent on the functional and $N_F$) improved by a global optimization of oscillator frequency of the basis. This is a consequence of the unique feature of the ME functionals in which with increasing fermionic basis size fermionic and mesonic energies approach the exact (infinite basis) solution from above and below, respectively. As a consequence, an optimal oscillator frequency $\hbar\omega_0$ of the basis can be defined which provides an accurate reproduction of exact total binding energies by the ones calculated in truncated basis. This leads to a very high accuracy of the calculations in moderately sized $N_F=20$ basis when mass dependent oscillator frequency is used: global rms differences $\delta B_{rms}$ between the binding energies calculated in infinite and truncated bases are only 0.025 MeV and 0.031 MeV for the NL5(Z) and DD-MEZ functionals, respectively. Optimized values of the oscillator frequency $\hbar\omega_0$ are provided for three major classes of CEDFs, i.e. for density dependent meson exchange functionals, nonlinear meson exchange ones and point coupling functionals.

Binding energy & masses↗
DOE OSTI2025

Synthetic Band Structure Engineering of Graphene Using Block Copolymer-Templated Dielectric Superlattices

Engineering the electronic band structure of two-dimensional (2D) materials by imposing spatially periodic superlattice (SL) potentials opens a pathway to unconventional electronics. Nanopatterning the gate electrode or surface dielectric near 2D crystals provides a powerful strategy for realizing electrostatically tunable “remote” SLs with flexibility in lattice design. Here, we demonstrate the effectiveness of block copolymer (BCP)-templated dielectric nanopatterns for fabricating etch-free high-grade metal oxide SLs. Alumina (AlO x ) nanopatterns with hexagonal symmetry and a 38 nm SL wavelength are produced as a model material by directly converting a self-assembled BCP film via block-selective vapor phase infiltration. Despite micrometer-scale rotational disorder inherent to BCP self-assembly, electronic transport measurements of graphene reveal replica Dirac points at zero field and Hofstadter mini-gaps under finite magnetic fields. These results indicate the successful formation of remote SL potentials in graphene resulting from optimized AlO x nanopattern fabrication to achieve consistent lattice symmetry and periodicity at a macroscopic scale. The findings of this study, combined with the versatile, scalable, and cost-effective nature of BCP nanopatterning, highlight the potential of BCP-templated nanostructures for remote SL engineering in 2D crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Simulations for x-ray imaging of wave-packet dynamics

Previous work on imaging wave-packet dynamics with x-ray scattering revealed that the scattering patterns deviate substantially from the notion of instantaneous momentum density of the wave packet. Here we show that scattering patterns can provide clear insights into the electron wave-packet dynamics if the final state of the scattered electron and the scattered photon momentum are determined simultaneously. The scattering probability is shown to be proportional to the modulus square of the Fourier transform of the instantaneous electronic spatial wave function weighted by the final state of the electron. Several cases for the choice of final state of the electron are explored. First, the case where the final state can be measured up to a given principal quantum number n and orbital angular momentum l are presented. Next, the case where the final states can only be determined up to a given energy is discussed. Lastly, the case of an initial wave packet consisting of a large amount of a known stationary state and a small amount of an unknown stationary state is examined. The scattering profile is used to determine the properties of the unknown state in the wave packet.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Multipartite entanglement structure of fibered link states

We study the patterns of multipartite entanglement in Chern-Simons theory with compact simple gauge group 𝐺 and level 𝑘 for states defined by the path integral on “link complements,” i.e., compact manifolds whose boundaries consist of 𝑛 topologically linked tori. We focus on link complements which can be described topologically as fibrations over a Seifert surface. We show that the entanglement structure of such fibered link complement states is controlled by a topological invariant, the monodromy of the fibration. Thus, the entanglement structure of a Chern-Simons link state is not simply a function of the link, but also of the background manifold in which the link is embedded. In particular, we show that any link possesses an embedding into some background that leads to Greenberger–Horne–Zeilinger state (GHZ)-like entanglement. Furthermore, we demonstrate that all fibered links with periodic monodromy have GHZ-like entanglement, i.e., a partial trace on any link component produces a separable state. These results generalize to any three dimensional topological field theory with a dual chiral rational conformal field theory.

conformal field theory↗
DOE OSTI2025

Cryogenic Carbon Monoxide Oxidation on Cuprous Oxide

Performing oxidation reactions at low temperatures using earth-abundant materials is crucial for advancing solutions for sustainable chemistry. CO oxidation serves as a benchmark reaction to characterize oxidation and to advance fundamental concepts in surface chemistry. While there are several examples of CO oxidation occurring on metal oxides at low temperatures, from 300 K to ∼200 K, reactivity in the cryogenic temperature regime typically requires a metal nanoparticle on a metal oxide. Here, we show oxygen atoms on the (111) facet of Cu 2 O react with CO to form CO 2 at temperatures below 100 K. Combining spectroscopic experimental evidence with calculations, we propose a low barrier path for CO oxidation at reconstructed surface sites on Cu 2 O(111). This finding is a rare example of an earth-abundant metal oxide, in this case copper, that can provide highly reactive multifunctional sites, enabling both adsorption and reaction fundamental steps toward the efficient heterogeneous oxidation of chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Building materials genome from ground‐state configuration to engineering advance

Individual phases are commonly considered as the building blocks of materials. However, the accurate theoretical prediction of properties of individual phases remains elusive. The top-down approach by decoding genomic building blocks of individual phases from experimental observations is nonunique. The density functional theory (DFT), as a state-of-the-art solution of quantum mechanics, prescribes the existence of a ground-state configuration at 0 K for a given system. It is self-evident that the ground-state configuration alone is insufficient to describe a phase at finite temperatures as symmetry-breaking non-ground-state configurations are excited statistically at temperatures above 0 K. Our multiscale entropy approach (recently terms as Zentropy theory) postulates that the entropy of a phase is composed of the sum of the entropy of each configuration weighted by its probability plus the configurational entropy among all configurations. Consequently, the partition function of each configuration in statistical mechanics needs to be evaluated by its free energy rather than total energy. The combination of the ground-state and symmetry-breaking non-ground-state configurations represents the building blocks of materials and can be used to quantitatively predict free energy of individual phases with the free energy of each configuration predicted from DFT as well as all properties derived from free energy of individual phases.

CALPHAD↗
DOE OSTI2025

Two-Dimensional Siloxene Nanosheets: Understanding the Effect of Heat Treatment on the Surface Chemistry and Resulting Electrochemistry in Lithium-Based Batteries

Two-dimensional (2D) silicon materials are conceptually appealing as negative electrode materials in lithium-ion batteries due to their layered morphology, which can accommodate (de)lithiation-induced volume changes. Herein, heat treatment of 2D Siloxene materials was used to modify the surface functional groups to determine the impact on the electrochemical behavior. Spectroscopic characterization of the heat-treated nanosheets confirmed the loss of oxygenated and hydride surface functional groups with an increased annealing temperature. Formation and disproportionation of the amorphous suboxides with increasing heat treatment were affirmed with lab and synchrotron-based measurements. A reduced irreversible capacity was observed for Siloxene with a higher temperature heat treatment consistent with the formation of a more favorable surface electrolyte interphase (SEI). A Siloxene-400||NMC622 full cell (prepared with 400 °C-annealed Siloxene (Siloxene-400) and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622)) showed significantly enhanced capacity and rate capability compared to a nano Si||NMC622 cell. Finally, these results illustrate the ability of thermal annealing to modify the surface functional groups of Siloxene and highlight the favorable impact of the appropriate surface functionality on the electrochemistry of Siloxene in lithium cells.

25 ENERGY STORAGE↗