Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “State Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Eigenspace techniques for active flutter suppression

The use of eigenspace techniques for the design of an active flutter suppression system for a hypothetical research drone is discussed. One leading edge and two trailing edge aerodynamic control surfaces and four sensors (accelerometers) are available for each wing. Full state control laws are designed by selecting feedback gains which place closed loop eigenvalues and shape closed loop eigenvectors so as to stabilize wing flutter and reduce gust loads at the wing root while yielding accepatable robustness and satisfying constrains on rms control surface activity. These controllers are realized by state estimators designed using an eigenvalue placement/eigenvector shaping technique which results in recovery of the full state loop transfer characteristics. The resulting feedback compensators are shown to perform almost as well as the full state designs. They also exhibit acceptable performance in situations in which the failure of an actuator is simulated.

Garrard, William L.↗

Inertial Measurements for Aero-assisted Navigation (IMAN)

IMAN is a Python tool that provides inertial sensor-based estimates of spacecraft trajectories within an atmospheric influence. It provides Kalman filter-derived spacecraft state estimates based upon data collected onboard, and is shown to perform at a level comparable to the conventional methods of spacecraft navigation in terms of accuracy and at a higher level with regard to the availability of results immediately after completion of an atmospheric drag pass.

Jah, Moriba↗

Vector-Ordering Filter Procedure for Data Reduction

The vector-ordering filter (VOF) technique involves a procedure for sampling a large population of data vectors to select a subset of data vectors that fully characterize the state space of the large population. The VOF technique enables a large reduction of the volume of data that must be handled in the automated monitoring system and method discussed in the two immediately preceding articles. In so doing, the VOF technique enables the development of data-driven mathematical models of a monitored asset from sets of data that would otherwise exceed the memory capacities of conventional engineering computers. Data-driven mathematical models have been shown to offer high fidelity for purposes of control and monitoring of assets. In practice, a collection of asset-operating observations is acquired with the intention that the collection contain observations characteristic of the full dynamic range of operation of the asset. Often, such a collection contains an extremely large number of observations, many of which are redundant. The VOF technique fills the need for a means to extract, from the original collection of observational data, a reduced data matrix that excludes redundant data while maintaining the full statistical character and dynamic range of the original data. The reduced data matrix can then be used as the input data for development of a mathematical model of the monitored asset, or as training data for a neural-network substitute for an explicit mathematical model of the asset. Alternatively, the reduced data matrix can, itself, be used directly as a mathematical model of the monitored asset, as is commonly done in multivariate state-estimation techniques. The original data are collected from the asset over a range of operating states and are put in matrix form. Each column vector in the original data matrix represents the signal values acquired at a particular operational state of the asset. Thus, the number of columns of the original data matrix equals the number of observed states and the number of rows in this matrix equals the number of signals acquired at each observation. In the VOF technique, one extracts the reduced data matrix from the original data matrix through the selection of a representative subset of the column (state) vectors.

Bickford, Randall L.↗

Application of GPS to Enable Launch Vehicle Upper Stage Heliocentric Disposal

To properly dispose of the upper stage of the Space Launch System, the vehicle must perform a burn in Earth orbit to perform a close flyby of the Lunar surface to gain adequate energy to enter into heliocentric space. This architecture was selected to meet NASA requirements to limit orbital debris in the Earth-Moon system. The choice of a flyby for heliocentric disposal was driven by mission and vehicle constraints. This paper describes the SLS mission for Exploration Mission -1, a high level overview of the Block 1 vehicle, and the various disposal options considered. The research focuses on this analysis in terms of the mission design and navigation problem, focusing on the vehicle-level requirements that enable a successful mission. An inertial-only system is shown to be insufficient for heliocentric flyby due to large inertial integration errors from launch through disposal maneuver while on a trans-lunar trajectory. The various options for aiding the navigation system are presented and details are provided on the use of GPS to bound the state errors in orbit to improve the capability for stage disposal. The state estimation algorithm used is described as well as its capability in determination of the vehicle state at the start of the planned maneuver. This data, both dispersions on state and on errors, is then used to develop orbital targets to use for meeting the required Lunar flyby for entering onto a heliocentric trajectory. The effect of guidance and navigation errors on this capability is described as well as the identified constraints for achieving the disposal requirements. Additionally, discussion is provided on continued analysis and identification of system considerations that can drive the ability to integrate onto a vehicle intended for deep space.

Anzalone, Evan J.↗

Equation‐Free Surrogate Modeling of Geophysical Flows at the Intersection of Machine Learning and Data Assimilation

Abstract There is a growing interest in developing data‐driven reduced‐order models for atmospheric and oceanic flows that are trained on data obtained either from high‐resolution simulations or satellite observations. The data‐driven models are non‐intrusive in nature and offer significant computational savings compared to large‐scale numerical models. These low‐dimensional models can be utilized to reduce the computational burden of generating forecasts and estimating model uncertainty without losing the key information needed for data assimilation (DA) to produce accurate state estimates. This paper aims at exploring an equation‐free surrogate modeling approach at the intersection of machine learning and DA in Earth system modeling. With this objective, we introduce an end‐to‐end non‐intrusive reduced‐order modeling (NIROM) framework equipped with contributions in modal decomposition, time series prediction, optimal sensor placement, and sequential DA. Specifically, we use proper orthogonal decomposition (POD) to identify the dominant structures of the flow, and a long short‐term memory network to model the dynamics of the POD modes. The NIROM is integrated within the deterministic ensemble Kalman filter (DEnKF) to incorporate sparse and noisy observations at optimal sensor locations obtained through QR pivoting. The feasibility and the benefit of the proposed framework are demonstrated for the NOAA Optimum Interpolation Sea Surface Temperature (SST) V2 data set. Our results indicate that the NIROM is stable for long‐term forecasting and can model dynamics of SST with a reasonable level of accuracy. Furthermore, the prediction accuracy of the NIROM gets improved by almost one order of magnitude by the DEnKF algorithm.

Pawar, Suraj↗

A Review of Operational Water Consumption and Withdrawal Factors for Electricity Generating Technologies

This report provides estimates of operational water withdrawal and water consumption factors for electricity generating technologies in the United States. Estimates of water factors were collected from published primary literature and were not modified except for unit conversions. The presented water factors may be useful in modeling and policy analyses where reliable power plant level data are not available.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Parameter estimation by implicit sampling

© 2015 Mathematical Sciences Publishers. Implicit sampling is a weighted sampling method that is used in data assimilation to sequentially update state estimates of a stochastic model based on noisy and incomplete data. Here we apply implicit sampling to sample the posterior probability density of parameter estimation problems. The posterior probability combines prior information about the parameter with information from a numerical model, e.g., a partial differential equation (PDE), and noisy data. The result of our computations are parameters that lead to simulations that are compatible with the data. We demonstrate the usefulness of our implicit sampling algorithm with an example from subsurface flow. For an efficient implementation, we make use of multiple grids, BFGS optimization coupled to adjoint equations, and Karhunen-Loève expansions for dimensional reduction. Several difficulties of Markov chain Monte Carlo methods, e.g., estimation of burn-in times or correlations among the samples, are avoided because the implicit samples are independent.

Morzfeld, Matthias↗

Robustness and computational aspects of nonlinear stochastic estimators and regulators

Robustness properties of nonlinear extended Kalman filters with constant gains and modeling errors are presented. Sufficient conditions for the nondivergence of state estimates generated by such nonlinear estimators are given. In addition, the overall robustness and stability properties of closed-loop stochastic regulators, based upon the linear-quadratic Gaussian design methodology using linearized dynamics, are presented; the sufficient conditions for closed-loop stability have a 'separation-type' property.

Safonov, M. G.↗

Robustness and computational aspects of nonlinear stochastic estimators and regulators

Robustness properties of nonlinear extended Kalman filters with constant gains and modeling errors are presented. Sufficient conditions for the nondivergence of state estimates generated by such nonlinear estimators are given. In addition, the overall robustness and stability properties of closed-loop stochastic regulators, based upon the Linear-Quadratic-Gaussian design methodology using linearized dynamics, are presented; the sufficient conditions for closed-loop stability have 'separation-type' property.

Safonov, M. G.↗

GPS-Based Reduced Dynamic Orbit Determination Using Accelerometer Data

Currently two gravity field satellite missions, CHAMP and GRACE, are equipped with high sensitivity electrostatic accelerometers, measuring the non-conservative forces acting on the spacecraft in three orthogonal directions. During the gravity field recovery these measurements help to separate gravitational and non-gravitational contributions in the observed orbit perturbations. For precise orbit determination purposes all these missions have a dual-frequency GPS receiver on board. The reduced dynamic technique combines the dense and accurate GPS observations with physical models of the forces acting on the spacecraft, complemented by empirical accelerations, which are stochastic parameters adjusted in the orbit determination process. When the spacecraft carries an accelerometer, these measured accelerations can be used to replace the models of the non-conservative forces, such as air drag and solar radiation pressure. This approach is implemented in a batch least-squares estimator of the GPS High Precision Orbit Determination Software Tools (GHOST), developed at DLR/GSOC and DEOS. It is extensively tested with data of the CHAMP and GRACE satellites. As accelerometer observations typically can be affected by an unknown scale factor and bias in each measurement direction, they require calibration during processing. Therefore the estimated state vector is augmented with six parameters: a scale and bias factor for the three axes. In order to converge efficiently to a good solution, reasonable a priori values for the bias factor are necessary. These are calculated by combining the mean value of the accelerometer observations with the mean value of the non-conservative force models and empirical accelerations, estimated when using these models. When replacing the non-conservative force models with accelerometer observations and still estimating empirical accelerations, a good orbit precision is achieved. 100 days of GRACE B data processing results in a mean orbit fit of a few centimeters with respect to high-quality JPL reference orbits. This shows a slightly better consistency compared to the case when using force models. A purely dynamic orbit, without estimating empirical accelerations thus only adjusting six state parameters and the bias and scale factors, gives an orbit fit for the GRACE B test case below the decimeter level. The in orbit calibrated accelerometer observations can be used to validate the modelled accelerations and estimated empirical accelerations computed with the GHOST tools. In along track direction they show the best resemblance, with a mean correlation coefficient of 93% for the same period. In radial and normal direction the correlation is smaller. During days of high solar activity the benefit of using accelerometer observations is clearly visible. The observations during these days show fluctuations which the modelled and empirical accelerations can not follow.

VanHelleputte, Tom↗

An encoder–decoder LSTM-based EMPC framework applied to a building HVAC system

Numerous studies have demonstrated the benefit of economic model predictive control (EMPC) applied to building heating, ventilation, and air conditioning (HVAC) systems. However, the construction and training of predictive models for building HVAC systems are widely recognized as a key technological barrier preventing large-scale adoption of EMPC for buildings. In this work, an encoder–decoder long short-term memory-based EMPC framework is developed. The key advantage of the approach is that a model may be automatically generated from a list of inputs and outputs. From the definition of inputs and outputs, the constructed model may be trained and automatically embedded into the EMPC framework for real-time estimation and control. The overall end-to-end EMPC framework from model training to on-line estimation and control are described. To this end, the encoder–decoder model provides a natural framework for state estimation (encoder), which is required to provide an initial condition for the predictive model of EMPC (decoder). Closed-loop simulations using EnergyPlus are performed to demonstrate the approach. The simulated closed-loop system consists of a building zone from a multi-zone building, which is served by an air handling unit-variable air volume HVAC system. For the HVAC example considered, the trained encoder–decoder model can predict the indoor air temperature and HVAC sensible cooling rate of a building zone over a two-day horizon with high accuracy. Overall, we find that considering a time-of-use electric rate structure, the EMPC, which manipulates the zone temperature setpoint, can reduce the HVAC power consumption cost relative to keeping the zone temperature setpoint at its maximum value (i.e., minimum energy approach).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The analysis of airline flight records for winds and performance with application to the Delta 191 accident

Advanced analytical methods applied to airline digital flight records and ATC radar tracking data are providing new insights into atmospheric disturbances that cause serious operating problems for aircraft. Performance-based methods for estimating unmeasured flow angles and the possible influence of rain on lift and drag, and a state-estimation procedure for determining winds along the flightpath are reviewed. The methods are applied to data records from the Delta Flight 191 wind-shear accident at the Dallas/Ft. Worth Airport (August 2, 1985) which involved an L-1011 airliner on final approach. The results indicate that the aircraft encountered a strong downlow followed by a strong outflow accompanied by large and rapid changes in the vertical wind. This pattern of low-level winds is consistent with the model that treats a downburst as a vortex ring. Although rain was present in the downburst, the analysis showed no evidence of performance loss. The results obtained from analyses of airline turbulence encounters provide a means for simulating turbulence phenomena and for training pilots for future encounters.

Bach, R. E., Jr.↗

The calculation of high-temperature equilibrium and nonequilibrium specific heat data for N2, O2 and NO

Specific heat data for high-temperature air species are needed to compute the temperature and enthalpy of gas mixtures in aerothermodynamics flowfield calculations. Accurate data are known only for temperatures under 6000 K, but are required for temperatures exceeding 25,000 K. In the present study, CP data are computed for N2, O2 and NO. The calculations are based on summations over all the vibration-rotation energy levels for all known bound electronic states. Estimates are made for the error introduced by the neglect of possible additional high-lying electronic states. In addition, a scheme for the partitioning of the internal energy into vibrational, rotational and electronic contributions is presented which consistently accounts for the nonseparable nature of the various energy modes. The multitemperature specific heat data are recommended for use in nonequilibrium flowfield models.

Jaffe, Richard L.↗

Development of the GEOS-MIT gcm Atmosphere-Ocean Model for Coupled Data Assimilation

During the last two plus decades, The Goddard Earth Observing System (GEOS) and Massachusetts Institute of Technology (MIT) modeling groups have developed, respectively, atmosphere-only and ocean-only global general circulation models. These two models (GEOS and MIT-GCM (General Circulation Model)) have demonstrated their data assimilation capabilities with the recent releases of the Modern Era Reanalysis for Research Applications, Version 2 (MERRA-2) atmospheric reanalysis and the Estimating the Circulation and Climate of the Ocean, Version 4 (ECCO-v4) ocean (and sea ice) state estimate. Independently, the two modeling groups have also produced global atmosphere-only and ocean-only simulations with km-scale grid spacing which proved invaluable for process studies and for the development of satellite and in-situ sampling strategies. Recently, a new effort has been made to couple these two models and to leverage their data-assimilation and high resolution capabilities (i.e., eddy-permitting ocean, cloud-permitting atmosphere). The focus in the model development is put on sub-seasonal to decadal time scales. In this talk, I discuss the new coupled model and present some first coupled simulation results. This will include a high-resolution coupled GEOS-MIT simulation, whereby we have coupled a cubed-sphere-720 (approximately 1/8 degrees) configuration of the GEOS atmosphere to a latitude-longitude-cap-1080 (approximately 1/12 degrees) configuration of the MIT ocean. We compare near-surface diagnostics of this fully coupled ocean-atmosphere set-up to equivalent atmosphere-only and ocean-only simulations. In the comparisons we focus in particular on the differences in air-sea interactions between sea surface temperature (SST) and wind for the coupled and uncoupled simulations.

Strobach, Ehud↗

The Development of the New GEOS-MITgcm Atmosphere-Ocean Model for Coupled Data Assimilation System

During the last two plus decades, The Goddard Earth Observing System (GEOS) and Massachusetts Institute of Technology (MIT) modeling groups have developed, respectively, atmosphere-only and ocean-only global general circulation models. These two models (GEOS and MITgcm) have demonstrated their data assimilation capabilities with the recent releases of the Modern Era Reanalysis for Research Applications, Version 2 (MERRA-2) atmospheric reanalysis and the Estimating the Circulation and Climate of the Ocean, Version 4 (ECCO-v4) ocean (and sea ice) state estimate. Independently, the two modeling groups have also produced global atmosphere-only and ocean-only simulations with km-scale grid spacing which proved invaluable for process studies and for the development of satellite and in-situ sampling strategies.Recently, a new effort has been made to couple these two models and to leverage their data-assimilation and high resolution capabilities (i.e., eddy-permitting ocean, cloud-permitting atmosphere). The focus in the model development is put on sub-seasonal to decadal time scales. In this talk, I discuss the new coupled model and present some first coupled simulation results. This will include a high-resolution coupled GEOS-MIT simulation, whereby we have coupled a cubed-sphere-720 (~ 1/8 deg) configuration of the GEOS atmosphere to a lat-lon-cap-1080 (~ 1/12 deg) configuration of the MIT ocean. We compare near-surface diagnostics of this fully coupled ocean-atmosphere set-up to equivalent atmosphere-only and ocean-only simulations. In the comparisons we focus in particular on the differences in air-sea interactions between sea surface temperature (SST) and wind for the coupled and uncoupled simulations.

Strobach, Ehud↗

A New Atmosphere-Ocean Model for Studying Air-Sea Interactions and Coupled Data Assimilation

During the last two plus decades, The Goddard Earth Observing System (GEOS) and Massachusetts Institute of Technology (MIT) modeling groups have developed, respectively, atmosphere-only and ocean-only global general circulation models. These two models (GEOS and MITgcm) have demonstrated their data assimilation capabilities with the recent releases of the Modern Era Reanalysis for Research Applications, Version 2 (MERRA-2) atmospheric reanalysis and the Estimating the Circulation and Climate of the Ocean, Version 4 (ECCO-v4) ocean (and sea ice) state estimate. Independently, the two modeling groups have also produced global atmosphere-only and ocean-only simulations with km-scale grid spacing which proved invaluable for process studies and for the development of satellite and in-situ sampling strategies.Recently, a new effort has been made to couple these two models and to leverage their data-assimilation and high resolution capabilities (i.e., eddy-permitting ocean, cloud-permitting atmosphere). The focus in the model development is put on sub-seasonal to decadal time scales. In this talk, I discuss the new coupled model and present some first coupled simulation results. This will include a high-resolution coupled GEOS-MIT simulation, whereby we have coupled a cubed-sphere-720 (~ 1/8°) configuration of the GEOS atmosphere to a lat-lon-cap-1080 (~ 1/12°) configuration of the MIT ocean. We compare near-surface diagnostics of this fully coupled ocean-atmosphere set-up to equivalent atmosphere-only and ocean-only simulations. In the comparisons we focus in particular on the differences in air-sea interactions between sea surface temperature (SST) and wind for the coupled and uncoupled simulations.

Strobach, Ehud↗

The Development of the New GEOS-MITgcm Atmosphere-Ocean Model for Coupled Data Assimilation System

During the last two plus decades, The Goddard Earth Observing System (GEOS) and Massachusetts Institute of Technology (MIT) modeling groups have developed, respectively, atmosphere-only and ocean-only global general circulation models. These two models (GEOS and MITgcm) have demonstrated their data assimilation capabilities with the recent releases of the Modern Era Reanalysis for Research Applications, Version 2 (MERRA-2) atmospheric reanalysis and the Estimating the Circulation and Climate of the Ocean, Version 4 (ECCO-v4) ocean (and sea ice) state estimate. Independently, the two modeling groups have also produced global atmosphere-only and ocean-only simulations with km-scale grid spacing which proved invaluable for process studies and for the development of satellite and in-situ sampling strategies.Recently, a new effort has been made to couple these two models and to leverage their data-assimilation and high resolution capabilities (i.e., eddy-permitting ocean, cloud-permitting atmosphere). The focus in the model development is put on sub-seasonal to decadal time scales. In this talk, I discuss the new coupled model and present some first coupled simulation results. This will include a high-resolution coupled GEOS-MIT simulation, whereby we have coupled a cubed-sphere-720 (~ 1/8°) configuration of the GEOS atmosphere to a lat-lon-cap-1080 (~ 1/12°) configuration of the MIT ocean. We compare near-surface diagnostics of this fully coupled ocean-atmosphere set-up to equivalent atmosphere-only and ocean-only simulations. In the comparisons we focus in particular on the differences in air-sea interactions between sea surface temperature (SST) and wind for the coupled and uncoupled simulations.

Strobach, Ehud↗

Terrain Relative Navigation for Guided Descent on Titan

Titan’s dense atmosphere, low gravity, and high winds at high altitudes create descent times of >90 minutes with standard entry/descent/landing (EDL) architectures and result in large unguided landing ellipses, with 99% values of 110x110 km and 149x72 km in recent Titan lander proposals. Enabling precision landing on Titan could increase science return for the types of missions proposed to date and make additional types of landing sites accessible, opening up new possibilities for science investigations. Precision landing on Titan has unique challenges, because the hazy atmosphere makes it difficult to see the surface and because it requires guided descent with divert ranges that are one to two orders of magnitude larger than needed for other target bodies, i.e. up to on the order of 100 km. It is conceivable that such a divert capability could be provided economically by a parafoil or other steerable aerodynamic decelerator deployed several 10s of km above the surface. The long descent times lead to large inertial navigation errors, hence a need for terrain relative navigation (TRN). This would require a TRN capability that can operate at such altitudes, despite challenges of seeing the surface sufficiently clearly and of depending on map products that are two orders of magnitude lower in spatial resolution than those for Mars and airless bodies. We then develop algorithms for map matching and feature tracking with descent images and test these with synthetic images created from Cassini/Huygens data sets and our radiative transfer model. We also introduce new possibilities for TRN based on the potential to discriminate some specific types of terrain onboard in descent imagery, such as lake vs adjacent ground and dune vs interdune. We use sensor measurement noise models in simulations of state estimation with an extended Kalman filter that includes coordinates of a set of tracked features in the state vector. Case studies were done for two notional landing sites, one in a site with only dry ground and one in a Titan lake district. In both cases, the filter error model shows 3 position error at touchdown on the order of 2 km. More work is needed to validate these results with higher fidelity camera models and larger data sets, but this is very promising.

Matthies, Larry↗