Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shear deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Rheological properties of nondilute suspensions of deformable particles

The creeping flow equations have been solved to account for effects of shear on drop shape when the influence of neighboring drops is considered. A cell model is used to account for finite concentrations of the dispersed phase. From these results a constitutive equation is derived and implications for several flows are discussed. The shape and orientation of drops are computed and compared with existing data. Finally, dynamic viscosity and rigidity are obtained for nondilute suspensions of viscoelastic particles in an oscillatory shear flow.-

Choi, S. J.↗
DOE OSTI2025

Benchmark study of a new simplified DFN model for shearing of intersecting fractures and faults

It is challenging to quantitatively predict shearing of intersecting fractures/faults because of dynamic frictional contacts accompanied by possible nonlinear rock deformation. To address such challenges, a new conceptual model—the simplified DFN model—was proposed and validated by Hu et al. 46 to use major paths (MPs) to represent complicated DFNs for calculation of shearing. In this work, we conducted a benchmark study for three examples that involve different levels of complexity of intersecting fractures, and correspondingly different numbers of MPs. The codes and software that were used in the benchmark cover a range of continuum, discontinuum and hybrid numerical methods: NMM (LBNL), FLAC3D (LBNL), GBDEM (KIGAM), FRACOD (DynaFrax), and CASRock (CAS). The general consistency between DFN and MP cases as predicted by all the codes/software demonstrates that major paths can be used to simplify the geometry of DFNs in a wide range of software. Disagreement in results made by some software and potential future improvements are discussed. We show that (1) shearing of one or multiple major fractures can be reduced if there are multiple smaller intersecting fractures in that area, which is a useful basis for understanding and controlling induced seismicity and merits further analysis, and (2) the agreement achieved in the benchmark examples provide confidence that the simplified DFN model is a promising conceptual model that can be used for different types of numerical approaches and software for simplifying the analysis of the shearing of intersecting fractures and faults.

58 GEOSCIENCES↗
NASA NTRS1997

Mechanical signals in plant development: a new method for single cell studies

Cell division, which is critical to plant development and morphology, requires the orchestration of hundreds of intracellular processes. In the end, however, cells must make critical decisions, based on a discrete set of mechanical signals such as stress, strain, and shear, to divide in such a way that they will survive the mechanical loads generated by turgor pressure and cell enlargement within the growing tissues. Here we report on a method whereby tobacco protoplasts swirled into a 1.5% agarose entrapment medium will survive and divide. The application of a controlled mechanical load to agarose blocks containing protoplasts orients the primary division plane of the embedded cells. Photoelastic analysis of the agarose entrapment medium can identify the lines of principal stress within the agarose, confirming the hypothesis that cells divide either parallel or perpendicular to the principal stress tensors. The coincidence between the orientation of the new division wall and the orientation of the principal stress tensors suggests that the perception of mechanical stress is a characteristic of individual plant cells. The ability of a cell to determine a shear-free orientation for a new partition wall may be related to the applied load through the deformation of the matrix material. In an isotropic matrix a uniaxial load will produce a rotationally symmetric strain field, which will define a shear-free plane. Where high stress intensities combine with the loading geometry to produce multiaxial loads there will be no axis of rotational symmetry and hence no shear free plane. This suggests that two mechanisms may be orienting the division plane, one a mechanism that works in rotationally symmetrical fields, yielding divisions perpendicular to the compressive tensor, parallel to the long axis of the cell, and one in asymmetric fields, yielding divisions parallel to the short axis of the cell and the compressive tensor.

NASA Discipline Number 40-50↗
NASA NTRS1988

Petrology and geochemistry of the high-pressure Nilgiri Granulite Terrane, Southern India

The Nilgiri granulite terrane in Southern India is predominantly composed of late Archaean medium- to coarse-grained enderbitic to charnockitic rocks. The dominant regional foliation strikes N60 to 70E with generally steep dips. Tight minor isoclinal folds have been observed in places. Granoblastic polygonal micro-structures are common and indicate thorough post-kinematic textural and chemical equilibration at conditions of the granulite facies (2.5 Ga ago). Late compressional deformation in connection with the formation of the Moyar and Bhavani shear zones to the north and south of the Nilgiri block, resulted in wide-spread development of weakly to strongly strained fabrics and was accompanied by minor rehydration. Enderbites and charnockites range from tonalitic to granodioritic in composition. A magmatogenic origin of the protoliths is inferred from their chemical characteristics which resemble those of the andesitic to dacitic members of Cordillera-type calc-alkaline igneous suites. A significant lithological feature of the Nilgiri granulite terrane are numerous extended bodies, lenses and pods of gabbroic and pyroxenitic rocks which are aligned conformable to the foliation of the enderbite-charnockite complex and which have also been deformed and metamorphosed at granulite facies conditions.

Srikantappa, C.↗
DOE OSTI2020

< c+a > dislocations in {101 - 2} twins in Mg: A kinematic and energetic requirement

Consideration of published TEM and molecular dynamics studies of interactions between matrix dislocations and {101¯2} twin boundaries (TB) in hexagonal close packed metals inspires a hypothesis regarding the formation of dislocations with < c+a > Burgers vectors inside the twins. It was previously reported that when basal < a > dislocations from the matrix are swept by an advancing TB, they are converted into partial dislocations bounding basal I 1 stacking faults (SFs) within the twin. In the present work, we show that this dislocation configuration near TB renders it energetically favorable for a pair of partial dislocations to constrict into a dislocation within the twin. New in situ TEM observations confirm this hypothesis by revealing long < c+a > dislocation dipoles terminated by the TB at one end and by I1 SFs within the twin at the other end. Finally, the resulting near-screw < c+a > dislocation dipoles are observed to be glissile, enabling self-annihilation in some circumstances. Thus, rather than requiring a high energy dislocation pile-up to press two < a > dislocations through a TB into a single < c+a > dislocation, it is demonstrated that < c+a > dislocations naturally form, within {101¯2} twins in Mg, as TB migrates into a matrix, which inevitably contains dislocations with < a > Burgers vectors. Furthermore, these observations help to explain how the twins themselves may subsequently deform and why they may be particularly vulnerable to plastic, shear localization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Shock response of cobalt-based cemented tungsten carbides at pressures up to 100 GPa

In the present study, shock wave experiments are conducted on General Carbide cemented tungsten carbides with 3.7 wt.% and 6.0 wt.% cobalt binder to determine their shock compression response up to 100 GPa. A three-stage particle velocity profile is observed in the experiments -- an initial elastic-rise to the Hugoniot elastic limit (HEL), an elastic-plastic ramp indicating post-yield hardening, and finally a rise to the peak shocked Hugoniot state. The results of the experiments are used to determine the HEL, shock velocity (U s ) vs. particle velocity (u p ) Hugoniot relationship, and the longitudinal stress vs. specific volume Hugoniot relationship for the two samples. Here, the HEL for the WC 3.7wt% Co and WC 6.0wt% Co samples was determined to be ~4.45 GPa and 3.72 GPa, respectively. The U s – u p relation was determined to be U s = 4.97(0.006)+1. 446 (0.018) u p for WC 3.7 wt.% Co and U s = 4.93(0.006)+1. 454(0.017)u p for the WC 6.0 wt.% Co sample at peak particle velocities>0.75 km/s. For both WC grades, in the particle velocity regime less than ~0.75 km/s, the measured shock wave velocities were found to be larger than those predicted by the linear U s –u p Hugoniot relationship, indicating the two WC samples to preserve substantial strength in the post-yield deformation regime. Both WC grades show a catastrophic drop in shear stress carrying capacity when shocked to longitudinal stresses greater than ~70 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Violation of the Cauchy–Born rule in multi-principal element alloys

Multi-principal element alloys are a novel class of materials that are formed by combining multiple elements in high concentrations and show exceptional properties compared to conventional alloys. These alloys have high configurational entropy due to inherent atomic disorder. The Cauchy–Born rule is a popular homogenization method for linking atomistic to continuum length scales. In this Letter, we use ab initio density functional theory calculations to report that the Cauchy–Born rule, which holds in conventional alloys in the absence of defects, is not valid in multi-principal element alloys. Further, the violation of the Cauchy–Born rule in these alloys is attributed to the presence of atomic disorder due to which the deformations are inhomogeneous. Our results also show the deviations in deformation are related to the magnitude of the stretch and shear by power laws.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The effect of shear strain and shear localization on fault healing

The seismic cycle of repeated earthquake failure requires that faults regain frictional strength during the interseismic phase, when the fault is locked or undergoing quasi-static creep. Fault healing plays a central role in determining earthquake stress drop, recurrence interval, elastic radiation frequency and other source parameters. In particular, the longer a fault remains quasi-stationary, the stronger it becomes and the larger the potential stress drop can be for the next event. Here, we address the role of shear strain and strain localization on fault healing and healing rate. We performed slide-hold-slide friction experiments on quartz gouge in the double-direct shear configuration for shear strain up to 25 and hold times from 10 to 1000 s. The results show that both healing and healing rate increase nonlinearly with increasing shear strain. Frictional healing scales with volumetric strain within the laboratory fault zone. Using the volumetric strain upon reshear as a proxy for strain localization, we demonstrate that the capacity of a fault to heal is directly proportional to shear bandwidth and degree of strain localization. The more the deformation is localized, the higher are the healing and healing rate, and thus, the fault strength. Our data provide a framework for understanding variations in fault strength over the seismic cycle and the role of brecciation and strain localization on spatiotemporal variations in fault strength.

58 GEOSCIENCES↗
NASA NTRS1982

PMR-15 polyimide modifications for improved prepreg tack

The use of mixed solvents and of modified monomeric ester reactants was investigated as a means of improving the tack and drape retention characteristics of PMR-15 polyimide prepreg. Methanol, ethanol, 1-propanol and 1-butanol were used to prepare the esters, prepreg solutions, and T-300 graphite fabric and Celion 6000 unidirectional fiber prepregs. The tack retention characteristics of the T-300 fabric prepreg after exposure to simulated use conditions were determined using a simple lap shear test. Drape was qualitatively assessed by visually monitoring the deformability of the prepreg. Thermo-oxidative stability and mechanical properties retention of the Celion 6000 grahite fiber composites were determined as a function of exposure time in air at 600 F.

Vannucci, R. D.↗
NASA NTRS1983

Rhombohedral twinning in alumina

Alumina single crystals were deformed in compression along the c axes at temperatures of 625 to 1373 K. Large scale deformation by rhombohedral twinning was observed at a constant resolved shear stress of only 12.6 MPa between about 900 and 1373 K. Below 900 K, the twinning stress for specimens with ground surfaces rose rapidly to 227 MPa at 625 K. A model for twin growth in the absence of dislocation slip is proposed.

Scott, W. D.↗
NASA NTRS1991

Creep and fracture of dispersion-strengthened materials

The creep and fracture of dispersion strengthened materials is reviewed. A compilation of creep data on several alloys showed that the reported values of the stress exponent for creep varied between 3.5 and 100. The activation energy for creep exceeded that for lattice self diffusion in the matrix in the case of some materials and a threshold stress behavior was generally reported in these instances. The threshold stress is shown to be dependent on the interparticle spacing and it is significantly affected by the initial microstructure. The effect of particle size and the nature of the dispersoid on the threshold stress is not well understood at the present time. In general, most studies indicate that the microstructure after creep is similar to that before testing and very few dislocations are usually observed. It is shown that the stress acting on a dispersoid due to a rapidly moving dislocation can exceed the particle yield strength of the G sub p/1000, where G sub p is the shear modulus of the dispersoid. The case when the particle deforms is examined and it is suggested that the dislocation creep threshold stress of the alloy is equal to the yield strength of the dispersoid under these conditions. These results indicate that the possibility that the dispersoid creep threshold stress is determined by either the particle yield strength or the stress required to detach a dislocation from the dispersoid matrix interface. The conditions under which the threshold stress is influenced by one or the other mechanism are discussed and it is shown that the particle yield strength is important until the extent of dislocation core relaxation at the dispersoid matrix interface exceeds about 25 pct. depending on the nature of the particle matrix combination. Finally, the effect of grain boundaries and grain morphology on the creep and fracture behavior of dispersoid strengthened alloys is examined.

Raj, Sai V.↗
NASA NTRS1989

Numerical study of a delta planform with multiple jets in ground effect

The flow past a 60-deg delta wing equipped with two thrust-reverser jets near the inboard trailing edge has been analyzed by numerical solution of the 3D thin-layer Navier-Stokes equations. An implicit, partially flux-split, approximately-factored Navier-Stokes solver coupled with a multiple grid embedding scheme has been adapted to this problem. Studies of the impact of numerical parameters (e.g., grid refinement and dissipation levels), and flow-field parameters such as the height of the delta wing above the ground plane and the jet size on the solution, were performed. Results of these numerical studies indicate some challenges in the accurate resolution of complex 3D free shear layers and jets. Nevertheless, flow features such as jet deformation and ground vortex formation observed in experimental flow visualizations are captured. Further, comparisons with experimental data confirm the ability to simulate the loss of wing-borne lift, commonly referred to 'suckdown, as the delta planform flies at slow speeds in close proximity to the ground. Detailed analysis of the numerical results has also given additional insight into the structure of the ground vortex and the mechanisms of lift loss.

Chawla, K.↗
DOE OSTI2020

The role of collective elasticity on activated structural relaxation, yielding, and steady state flow in hard sphere fluids and colloidal suspensions under strong deformation

In this work, we theoretically study the effect of external deformation on activated structural relaxation and aspects of the nonlinear mechanical response of glassy hard sphere fluids in the context of elastically collective nonlinear Langevin equation theory. This microscopic force-based approach describes activated relaxation as a coupled local–nonlocal event involving caging and longer range collective elasticity, with the latter becoming more important and ultimately dominant with increasing packing fraction under equilibrium conditions. The central new question we address is how this physical picture of activated relaxation, and the relative importance of local caging vs collective elasticity physics, depends on external deformation. Theoretical predictions are presented for deformation-induced enhancement of mobility, the onset of relaxation speed up at remarkably low values of stress, strain, or shear rate, apparent power law thinning of the steady state structural relaxation time and viscosity, a non-vanishing activation barrier in the shear thinning regime, an apparent Herschel–Bulkley form of the rate dependence of the steady state shear stress, exponential growth of different measures of a dynamic yield or flow stress with the packing fraction, and reduced fragility and dynamic heterogeneity under deformation. The results are contrasted with experiments and simulations, and qualitative or better agreement is found. An overarching conclusion is that deformation strongly reduces the importance of longer range collective elastic effects relative to the local caging aspect for most, but not all, physical questions, with deformation-dependent fragility and dynamic heterogeneity phenomena being qualitatively sensitive to collective elasticity. Overall, nonlinear rheology is predicted to be a more local problem than quiescent structural relaxation, albeit with deformation-modified activated processes still important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In situ study on the compression deformation of MoNbTaVW high-entropy alloy

The excellent mechanical properties of high-entropy alloys (HEAs) make them promising materials for advances in science and technology. However, the underlying mechanism of plastic deformation is not well understood. In situ experiments are urgently required to provide a fundamental understanding of the plastic deformation under high pressure. We performed in situ synchrotron X-ray diffraction (XRD) experiments to study compression deformation behavior of the HEA MoNbTaVW in a radial diamond anvil cell (rDAC). Our results show that the strength and ratio of the stress-to-shear modulus values are ~1.5 and 3 times that of pure tungsten (W), respectively. MoNbTaVW showed plastic deformation above 5 GPa and displayed a much stronger texture. In this work, we found that the active dislocation behavior is mainly responsible for the high strength in MoNbTaVW under compression. This unique technique opens a new avenue to investigate the in situ mechanical properties and their mechanism in other types of HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microscopic activated dynamics theory of the shear rheology and stress overshoot in ultradense glass-forming fluids and colloidal suspensions

We formulate a particle and force level, activated dynamics-based statistical mechanical theory for the continuous startup nonlinear shear rheology of ultradense glass-forming hard sphere fluids and colloidal suspensions in the context of the elastically collective nonlinear Langevin equation approach and a generalized Maxwell model constitutive equation. Activated structural relaxation is described as a coupled local-nonlocal event involving caging and longer range collective elasticity which controls the characteristic stress relaxation time. Theoretical predictions for the deformation-induced enhancement of mobility, the onset of relaxation acceleration at remarkably low values of stress, strain, or shear rate, apparent power law thinning of the steady-state structural relaxation time and viscosity, a nonvanishing activation barrier in the shear thinning regime, an apparent Herschel–Buckley form of the shear rate dependence of the steady-state shear stress, exponential growth of different measures of a yield or flow stress with packing fraction, and reduced fragility and dynamic heterogeneity under deformation were previously shown to be in good agreement with experiments. The central new question we address here is the defining feature of the transient response—the stress overshoot. In contrast to the steady-state flow regime, understanding the transient response requires an explicit treatment of the coupled nonequilibrium evolution of structure, elastic modulus, and stress relaxation time. We formulate a new quantitative model for this aspect in a physically motivated and computationally tractable manner. Theoretical predictions for the stress overshoot are shown to be in good agreement with experimental observations in the metastable ultradense regime of hard sphere colloidal suspensions as a function of shear rate and packing fraction, and accounting for deformation-assisted activated motion appears to be crucial for both the transient and steady-state responses.

Mechanics↗
DOE OSTI2022

Orientation-selected micro-pillar compression of additively manufactured 316L stainless steels: Comparison of as-manufactured, annealed, and proton-irradiated variants

In this work, irradiation response and deformation mechanisms of additively manufactured (AM) 316L stainless steel were studied by atomic scale characterization and micro-pillar compression. The AM 316L stainless steels were fabricated by direct energy deposition, a laser-based additive manufacturing process. Irradiation with 2 MeV protons at 360°C was performed to create ~1.8 displacements-per-atom (dpa) damage in AM 316L. Deformation behaviors of the as-manufactured, annealed, and proton-irradiated variants were studied, focusing on the effects of manufacturing-induced pores, residual stress, and irradiation-introduced defects (dislocation loops and voids). Micro-pillars were prepared from grains of pre-selected orientation, avoiding contributions of grain boundaries and allowing determination of resolved shear stress on {111} glide planes. Transmission electron microscopy was used to characterize the pre- and post-deformation microstructure. It was found that in the as-manufactured alloy variant, moving dislocations were the major deformation carrier, with noticeable blocking by fabrication-induced pores, In the annealed variant, hardness was reduced, and deformation was also accomplished by dislocation gliding. In the proton-irradiated variant, significant twinning was observed. Comparing measured resolved shear stress and predicted critical stress for dislocation dissociation, we conclude that irradiation hardening became high enough to activate twinning. Therefore, the deformation mechanism changes from dislocation gliding to twinning. The study is important for both processing optimization and performance evaluation of AM alloys for reactor applications.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Iosipescu shear characterization of polymeric and metal matrix composites

The paper outlines the results of an experimental/analytical investigation of deformation and stress fields in the test section of graphite/epoxy and boron/aluminum Iosipescu specimens using high-resolution moire interferometry and finite-element analysis. Very good correlation between experiment and analysis is demonstrated for the graphite/epoxy specimens. This, in turn, justifies the use of correction factors employed in the previous investigations to eliminate differences in the initial shear moduli obtained from 0-deg and 90-deg Iosipescu specimens. The significant discrepancies observed in the case of boron/aluminum specimens are attributed to localized yielding at the notch tips caused by the clamping action, the associated in-plane bending effects and changing boundary conditions due to slippage in the grips.

Pindera, M.-J.↗