Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sediment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Field-Scale Lysimeter Studies of Glass and Cementitious Waste Forms at the Hanford Site - 20392

The Hanford site Integrated Disposal Facility (IDF) will receive waste forms from vitrification activities at the Hanford Waste Treatment and Immobilization Plant (WTP). The waste form inventory to be disposed of at the IDF will consist of vitrified low-activity waste (LAW) in glass forms and solidified (or encapsulated) secondary wastes in cementitious forms. The IDF is a near-surface burial facility located near Hanford's Waste Treatment and Immobilization Plant in the 200 East Area of the site's Central Plateau. An extensive set of laboratory experimental data has been collected to support IDF performance assessment calculations of the eventual degradation of waste forms and mobility of contaminants. This paper describes the start of a field experiment to generate waste-form performance data on a larger scale (tens of centimeters), over a longer duration (five years or more), and under field conditions representative of the IDF. Results from this study are expected to improve model descriptions of contaminant mobility, reduce uncertainties about the representativeness of laboratory results in the IDF performance assessment, improve stakeholder confidence in the safe disposal of treated waste at the IDF, and facilitate the adoption of informed facility designs with the potential to reduce operational costs. A lysimeter test facility near Hanford's 200 West Area has been repurposed to carry out long-term assessments of waste forms buried in sediments excavated from the IDF. The waste forms are buried in large drainage lysimeters, open caissons that are two meters in diameter and three meters deep. Waste forms are buried in up to six locations in each lysimeter. Samplers collect pore water and drainage water beneath the waste forms and air from the pore space adjacent to waste forms. Sensors measure temperature, soil water content, soil water tension, and drainage flux. One lysimeter containing cementitious waste forms and one containing glass waste forms have been completed, along with a control lysimeter (without waste forms). The cementitious waste forms are Cast Stone grout formulations using a liquid secondary waste simulant and a generic Hanford high-salt simulant, as well as a hydrated lime-based grout formulation using a liquid secondary waste simulant. Technetium-99 and iodine-127 were added as tracers to monitor contaminant mobility. Glass waste forms were fabricated in two formulations (LAWA44 and ORLEC28), with rhenium and molybdenum tracers to monitor waste form degradation. The predicted performance of the waste forms in the lysimeters was modeled prior to installation to determine waste form size, tracer concentration/activity, and locations of sensors and samplers. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Amphiphilic Block Copolymers for Flocculation and Hydrophobization of Legacy Waste Suspensions in Flotation Driven Dewatering Operations

There exists a degrading legacy fuel pond at the Sellafield site (UK), known as the First-Generation Magnox Storage Pond (FGMSP). After being placed into a passive care and maintenance regime resulting in a long storage period, the fuel rods, primarily their cladding, corroded in the pond forming magnesium hydroxide based sludges and suspended material. These ponds are a grave concern to the British government in terms of hazard and risk reduction. Therefore, decommissioning of these ponds is a top priority beginning with the contaminant retrievals process [1]. The pond has accumulated significant quantities of waste materials amongst the skips of fuel, including but not limited to: large inventories of corroded Magnox sludge, fuel rod fragments, metal fragments (from fuel skips), concrete degradation products (from the pond infrastructure), wind-blown sand, and other materials such as bird guano and animal remains. This challenge requires a chemically robust technology to complete sludge retrievals [2]. As nuclear is different, a more stringent process operation criteria is required. From the criteria, flotation was selected as a viable technology. Flotation involves the application of collector molecules which modify the hydrophobicity of suspended particles allowing them to adsorb to rising bubbles. As some particles lack inertia for flotation due to their size, dual flocculant/collector agents can be deployed for greater particle recovery, in this case, amphiphilic diblock copolymers. Two copolymers of Poly(acrylic acid)-b-poly(n-butyl acrylate) (or PAA-b-PnBA), of different hydrophobic chain lengths (PBA) were synthesized for flotation campaigns. Flotation has shown promise to be a valuable rapid dewatering strategy for decommissioning of legacy waste ponds whilst upholding the required operational criteria. This research has shown: PAA-b-PnBA copolymers promote flocculation of Mg(OH){sub 2} particulates. Diblock copolymers retain more fluid than traditional surfactant based collectors wrt. relative particulate recovery performance- where longer PnBA chain length polymers performed best. Performance appears to be hydrodynamically limited due to over-flocculation of Mg(OH){sub 2}. Potential to combine with sedimentation for high particle recovery with low fluid carryover.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Long Term Assessment of Radiocesium in Deer, Fish, Soil, and Vegetation at the Savannah River Site

Throughout the Savannah River Site's (SRS) operational history, many radionuclides have been released into the environment. However, due to fallout from weapons testing, the amount released from SRS, its persistence in the environment, and the seclusion of the Site, radiocesium (Cs-137) is one of the most critical radionuclides in the SRS environment. The Effective half-life (Te) is the time it takes for a radionuclide in the environment to decrease by 50% of its initial amount. There are three means of radionuclide removal: Physical: Radioactive decay, sedimentation, and washout; Chemical: Changes in pH, oxidation state or adsorption; Biological: Changes in the food web or translocation. Effective half-life (T{sub e}) = log{sub e}2/λ{sub e} Where λ{sub e} is estimated from the slopes of loge-transformed Cs-137 activity concentrations regressed on year. The objective of this work was to calculate the effective half-life of Cs-137 in various biota at SRS and to perform an assessment of the changes in the effective half life over time. Compared to 2013 data, there is a slight increase in the effective half-lives for fish at most sampling locations. This effective half-life increase is an indication that the rate of Cs-137 loss is starting to plateau. The effective half-life of Cs-137 in SRS fish ranges from 4-11 years. The effective half-life of Cs-137 in soil at the Creek plantation is about 15 years. The effective half-life of Cs-137 in grassy vegetation at the Creek Plantation is about 14 years. The effective half-life of deer hunted on the SRS is about 15.5 years. After termination of all reactor activity by 1980, the Cs-137 activity began to drop drastically.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Use of an Alternative Conceptual Model of Vadose Zone Heterogeneity to Evaluate Past Tank Leaks and Other Unplanned Releases within a Tank Farm at the Hanford Site - 20061

Washington State Department of Ecology (Ecology) requested that U.S. Department of Energy (DOE)-Office of River Protection (ORP) consider an evaluation of effects of fine-grained thin sediment layers on transport with a separate alternative conceptual model in its evaluation of the potential impact of tank leaks and other unplanned releases within the tank farm at the Hanford Site. For this alternative model, Ecology recommended that the model be developed based on the general framework of fine-grained units identified by a stakeholder group in their interpretations of variability in moisture content data collected in the vicinity of Waste Management Area (WMA) C. In discussions with DOE-ORP, Ecology acknowledged that the underlying data and interpretations of the occurrence and lateral continuity of the fine-grained thin layers identified by a stakeholder group are uncertain. However, DOE-ORP agreed to Ecology's recommendation and has provided support for the requested evaluation that involved development of an alternative model based on the general framework of the unpublished report by the stakeholder. DOE-ORP considered this evaluation to be a hypothetical evaluation of vadose zone heterogeneities at WMA C. General observations from the range of simulation cases examined in the evaluation of the effects of hypothetical vadose zone heterogeneities at WMA C are as follows. - The movement of the center of mass of the simulated plumes was generally vertically downward below the source for all simulations, including those that incorporated the hypothetical fine-grained units. - All simulations that incorporated hypothetical heterogeneity produced additional plume spreading over what was produced in simulations using Equivalent Homogeneous Media (EHM) model(s)a. The spreading resulted in a broadening of the fringes of the plume, resulting in a wider region of low concentration, but lower peak concentrations associated with the center of mass of the plume. - Simulations that used the silty-sand hydraulic properties, suggested by Ecology for the hypothetical fine-grained units, generally produced similar spreading and slightly lower peak mass flux at the water table when compared to the EHM modeling results. a The EHM-based models used at WMA C do not explicitly include small-scale fine-grained heterogeneities used in the model advocated by Ecology. - Simulations that used the silty-sand hydraulic properties, suggested by Ecology for the hypothetical fine-grained units, generally produced less spreading and an earlier arrival of mass flux at the water table when compared to the use of another set of hydraulic properties from a silty-sand sample collected at a nearby disposal facility. - The EHM representation of the vadose zone generally produced higher peak mass flux and an earlier occurrence of peak fluxes at the water table compared to all analyses incorporating additional hypothetical heterogeneity. Results of this alternative model evaluation of past leaks provided some insight into the transport effects of vadose zone heterogeneities at WMA C that helped resolve Ecology's comments and issues related to the effects of vadose zone heterogeneities on past leaks and losses from the WMA C tank farms area. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Integrating Electrical Resistivity Tomography with Vadose Zone Characterization - 20246

The environmental management mission at the U.S. Department of Energy Hanford Site includes addressing subsurface contaminants that are present in the vadose zone because of historical waste discharges. Characterization is needed to support evaluation of whether contaminants at specific disposal sites will migrate to and contaminate the groundwater in the future. Drilling of boreholes and analysis of retrieved sediment samples is a standard approach to evaluating contaminant distribution in the vadose zone for the types of inorganic and radionuclide contaminants at the Hanford Site. However, borehole sampling has limitations for understanding the volumetric distribution of contaminants. The Hanford Site is now applying electrical resistivity tomography to characterize the path and volumetric extent of contaminant migration in the vadose zone. This information aids selection of appropriate locations for obtaining borehole samples and provides three-dimensional contaminant distribution information for incorporation into conceptual site models and to help configure fate and transport models. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

In-Situ Uranium Source Treatment Performance Assessment Elements - 20247

Field-scale in situ injection of an aqueous polyphosphate amendment was conducted to decrease uranium leaching from a vadose zone source to groundwater near the Columbia River at the U.S. Department of Energy's Hanford Site. After an initial phase of application in November 2015, this treatment was applied as an enhanced attenuation approach in September 2018, targeting uranium in a subsurface zone where water table periodically rises in response to the seasonal high river stage. Uranium within this zone is aqueous, adsorbed, and in low- and high-solubility precipitates and is mobilized into the groundwater at high river stage, resulting in a persistent groundwater plume. The polyphosphate amendment creates phosphate coatings on uranium (potentially including low solubility uranium-phosphate precipitates) that decrease the uranium leached into groundwater when the zone is periodically rewetted to improve the ability of natural attenuation to meet groundwater concentration objectives. For treatment, the amendment was injected into a network of wells within the periodically rewetted source area. Multiple lines of evidence are being applied to evaluate the performance of the phosphate treatment. Three elements of this performance assessment include 1) identifying the distribution of injected phosphate amendment to the targeted treatment zone using cross-borehole electrical resistivity tomography and comparisons of phosphate precipitates between pre- and post-treatment samples, 2) demonstrating the functional reduction in uranium mobility and leachability using laboratory tests with pre- and post- treatment sediments from the source zone, and 3) evaluating the presence of low-solubility uranium phosphate minerals and/or coatings associated with reduced uranium mobility. (authors)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Updates to a Preliminary Probabilistic Performance Assessment Model for Radiological and Chemical Contamination at the West Valley Site, New York - 20420

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351-ha site located approximately 48 km south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States at the WNYNSC. NFS built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg (640 metric tons) of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations halted in 1972 and never restarted, leaving behind radioactive and chemical wastes. The U.S. Department of Energy (DOE) was required to complete certain waste management activities under the West Valley Demonstration Project (WVDP) Act of 1980 including decommissioning of WVDP facilities. As collaborating agencies, NYSERDA and the DOE are tasked with making decisions about decommissioning and risk reduction for the West Valley Site. Neptune and Company, Inc. (Neptune) was contracted to develop a probabilistic performance assessment (PPA) model to assist the agencies in their decision making process for decommissioning the WVDP and WNYNSC. One important tool that is needed in order to inform the decision-making process is a science-based model of the West Valley Site that evaluates potential future consequences for human health and the environment. This forms the core of the spatial domain of the West Valley PPA Model. The PPA Model, developed using the GoldSim system modeling software, is a tool intended to provide support for decision making that evaluates uncertainty, in a manner that is transparent, defensible, and robust. The PPA Model includes contaminant transport and health effects components, and is organized around geographically-grouped contaminated facilities. These include the waste disposal areas licensed by the U.S. Nuclear Regulatory Commission and the State of New York, a waste tank farm for storage of high level radioactive waste resulting from reprocessing operations, and several areas contaminated with radioactive and chemical constituents. The PPA Model evaluates contaminant transport from these sources to points of exposure across the site and into receiving surface waters and sediments. Hypothetical people and wildlife could be exposed to contamination at these locations, and the effects of these exposures are evaluated. Contaminant transport processes to be evaluated in the PPA Model include groundwater and surface water transport, contaminant translocation by plants and animals, diffusion, and erosion. The evaluation of exposures to people in this preliminary model is limited to a resident farmer scenario, and ecological assessment is performed at the level of a screening analysis. The results of these preliminary evaluations inform future model developments. PPA Model results are subjected to sensitivity analysis in order to determine those pathways and parameters that are most significant in influencing the results. This information allows analysts and decision makers to focus on those aspects of Site behavior and processes. With this information, the decision makers can drive informed, defensible decisions regarding decommissioning of the Site. This paper includes an update of the information presented at WM2019 [1]. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Augmented Monitoring and Condition Assessment Program for SNF Wet Storage Life Extension - 20489

Approximately 27 MTHM of spent nuclear fuel (SNF) owned and managed by the U.S. Department of Energy, Office of Environmental Management is stored in the L Basin at the Savannah River Site (SRS). This 'DOE SNF' is comprised of approximately 12,000 aluminum-clad, aluminum-based fuel assemblies (∼7 MTHM), and approximately 2000 non-aluminum fuel assemblies (∼20 MTHM). A program is in progress to perform Non-Destructive Examination (NDE) of the fuel and their storage containers to characterize the materials' condition, and to evaluate the effects of service to enable continued safe wet storage of the SNF. The Augmented Monitoring and Condition Assessment Program (AMCAP), a two-part program to develop and implement remote underwater Non-Destructive Examination of the aluminum SNF, and of the containers of the non-aluminum SNF, respectively, is aimed at the characterization and evaluation of corrosion degradation of aluminum fuel and container materials. The predominant design of the aluminum SNF (ASNF) stored in L Basin is the Materials Test Reactor (MTR) equivalent design, a plate fuel design. These SNF are stored in 5'' diameter tubes or 5'' x 5'' squares (called bundles) that are nominally 12' or up to 14' long. The SNF is de-bundled and inspected using a custom-designed MTR Fuel Inspection Table. The inspection table provides for indexed fuel positioning for a video camera examination with controlled lighting. A total of 10 of the SNF originating from foreign research and test reactors were selected for examination based on burnup, enrichment, and prior damage caused by service/storage history. A special inspection campaign of these 10 assemblies is in progress. The observed corrosion damage included minor to moderate attack from general corrosion, pitting, crevice, end grain and galvanic corrosion. Example results from the completed inspections are shown and discussed. The focus is a comparison of the as-received condition versus the as-found current storage condition that will serve to validate Water Chemistry and Corrosion Monitoring Programs. The non-aluminum SNF (NASNF) stored in L Basin are of diverse design that includes various geometries with claddings of stainless steel, Zircaloy, and Hastelloy. The fuel core materials include uranium alloys, oxides/mixed oxides, and carbides. These SNF materials, originating from early experimental and test reactors, are in various physical forms including single fuel elements and cut pieces. The fuel is stored in L Basin in various configurations including in direct bundled storage in aluminum tubes and in isolation cans that are in the bundles or in a larger over-size storage container (OSC). Concern with inside-out corrosion and the potential loss of configuration control and ability to handle the storage containers prompted the development of remote NDE methods that include visual and UT technologies to assess the condition of the containers. Candidate stored materials were selected for a special inspection campaign; the development of the NDE methods for the inspection for galvanic, crevice and sediment-induced corrosion (inside-out) are discussed. A summary of the SNF storage in L Basin at the SRS, and an overview of the AMCAP to enable continued safe storage of DOE SNF are described. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

A Dose Assessment Model for Radioactive Waste Exposed by Gully Erosion at West Valley - 20513

The Western New York Nuclear Service Center (WNYNSC), located approximately 48 km south of Buffalo, New York, is the site of a former nuclear fuel reprocessing and radioactive waste disposal facility. Spent nuclear fuel was processed there from 1966 to 1972, leaving behind radioactive and chemical wastes in two disposal areas and a waste tank farm. Site operations also resulted in releases of radioactivity to site soils, groundwater, and to surface waters draining the site. The New York State Energy Research and Development Authority (NYSERDA) and the U.S. Department of Energy (DOE) are collaborating in a process of decision making for decommissioning those facilities remaining at the WNYNSC following the completion of Phase 1 decommissioning. Neptune and Company, Inc. (Neptune) was contracted to develop a probabilistic performance assessment (PPA) computer model to assist the agencies in this process. The PPA Model includes a contaminant transport component focusing on the movement of contaminants within and among environmental media including groundwater and surface water transport, contaminant translocation by plants and animals, diffusion, and erosion. The model also includes evaluation of potential exposure and health effects for a Resident Farmer exposure scenario, where the Resident Farmer represents a critical group, described as that group of individuals reasonably expected to receive the greatest exposure to residual radioactivity for any applicable set of circumstances. The West Valley Site is located in the glaciated Allegheny Plateau region of western New York State. The waste reprocessing and disposal areas were constructed on a relatively fat area of plateau dissected by drainages of Buttermilk Creek, including Erdman Brook, Franks Creek, and Quarry Creek. An important aspect of the contaminant transport component of the PPA model is consideration of erosive processes such as slumping of the stream slopes and the advance of gullies from these streams. These erosion processes remove material from the plateau, growing the size of the creek valleys and making them wider and deeper. Of particular interest for the impact of erosion is radioactive waste contained in the Nuclear Regulatory Commission (NRC)-Licensed Disposal Area (NDA), the New York State-Licensed Disposal Area (SDA), and residual radiological inventory in the underground storage tanks at the Waste Tank Farm (WTF). The PPA Model is organized around geographically-defined facilities which were constructed upon the plateau, including the NDA, SDA, and WTF. Ongoing stream erosion processes will potentially transfer radioactive waste and residual inventory from these facilities to the ground surface on adjacent hillslope areas where erosion has breached the facility. Hence, it is important to evaluate the consequences of potential exposures to a Resident Farmer on the hillslopes below a breached facility. Two interrelated aspects of the dose assessment model related to hillslope exposure are discussed: 1) representation of the physical processes related to transport of radionuclides from facilities onto the hillslopes, and from the hillslopes into adjoining creeks where contaminated material migrates downstream with surface water and sediment, and; 2) adaptation of the activities associated with the Resident Farmer scenario to assess potential exposures to contamination in the hillslope areas. This discussion will cover the conceptual basis of the hillslope exposure and transport models, and also implementation in the PPA computer model. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

The Blanket Effect: How Turning the World Upside Down Reveals the Nature of Graphene Oxide Cytocompatibility

Extensive cytocompatibility testing of 2D nanocarbon materials including graphene oxide (GO) has been performed, but results remain contradictory. Literature has yet to account for settling—although sedimentation is visible to the eye and physics suggests that even individual graphenic flakes will settle. To investigate settling, a series of functional graphenic materials (FGMs) with differing oxidation levels, functionalities, and physical dimensions were synthesized. Though zeta potential indicated colloidal stability, significant gravitational settling of the FGMs was theoretically and experimentally demonstrated. By creating a setup to culture cells in traditional and inverted orientations in the same well, a “blanket effect” was unequivocally demonstrated in which FGMs settle out of solution and cover cells at the bottom of the well, limiting nutrient exchange and viability. Inverted cells protected from the blanket effect are unaffected. Therefore, these results demonstrate that settling is a crucial factor that must be considered for FGM cytocompatibility experiments.

Holt, Brian D.↗
DOE OSTI2023

Tailoring Chemical Absorption-Precipitation to Lower the Regeneration Energy of a CO 2 Capture Solvent

Solvent-based CO 2 capture consumes significant amounts of energy for solvent regeneration. To improve energy efficiency, this study investigates CO 2 fixation in a solid form through solvation, followed by ionic self-assembly-aided precipitation. Based on the hypothesis that CO 3 2- ions may bind with monovalent metal ions, we introduced Na + into an aqueous hexane-1,6-diamine solution where CO 2 forms carbamate and bicarbonate. Then, Na + ions in the solvent act as a seed for ionic self-assembly with diamine carbamate to form an intermediate ionic complex. The recurring chemical reactions lead to the formation of an ionic solid from a mixture of organic carbamate/carbonate and inorganic sodium bicarbonate (NaHCO 3 ), which can be easily removed from the aqueous solvent through sedimentation or centrifugation and heated to release the captured CO 2 . Mild-temperature heating of the solids at 80–150 °C causes decomposition of the solid CO 2 -diamine-Na molecular aggregates and discharge of CO 2 . This sorbent regeneration process requires 6.5–8.6 GJ/t CO 2 . It was also found that the organic carbamate/carbonate solid, without NaHCO 3 , contains a significant amount of CO 2 , up to 6.2 mmol CO 2 /g-sorbent, requiring as low as 2.9–5.8 GJ/t CO 2 . In conclusion, molecular dynamic simulations support the hypothesis of using Na + to form relatively less stable, yet sufficiently solid, complexes for the least energy-intensive recovery of diamine solvents compared to bivalent carbonate–forming ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Estimation of pollen productivity and dispersal: How pollen assemblages in small lakes represent vegetation

Abstract Quantitative understanding of vegetation dynamics over timespans beyond a century remains limited. In this regard, the pollen‐based reconstruction of past vegetation enables unique research opportunities by quantifying changes in plant community compositions during hundreds to thousands of years. Critically, the methodological basis for most reconstruction approaches rests upon estimates of pollen productivity and dispersal. Previous studies, however, have reached contrasting conclusions concerning these estimates, which may be perceived to challenge the applicability and reliability of pollen‐based reconstruction. Here we show that conflicting estimates of pollen production and dispersal are, at least in part, artifacts of fixed assumptions of pollen dispersal and insufficient spatial resolution of vegetation data surrounding the pollen‐collecting lake. We implemented a Bayesian statistical model that related pollen assemblages in surface sediments of 33 small lakes (<2 ha) in the northeastern United States, with surrounding vegetation ranging from 10 1 to >10 5 m from the lake margin. Our analysis revealed three key insights. First, pollen productivity is largely conserved within taxa and across forest types. Second, when local (within a 1‐km radius) vegetation abundances are not considered, pollen‐source areas may be overestimated for some common taxa (Cupressaceae, Pinus , Quercus , and Tsuga ). Third, pollen dispersal mechanisms may differ between local and regional scales; this is missed by pollen‐dispersal models used in previous studies. These findings highlight the complex interactions between vegetation heterogeneity on the landscape and pollen dispersal. We suggest that, when estimating pollen productivity and dispersal, both detailed local and extended regional vegetation must be taken into account. Also, both deductive (mechanistic models) and inductive (statistical models) approaches are needed to better understand the emergent properties of pollen dispersal in heterogeneous landscapes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Whole plant traits of coastal dune vegetation and implications for interactions with dune dynamics

Abstract Coastal dunes are important protective features against sea level rise and coastal storms. Interactions between dune plant aboveground structures and sediment trapping that allow for dune building and maintenance are well established. More recently, studies documenting belowground biomass for promoting erosion resistance in dominant dune species have been conducted, yet a knowledge gap remains regarding species‐specific characterization of whole plants, specifically with respect to roots, rhizomes, and belowground stems. Our objective was to quantify above‐ and belowground traits of four dominant dune grasses to document the potential for species‐specific effects on dune growth, maintenance, and erosion resistance. We examined above‐ and belowground traits among four prominent dune grasses of the Atlantic and Gulf Coasts of North America: Ammophila breviligulata , Panicum amarum , Spartina patens , and Uniola paniculata . Whole plant samples of each species were collected from the foredune at the US Army Engineer Research and Development Center's Field Research Facility in Duck, North Carolina, USA, and quantified for several above‐ and belowground traits (e.g., stem height, rhizome number and length, root surface area by diameter class, root tensile strength, and mycorrhizal percent infection). Belowground factors known to impact important dune processes, such as rhizome length, mycorrhizal percent infection, and root traits, differed substantially among species. When visualized in multivariate space, all species significantly differed in suites of above‐ and belowground traits. When considering belowground only, Ammophila and Spartina were similar, despite differences in biomass allocation. Species separated along axes related to mycorrhizal association, biomass allocation, and root construction. The four co‐occurring dune grass species were dissimilar in suites of plant traits. Belowground trait differences were driven by those describing root construction, biomass allocation, and mycorrhizal infection. Dissimilarity in above‐ and belowground suites of traits may demonstrate different approaches for surviving the dune environment. Incorporating belowground traits into modeling will enhance predictions of dune response to climate change through interactions between vegetation and dune dynamics that facilitate coastal resistance and resilience.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Impact of the Three Gorges Dam on riverbed scour and siltation of the middle reaches of the Yangtze River

Abstract This study investigated the influence of the Three Gorges Dam (TGD) on the evolution of nearby channels in the Yangtze River (Changjiang River) system in order to better understand the environmental impact of large‐scale reservoir operations. From 2003 to 2017, the amounts of runoff and sediment transport in the Yangtze River were reduced by 3.3–14.5% and 67.8–92.7%, respectively, relative to 1955–2002 before the TGD was operational. Topographic measurements of the middle reaches (Yichang to Hukou) of the Yangtze River were analyzed from 1975 to 2017, during which time the cumulative erosion of the flood channel was 22.78 × 10 8 m 3 , and the dry channel accounted for 90.3% of the erosion. Following commissioning of the TGD, the scouring intensity of the sandy gravel section near the dam initially increased then decreased, whereas the scouring intensity of sandy sections away from the dam continued to increase. Beaches on convex banks of curved sections were scoured, and deep channels on concave banks became silted. In braided sections, the braids tended to shrink, and the diversion ratio of the main branch during dry seasons reduced, resulting in frequent branch alternation. Compared to changes in the downstream river channels of other large reservoirs worldwide, scouring from the TGD is extensive. The findings of this study are significant for river channel regulation and waterway planning in the Yangtze River and worldwide.

Yang, Yunping↗
DOE OSTI2023

Mapping existing wellbore locations to compare technical risks between onshore and offshore CCS activities in Texas

Carbon dioxide capture and geologic storage (CCS; geologic sequestration) is a promising technology for reducing anthropogenic greenhouse gas emissions to the atmosphere from industrial point sources. Aspects of CCS have been investigated for over two decades, and many large- and small-scale geologic storage field demonstration projects are now underway globally. Interest in offshore CCS has been increasing in recent years (e.g., European Union, Australia, Japan, and the United States). Deep geologic storage in offshore settings is analogous to onshore CCS activities in many respects (i.e., geologic and geotechnical aspects), but is distinct from previously explored seabed sediment CO 2 storage) or deep marine dissolution). Given the large subsurface geologic storage volumes available in offshore settings, much discussion of offshore CCS is focused on the benefits and risks of such activity compared to onshore settings. Similar to onshore settings, existing (legacy) wells likely present the most direct migration pathway and largest risk of noncontainment in offshore settings. As part of current studies to evaluate geologic storage options in offshore settings along the Texas coast and greater Gulf of Mexico (GoM), mapping of the geographic distribution and ages of wells in a region containing coastal counties and extending 30 miles offshore Texas indicates that both well spatial density and well age decrease moving from onshore to offshore. Results suggest reduced risk of leakage owing to more rigorous and documented well completion and abandonment practices for these generally younger wells (although many are decades old). A result of decreased well density is that larger areas are available for leasing for CCS projects that avoid legacy wells altogether (> 1 mile from any existing well). The one-mile designation is used as an arbitrary convention, and while it is recognized that this is smaller than a typical area of review (AoR) for permitting, each site will have a different AoR radius for consideration. Finally, the combination of large subsurface storage volumes under control of a single landowner and reduced risks from legacy wells makes offshore CCS attractive in the GoM.

58 GEOSCIENCES↗
DOE OSTI2024

Geochemical assessment of mineral sequestration of carbon dioxide in the midcontinent rift

Abstract This study examines the potential of Midcontinent Rift rocks to facilitate long‐term CO 2 sequestration by providing the necessary Ca and Mg for carbonate mineralization. Surface samples were collected from the Oronto and Bayfield‐Jacobsville Groups around Lake Superior and used for petrography and X‐ray diffraction to determine their mineral composition. Also, X‐ray fluorescence was also used to assess their bulk chemical composition. The samples were then exposed to CO 2 and deionized water in Teflon‐lined vessels at 90°C, and the resulting leachate fluids were analyzed for the cation released during the testing. SEM microscopy was used to examine the samples for potential mineralization of carbonate minerals. The Oronto Group sediments consist primarily of feldspathic to feldspathic lithic arenites with a chlorite‐dominated matrix, and the primary porosity is blocked by calcite and hematite cement. The Bayfield–Jacobsville sequences are porous quartz arenites to feldspathic quartz arenites that do not contain significant accumulation of Ca‐, Mg‐, and Fe‐bearing minerals. The leachate fluids obtained from Oronto Group samples exhibit a maximum Ca release rate (5.2 × 10 −4 mole/cm 2 .day), indicating rapid calcite cement dissolution and increased porosity and permeability. SEM/EDS microanalysis revealed areas where pore‐filling calcite was preferentially dissolved. Longer‐term rock‐water reactions resulted in induced carbonate mineralization, as evidenced by calcite crystals observed in a sample reacted for 102 days. © 2024 Society of Chemical Industry and John Wiley & Sons, Ltd.

Energy & Fuels↗
DOE OSTI2021

The Wasatch Environmental Observatory: A mountain to urban research network in the semi‐arid western US

Abstract The 2085 km 2 Jordan River Basin, and its seven sub‐catchments draining the Central Wasatch Range immediately east of Salt Lake City, UT, are home to an array of hydrologic, atmospheric, climatic and chemical research infrastructure that collectively forms the Wasatch Environmental Observatory (WEO). WEO is geographically nested within a wildland to urban land‐use gradient and built upon a strong foundation of over a century of discharge and climate records. A 2200 m gradient in elevation results in variable precipitation, temperature and vegetation patterns. Soil and subsurface structure reflect systematic variation in geology from granitic, intrusive to mixed sedimentary clastic across headwater catchments, all draining to the alluvial or colluvial sediments of the former Lake Bonneville. Winter snowfall and spring snowmelt control annual hydroclimate, rapid population growth dominates geographic change in lower elevations and urban gas and particle emissions contribute to episodes of severe air pollution in this closed‐basin. Long‐term hydroclimate observations across this diverse landscape provide the foundation for an expanding network of infrastructure in both montane and urban landscapes. Current infrastructure supports both basic and applied research in atmospheric chemistry, biogeochemistry, climate, ecology, hydrology, meteorology, resource management and urban redesign that is augmented through strong partnerships with cooperating agencies. These features allow WEO to serve as a unique natural laboratory for addressing research questions facing seasonally snow‐covered, semi‐arid regions in a rapidly changing world and an excellent facility for providing student education and research training.

Follstad Shah, Jennifer J.↗
DOE OSTI2024

Modeling the impact of measured and projected climate and management systems on agricultural fields: Surface runoff, soil moisture, and soil erosion

Abstract As global climate change poses a challenge to crop production, it is imperative to prioritize effective adaptation of agricultural systems based on a scientific understanding of likely impacts. In this study, we applied an integrated watershed modeling framework to examine the impacts of projected climate on runoff, soil moisture, and soil erosion under different management systems in Central Oklahoma. The proposed model uses measured climate data and three downscaled ensembles from the Coupled Model Intercomparison Project Phase 6 (CMIP6) at the water resources and erosion watershed to understand the impact of climate change and various climate conditions under three management systems: (1) continuous winter wheat (Triticum aestivum) under conventional tillage (WW‐CT; baseline system), (2) continuous winter wheat under no‐till (WW‐NT), and (3) cool and warm season forage cover crop mixes under no‐till (CC‐NT). The study indicates that the occurrence of agricultural drought is projected to increase while erosion rates will remain unchanged under the WW‐CT. In contrast, climate simulations imposed on the WW‐NT and CC‐NT systems significantly reduce runoff and sediment while preserving soil moisture levels. Especially, implementing the CC‐NT system can bolster food security and foster sustainable farming practices in Central Oklahoma in the face of a changing climate.

Environmental Sciences & Ecology↗