Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLIDIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Densities of Pb-Sn alloys during solidification

Data for the densities and expansion coefficients of solid and liquid alloys of the Pb-Sn system are consolidated in this paper. More importantly, the data are analyzed with the purpose of expressing either the density of the solid or of the liquid as a function of its composition and temperature. In particular, the densities of the solid and of the liquid during dendritic solidification are derived. Finally, the solutal and thermal coefficients of volume expansion for the liquid are given as functions of temperature and composition.

Poirier, D. R.↗
NASA NTRS1988

Effects of crucible wetting during solidification of immiscible Pb-Zn

Many industrial uses for liquid phase miscibility gap alloys are proposed. However, the commercial production of these alloys into useful ingots with a reasonable amount of homogeneity is arduous because of their immiscibility in the liquid state. In the low-g environment of space gravitational settling forces are abated, thus solidification of an immiscible alloys with a uniform distribution of phases becomes feasible. Elimination of gravitational settling and coalescence processes in low-g also makes possible the study of other separation and coarsening mechanisms. Even with gravitational separation forces reduced, many low-g experiments have resulted in severely segregated structures. The segregation in many cases was due to preferential wetting of the crucible by one of the immiscible liquids. The objective was to analyze the wetting behavior of Pb-Zn alloys on various crucible materials in an effort to identify a crucible in which the fluid flow induced by preferential wetting is minimized. It is proposed that by choosing the crucible for a particular alloy so that the difference in surface energy between the solid and two liqud phases is minimized, the effects of preferential wetting can be diminished and possibly avoided. Qualitative experiments were conducted and have shown the competitive wetting behavior of the immiscible Pb-Zn system and 13 different crucible materials.

Degroh, Henry C., III↗
NASA NTRS1988

Dendritic solidification of alloys in low gravity

The effect of low gravity during solidification on primary and secondary dendrite spacings is investigated. Dendritic spacing data for iron-carbon-type alloys and superalloys which were directionally solidified during aircraft low-g trajectories are examined. The low-g data data are compared with data for metal model materials and binary alloys, and theoretical models to explain the dendritic spacing are considered.

Curreri, P. A.↗
NASA NTRS1988

Directional solidification of lead-copper immiscible alloys in a cyclic gravity environment

Hypermonotectic copper-lead alloys were directionally solidified at unit gravity on earth and also in the cyclic gravitational environment attainable during flight of NASA's KC-135 aircraft. In both cases macrosegregation developed that consisted of an initial lead-rich phase above which an aligned composite structure of apparent monotectic composition grew. Differences within these regions are examined, and the suitability of the KC-135 environment for directional solidification of monotectic alloys is discussed.

Shah, S.↗
NASA NTRS1989

Effects of crucible wetting during solidification of immiscible Pb-Zn alloys

Many industrial uses for liquid phase miscibility gap alloys are proposed. However, the commercial production of these alloys into useful ingots with a reasonable amount of homogeneity is arduous because of their immiscibility in the liquid state. In the low-g environment of space gravitational settling forces are abated, thus solidification of an immiscible alloy with a uniform distribution of phases becomes feasible. Elimination of gravitational settling and coalescence processes in low-g also makes possible the study of other separation and coarsening mechanisms. Even with gravitational separation forces reduced, many low-g experiments have resulted in severely segregated structures. The segregation in many cases was due to preferential wetting of the crucible by one of the immiscible liquids. The objective was to analyze the wetting behavior of Pb-Zn alloys on various crucible materials in an effort to identify a crucible in which the fluid flow induced by preferential wetting is minimized. It is proposed that by choosing the crucible for a particular alloy so that the difference in surface energy between the solid and two liquid phases is minimized, the effects of preferential wetting can be diminished and possibly avoided. Qualitative experiments were conducted and have shown the competitive wetting behavior of the immiscible Pb-Zn system and 13 different crucible materials.

De Groh, H. C., III↗
NASA NTRS1989

Buoyancy effects on morphological instability during directional solidification

The onset of morphological instability during the directional solidification of a single-phase binary alloy at constant velocity vertically upwards is treated by a linear stability analysis. The case in which a heavier solute is rejected at the solidifying interface is considered, and the effect of natural convection on the critical concentration for the onset of instability is studied. For tin containing lead, a small destabilization of the system at low growth velocities, and a large increase in the wavelength of the instability at the onset are found. Calculations show that the destabilization is enhanced as the variation of density with solute concentration is reduced, and in the limit of neutrally-dense solute, there is a long wavelength instability for which the critical solute concentration is several orders of magnitude lower than that predicted by the Mullins and Sekerka (1964) analysis in the absence of convection. For the neutrally-dense solute, a simplified analysis indicates the roles played by the interface deformation and thermal convection in promoting the instability. In particular, the destabilization is very sensitive to the ratio of crystal and melt thermal conductivities.

Coriell, S. R.↗
NASA NTRS1989

Morphological transitions in the rapid solidification regime - A re-examination of the fundamental validity of the absolute stability concept of Mullins and Sekerka

The validity of the notion of absolute stability (AS) of a planar solid-liquid interface, proposed by Mullins and Sekerka (M-S, 1964), was tested using experimental data obtained for a number of dilute Ag-Cu and Sn-In alloys and for ultrahigh-purity succinonitrile. It is shown that the restriction applied by the M-S theory is satisfied during the steady-state planar solidification in an undercooled melt, provided the undercooling is quite small. The findings obtained on the Ag-Cu and Sn-In alloys are compared with early measurements by Davis and Fryzuk (1971) in dilute Sn-In alloys with 25 to 400 ppm additions of In.

Laxmanan, V.↗
NASA NTRS1989

Measurements of diffusion limited solidification at varying gravity

The environment of the NASA KC-135 low gravity aircraft was employed to examine the effects of g-jitter on the growth of a solidification diffusion layer for 28 wt pct NH4Cl-H2O, a metal alloy model material. The hypothesis that jitter (vibrational) effects account for previously observed low gravity growth anomalies was investigated by comparing optical data (central dark ground method) for 10-squared g(e) (earth's gravity) KC-135 growth conditions and 1 g(e) laboratory conditions. Accelerometer data obtained during the flight program showed the KC-135 low gravity environment to have extreme levels of jitters.

Mccay, T. D.↗
NASA NTRS1989

Mixed gravity mode growth during directional dendritic solidification aboard the KC-135

NASA's KC-135, which flies a cyclic parabolic route designed to furnish periods of low gravity alternating with periods of high gravity, has been used to directionally solidify a superalloy and a FE-C-Si alloy. Probable transient effects, due to the rapid changes in the gravity levels, must be taken into account. An effort is presently made to show that experimental design is especially critical in the case of dendritic directional solidification experiments in which mixed gravity modes occur; inappropriate design easily leads to anomalous structures and data.

Grugel, Richard N.↗
NASA NTRS1990

Directional Solidification Of Monotectic Alloys

Conditions promoting formation of aligned fibers sought. Report describes experiments in directional solidification of Cu/Pb and Bi/Ga monotectic alloys. Study motivated by need to understand physical mechanism governing formation of rodlike or fiberlike aligned structures in solidifying alloy and to determine process conditions favoring such structures.

Dhindaw, B. K.↗
NASA NTRS1989

Influence of non steady gravity on natural convection during micro-gravity solidification of semiconductors. I - Time scale analysis. II - Implications for crystal growth experiments

Consideration is given to the influence of temporal variations in the magnitude of gravity on natural convection during unidirectional solidification of semiconductors. It is shown that the response time to step changes in g at low Rayleigh numbers is controlled by the momentum diffusive time scale. At higher Rayleigh numbers, the response time to increases in g is reduced because of inertial effects. The degree of perturbation of flow fields by transients in the gravitational acceleration on the Space Shuttle and the Space Station is determined. The analysis is used to derive the requirements for crystal growth experiments conducted on low duration low-g vehicles. Also, the effectiveness of sounding rockets and KC-135 aircraft for microgravity experiments is examined.

Griffin, P. R.↗
NASA NTRS1989

The modelling of heat, mass and solute transport in solidification systems

The aim of this paper is to explore the range of possible one-phase models of binary alloy solidification. Starting from a general two-phase description, based on the two-fluid model, three limiting cases are identified which result in one-phase models of binary systems. Each of these models can be readily implemented in standard single phase flow numerical codes. Differences between predictions from these models are examined. In particular, the effects of the models on the predicted macro-segregation patterns are evaluated.

Voller, V. R.↗
NASA NTRS1990

Hydrodynamic interactions in directional solidification

A binary liquid undergoes unidirectional solidification. The one-dimensional steady state is susceptible to morphological instability that causes the solid/liquid interface to change from a planar state to a cellular pattern. This paper examines the effects on this transition of volume-change convection, buoyancy-driven convection or forced flows. It emphasizes how flows alter stability limits, create scale and pattern changes in morphology, and create, through coupling, new instabilities. Emphasis is placed on the physical mechanisms of the interactions.

Davis, Stephen H.↗
NASA NTRS1990

Transient magmatic convection prolonged by solidification

Fluid dynamic experiments have been conducted on the solidification of a paraffin layer, in order to elucidate the transient stage of convection created in cooling magma by the fact that strong changes in viscosity with crystallization lock up within an inwardly propagating crust much buoyancy that would otherwise be available to drive convection. The interior of the magma remains isothermal, and the temperature decreases uniformly until it is locked at the convective liquidus; the crystals are fine hairlike dendrites without major compositional differentiations. Measurements over time are presented of crust thickness, convective velocity, and heat transfer.

Brandeis, Genevieve↗
NASA NTRS1990

Multiple sensor multifrequency eddy current monitor for solidification and growth

A compact cylindrical multisensor eddy current measuring system with integral furnace was develop to monitor II-VI crystal growth to provide interfacial information, solutal segregation, and conductivities of the growth materials. The use of an array of sensors surrounding the furnace element allows one to monitor the volume of interest. Coupling these data with inverse multifrequency analysis allows radial conductivity profiles to be generated at each sensor position. These outputs were incorporated to control the processes within the melt volume. The standard eddy current system functions with materials whose electric conductivities are as low as 2E2 Mhos/m. A need was seen to extend the measurement range to poorly conducting media so the unit was modified to allow measurement of materials conductivities 4 order of magnitude lower and bulk dielectric properties. Typically these included submicron thick films and semiinsulating GaAs. This system was used to monitor complex heat transfer in grey bodies as well as semiconductor and metallic solidification.

Wallace, John↗
NASA NTRS1990

Morphological instability in rapid directional solidification

Mullins and Sekerka (1964) showed for fixed temperature gradient that the planar interface is linearly stable for all pulling speeds V above some critical value, the absolute stability limit. Near this limit, where solidification rates are rapid, the assumption of local equilibrium at the interface may be violated. Here, nonequilibrium effects are incorporated into a linear stability analysis of the planar front by allowing the segregation coefficient and interface temperature to depend on V in a thermodynamically consistent way. The absolute stability limit of the cellular mode is modified. A new oscillatory state is formed which, in the absence of latent heat, has a critical wavenumber of zero; by itself this instability would lead to the formation of solute bands in the solid. This mode has its own absolute-stability limit determined by solute trapping and kinetics. Under certain conditions, there exists a window of stability above the steady absolute-stability boundary and below the oscillatory-stability boundary; here the planar segregation-free state is restabilized.

Merchant, G. J.↗
NASA NTRS1990

Directional solidification of a planar interface in the presence of a time-dependent electric current

Directional solidification of pure materials and binary alloys with a planar crystal-metal interface in the presence of a time-dependent electric current is considered. For a variety of time-dependent currents, the temperature fields and the interface velocity as functions of time are presented for indium antimonide and bismuth and for the binary alloys germanium-gallium and tin-bismuth. For the alloys, the solid composition is calculated as a function of position. Quantitative predictions are made of the effect of an electrical pulse on the solute distribution in the solidified material.

Brush, L. N.↗
NASA NTRS1991

Experimental study of directional solidification of aqueous ammonium chloride solution

Directional solidification experiments have been carried out using the analog casting system of NH4Cl-H2O solution by cooling it from below with a constant-temperature surface ranging from -31.5 C to +11.9 C. The NH4Cl concentration was 26 percent in all solutions, with a liquidus temperature of 15 C. It was found that finger convection occurred in the fluid region just above the mushy layer in all experiments. Plume convection with associated chimneys in the mush occurred in experiments with bottom temperatures as high as +11.0 C. However, when the bottom temperature was raised to +11.9 C, no plume convection was observed, although finger convection continued as usual. A method has been devised to determine the porosity of the mush by computed tomography. Using the mean value of the porosity across the mush layer and the permeability calculated by the Kozeny-Carman relationship, the critical solute Rayleigh number across the mush layer for onset of plume convection was estimated to be between 200 and 250.

Chen, C. F.↗