Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SINTERED MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Magnetic properties of Co-Zr-B magnets produced by spark plasma sintering method

Magnets of Co-Zr-B, one of the permanent magnetic compounds without rare-earth elements, were successfully produced by the spark plasma sintering method. The resultant Co-Zr-B magnets had high densities of 92%–96% and consisted mainly of the Co{sub x}Zr (x ≈ 5) phase. The coercivity of the Co-Zr-B magnets was highly dependent on the consolidation temperature and the boron content. The highest maximum energy product of 6.0 MGOe, with a remanence of 6.4 kG and the coercivity of 4.0 kOe, was achieved by the Co{sub 80}Zr{sub 18}B{sub 2} magnets consolidated at 873 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and thermoelectric properties of fine-grained TiNiSn compounds

Nearly single-phased TiNiSn half-Heusler compound thermoelectric materials were synthesized by combining mechanical alloying (MA) and spark plasma sintering (SPS) in order to reduce its thermal conductivity by refining the grain sizes. Although TiNiSn compound powders were not synthesized directly via MA, dense bulk samples of TiNiSn compound were obtained by the subsequent SPS treatment. It was found that an excessive Ti addition relative to the TiNiSn stoichiometry is effective in increasing the phase purity of TiNiSn half-Heusler phase in the bulk samples, by compensating for the Ti loss caused by the oxidation of Ti powders and MA processing. The maximum power factor value obtained in the Ti-compensated sample is 1720 muW m{sup -1} K{sup -2} at 685 K. A relatively high ZT value of 0.32 is achieved at 785 K for the present undoped TiNiSn compound polycrystals. - Graphical abstract: Nearly single-phased TiNiSn-based half-Heusler compound polycrystalline materials with fine grains were fabricated by combining mechanical alloying (MA) and spark plasma sintering (SPS). A high ZT value for undoped TiNiSn was obtained because of the reduced thermal conductivity.

36 MATERIALS SCIENCE↗

Rapid sintering of TiO{sub 2} photoelectrodes using intense pulsed white light for flexible dye-sensitized solar cells

Intense pulsed white light (IPWL) sintering was carried out at room temperature, which is suitable dye-sensitized solar cells (DSSCs) fabrication process on plastic substrates for the mass production. Five seconds irradiation of IPWL on TiO{sub 2} electrode significantly improves the photocurrent density and power conversion efficiency of DSSCs by more than 110% and 115%, respectively, compared to the DSSCs without IPWL treatment. These improvements were mainly attributed to the enhanced interconnection between the TiO{sub 2} nanoparticles induced by IPWL illumination, which is confirmed by the impedance spectra analysis.

36 MATERIALS SCIENCE↗

High Temperature Integrated Thermoelectric Ststem and Materials

The final goal of this project is to produce, by the end of Phase II, an all ceramic high temperature thermoelectric module. Such a module design integrates oxide ceramic n-type, oxide ceramic p-type materials as thermoelectric legs and oxide ceramic conductive material as metalizing connection between n-type and p-type legs. The benefits of this all ceramic module are that it can function at higher temperatures (> 700 C), it is mechanically and functionally more reliable and it can be scaled up to production at lower cost. With this all ceramic module, millions of dollars in savings or in new opportunities recovering waste heat from high temperature processes could be made available. A very attractive application will be to convert exhaust heat from a vehicle to reusable electric energy by a thermoelectric generator (TEG). Phase I activities were focused on evaluating potential n-type and p-type oxide compositions as the thermoelectric legs. More than 40 oxide ceramic powder compositions were made and studied in the laboratory. The compositions were divided into 6 groups representing different material systems. Basic ceramic properties and thermoelectric properties of discs sintered from these powders were measured. Powders with different particles sizes were made to evaluate the effects of particle size reduction on thermoelectric properties. Several powders were submitted to a leading thermoelectric company for complete thermoelectric evaluation. Initial evaluation showed that when samples were sintered by conventional method, they had reasonable values of Seebeck coefficient but very low values of electrical conductivity. Therefore, their power factors (PF) and figure of merits (ZT) were too low to be useful for high temperature thermoelectric applications. An unconventional sintering method, Spark Plasma Sintering (SPS) was determined to produce better thermoelectric properties. Particle size reduction of powders also was found to have some positive benefits. Two composition systems, specifically 1.0 SrO - 0.8 x 1.03 TiO2 - 0.2 x 1.03 NbO2.5 and 0.97 TiO2 - 0.03 NbO2.5, have been identified as good base line compositions for n-type thermoelectric compositions in future module design. Tests of these materials at an outside company were promising using that company's processing and material expertise. There was no unique p-type thermoelectric compositions identified in phase I work other than several current cobaltite materials. Ca3Co4O9 will be the primary p-type material for the future module design until alternative materials are developed. BaTiO3 and rare earth titanate based dielectric compositions show both p-type and n-type behavior even though their electrical conductivities were very low. Further research and development of these materials for thermoelectric applications is planned in the future. A preliminary modeling and optimization of a thermoelectric generator (TEG) that uses the n-type 1.0 SrO - 1.03 x 0.8 TiO2 - 1.03 x 0.2 NbO2.5 was performed. Future work will combine development of ceramic powders and manufacturing expertise at TAM, development of SPS at TAM or a partner organization, and thermoelectric material/module testing, modeling, optimization, production at several partner organizations.

25 ENERGY STORAGE↗

System and method for nuclear reactor fuel having freeze-cast matrix impregnated with nucleotide-rich material

A multiphase composite, formed by freeze-casting, lyophilization, and sintering, has sintered particles forming a scaffold having at least one region of aligned porosity; and a second phase formed in pores of the scaffold. In a particular embodiment, the second phase is a nuclear fuel, in another, the first phase is a nuclear fuel, and in others, both phases are nuclear fuels. In some embodiments, the first phase is a ceramic, and in other embodiments a metal such as stainless steel. In other embodiments, the second phase is a metal, and in other embodiments a ceramic. In some embodiments the second phase is positioned in a subset of pores of the scaffold, at least some additional pores being filled with a third phase. In embodiments, the second phase is also sintered.

Wegst, Ulrike G. K.↗

The role of dopant charge state on defect chemistry and grain growth of doped UO 2

Additives are widely used to control the microstructure of materials via their effect on defect chemistry during sintering. As the primary nuclear fuel, the properties of UO 2 are crucial for safe and efficient reactor operation. UO 2 has been manipulated by fuel vendors through doping to enhance grain size to provide improved fission gas retention and plasticity. In this work the common phenomenon that governs the effect of Mg, Ti, V, Cr, Mn, and Fe doping of UO 2 for enhanced grain growth is revealed, elucidating experimental observations. A combined density functional theory and empirical potential description of defect free energy is used to calculate the doped UO 2 defect concentrations as a function of temperature. At high (sintering) temperatures all dopants studied transition to a positively charged interstitial defect. Furthermore, a number of dopants (Ti, V, Cr, and Mn) do so in sufficiently high concentrations to greatly increase the negatively charged uranium vacancy concentration. High uranium vacancy concentrations can enhance grain growth and fission gas diffusion. Mg and Fe also enhance uranium vacancy concentrations but to a lesser extent, while Al has no impact. The enhanced uranium vacancy concentrations, associated with solution of dopants interstitially, is proposed as the mechanism responsible for the enlarged grains seen experimentally in (Ti/V/Cr/Mg)-doped systems. Mn- and V-doped UO 2 have been predicted to have higher uranium vacancy concentrations than the more widely used Cr-doped UO 2 , leading to higher grain growth and fission gas diffusivity.

36 MATERIALS SCIENCE↗

Effect of sintering temperature on the optical properties of BiFeO{sub 3} nanoparticles

BiFeO{sub 3} is a multiferroic material which exhibits excellent optical properties. BiFeO{sub 3} nanoparticles are synthesized by using sol-gel method. The prepared samples are sintered at 500°C, 600°C, 700°C, 800°C and 850°C. In this paper, the effect of sintering temperature on the optical properties in BiFeO{sub 3} nanoparticles is studied. Field emission electron microscopy (FESEM) images show that particles are nearly spherical in shape. It is found that the particles size increases from 37 nm to 51 nm with increasing the sintering temperature. FESEM images also reveal a homogenous size distribution of nanoparticles. All the functional groups are indexed in the Fourier transform infrared spectroscopy (FTIR) spectra. It is found that Fe-O stretching peaks are appeared in the wave number range 447 and 507 cm{sup −1}. The value of energy band gap are found 2.14, 2.26, 2.30, 2.36, and 2.54 eV for the samples sintered at 500°C, 600°C, 700°C, 800°C and 850°C respectively. Thus, the increase in band gap with increasing temperature has been observed. The present samples can be used as photo-catalyst, in non-volatile memories and to make spintronics devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lightweight nickel electrodes for nickel/hydrogen cells

Thick nickel electrodes with lightweight substrate material have been prepared and tested in Ni/H2 boilerplate cells containing 26 percent KOH electrolyte. Lightweight substrates used were either 85 or 90 percent in porosity and either 0.8 or 2 mm in thickness, respectively, compared with 80 to 82 percent porosity and 0.75 to 0.8 mm thickness of the state-of-the-art sintered plaque substrate. All of these thick electrodes had substantially improved theoretical (or chemical) capacity over that of state-of-the-art sintered nickel plaque electrodes. However, utilization of the active material was low (65 to 80 percent) compared with that of the state-of-the-art electrodes (approximately 90 percent) in 26 percent KOH. Due to this low utilization, the electrodes using 85 percent porous substrates did not show any advantage over the state-of-the-art ones. The electrodes using a 90 percent porous substrate, however, showed 17 percent higher usable specific capacity (about 0.13 Ah/g in 26 percent KOH) than that of the state-of-the-art nickel electrodes despite the low utilization. These electrodes achieved up to 4860 cycles at 40 percent depth-of-discharge with neither capacity loss nor any significant changes of rate capability and charging efficiency with cycling.

Lim, Hong S.↗

Physical and chemical analysis of a Ni/H2 cell

A cycled aerospace nickel hydrogen (Ni/H2) cell was subjected to destructive physical analysis to determine the reason for a capacity loss after 5,967 cycles at 60 percent depth of discharge. The positive plates in the cell were analyzed in terms of chemical composition, active material utilization, charge efficiency, and thickness increase. The microstructure of a cross section of the positive plate was determined by backscattered electron image analysis. The results suggest that the capacity loss in the cell is caused by low charge acceptance and low active material utilization at the positive plate. The oxidized nickel species content of the positive plate increased due to corrosion of the nickel sintered skeleton. This appears to circumvent the orderly reaction of the active material. Microstructural analysis has indicated that a new phase of active material is formed with cycling.

H Vaidyanathan↗

Controlled porosity and pore size substrates for nickel-cadmium cells

A novel process for the preparation of improved cadmium electrode plaques with precisely controlled pore size and porosity is described. The requirements for these plaques include far better uniformity, reproducibility, and life than is currently available with conventional materials. The key features of the work were preparation of plaques via a powder metallurgical technique which consisted of isostatically compacting a blend of a nickel powder with a fugitive pore-former and subsequently sintering the 'green' compact. Cadmium electrodes were prepared from these materials and were cycle tested in negative-limited cells using an accelerated, torturous test regime. Results were obtained which showed the new structures yielded electrodes that were superior to the conventional structures in mechanical properties and performance.

Gordy, D. J.↗

Extraordinary Thermal Stability and Sinter Resistance of Sub-2 nm Platinum Nanoparticles Anchored to a Carbon Support by Selenium

Nanoparticle sintering has long been a major challenge in developing catalytic systems for use at elevated temperatures. Here we report an in situ electron microscopy study of the extraordinary sinter resistance of a catalytic system comprised of sub-2 nm Pt nanoparticles on a Se-decorated carbon support. When heated to 700 °C, the average size of the Pt nanoparticles only increased from 1.6 to 2.2 nm, while the crystal structure, together with the {111} and {100} facets, of the Pt nanoparticles was well retained. Our electron microscopy analyses suggested that the superior resistance against sintering originated from the Pt–Se interaction. Confirmed by energy-dispersive X-ray elemental mapping and electron energy loss spectra, the Se atoms surrounding the Pt nanoparticles could survive the heating. This work not only offers an understanding of the physics behind the thermal behavior of this catalytic material but also sheds light on the future development of sinter-resistant catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of the processing parameters on the reactive flash sintering of ZrO 2 -CeO 2

Reactive flash sintering (RFS) is a method that was recently developed to produce dense single-phase bulk ceramic parts through solid-state reactions in a single-step that only takes a few minutes. The influence of the RFS parameters on the phase purity of a simple mixed oxide, (Zr 0.8 ,Ce 0.2 )O 2 , was investigated. Parameters such as furnace temperature, furnace atmosphere, electric current density, and alternating current (AC) or direct current (DC) were examined. It was found that (Zr 0.8 ,Ce 0.2 )O 2 pellets with high densities, above 90% of its theoretical density, can be produced by RFS in a few minutes when RFS occurs under oxidizing atmospheres, AC fields with current densities of 100 mA·mm –2 , and at a furnace temperature of 1200°C. Reducing conditions such as Ar-H 2 atmosphere and DC fields, low furnace temperatures, and low current densities resulted in phase impurities and poor reactions between the ZrO 2 and the CeO 2 powders. These results show that RFS is a useful method to produce mixed oxides, but it is very sensitive to the processing parameters. This is the first time that the influence of most of the RFS processing parameters has been studied systematically. Thus, the present work aims to provide guidelines on selecting the right processing parameters when exploring RFS.

36 MATERIALS SCIENCE↗

Structural, Magnetic, and Magnetoelastic Properties of High Nd-Content Laves Alloys Prepared by Solid-State Synthesis

The magnetostrictive alloys with composition Tb{sub 0.4}Nd{sub 0.6}(Fe{sub 0.8}Co{sub 0.2}){sub x} (1.50 ≤ × ≤ 1.90) are synthesized using the solid-state mechanical alloying (MA) method followed by sintering. The phase component, structure, thermal stability, and magnetoelastic properties are investigated as functions of composition, milling process, and annealing temperature. An amorphous phase companied by free alpha-iron is formed by MA in a high-energy ball mill, which crystallizes into MgCu{sub 2}-type and PuNi{sub 3}-type structures with different annealing temperatures. A single Laves phase for the high Nd-content Tb{sub 0.4}Nd{sub 0.6}(Fe{sub 0.8}Co{sub 0.2}){sub 1.60} is formed at optimal conditions for heat treating at 700 °C for 30 min. A large linear anisotropic magnetostriction λ{sub a} (=λ{sub ||}–λ{sub ⊥}) as high as 560 ppm at 12 kOe is obtained for the sintered alloy, which may make it a promising magnetostrictive material. Meanwhile, this work may help to open up a new way to search for Laves phase magnetostrictive materials containing Nd.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Directional solidification of aqueous TiO 2 suspensions under reduced gravity

Porous materials exhibiting aligned, elongated pore structures can be created by directional solidification of aqueous suspensions—where particles are rejected from a propagating ice front and form interdendritic, particle-packed walls—followed by sublimation of the ice, and sintering of the particle walls. Theoretical models that predict dendritic lamellae spacing—and thus wall and pore width in the final materials—are currently limited due to an inability to account for gravity-driven convective effects during solidification. In this work, aqueous suspensions of 10–30 nm TiO 2 nanoparticles are solidified on parabolic flights under micro-, lunar (~0.17 g; g l = 1.62 m/s 2 ), and Martian (~0.38 g; g m = 3.71 m/s 2 ) gravity and compared to terrestrially-solidified samples. After ice sublimation and sintering, all resulting TiO 2 materials exhibit elongated lamellar pores replicating the ice dendrites. Furthermore, increasing the TiO 2 fraction in the suspensions leads to decreased lamellar spacing in all samples, regardless of gravitational acceleration. Consistent with previous studies of microgravity solidification of binary metallic alloys, lamellar spacing decreases with increasing gravitational acceleration. Furthermore, mean lamellar spacing for 20 wt% TiO 2 nanoparticles suspensions under micro-, lunar, Martian, and terrestrial gravity are, respectively: 50 ± 8, 34 ± 11, 30 ± 6, and 23 ± 9 μm, indicating that gravity-driven convection strongly affects lamellae spacing under terrestrial gravity conditions. Gravitational effects on lamellar spacing are highest at low TiO 2 fractions in the suspension; for 5 wt% TiO 2 suspensions, the microgravity lamellar spacing is more than twice that under terrestrial gravity (182 ± 21 vs. 81 ± 23 μm). Results of this study are in good agreement with previous studies of binary metallic alloy solidification where primary dendrite spacing increases under microgravity. Additionally, literature data from ice-templating systems are used to discuss a dependence on lamellae spacing of the density ratio of particles and fluid.

36 MATERIALS SCIENCE↗

Hot Hydrogen Exposure of U x Zr 1-x C y Nuclear Fuel: The Influence of Composition and Density

Refractory carbide nuclear fuel has been one of the most promising fuel candidates for space nuclear propulsion due to its high melting point, temperature stability, and compatibility in a hot hydrogen environment. In this study, U x Zr 1-x C y fuel was produced by means of a carbothermic reduction process in different UC compositions including 5,10, 20, and 30 at.% UC in the fuel compound. The powder feedstock was consolidated via direct current sintering with densities up to 97% of the theoretical density. The samples with different U x Zr 1-x C y compositions were exposed to hot hydrogen at 2600 K for a cumulative time of 300 min. The samples were characterized by SEM, XRD, density, and measured for mass losses. The high-density samples displayed improved performance in hot hydrogen by minimizing porous sites and reducing areas of direct contact with hydrogen gas, leading to reduced mass losses. Variations in sample density proved to induce large changes in mass loss rates, increasing them up to 90%. The compositions with higher UC content reported the largest mass losses in the study. The loss of uranium occurred primarily at the surfaces exposed to the hot hydrogen where changes in the lattice constant confirmed losses exceeding 50% of the initial UC content in higher compositions, specifically to U 0.3 Zr 0.7 C y . XRD analyses revealed the presence of UH 3 in U 0.3 Zr 0.7 C y suggesting that metallic uranium formed inside the sample as a product of carbon losses. High-density U x Zr x-1 C y fuel with UC concentrations at or below 20 at.% UC exhibited stability and negligible density changes in a high temperature hydrogen environment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Graded microstructure and mechanical properties of spark plasma sintered Fe-Cr alloys

Developing graded microstructure and mechanical properties is critical for accelerating the design and optimization of structural materials for a wide range of applications. Here, in this study, Fe-Cr alloys were fabricated by spark plasma sintering (SPS) technique. The microstructure, microhardness, and tensile properties of the as-fabricated and thermally annealed variants were investigated. Graded grain structures were created in the as-fabricated cylinders along both axial and radial directions. Grain size was gradually reduced from the sample periphery to the center. Microhardness measurements reveal a gradual decrease of hardness towards the periphery of the samples. The as-fabricated Fe-Cr alloys show a desired combination of tensile strength and elongation, primarily due to the formation of a high density of oxides, voids, dislocations, and grain boundaries. After in-situ thermal annealing at 600 °C under 60 MPa for 2 h using SPS, the Fe-Cr alloys underwent minimal grain growth, and the graded grain structures were retained. The hardness was more uniformly distributed in the annealed variants, and the tensile strength was reduced with an increase in the total elongation, which is attributed to the dissolution of nano-sized oxide particles and the relief of the residual stress. This study demonstrates that SPS coupled with subsequent heat treatment can tailor the graded microstructure and control the mechanical properties of Fe-Cr alloys, showing potential applications in other alloy systems.

36 MATERIALS SCIENCE↗

Microstructure and DC electrical conductivity of spinel nickel ferrite sintered in air and nitrogen atmospheres

In recent years, the development of inert anode materials has gained considerable attention because such materials are capable of producing only environment-friendly O{sub 2} and saving energy during aluminum electrolysis. Nickel ferrite was prepared by a solid-state reaction as the inert anode in this study and its microstructures and direct current conductivities were analyzed in detail regarding the effects of different sintering atmospheres. A single-phase spinel structure was confirmed for all samples by X-ray powder diffraction. The grain sizes and the relative densities of the samples sintered in nitrogen increased by over 7 {mu}m and 10.8%, respectively, compared to those sintered in air. The direct current conductivities of the samples sintered in nitrogen showed a drastic increase compared to those sintered in air, believed to be due to the effects of increased Fe{sup 2+} ion concentration at octahedral sites and the increase of the relative density.

36 MATERIALS SCIENCE↗

3D Gel-Printing of TiC-Reinforced 316L Stainless Steel: Influence of the Printing Parameters

In this paper, the composite composed of TiC (35 wt.%) reinforced 316L stainless steel matrix was successfully prepared using a 3D gel-printing (3DGP) process. The “step effect” of 3D printing can be reduced using reasonable parameter settings. The properties of TiC/316L slurry for 3DGP and the influence of the different printing parameters on the surface quality of the samples, such as the extrusion overlaps and printing speed, were researched. The microstructure and fracture morphology of the sintered sample were revealed using scanning electron microscopy. The surface roughness, density, and mechanical properties were also measured. When the internal diameter of the nozzle was 0.50 mm, the result showed that the proper extrusion overlap parameter was 0.08 mm and the maximum printing speed was 20 mm/s. Furthermore, the minimum surface roughness value was 10 μm. After sintering, the mechanical performances were similar to those obtained using a conventional powder metallurgy process.

36 MATERIALS SCIENCE↗