Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHEAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Simulation comparison of a decoupled longitudinal control system and a velocity vector control wheel steering system during landings in wind shear

A simulator comparison of the velocity vector control wheel steering (VCWS) system and a decoupled longitudinal control system is presented. The piloting task was to use the electronic attitude direction indicator (EADI) to capture and maintain a 3 degree glide slope in the presence of wind shear and to complete the landing using the perspective runway included on the EADI. The decoupled control system used constant prefilter and feedback gains to provide steady state decoupling of flight path angle, pitch angle, and forward velocity. The decoupled control system improved the pilots' ability to control airspeed and flight path angle during the final stages of an approach made in severe wind shear. The system also improved their ability to complete safe landings. The pilots preferred the decoupled control system in severe winds and, on a pilot rating scale, rated the approach and landing task with the decoupled control system as much as 3 to 4 increments better than use of the VCWS system.

Kimball, G., Jr.↗
NASA NTRS1979

Solitary waves in stratified shear flows

An analysis is described of long, finite-amplitude internal waves in a stratified shear flow. Both regular and singular modes are considered with a nonlinear critical layer employed in the latter case. A three-layer model is used to develop the theory and closed-form expressions are obtained relating the phase speed to the Richardson number, the latter quantity being taken as O(1). The amplitude evolution equation is found to be either the Korteweg-de Vries equation or the Benjamin-Davis-Ono equation depending upon the distance of the more remote boundary from the edge of the shear layer.

Maslowe, S. A.↗
NASA NTRS1981

A reattaching free shear layer in compressible turbulent flow - A comparison of numerical and experimental results

An investigation of a two-dimensional, free turbulent shear layer reattaching on an inclined surface at Mach 2.92 and at a high Reynolds number is described. The test geometry is specifically designed to isolate the reattachment process of a high-speed separated flow. A numerical solution of the time-dependent, Reynolds-averaged, Navier-Stokes equations for the entire flow field, employing a two-equation eddy viscosity turbulence model, is presented. Detailed comparisons of prediction and experiment are made in the free shear layer, at reattachment, and in the developing boundary layer downstream. These comparisons include mean surface quantities as well as mean and fluctuating flowfield quantities. Although the overall features of this complex flow field are predicted, there are several deficiencies in the numerical solution, particularly in the region downstream of reattachment. Modifications of the turbulence model to correct these deficiencies are discussed.

Horstman, C. C.↗
NASA NTRS1981

Evidence of imbedded vortices in a three-dimensional shear flow

Vortex phenomena encountered in an investigation of the streamwise development of the three-dimensional wake region behind the tip of a three-dimensional wedge model are reported. Pressure profiles were measured by pitot probes downstream of a tip with a nearly constant surface pressure level and a nearly continuous surface curvature in a blowdown air tunnel operating at Mach 6. Rather than the simple three-dimensional quasi-parallel shear flow expected, the measurements indicated the presence of a flow with large deficits in longitudinal pitot pressure, which are usually associated with the core region of quasi-steady longitudinal vortices. Vapor screen flow visualizations also support the presence of longitudinal vortices located primarily in the tip region and evidently forming in the vicinity of the wake neck. An increase in overall wake thickness by 100% is also observed. The origin of the vortices as quasi-steady Taylor-Gortler vortices generated in the concavely curved shear layer near the wake neck is considered. It is pointed out that the existence of longitudinal vortexes suggests that three-dimensional turbulence modeling may be much more difficult than previously supposed.

Morrisette, E. L.↗
NASA NTRS1981

Separate and combined effects of static stability and shear variation on the baroclinic instability of a two-layer current

Quasi-geostrophic disturbance instability characteristics are studied in light of a linearized, two-layer Eady model in which both the static stability and the zonal current shear are uniform but different in each layer. It is shown that the qualitative character of the instability is determined by the sign of the basic-state potential vorticity gradient at the layer interface, and that there is a qualitative similarity between the effects of Richardson number variations due to changes in static stability and those due to changes in shear. The two-layer model is also used to construct an analog of the Williams (1974) continuous model of generalized Eady waves, the basic state in that case having zero potential vorticity gradient in the interior. The model results are in good agreement with the earlier Williams findings.

Hyun, J. M.↗
NASA NTRS1981

Three-dimensional structures and turbulence closure of the wake developing in a wall shear layer

The turbulent wake interacting with the rotating wall shear layer is investigated analytically and numerically. The turbulent wakes of the rotating blades in a compressor which are interacting with the rotating hub-wall boundary layer are analyzed. A modified version of the closure model of the pressure-strain correlation term in the Reynolds stress transport equation is developed to predict the effect of rotation, which is appreciable for the present flow because the thick hub-wall boundary layer is interacting with the rotor wake. It is noted that the Poisson type equation for the pressure-strain correlation has an extra rotation term when the entire flow field is rotating. This extra rotation term is modeled to accommodate the effect of rotation. In addition, the standard correction for the wall effect is incorporated for the utilized Reynolds stress closure model. The rotation-modified Reynolds stress closure model is used to predict the present flow, and the predictions are compared with the experimental data. The experimental data reveal that the characteristics of the three-dimensional turbulent wake interacting with the wall shear layer are considerably altered by the effects of the wall and the rotation. These features are predicted with good accuracy by the turbulence closure model developed.

Hah, C.↗
NASA NTRS1980

Automatic flare transition penetrating wind shears

In this paper, the development of a digital three-dimensional automatic control law designated to achieve an optimal transition of a large commercial aircraft between the glideslope conditions and the desired final touchdown condition is presented. The linearized equations representing the perturbed motion of the aircraft from the nominal glideslope trajectory are presented. A method of incorporating the spatial, low-level wind shears into these perturbed equations of motion is indicated. It is shown that the system equations then assume the familiar form of the linear regulator problem, acted upon by a constant disturbance. A design procedure is presented to compute a digital, time-invariant, optimal control law for the discrete regulator problem acted upon by a constant disturbance. The response trajectories presented demonstrate the capability of this controller to perform optimal flare maneuvers in the presence of various wind shear conditions.

Nadkarni, A. A.↗
NASA NTRS1982

Determining Shear Moduli of Orthotropic Composites

Torsion tests on specimens of same orthotropic composite material having at least two different thicknesses enable determination of effective in-plane and out-of-plane shear moduli. Moduli are calculated from experimental data with elasticity-theory equations that relate applied torque, torsional twist angle, specimen width/thickness ratio, and ratio of two shear moduli. Tests were developed to yield information on degratation of properties of composite saturated by moisture.

Sumsion, H. T.↗
NASA NTRS1982

Wrinkling of Stretched Films: Shear Stress

Report presents theoretical investigation on nonlinear shearing characteristics of wrinkling films under applied shear stress. Report helps explain force/deflection characteristic of in-planeboom and solar-array blanket structural combinations.

Zak, M. A.↗
NASA NTRS1981

Numerical simulation of a compressible homogeneous, turbulent shear flow

A direct, low Reynolds number, numerical simulation was performed on a homogeneous turbulent shear flow. The full compressible Navier-Stokes equations were used in a simulation on the ILLIAC IV computer with a 64,000 mesh. The flow fields generated by the code are used as an experimental data base, to examine the behavior of the Reynols stresses in this simple, compressible flow. The variation of the structure of the stresses and their dynamic equations as the character of the flow changed is emphasized. The structure of the tress tensor is more heavily dependent on the shear number and less on the fluctuating Mach number. The pressure-strain correlation tensor in the dynamic uations is directly calculated in this simulation. These correlations are decomposed into several parts, as contrasted with the traditional incompressible decomposition into two parts. The performance of existing models for the conventional terms is examined, and a model is proposed for the 'mean fluctuating' part.

Feiereisen, W. J.↗
NASA NTRS1981

An improved transverse shear deformation theory for laminated antisotropic plates

An improved transverse shear deformation theory for laminated anisotropic plates under bending is presented. The theory eliminates the need for an arbitrarily chosen shear correction factor. For a general laminate with coupled bending and stretching, the constitutive equations connecting resultants with average displacements and rotations are derived. Simplified forms of these relations are also obtained for the special case of a symmetric laminate with uncoupled bending. The governing equation for this special case is obtained as a sixth-order equation for the normal displacement requiring prescription of the three physically natural bounday conditions along each edge. For the limiting case of isotropy, the present theory reduces to an improved version of Mindlin's theory. Numerical results are obtained from the present theory for an example of a laminated plate under cylindrical bending. Comparison with results from exact three-dimensional analysis shows that the present theory is more accurate than other theories of equivalent order.

Murthy, M. V. V.↗
NASA NTRS1982

Vortex simulation of an inviscid shear layer

The accuracy of the vortex-blob method was tested by simulating a free-shear-layer instability, Kirchhoff's elliptical vortex, and a circular vortex. The main numerical parameters in the vortex-blob method are the density of the vortices, and the distribution of vorticity within each vortex core. The growth rate of a periodic unstable mode of the shear layer was calculated numerically and compared with the exact result. The error is only a few percent for about 10 rows of vortex blobs. The error is reduced by decreasing the spacing between vortices and, correspondingly, the core size. In the simulation of the motion of the elliptical vortex, the rotation of the boundary, without change of shape, and the circular particle paths of the vortical fluid were well simulated. For the circular vortex, optimum sets of parameters were obtained by comparing them with the exact velocity. The results are consistent with convergence theories of the vortex-blob method. In particular, second-order convergence is observed with a Gaussian core from velocity calculation.

Nakamura, Y.↗
NASA NTRS1982

The instability of sheared liquid layers

The critical values of the Reynolds number (Rc) above which unstable travelling waves exist in a steady shear flow are calculated with the inclusion of a term in the normal stress boundary condition omitted by Miles (1960). Results show a value of Rc = 34.2, compared to Miles' value of 203, for the case of a zero-surface tension interface. The critical wavenumber, critical phase speed, and Rc are calculated as functions of a nondimensional surface tension, and the mechanism of the instability is investigated by examining the disturbance energy equation. A long wave instability is found at small values of the Reynolds number when the shear flow has a parabolic velocity profile. In addition, these results are extended to larger values of the wavenumber by numerical methods, and the relation between this long wave instability and the profile curvature is examined.

Smith, M. K.↗
NASA NTRS1982

Interface cracks in adhesively bounded lap-shear joints

A study on the elastic behavior of interface cracks in adhesively bonded lap-shear joints is presented. The problem is investigated by using a recently developed method of analysis based on conservation laws in elasticity for nonhomogeneous solids and fundamental relationships in fracture mechanics of dissimilar materials. The formulation leads to a pair of linear algebraic equations in mixed-mode stress intensity factors. Singular crack-tip stress intensity solutions are determined directly by information extracted from the far field. Stress intensity factors and associated energy release rates are obtained for various cases of interest. Fundamental nature of the interfacial flaw behavior in lap-shear adhesive joints is examined in detail.

Wang, S. S.↗
NASA NTRS1984

Shear-Panel Test Fixture Eliminates Corner Stresses

New design eliminates corner stresses while maintaining uniform stress across panel. Shear panel test fixture includes eight frames and eight corner pins. Fixture assembled in two halves with shear panel sandwiched in between. Results generated from this fixture will result in good data base for design of efficient aircraft structures and other applications.

Kiss, J. J.↗
NASA NTRS1983

Postbuckling of long orthotropic plates in combined shear and compression

The nonlinear large-deflection partial differential equations of von karman for orthotropic plates loaded in combined shear and compression are converted into a set of first-order nonlinear ordinary differential equations by assuming trigonometric functions in one direction. These equations are solved numerically using a two point boundary problem solver which makes use of Newton's method. Results are obtained which determine the postbuckling behavior of rectangular plates with loading up to about three times the buckling load. Both isotropic and orthotropic composite plates are considered. Results show that orthotropic plates may behave quite differently than isotropic plates and that in-plane boundary conditions are important for plates loaded in shear.

Stein, M.↗
NASA NTRS1983

Reattaching turbulent shear layers with perturbed structure

The reattachment of a fully turbulent, two-dimensional shear layer downstream of a backward-facing step has been studied experimentally. The work examines the effect of modifications in shear layer structure upstream of reattachment. A series of experiments were conducted in a low-speed wind tunnel using specialized instrumentation suited to the highly turbulent, reversing flow near reattachment. Accurate characterization of the time-mean features of the reattaching flows was possible. Assuming linear scaling normalized on distance from reattachment, distributions of the normalized pressure coefficients, the time-averaged skin friction coefficient, and the forward flow fraction appear universal for two-dimensional reattachment, independent of initial conditions and steep height, for given duct geometry (area ratio) and for high step height Reynolds numbers. The results suggest universal flow structure in the reattachment zone.

Westphal, R. V.↗
NASA NTRS1983

Power turbine dynamics - An evaluation of a shear-mounted elastomeric damper

As an alternative to the more conventional squeeze-film bearing damper designs, a Viton-70 shear-mounted, elastomeric damper was built and tested in a T-55 power turbine high-speed balancing rig. This application demonstrated, for the first time, the feasibility of using elastomers as the primary rotor damping source in production turbine engine hardware. The shear-mounted damper design was selected because of its compatibility with actual gas turbine engine radial space constraints, its accommodation of both the radial and axial thrust loads present in gas turbine engines, and its capability of controlled axial preload. Test results showed that the Viton-70 elastomeric damper operated successfully and provided excellent control of both synchronous and nonsynchronous vibrations through all phases of testing to the maximum rotor speed of 1676 rad/s (16,000 rpm). Excellent correlation between the predicted and experienced critical speeds, mode shapes, and log decrements for the power turbine rotor and elastomer damper assembly was also achieved.

Zorzi, E. S.↗