SEARCH · Engineering Papers

Results for “Reservoir Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Experimental Investigation of Polymer Induced Fouling of Heater Tubes in the First-ever Polymer Flood Pilot on Alaska North Slope

Polymer flooding has been validated in the lab and by successful applications in other countries, such as Canada and China, to be an effective EOR technique for heavy oil reservoirs. Currently, polymer flooding is being pilot tested for the first time in the Schrader Bluff viscous oil reservoir at Milne Point field on Alaska North Slope (ANS). One of the major concerns of the operator is the impact of polymer on the oil production system after polymer breakthrough, especially the polymer induced fouling issues in the heat exchanger. This study investigates the propensity of polymer fouling on the heater tubes as a function of different variables, with the ultimate goal of determining safe and efficient operating conditions. A unique experimental set-up was indigenously designed and developed to simulate the fouling process on the heating tube. The influence of heating tube skin temperature, tube material, and polymer concentration on fouling tendency was investigated. Under each test condition, the test was run five times with the same tube, and in each run, the freshly prepared synthetic brine and polymer solution were heated from 77°F to 122°F to mimic field operating conditions. The heating time and fouling amount were recorded for each run. The morphology and composition of the deposit samples were analyzed by environmental scanning electron microscopy (ESEM) and X-ray diffraction (XRD), respectively. It has been found that, in general, the presence of polymer in produced fluids would aggravate the fouling issues on both carbon steel and stainless steel surfaces at all tested skin temperatures (165°F, 250 °F and 350°F), but only higher skin temperatures of 250°F and 350°F could cause polymer induced fouling issues on the copper tube surface and the fouling tendency increased with polymer concentration. At the lower skin temperatures of 165°F, no polymer-induced fouling was identified on the copper tube. A critical temperature that is related to the cloud point of the polymer solution was believed to exist, below which polymer induced fouling would not occur and only mineral scale deposited, but above which the polymer would obviously aggravate the fouling issue. The heating efficiency of the tube would be reduced gradually as more fouling material accumulates on its surface. The ESEM results indicate that if polymer precipitated and deposited on the surface, it would bond to the mineral crystals to form a stronger three- dimensional network structure, and that is why the polymer induced fouling was tougher and more difficult to be removed from the tube surface. The XRD analysis results confirm that the presence of polymer in the fluids can enhance the mineral scale propensity. Overall, the study results have provided practical guidance to the field operator for the ongoing polymer flooding pilot test on ANS. This study may also prove to be valuable for other chemical EOR projects around the world.

Alaska North Slope↗

DOE OSTI2020

Structure and Stability of Iron Fluoride at High Pressure–Temperature and Implication for a New Reservoir of Fluorine in the Deep Earth

Fluorine (F) is the most abundant halogen in the bulk silicate Earth. F plays an important role in geochemical and biological systems, but its abundance and distribution in the terrestrial mantle are still unclear. Recent studies suggested that F reservoirs in the deep mantle are potentially hosted in terrestrial oxide minerals, especially in aluminous bridgmanite. However, the knowledge about the formation and stability field of fluoride in the Earth’s interior is rare. In this study, we combine in situ laser-heated diamond anvil cell, synchrotron X-ray diffraction, and first-principles structure search to show that a new tetragonal structure of FeF 3 is stable at pressures of 78–130 GPa and temperatures up to ~1900 K. Simulation predicted the tetragonal phase takes a much denser structure due to the rotation of FeF 6 octahedral units. The equations of states of tetragonal FeF3 are determined by experiment and verified by simulation. Our results indicate that FeF 3 can be a potential key phase for storing F in the Earth’s lower mantle and may explain some mantle-derived magma with high F concentration.

58 GEOSCIENCES↗

NASA NTRS1991

Inferring the abundances of ClO and HO2 from Spacelab 3 atmospheric trace molecule spectroscopy observations

The vertical distributions of the important highly reactive stratospheric species, ClO and HO2, have been inferred from Spacelab 3 (May 1985) Atmospheric Trace Molecule Spectroscopy (ATMOS) measurements of more detectable radical and reservoir species. A simple steady state algebraic expression for ClO, utilizing the observed ClONO2/NO2 abundance ratio, approximates the ClO results of a time-dependent photochemical model at sunset (30 deg N). Balloon measurements of ClO and comparisons of time-dependent photochemical model calculations of ClONO2 and HCl with the corresponding ATMOS profiles suggest that the actual ClO values are less than the time-dependent model profiles for ClO at sunset and sunrise (47 deg S). Errors in the current model simulation of the partitioning among the principal free chlorine species (HCl, ClONO2, and ClO) are indicated. The accuracy of the time-dependent model calculations of HO2 is suggested by the agreement between model results and ATMOS observations for HO2NO2 and balloon measurements of HO2. This confirms for the first time the procedure suggested previously by a number of authors of deriving HO(x) abundances from observed fields of O3 and H2O.

Allen, Mark↗

DOE OSTI2021

Geomechanical and flow implications with continued bioconversion of coal to methane: Experiments and modeling

Microbial conversion of coal to methane is a promising technology during transition of coal-based energy from conventional coal mining to natural gas recovery from coal. Significant research advances have been made towards engineering ideal microbial communities and nutrients for bio-stimulation of coal. However, actual field applications require geomechanical and flow behavior characterization of coal during the bioconversion process as well as gas production over the life of the created “biogenic gas reservoirs”. This work presents the results of an experimental investigation to estimate gas/methane production using bioconversion of coal and analyses of variations in bulk modulus, strain and permeability. Bulk modulus of coal demonstrated time-dependent behavior with continued bioconversion of solid coal. The phenomenon was modeled using mass balancing in a closed environment and the logistic equation based biogenic gas production with time. The modeled gas production and changes in modulus of coal showed excellent agreement with the corresponding experimental results. Next, numerical simulation of biogenic conversion of coal in a constant stress in-situ condition, replicating the Huff ‘n Puff method under field conditions, was carried out. The results showed that bioconversion can lead to decrease in effective stress, increase in permeability and decrease in the modulus of coal with time. Repeated recharge of coal with nutrients and recovering the produced gas, that is, sequential cycles of Huff n’ Puff, showed further increase in permeability and decrease in coal strength, potentially leading to coal failure in-situ, further increasing the permeability, thus enhancing the prospect of field application of the technology.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2025

Unraveling Hydrogen Induced Geochemical Reaction Mechanisms through Coupled Geochemical Modeling and Machine Learning

Underground hydrogen storage (UHS) provides a promising large-scale, long-term energy storage solution. A reasonable recovery of stored hydrogen is critical for a successful storage scheme. However, in subsurface reservoirs hydrogen is subject to active geochemical reactions that might result in hydrogen loss. In this study, we implemented a geochemical modeling approach coupled with an unsupervised machine learning technique called non-negative matrix factorization (NMF) to unravel the complex brine-rock-H 2 geochemical processes responsible for hydrogen losses, with particular focus on sulfate reduction reactions. NMF is applied to modeled mineral evolution and fluid component profiles to retrieve profiles that can be interpreted to more easily assess competing processes. NMF decouples simulated competing equilibrium reactions. This facilitates separation of overlapping reaction profiles from redox processes, dissolution fronts, and secondary precipitation while considering the effects of simulation parameters such as salinity, temperature, and total H 2 pressure. NMF successfully discriminates these competing effects in nonlinear ways, allowing robust interpretation. In addition, NMF reveals subtle coupled mineral associations and reaction fronts that are invisible to conventional model analysis. This integrated approach strengthens the conceptual understanding of complex nonlinear hydrogen-brine-rock interactions and advances geochemical research on UHS systems to resolve complexities in modeled geochemical systems without the need for direct experiments or prior knowledge. Furthermore, this study highlights the efficacy of combining geochemical modeling with machine learning techniques to enhance the interpretability of the intricate geochemical simulation output through deciphering the overlapping reaction path that cannot be achieved only using conventional analysis of geochemical models alone.

08 HYDROGEN↗

DOE OSTI2022

Evaluating power grid model hydropower feasibility with a river operations model

Production cost models (PCMs) simulate dispatch of generators across a large power grid and are used widely by planners to study the reliability of electricity supply. As energy systems transition away from the thermoelectric technologies that have traditionally balanced electricity supply and demand, hydropower and its representation in PCMs is of increasing importance. A limitation of PCMs applied to continental power grids with diverse generation portfolios is that hydropower generation is simulated without full consideration of complex river dynamics, leading to possible misrepresentation of grid flexibility and performance. In addition, data used in PCMs may reflect outdated operating policies. In this paper we propose a hydropower generation feasibility test for PCMs. The approach uses a detailed hydropower model to determine whether the hourly hydropower schedule from a PCM with simplified monthly parameterization can be attained after accounting for realistic river dynamics and operating policies, such as spill requirements and general water movement and balance through a cascade reservoir system. We perform this hydropower generation test for the ‘Big 10’ hydropower system on the Columbia River (part of the Western Interconnect of the United States), revealing 9% overestimation of available hydropower generation in a PCM solution in an average hydrologic year. Our evaluation provides insight on the cost and opportunities for better representing hydropower in PCMs.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2016

FTIR Analysis of Water in Pyroxene and Plagioclase in ALH 84001 and Nakhlites

Determining the volatile budget of the interior of Mars is crucial for our understanding of that planet's formation, geodynamics, cooling history and the origin of its volcanism and atmosphere as well as its potential for life. Surficial water is evident from spacecraft and rover data in polar caps and the atmosphere, in the presence of river channels, and in the detection of water-bearing minerals. Meteorites, however, are our best candidates for estimating the amount of water present at depth, even if all are crustal samples. The last 10 years have seen a blooming of studies measuring water and halogens in Martian meteorites. The bulk of these studies target phosphate, a typically late-stage phase in the igneous Martian meteorites that potentially would concentrate incompatible element hydrogen (H quantified traditionally as "water", i.e., H2O concentrations in weight) near the end of the crystallization sequence. However, determining the amount of water, F, and Cl in the magma from which a phosphate crystallized from is not straightforward and in most instances not possible. On the other hand, phosphates have turned out to be very useful in identifying hydrothermal processes that could have added water while or after the magma flowed and crystallized. Another caveat of analyzing Martian meteorite phases for water is that shocked phases such as maskelynite and impact melts appear to have incorporated water from the Martian atmosphere, as evidenced by high H isotope ((delta)D) signatures, and therefore their water concentrations cannot be interpreted in terms of deep planetary processes. The best candidates for estimating the water content of the Martian interior have been melt inclusions (glass or amphibole-bearing) which the enclosing mineral (usually olivine) would have prevented from exchanging volatiles with the surroundings after crystallization. Even some of these, however, have high (delta)D, meaning they were affected by H exchange via impact events or with crustal reservoirs or hydrothermal fluids. Here, nominally anhydrous minerals (pyroxene, olivine, plagioclase, or maskelynite) in orthopyroxenite ALH 84001 and selected nakhlites are analyzed for water and major elements, in order to determine 1) whether they contain any water; 2) if they do, what controls its distribution (crystallization, degassing, hydrothermal or impact processes); and 3) if any of these measurements can be used to infer the water contents of the parent magma and their mantle sources. A shock-reverberation experiment was also performed on terrestrial orthopyroxenes (opx) to simulate the heavily shocked conditions of ALH 84001 (> 31 GPa [17]).

Peslier, A. H.↗

NASA NTRS2002

Laboratory Studies of Extraterrestrial Ices and PAHs: Making an Astrobiological Silk Purse Out of An Interstellar Sow's Ear

Tremendous strides have been made in our understanding of interstellar material over the past twenty years thanks to significant, parallel developments in observational astronomy and laboratory astrophysics. Today, the composition of dust in the ISM is reasonably well constrained to cold, micron-sized particles of various refractory materials. Shrouded within the protective confines of cold, opaque molecular clouds--the birthplace of stars and planets--these particles secrete mantles of mixed molecular lees whose major components are also well constrained. Finally, amidst the molecular inventory of these ice mantles are likely to be found polycyclic aromatic hydrocarbons (PAHs), whose telltale infrared signature I is now recognized throughout the Universe. However, of what significance is this scenario to the origin of life in our solar system--or any other? The major components of the icy materials observed in interstellar clouds and in our own solar system are uniformly quite simple. In addition, despite the fact that PAHs likely represent the single largest molecular reservoir of organic carbon in evolving planetary systems, they are not what would be considered "biogenic" molecules. Although interesting from a chemical and astrophysical standpoint, in the absence of a mechanism by which these materials can be transformed into more biochemically significant structures, they are of little Astrobiological significance. In this talk, we will begin with a brief review of the nature and abundance of the "raw" population of PAHs and PAH-related materials in the ISM. From there, we will move on to explore our laboratory simulations of the photochemical evolution of realistic mixed molecular ices under conditions which simulate those encountered in the ISM and in evolving planetary systems. Particular attention will be paid to the surprisingly complex array of organic species that are produced in these ices from such a deceptively simple inventory of starting materials. In addition, we will explore the chemistry of PAHs under these conditions and consider its potential for transforming that rich repository of pre-biotic organic "ore" into materials of greater importance to Astrobiology.

Hudgins, Douglas M.↗

DOE OSTI2025

Continuous operation of a coherent 3,000-qubit system

Neutral atoms are a promising platform for quantum science, enabling advances in areas ranging from quantum simulations and computation to metrology, atomic clocks and quantum networking. Although atom losses typically limit these systems to a pulsed mode, continuous operation could substantially enhance cycle rates, remove bottlenecks in metrology and enable deep-circuit quantum evolution through quantum error correction. Here we demonstrate an experimental architecture for high-rate reloading and continuous operation of a large-scale atom-array system while realizing coherent storage and manipulation of quantum information. Our approach utilizes a series of two optical lattice conveyor belts to transport atom reservoirs into the science region, where atoms are repeatedly extracted into optical tweezers without affecting the coherence of qubits stored nearby. Using a reloading rate of 300,000 atoms in tweezers per second, we create over 30,000 initialized qubits per second, which we leverage to assemble and maintain an array of over 3,000 atoms for more than 2 hours. Furthermore, we demonstrate persistent refilling of the array with atomic qubits in either a spin-polarized or a coherent superposition state while preserving the quantum state of stored qubits. Our results pave the way for the realization of large-scale continuously operated atomic clocks, sensors and fault-tolerant quantum computers.

atomic and molecular physics↗

NASA NTRS2014

Investigating the Sensitivity of Surface-Level Nitrate Seasonality in Antarctica to Primary Sources Using a Global Model

Determining the sources of total nitrate (TNIT NO-3 + HNO3) reaching Antarctica is a long-standing challenge. Here we analyze the monthly sensitivity of surface-level TNIT in Antarctica to primary sources using a global 3-D chemical transport model, GEOS-Chem, and its adjoint. Modeled seasonal variation of TNIT concentrations shows good agreement with several measurement studies, given that the lack of post-depositional processing in the model leads to an expected underestimate of maximum values in November through January. Remote NOx sources have the greatest impact May-July, during when the model background concentrations are sensitive to NOx emissions from fossil fuel combustion, soil, and lightning originating from 25S to 65S. In this season, NOx is transported to Antarctica as TNIT, which is formed above continental source regions at an altitude of 5-11 km. In other seasons, more NOx is transported as a reservoir species (e.g., peroxyacetyl nitrate, PAN) through the free troposphere, transforming into TNIT within a cone of influence that extends to 35S and above 4 km altitude. Photolysis of PAN over Antarctica is the main driver of modeled NOx seasonality. Stratospheric production and loss of tracers are relatively unimportant in monthly sensitivities in GEOS-Chem, driving only a few percent of surface level variability of TNIT. A small peak concentration in August is captured by the model, although some measured values in August fall outside the range of simulated concentrations. Modifications to the model to represent sedimentation of polar stratospheric clouds (PSCs) lead to increased surface level August TNIT concentrations. However, this simple representation does not explicitly account for PSC particle deposition or disappearance of the tropopause in the middle of winter, and thus the influence of stratospheric nitrate sources estimated in this study is likely a lower bound.

stratosphere↗

DOE OSTI2025

COMPUTATION FLUID DYNAMICS ANALYSIS FOR GENERIC SMALL MODULAR REACTOR CONTAINMENT SEPARATE EFFECTS TEST

It is desirable for fourth-generation Small Modular Reactors to be passively cooled in standard and accident operations. Passive Containment Cooling Systems can reject heat from the containment structure, without using pumps or blowers. The targeted design containment structure is a large, domed, stainless steel, cylindrical vessel. In a postulated Design Basis Accident, steam will flash inside containment. Steam condensation occurs on the inner containment wall and transfers heat through the steel containment into a large body of water known as the annular reservoir (AR) surrounding the vessel serving as the ultimate heat sink. Natural circulation drives the flow in the AR and heat will be released to the environment by evaporation of water. Unique containment geometry requires a separate effects test (SET) facility for the verification and validation of the computer code and evaluation model development and assessment for reactor licensing efforts. In this study, STAR-CCM+, a computational fluid dynamics (CFD) code was used to inform the decision-making process on the design of the SET. The CFD simulation modeled, a two-phase turbulent flow with fluid film development and heat transfer for different containment geometries. The Reactor Excursion and Leak Analysis Program will also be used in a code-to-code verification against the CFD results.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

NASA NTRS2012

Tropospheric Bromine Chemistry: Implications for Present and Pre-industrial Ozone and Mercury

We present a new model for the global tropospheric chemistry of inorganic bromine (Bry) coupled to oxidant-aerosol chemistry in the GEOS-Chem chemical transport model (CTM). Sources of tropospheric Bry include debromination of sea-salt aerosol, photolysis and oxidation of short-lived bromocarbons, and transport from the stratosphere. Comparison to a GOME-2 satellite climatology of tropospheric BrO columns shows that the model can reproduce the observed increase of BrO with latitude, the northern mid-latitudes maximum in winter, and the Arctic maximum in spring. This successful simulation is contingent on the HOBr + HBr reaction taking place in aqueous aerosols and ice clouds. Bromine chemistry in the model decreases tropospheric ozone mixing ratios by <1-8 nmol/mol (6.5% globally), with the largest effects in the northern extratropics in spring. The global mean tropospheric OH concentration decreases by 4 %. Inclusion of bromine chemistry improves the ability of global models (GEOS-Chem and p-TOMCAT) to simulate observed 19th-century ozone and its seasonality. Bromine effects on tropospheric ozone are comparable in the present-day and pre-industrial atmospheres so that estimates of anthropogenic radiative forcing are minimally affected. Br atom concentrations are 40% higher in the pre-industrial atmosphere due to lower ozone, which would decrease by a factor of 2 the atmospheric lifetime of elemental mercury against oxidation by Br. This suggests that historical anthropogenic mercury emissions may have mostly deposited to northern mid-latitudes, enriching the corresponding surface reservoirs. The persistent rise in background surface ozone at northern mid-latitudes during the past decades could possibly contribute to the observations of elevated mercury in subsurface waters of the North Atlantic.

bromine↗

DOE OSTI2019

Mathematical Reconstruction of Land Carbon Models From Their Numerical Output: Computing Soil Radiocarbon From C Dynamics

Radiocarbon ( 14 C) is a powerful tracer of the global carbon cycle that is commonly used to assess carbon cycling rates in various Earth system reservoirs and as a benchmark to assess model performance. Therefore, it has been recommended that Earth System Models (ESMs) participating in the Coupled Model Intercomparison Project Phase 6 report predicted radiocarbon values for relevant carbon pools. However, a detailed representation of radiocarbon dynamics may be an impractical burden on model developers. Here, we present an alternative approach to compute radiocarbon values from the numerical output of an ESM that does not explicitly represent these dynamics. The approach requires computed 12 C stocks and fluxes among all carbon pools for a particular simulation of the model. From this output, a time-dependent linear compartmental system is computed with its respective state-transition matrix. Using transient atmospheric 14 C values as inputs, the state-transition matrix is then applied to compute radiocarbon values for each pool, the average value for the entire system, and component fluxes. We demonstrate the approach with ELMv1-ECA, the land component of an ESM model that explicitly represents 12 C, and 14 C in 7 soil pools and 10 vertical layers. Results from our proposed method are highly accurate (relative error <0.01%) compared with the ELMv1-ECA 12 C and 14 C predictions, demonstrating the potential to use this approach in CMIP6 and other model simulations that do not explicitly represent 14 C.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2019

Water Storage Trends in High Mountain Asia

Changes in terrestrial water storage (TWS) in High Mountain Asia (HMA) could have major societal impacts, as the region’s large reservoirs of glaciers, snow, and groundwater provide a freshwater source to more than one billion people. We seek to quantify and close the budget of secular changes in TWS over the span of the GRACE satellite mission (2003–2016). To assess the TWS trend budget we consider a new high-resolution mass trend product determined directly from GRACE L1B data, glacier mass balance derived from Digital Elevation Models (DEMs), groundwater variability determined from confined and unconfined well observations, and terrestrial water budget estimates from a suite of land surface model simulations with the NASA Land Information System (LIS). This effort is successful at closing the aggregated TWS trend budget over the entire HMA region, the glaciated portion of HMA, and the Indus and Ganges basins, where the full-region trends are primarily due to the glacier mass balance and groundwater signals. Additionally, we investigate the closure of TWS trends at individual 1-arc-degree mascons (area ≈12,000 km2); a significant improvement in spatial resolution over previous analyses of GRACE-derived trends. This mascon-level analysis reveals locations where the TWS trends are well-explained by the independent datasets, as well as regions where they are not; identifying specific geographic areas where additional data and model improvements are needed. The accurate characterization of total TWS trends and its components presented here is critical to understanding the complex dynamics of the region, and is a necessary step toward projecting future water mass changes in HMA.

Bryant D Loomis↗

DOE OSTI2025

Wellbore Stability and Mud Loss Management in Geothermal Drilling: Optimizing Mud Weight to Mitigate Tensile Wellbore Fracturing at The Geysers, California

As part of a U.S. Department of Energy (DOE) Geothermal Technologies Office-funded initiative, Geysers Power Company, LLC, a subsidiary of Calpine Corporation, has been working to enhance drilling performance at the world’s largest geothermal field, The Geysers, in northern California. In a recent drilling operation of the GDC-36 well, excessive mud losses were encountered, initially addressed through repeated but largely ineffective cement plugging. Ultimately, the most effective strategy was to drill blind through the loss zones, made feasible by the high rate of penetration (ROP) achieved with PDC bits, allowing significant progress before the mud tanks were depleted and water-sensitive argillic formation layers could collapse. In response to these challenges, the project team explored alternative methods to minimize downtime and risks associated with cement plugging and continuous mud loss and to contemplate the driving mechanisms for the losses. Wellbore imaging using Formation MicroImager (FMI) and Ultrasonic Borehole Imager (UBI) tools revealed longitudinal tensile fractures, which were attributed to mud weights exceeding the minimum circumferential stress resulting from the native stress field and formation pressure. This study examines the mud losses encountered and leverages wellbore imaging data to understand the mechanisms behind mud induced tensile fracturing in specific rock facies. Understanding fracture behavior across different lithologies is crucial, as fractures within the reservoir can enhance steam migration throughout the system. The reservoir at The Geysers lies within the Mesozoic Franciscan Assemblage, a tectonic mélange formed by subduction. It consists of metamorphosed turbidite sandstone (greywacke) and mudstone (argillite), oceanic upper crust (including greenstone and chert), and serpentinized ultramafic rocks - each exhibiting distinct geomechanical fracturing properties. The structural fabric of the Franciscan Assemblage was shaped by low-angle Mesozoic thrust faulting and later overprinted by sub-vertical strike-slip structures related to the Pacific-North American plate boundary. A wellbore stability model was developed using core measurements and logs to simulate fracturing scenarios during drilling under varying stress conditions. These simulations guided the development of an optimized mud weight management strategy that should enable adaptive adjustments during drilling, reducing the likelihood of tensile fracturing and mud losses, ultimately improving operational efficiency.

15 GEOTHERMAL ENERGY↗

DOE OSTI2020

Using Concentrating Solar Power to Create a Geological Thermal Energy Reservoir for Seasonal Storage and Flexible Power Plant Operation

Abstract We propose a hybrid renewable energy system—a geothermal energy storage system (GeoTES) with solar—to provide low-cost dispatchable power at various timescales from daily, to weekly, to seasonally. GeoTES with solar uses a concentrating solar power collector field to produce hot water that is injected into a sedimentary basin to create a synthetic geothermal resource. The stored geothermal heat can then be dispatched when required by the electrical grid. GeoTES is particularly valuable for a grid with a high penetration of non-flexible renewable technologies such as photovoltaic and wind power. In this work, a sophisticated hybrid model is developed to assess the technical and economic potential of GeoTES by combining IPSEpro, which is a power-cycle simulation tool, and SAM, an economic analysis tool by National Renewable Energy Laboratory (NREL). The analysis shows with proper initial charging period that the heat loss in storage is almost negligible and is a suitable technology for long-term energy storage. Various power-cycle options are evaluated, and the most suitable power cycle is selected for further study. Annual calculations of the GeoTES system indicate that a levelized cost of storage (LCOS) of 12.4 ¢/kWh e can be achieved for seasonal storage of 4000 h; this value is much lower than the existing long-term storage. The LCOS of GeoTES is insensitive to the storage duration above 8 h, unlike battery and molten-salt thermal storage systems. This result demonstrates that GeoTES can be a competitive seasonal storage technology in the future electricity market. The levelized cost of electricity of the GeoTES system is also carefully analyzed and can vary between 10.0 and 16.4 ¢/kWh e , depending on solar-collector prices.

25 ENERGY STORAGE↗

DOE OSTI2021

Viral Fate and Transport for COVID-19 - NVBL

The NVBL Viral Fate and Transport Team includes researchers from eleven DOE national laboratories and is utilizing unique experimental facilities combined with physics-based and data-driven modeling and simulation to study the transmission, transport, and fate of SARSCoV-2. The team was focused on understanding and ultimately predicting SARS-CoV-2 viability in varied environments with the goal of rapidly informing strategies that guide the nation’s resumption of normal activities. The primary goals of this project include prioritizing administrative and engineering controls that reduce the risk of SARS-CoV-2 transmission within an enclosed environment; identifying the chemical and physical properties that influence binding of SARS-CoV-2 to common surfaces; and understanding the contribution of environmental reservoirs and conditions on transmission and resurgence of SARS-CoV-2.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Viral Fate and Transport for COVID-19

54 ENVIRONMENTAL SCIENCES↗