Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RUPTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Multiobjective Constrained Symbolic Regression for Predictive Modeling of Material Creep Behavior

When creep testing is repeated on samples of the same alloy under the same parametric conditions (i.e., stress and temperature), the resulting strain/time curves can vary from each other considerably as shown in Figure 1 [1]. The time required to creep test a material to rupture can extend to the order of years. Because of this, a numerical model that can quickly analyze the incomplete results of an ongoing experiment to predict 1) the incomplete portion of the strain/time curve leading up to the rupture point and 2) the rupture point itself would be of great utility to the materials community. Such a model has the potential to save 1) the time required to finish running the experiment to rupture 2) the associated monetary cost of finishing said experiment. Furthermore, it would be advantageous if the predictive model could give a parametric function modeling strain/time curves for material scientists to investigate the impact of the temperature and stress parameters on the resulting creep behavior. This work introduces a piecewise symbolic regression algorithm to predict the remainder of the strain/time curve. Preliminary results show good model performance.

36 MATERIALS SCIENCE↗

High-burnup Experiments in Reactivity Initiated Accidents (HERA)

HERA is a joint experimental program (JEEP) operating within the Nuclear Energy Agency’s (NEA’s) framework for irradiation experiments (FIDES). HERA is dedicated to the understanding of light water reactor (LWR) fuel performance at high burnup under reactivity-initiated accidents (RIA). During RIAs the fuel cladding can be breached by one of two mechanisms; pellet-cladding mechanical interaction or high temperature balloon and rupture. Pellet-cladding mechanical interaction (PCMI) failure occurs in the early phase of an RIA transient where the fuel pellet expands rapidly into the cladding prior to any meaningful heat transfer from the pellet to the cladding. This results in high stresses in the cladding resulting in crack propagation through the base Zircaloy metal and axially along the cladding tube. Failure by PCMI is a brittle failure mode and occurs at low cladding strains, approximately 2% hoop strain. If the cladding survives the PCMI phase of the transient, it may still fail due to ballooning and rupture induced by extended exposure to high temperature. Thermal transport from the fuel pin to the coolant is significantly reduced if a transition to film boiling on the cladding surface occurs. This result in both a rapid increase in fuel temperature, which drives fission gas release, and a spike in cladding temperature, which results in loss of mechanical strength. If the internal pressure of the fuel rod is greater than the system pressure the cladding can inelastically deform and eventually rupture. Failure by swelling and rupture occurs at larger strains, generally greater than 5% hoop strain. While PCMI failures are generally seen as more limiting, the dominance of one failure mode over the other can be affected by both the cladding material conditions, and the transient evolution.

(HERA)↗

A Stochastic Intracellular Model of Anthrax Infection With Spore Germination Heterogeneity

We present a stochastic mathematical model of the intracellular infection dynamics of Bacillus anthracis in macrophages. Following inhalation of B. anthracis spores, these are ingested by alveolar phagocytes. Ingested spores then begin to germinate and divide intracellularly. This can lead to the eventual death of the host cell and the extracellular release of bacterial progeny. Some macrophages successfully eliminate the intracellular bacteria and will recover. Here, a stochastic birth-and-death process with catastrophe is proposed, which includes the mechanism of spore germination and maturation of B. anthracis . The resulting model is used to explore the potential for heterogeneity in the spore germination rate, with the consideration of two extreme cases for the rate distribution: continuous Gaussian and discrete Bernoulli. We make use of approximate Bayesian computation to calibrate our model using experimental measurements from in vitro infection of murine peritoneal macrophages with spores of the Sterne 34F2 strain of B. anthracis . The calibrated stochastic model allows us to compute the probability of rupture, mean time to rupture, and rupture size distribution, of a macrophage that has been infected with one spore. We also obtain the mean spore and bacterial loads over time for a population of cells, each assumed to be initially infected with a single spore. Our results support the existence of significant heterogeneity in the germination rate, with a subset of spores expected to germinate much later than the majority. Furthermore, in agreement with experimental evidence, our results suggest that most of the spores taken up by macrophages are likely to be eliminated by the host cell, but a few germinated spores may survive phagocytosis and lead to the death of the infected cell. Finally, we discuss how this stochastic modelling approach, together with dose-response data, allows us to quantify and predict individual infection risk following exposure.

59 BASIC BIOLOGICAL SCIENCES↗

A phase-field model for quasi-dynamic nucleation, growth, and propagation of rate-and-state faults

Despite its critical role in the study of earthquake processes, numerical simulation of the entire stages of fault rupture remains a formidable task. The main challenges in simulating a fault rupture process include the complex evolution of fault geometry, frictional contact, and off-fault damage over a wide range of spatial and temporal scales. Here, in this paper, we develop a phase-field model for quasi-dynamic fault nucleation, growth, and propagation, which features two standout advantages: (i) it does not require any sophisticated algorithms to represent fault geometry and its evolution; and (ii) it allows for modeling fault nucleation, propagation, and off-fault damage processes with a single formulation. Built on a recently developed phase-field framework for shear fractures with frictional contact, the proposed formulation incorporates rate- and state-dependent friction, radiation damping, and their impacts on fault mechanics and off-fault damage. We show that the numerical results of the phase-field model are consistent with those obtained from well-verified approaches that model the fault as a surface of discontinuity, without suffering from the mesh convergence issue in the existing continuous approaches to fault rupture (e.g., the stress glut method). Further, through numerical examples of fault propagation in various settings, we demonstrate that the phase-field approach may open new opportunities for investigating complex earthquake processes that have remained overly challenging for the existing numerical methods.

58 GEOSCIENCES↗

Ten Years of Experience with the GORE EXCLUDER{sup Registered-Sign} Stent-Graft for the Treatment of Aortic and Iliac Aneurysms: Outcomes from a Single Center Study

Purpose: This study was designed to assess the long-term outcome of selected patients with aortic, aortoiliac, and isolated common iliac aneurysms treated with the GORE EXCLUDER{sup Registered-Sign} stent-graft. Methods: Between December 1998 and June 2010, 121 nonconsecutive patients underwent insertion of a GORE EXCLUDER{sup Registered-Sign} stent-graft to treat an aortic (n = 80; 66%), aortoiliac (n = 25; 21%), or isolated common iliac (n = 16; 13%) aneurysm. Procedural and follow-up data were collected prospectively. Primary endpoints are overall survival, intervention-free survival, and freedom from aneurysm rupture. Secondary endpoints are device- and procedure-related complications, including all types of endoleaks or endotension, and reintervention. Results: The mean follow-up is 4.98 years (standard deviation, 3.18; median follow-up, 4.05 years). The estimated percentage overall survival (with 95% confidence interval) after respectively 5 and 10 years of follow-up is 74.5% (65.8; 81.3) and 57.8% (47.7; 66.7). The estimated intervention-free survival after respectively 5 and 10 years is 90% (84.3; 96.1) and 77.7% (67; 88.4). There was no aneurysm rupture during follow-up. Early postoperative complications occurred in 16 patients (13%); none were fatal. Late reinterventions were performed in 18 patients (15%). Finally, throughout the follow-up period, endoleaks were identified: type I (n = 4; 3%); type II (n = 39; 32%); type III (n = 0; 0%); endotension was seen in 11 patients (9%). Conclusions: Aneurysm exclusion with use of the GORE EXCLUDER{sup Registered-Sign} stent-graft is durable through a mean follow-up of nearly 5 years. There was no postprocedural aneurysm rupture. Complications occurred throughout the follow-up period, requiring continued clinical and radiological surveillance.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Fracture Analysis of ARB-Processed CP-Ti Sheets Under Unidirectional Tensile Loading

The fracture behavior of commercially pure titanium (CP-Ti) processed by accumulative roll bonding (ARB) was investigated in this study. Monolithic and Ti-SiC composite samples were first produced by ARB process and then subjected to uniaxial tensile testing at room temperature. Two different ductile fracture mechanisms including shear dimple rupture and equiaxed dimple rupture were observed in the initial and final ARB cycles, respectively. The difference in the rupture mechanism was attributed to different stress states at the crack tip and different densities of metallurgical defects. A non-uniform distribution of dimple size was obtained for fracture surfaces of the samples processed by a low number of ARB cycles. This was attributed to the heterogeneity of microstructure in the primary ARB cycles. The fracture surface of the samples processed by high ARB cycles represented more uniform dimples. This was attributed to more homogenous microstructure in the final cycles. Moreover, SiC particles showed a major role in fracture of samples, so that they affected the size and depth of the dimples, as well as the number of ARB cycles in which the transmission of the fracture mechanism occurred.

36 MATERIALS SCIENCE↗

Deformation and Fracture Behaviors of Cylindrical Battery Shell During Thermal Runaway

Thermal runaway is one of the catastrophic failure modes of lithium-ion cells. During thermal runaway in cylindrical cells, sidewall shell rupture has been identified as a contributing factor for thermal runaway propagation in battery packs. Herein, the deformation and fracture behaviors of the battery shell during thermal runaway are investigated based on in-situ and ex-situ characterization as well as physics-based modeling. The deformation and fracture modes of the battery shell with/without Carbon Fiber Reinforced Polymer (CFRP) sleeves are identified. In the simulation, the strain introduced by thermal expansion of the system is considered, as well as the thermal and strain rate effects on the plastic stage. The final cell shell modeling is validated by cell thermal runaway tests. Results reveal the quantitative relation between shell deformation behaviors and the pressure and temperature distribution. Both the experiment and model demonstrate the effectiveness of adding a tight-fitting CFRP sleeve around the cell in limiting the side-wall rupture of the shell. The use of CFRP tubes introduces a novel phenomenon in the context of uneven temperature distribution. Results shed light on the mechanistic analysis of a cell side-wall rupture during thermal runaway and provide essential guidance for the next-generation safe battery design.

battery casing↗

Study on the creep deformation behavior and characterization of 9Cr-1Mo-V-Nb steel at elevated temperatures

Highlights: • The true creep deformation mechanism has been found by an evaluation of threshold stresses. • The analysed creep data suggest that the rate-controlling mechanism of creep is dislocation climb. • Coarsening of the M{sub 23}C{sub 6} carbides has been observed at 650 °C and 700 °C during creep. In this study, creep tests were conducted on a set of specimens made from the same tube of T91 steel at different temperatures (600 °C, 650 °C and 700 °C) with the applied stresses ranging from 30 MPa to 180 MPa and rupture times from 28.7 to 7957 h for understanding the creep mechanism. The stress dependence of minimum creep rates exhibits a power law with different exponents were found to be 14.3, 11 and 4.6 at 600 °C, 650 °C and 700 °C, respectively. Activation energy of creep was determined to be ~573 kJ/mol, which is ~53% higher than that of the lattice self-diffusion in α-iron. Based on the stress exponents, the modified Bird-Murkherjee-Dorn (BMD) equation was used to find the threshold stresses which has shown the strongly dependent on the test temperature. After incorporating the threshold stress, true activation energy of creep was found to be decreased ~271 kJ/mol, which is equivalent to that of lattice-self diffusion in α-iron. This subsequently led to evaluation of true stress exponent ~4. The results of creep data suggest that the rate-controlling mechanism of creep is dislocation climb for T91 steel. Microstructural observation of T91 steel is mainly consisting of lath martensite structure with fine MX carbonitrides and M{sub 23}C{sub 6} carbides were characterized using the scanning and transmission electron microscopes. The stress dependence of creep rupture life has shown that the operating mechanism of creep is similar. Furthermore, creep data was analysed for validity of the Monkman-Grant relationship and creep damage tolerance parameter. The qualitative microstructure of the crept samples show that less number of MX carbonitrides within grains is responsible for creep cavity formation and decreasing the rupture life. Thus, microstructural degradation is attributed to M{sub 23}C{sub 6} carbides coarsened and dislocation sub-structure boundaries are mainly responsible for creep damage. The fracture morphology of the samples has revealed with dimples is a typical transgranular ductile failure.

36 MATERIALS SCIENCE↗

Earthquake Risk Management of Underground Lifelines in the Urban Area of Catania

Lifelines typically include the following five utility networks: potable water, sewage natural gas, electric power, telecommunication and transportation system. The response of lifeline systems, like gas and water networks, during a strong earthquake, can be conveniently evaluated with the estimated average number of ruptures per km of pipe. These ruptures may be caused either by fault ruptures crossing, or by permanent deformations of the soil mass (landslides, liquefaction), or by transient soil deformations caused by seismic wave propagation. The possible consequences of damaging earthquakes on transportation systems may be the reduction or the interruption of traffic flow, as well as the impact on the emergency response and on the recovery assistance. A critical element in the emergency management is the closure of roads due to fallen obstacles and debris of collapsed buildings.The earthquake-induced damage to buried pipes is expressed in terms of repair rate (RR), defined as the number of repairs divided by the pipe length (km) exposed to a particular level of seismic demand; this number is a function of the pipe material (and joint type), of the pipe diameter and of the ground shaking level, measured in terms of peak horizontal ground velocity (PGV) or permanent ground displacement (PGD). The development of damage algorithms for buried pipelines is primarily based on empirical evidence, tempered with engineering judgment and sometimes by analytical formulations.For the city of Catania, in the present work use has been made of the correlation between RR and peak horizontal ground velocity by American Lifelines Alliance (ALA, 2001), for the verifications of main buried pipelines. The performance of the main buried distribution networks has been evaluated for the Level I earthquake scenario (January 11, 1693 event I = XI, M 7.3) and for the Level II earthquake scenario (February 20, 1818 event I = IX, M 6.2).Seismic damage scenario of main gas pipelines and water has been obtained, with PGV values calculated for level I and level II earthquake scenarios.

58 GEOSCIENCES↗

Numerical simulations of rubber networks at moderate to high tensile strains using a purely enthalpic force extension curve for individual chains

We report the results of numerical simulations of random, three-dimensional, periodic, tetrafunctional networks in response to a volume-preserving tensile strain. For the intranode force, we use a polynomial fit to a purely enthalpic ab initio force extension curve for extended polyisoprene. The simulation includes a relaxation procedure to minimize the node forces and enforces chain rupture when the extension of a network chain reaches the ab initio rupture strain. For the reasonable assumption that the distribution of network chain lengths is Gaussian, we find that the calculated snap-back velocity, temperature increase due to chain ruptures and predicted tensile stress versus strain curve are consistent with experimental data in the moderate to high extension regime. Our results show that a perfect tetrafunctional polyisoprene network is extremely robust, capable of supporting tensile stresses at least a factor of 10 greater than what is observed experimentally.

36 MATERIALS SCIENCE↗

In Vitro Spoilation of Silicone-Hydrogel Soft Contact Lenses in a Model-Blink Cell

In this work, we developed an in vitro model-blink cell that reproduces the mechanism of in vivo fouling of soft contact lenses. In the model-blink cell, model tear lipid directly contacts the lens surface after forced aqueous rupture, mirroring the pre-lens tear-film breakup during interblink. Soft contact lenses are attached to a Teflon holder and immersed in artificial tear solution with protein, salts, and mucins. Artificial tear-lipid solution is spread over the air/tear interface as a duplex lipid layer. The aqueous tear film is periodically ruptured and reformed by withdrawing and reinjecting tear solution into the cell, mimicking the blink-rupture process. Fouled deposits appear on the lenses after cycling, and their compositions and spatial distributions are subsequently analyzed by optical microscopy, laser ablation electrospray ionization mass spectrometry, and two-photon fluorescence confocal scanning laser microscopy. Discrete deposit (white) spots with an average size of 20 to 300 μm are observed on the studied lenses, confirming what is seen in vivo and validating the in vitro model-blink cell. Targeted lipids (cholesterol) and proteins (albumin from bovine serum) are identified in the discrete surface deposits. Both lipid and protein occur simultaneously in the surface deposits and overlap with the white spots observed by optical microscopy. Additionally, lipid and protein penetrate into the bulk of tested silicone-hydrogel lenses, likely attributed to the bicontinuous microstructure of oleophilic silicone and hydrophilic polymer phases of the lens. In vitro spoilation of soft contact lenses is successfully achieved by the model-blink cell confirming the tear rupture/deposition mechanism of lens fouling. The model-blink cell provides a reliable laboratory tool for screening new antifouling lens materials, surface coatings, and care solutions.

60 APPLIED LIFE SCIENCES↗

Study of Air Ingress Across the Duct During the Accident Conditions

The goal of this project is to study the fundamental physical phenomena associated with air ingress in very high temperature reactors (VHTRs). Air ingress may occur due to a rupture of primary piping and a subsequent breach in the primary pressure boundary in helium-cooled and graphite-moderated VHTRs. Significant air ingress is a concern because it introduces potential to expose the fuel, graphite support rods, and core to a risk of severe graphite oxidation. Two of the most probable air ingress scenarios involve rupture of a control rod or fuel access standpipe, and rupture in the main coolant pipe on the lower part of the reactor pressure vessel. Therefore, establishing a fundamental understanding of air ingress phenomena is critical in order to rationally evaluate safety of existing VHTRs and develop new designs that minimize these risks. But despite this importance, progress toward development these predictive capabilities has been slowed by the complex nature of the underlying phenomena. The combination of inter-diffusion among multiple species, molecular diffusion, natural convection, and complex geometries, as well as the multiple chemical reactions involved, impose significant roadblocks to both modeling and experiment design. The project team will employ a coordinated experimental and computational effort that will help gain a deeper understanding of multiphased air ingress phenomena. This project will enhance advanced modeling and simulation methods, enabling calculation of nuclear power plant transients and accident scenarios with a high degree of confidence. The following are the project tasks: Perform particle image velocimetry measurement of multiphase air ingresses; and, Perform computational fluid dynamics analysis of air ingress phenomena.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The Treatment of ISI Uncertainty in xLPR

The U.S. Nuclear Regulatory Commission (NRC) in cooperation with the nuclear industry is constructing an improved probabilistic fracture model for 'extremely Low Probability of Rupture' in the piping of a nuclear power plant called xLPR. This paper focuses on the xLPR model's treatment of uncertainty for in-service inspection. In the xLPR model, uncertainty is classified as either aleatory or epistemic, and both types of uncertainty are described with probability distributions. Earlier PFM models included aleatory, but ignored epistemic, uncertainty, or attempted to deal with epistemic uncertainty by use of conservative bounds. Thus, inclusion of both types of uncertainty in xLPR should produce more realistic results than the earlier models. This work shows that by including epistemic uncertainty in the xLPR ISI module, there can be a significant effect on rupture probability; however, this depends upon the specific scenarios being studied. Some simple scenarios are presented to illustrate those where there is no effect and those having a significant effect on the probability of rupture.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Experimental study of Siphon breaker about size effect in real scale reactor design

Rupture accident within the pipe of a nuclear reactor is one of the main causes of a loss of coolant accident (LOCA). Siphon-breaking is a passive method that can prevent a LOCA. In this study, either a line or a hole is used as a siphon-breaker, and the effect of various parameters, such as the siphon-breaker size, pipe rupture point, pipe rupture size, and the presence of an orifice, are investigated using an experimental facility similar in size to a full-scale reactor. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of UTP A 2133 Mn as a Matching Filler Metal for Alloy 800H in Section III, Division 5 Applications

Six alloys are qualified in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC) for elevated-temperature nuclear components. Due to reactor design alloy restrictions and motivation to improve operational efficiency and plant lifetimes, it is necessary to maximize the usefulness of qualified alloys. One of these alloys is Alloy 800H, which is qualified for a maximum temperature of 760°C and a maximum 300,000-hour service life. However, the welding filler metals qualified to join Alloy 800H have stress rupture factors that reduce the allowable weldment strength by factors as low as 0.59 times the Alloy 800H base metal. In an effort to improve the weldment creep-rupture performance, or to increase the stress reduction factor, non-code qualified filler metals are under investigation by the Department of Energy?s Advanced Reactor Technologies program. For this investigation, UTP A 2133 Mn filler metal (Fe-Cr-Ni-Mn-Nb) was used to join 0.5 in. thick Alloy 800H plate to demonstrate passing an ASME BPVC Section IX weld qualification. The multi-pass, pulsed GTAW process showed successful weld qualification results, and additional property measurements were conducted to compare previous analyses of Alloy 82 and Alloy 617 filler metals. Future work will evaluate the cross-weld creep-rupture performance of the UTP A 2133 Mn in comparison to Alloy 82 and Alloy 617 filler metals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On factors controlling precursor slip fronts in the laboratory and their relation to slow slip events in nature

Spatial variations in frictional properties on natural faults are believed to be a factor influencing the presence of slow slip events (SSEs). This effect was tested on a laboratory frictional interface between two polymethyl methacrylate (PMMA) bodies. We studied the evolution of slip and slip rates that varied systematically based on the application of both high and low normal stress (σ 0 =0.8 or 0.4 MPa) and the far-field loading rate (V LP ). A spontaneous, frictional rupture expanded from the central, weaker, and more compliant section of the fault that had fewer asperities. Slow rupture propagated at speeds V slow ~0.8 to 26 mm s -1 with slip rates from 0.01 to 0.2 μm s -1 , resulting in stress drops around 100 kPa. During certain nucleation sequences, the fault experienced a partial stress drop, referred to as precursor detachment fronts in tribology. Only at the higher level of normal stress did these fronts exist, and the slip and slip rates mimicked the moment and moment release rates during the 2013–2014 Boso SSE in Japan. The laboratory detachment fronts showed rupture propagation speeds V slow /V R ϵ (5 to 172) × 10 -7 and stress drops ~ 100 kPa, which both scaled to the aforementioned SSE. Distributions of asperities, measured using a pressure sensitive film, increased in complexity with additional normal stress—an increase in normal stress caused added complexity by increasing both the mean size and standard deviation of asperity distributions, and this appeared to control the presence of the detachment front.

58 GEOSCIENCES↗

Physics-Based Hazard Assessment for Critical Structures Near Large Earthquake Sources

We argue that for critical structures near large earthquake sources: (1) the ergodic assumption, recent history, and simplified descriptions of the hazard are not appropriate to rely on for earthquake ground motion prediction and can lead to a mis-estimation of the hazard and risk to structures; (2) a physics-based approach can address these issues; (3) a physics-based source model must be provided to generate realistic phasing effects from finite rupture and model near-source ground motion correctly; (4) wave propagations and site response should be site specific; (5) a much wider search of possible sources of ground motion can be achieved computationally with a physics-based approach; (6) unless one utilizes a physics-based approach, the hazard and risk to structures has unknown uncertainties; (7) uncertainties can be reduced with a physics-based approach, but not with an ergodic approach; (8) computational power and computer codes have advanced to the point that risk to structures can be calculated directly from source and site-specific ground motions. Spanning the variability of potential ground motion in a predictive situation is especially difficult for near-source areas, but that is the distance at which the hazard is the greatest. The basis of a “physical-based” approach is ground-motion syntheses derived from physics and an understanding of the earthquake process. This is an overview paper and results from previous studies are used to make the case for these conclusions. Our premise is that 50 years of strong motion records is insufficient to capture all possible ranges of site and propagation path conditions, rupture processes, and spatial geometric relationships between source and site. Predicting future earthquake scenarios is necessary; models that have little or no physical basis but have been tested and adjusted to fit available observations can only “predict” what happened in the past, which should be considered description as opposed to prediction. Finally, we have developed a methodology for synthesizing physics-based broadband ground motion that incorporates the effects of realistic earthquake rupture along specific faults and the actual geology between the source and site.

58 GEOSCIENCES↗

Numerical Simulation of M9 Megathrust Earthquakes in the Cascadia Subduction Zone

We estimate ground motions in the Pacific Northwest urban areas during M9 subduction scenario earthquakes on the Cascadia megathrust by simulating wave propagation from an ensemble of kinematic source descriptions. Velocities and densities in our computational mesh are defined by integrating the regional Cascadia Community Velocity Model (CVM) v1.6 (Stephenson et al. P-and S-wave velocity models incorporating the Cascadia subduction zone for 3D earthquake ground motion simulations—update for open-file report 2007–1348, US Geological Survey, 2017) including the ocean water layer with a local velocity model of the Georgia basin (Molnar, Predicting earthquake ground shaking due to 1D soil layering and 3D basin structure in SW British Columbia, Canada, 2011), including additional near-surface velocity information. We generate six source realizations, each consisting of a background slip distribution with correlation lengths, rise times and rupture velocities consistent with data from previous megathrust earthquakes (e.g., 2011 M 9 Tohoku or 2010 M 8.8 Maule). We then superimpose M ~ 8 subevents, characterized by short rise times and high stress drops on the background slip model to mimic high-frequency strong ground motion generation areas in the deeper portion of the rupture (Frankel, Bull Seismol Soc Am 107(1):372–386, 2017). The wave propagation is simulated using the discontinuous mesh (DM) version of the AWP finite difference code. We simulate frequencies up to 1.25 Hz, using a spatial discretization of 100 m in the fine grid, resulting in surface grid dimensions of 6540 × 10,728 mesh points. At depths below 8 km, the grid step increases to 300 m. We obtain stable and accurate results for the DM method throughout the simulation time of 7.5 min as verified against a solution obtained with a uniform 100 m grid spacing. Peak ground velocities (PGVs) range between 0.57 and 1.0 m/s in downtown Seattle and between 0.25 and 0.54 m/s in downtown Vancouver, while spectral accelerations at 2 s range between 1.7 and 3.6 m/s 2 and 1.0 and 1.3 m/s 2 , respectively. These long-period ground motions are not significantly reduced if plastic Drucker-Prager yielding in shallow cohesionless sediments is taken into account. Effects of rupture directivity are significant at periods of ~ 10 s, but almost absent at shorter periods. We find that increasing the depth extent of the subducting slab from the truncation at 60 km in the Cascadia CVM version 1.6 to ~ 100 km increases the PGVs by 15% in Seattle and by 40% in Vancouver.

finite difference method↗