SEARCH · Engineering Papers

Results for “RESOLUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

DOE OSTI2017

High-Resolution X-Ray and Neutron Computed Tomography of an Engine Combustion Network Spray G Gasoline Injector

Given the importance of the fuel-injection process on the combustion and emissions performance of gasoline direct injected engines, there has been significant recent interest in understanding the fluid dynamics within the injector, particularly around the needle and through the nozzles. Furthermore, the pressure losses and transients that occur in the flow passages above the needle are also of interest. Simulations of these injectors typically use the nominal design geometry, which does not always match the production geometry. Computed tomography (CT) using x-ray and neutron sources can be used to obtain the real geometry from production injectors, but there are trade-offs in using these techniques. X-ray CT provides high resolution, but cannot penetrate through the thicker parts of the injector. Neutron CT has excellent penetrating power but lower resolution. Here, we present results from a joint effort to characterize a gasoline direct injector representative of the Spray G injector as defined by the Engine Combustion Network. High-resolution (1.2 to 3 µm) x-ray CT measurements from the Advanced Photon Source at Argonne National Laboratory were combined with moderate-resolution (40 µm) neutron CT measurements from the High Flux Isotope Reactor at Oak Ridge National Laboratory to generate a complete internal geometry for the injector. This effort combined the strengths of both facilities’ capabilities, with extremely fine spatially resolved features in the nozzles and injector tips and fine resolution of internal features of the needle along the length of injector. Analysis of the resulting surface model of the internal fluid flow volumes of the injector reveals how the internal cross-sectional area and nozzle hole geometry differs slightly from the design dimensions. A simplified numerical simulation of the internal flow shows how deviations from the design geometry can alter the flow inside the sac and holes. Our results of this study will provide computational modelers with very accurate solid and surface models for use in computational fluid dynamics studies and experimentalists with increased insight into the operating characteristics of their injectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2019

Impact of light-absorbing particles on snow albedo darkening and associated radiative forcing over high-mountain Asia: high-resolution WRF-Chem modeling and new satellite observations

Light-absorbing particles (LAPs), mainly dust and black carbon, can significantly impact snowmelt and regional water availability over high-mountain Asia (HMA). In this study, for the first time, online aerosol–snow interactions are enabled and a fully coupled chemistry Weather Research and Forecasting (WRF-Chem) regional model is used to simulate LAP-induced radiative forcing on snow surfaces in HMA at relatively high spatial resolution (12 km, WRF-HR) compared with previous studies. Simulated macro- and microphysical properties of the snowpack and LAP-induced snow darkening are evaluated against new spatially and temporally complete datasets of snow-covered area, grain size, and impurity-induced albedo reduction over HMA. A WRF-Chem quasi-global simulation with the same configuration as WRF-HR buta coarser spatial resolution (1°, WRF-CR) is also used to illustrate the impact of spatial resolution on simulations of snow properties and aerosol distribution over HMA. Due to a more realistic representation of terrain slopes over HMA, the higher-resolution model (WRF-HR) shows significantly better performance in simulating snow area cover, duration of snow cover, snow albedo and snow grain size over HMA, as well as an evidently better atmospheric aerosol loading and mean LAP concentration in snow. However, the differences in albedo reduction from model and satellite retrievals is large during winter due to associated overestimation in simulated snow fraction. It is noteworthy that Himalayan snow cover has high magnitudes of LAP-induced snow albedo reduction (4% - 8%) in pre-monsoon seasons (both from WRF-HR and satellite estimates), which induces a snow-mediated radiative forcing of ~30-50 W m -2 . As a result, the Himalayas (specifically the western Himalayas) hold the most vulnerable glaciers and mountain snowpack to the LAP-induced snow darkening effect within HMA. In summary, coarse spatial resolution and absence of snow–aerosol interactions over the Himalayan cryosphere will result insignificant underestimation of aerosol effects on snow melting and regional hydroclimate.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

The effect of geographic sampling on evaluation of extreme precipitation in high-resolution climate models

Traditional approaches for comparing global climate models and observational data products typically fail to account for the geographic location of the underlying weather station data. For modern global high-resolution models with a horizontal resolution of tens of kilometers, this is an oversight since there are likely grid cells where the physical output of a climate model is compared with a statistically interpolated quantity instead of actual measurements of the climate system. In this paper, we quantify the impact of geographic sampling on the relative performance of high-resolution climate model representations of precipitation extremes in boreal winter (December–January–February) over the contiguous United States (CONUS), comparing model output from five early submissions to the HighResMIP subproject of the CMIP6 experiment. We find that properly accounting for the geographic sampling of weather stations can significantly change the assessment of model performance. Across the models considered, failing to account for sampling impacts the different metrics (extreme bias, spatial pattern correlation, and spatial variability) in different ways (both increasing and decreasing). We argue that the geographic sampling of weather stations should be accounted for in order to yield a more straightforward and appropriate comparison between models and observational data sets, particularly for high-resolution models with a horizontal resolution of tens of kilometers. While we focus on the CONUS in this paper, our results have important implications for other global land regions where the sampling problem is more severe.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Effects of spatial resolution on WRF v3.8.1 simulated meteorology over the central Himalaya

The sensitive ecosystem of the central Himalayan (CH) region, which is experiencing enhanced stress from anthropogenic forcing, requires adequate atmospheric observations and an improved representation of the Himalaya in the models. However, the accuracy of atmospheric models remains limited in this region due to highly complex mountainous topography. This article delineates the effects of spatial resolution on the modeled meteorology and dynamics over the CH by utilizing the Weather Research and Forecasting (WRF) model extensively evaluated against the Ganges Valley Aerosol Experiment (GVAX) observations during the summer monsoon. The WRF simulation is performed over a domain (d01) encompassing northern India at 15 km x 15 km resolution and two nests (d02 at 5 km x 5 km and d03 at 1 km x 1 km) centered over the CH, with boundary conditions from the respective parent domains. WRF simulations reveal higher variability in meteorology, e.g., relative humidity (RH = 70.3%-96.1%) and wind speed (WS = 1.1-4.2m s(-1)), compared to the ERA-Interim reanalysis (RH D 80.0%-85.0%, WS D 1.2-2.3m s(-1)) over northern India owing to the higher resolution. WRF-simulated temporal evolution of meteorological variables is found to agree with balloon-borne measurements, with stronger correlations aloft (r = 0.44-0.92) than those in the lower troposphere (r = 0.18-0.48). The model overestimates temperature (warm bias by 2.8 degrees C) and underestimates RH (dry bias by 6.4 %) at the surface in d01. Model results show a significant improvement in d03 (P = 827.6 hPa, T = 19.8 degrees C, RH = 92.3 %), closer to the GVAX observations (P = 801.4 hPa, T = 19.5 degrees C, RH = 94.7 %). Interpolating the output from the coarser domains (d01, d02) to the altitude of the station reduces the biases in pressure and temperature; however, it suppresses the diurnal variations, highlighting the importance of well-resolved terrain (d03). Temporal variations in near-surface P, T, and RH are also reproduced by WRF in d03 to an extent (r>0:5). A sensitivity simulation incorporating the feedback from the nested domain demonstrates the improvement in simulated P, T, and RH over the CH. Our study shows that the WRF model setup at finer spatial resolution can significantly reduce the biases in simulated meteorology, and such an improved representation of the CH can be adopted through domain feedback into regional-scale simulations. Interestingly, WRF simulates a dominant easterly wind component at 1 km x 1 km resolution (d03), which is missing in the coarse simulations; however, the frequency of southeasterlies remains underestimated. The model simulation implementing a highresolution (3 s) topography input (SRTM) improved the prediction of wind directions; nevertheless, further improvements are required to better reproduce the observed local-scale dynamics over the CH.

Singh, Jaydeep↗

NASA NTRS1971

Information content of simulated space photographs as a function of various levels of image resolution.

The results of research are reported on the information content in simulated space photographs derivable as a function of various levels of image resolution. Whenever certain resource features could not be consistently identified on simulated low-resolution imagery, attempts were made to define the required level of image resolution that would allow a skilled interpreter to discriminate one feature from another. The results of this research, conducted within a chaparral-hardwood-grassland environment in California, indicate that simulated ERTS data contain sufficient information to allow an interpreter to discriminate between woody vegetation, grassland, and water bodies. However, if more detailed information is desired, the imagery must have a ground resolution of at least 50 ft, showing shape, size, texture, and shadow characteristics within each vegetation type. Spaceborne data, therefore, often will have to be supplemented by higher resolution aircraft imagery, depending on the types of resource information being sought.

Lauer, D. T.↗

NASA NTRS1976

Forest Classification Accuracy as Influenced by Multispectral Scanner Spatial Resolution

The author has identified the following significant results. A supervised classification within two separate ground areas of the Sam Houston National Forest was carried out for two sq meters spatial resolution MSS data. Data were progressively coarsened to simulate five additional cases of spatial resolution ranging up to 64 sq meters. Similar processing and analysis of all spatial resolutions enabled evaluations of the effect of spatial resolution on classification accuracy for various levels of detail and the effects on area proportion estimation for very general forest features. For very coarse resolutions, a subset of spectral channels which simulated the proposed thematic mapper channels was used to study classification accuracy.

Nalepka, R. F.↗

NASA NTRS1979

Derivation of clear-column temperature profiles with high vertical resolution and accuracy

It is noted that the optimum tradeoff between accuracy and resolution for current sounders leads to an rms accuracy of 2.5 K and a vertical resolution of about 5 km, while current numerical weather prediction models require temperature profiles with an accuracy of 1-1.5 K and a vertical resolution of about 2 km in the troposphere. The present paper shows that improvements in both the vertical resolution and accuracy require improvements in the informational content of the sounding systems and cannot be achieved by numerical means alone. Results are presented from a sounding system with narrow band channels to illustrate the improvements which can be achieved with future sounders. Finally, the results of several numerical simulations are discussed which show that clear column temperature profiles can be derived in the presence of clouds with an rms accuracy of 1.5 K and vertical resolution of 2 km in the troposphere.

Chahine, M. T.↗

NASA NTRS1981

The relative contributions of increased resolution in the data assimilation and in the forecast model to satellite data impact

Assimilation cycles were carried out with two versions of the GLAS second order GCM: a coarse version with 4 deg latitude by 5 deg longitude resolution, called the C model, and a fine version with 2.5 deg latitude by 3 deg longitude resolution called the F model. For the two DST-6 cases where the combined influence of satellite data and model resolution are at a maximum at sea level, the relative contributions of increased resolution in the data assimilation and in the forecast models were evaluated. F model forecasts were generated from the C model SAT assimilation interpolated by the F grid, and C model forecasts were generated from the F model SAT assimilation interpolated to the C grid. These forecasts were then compared with the corresponding forecasts which had utilized the same grid resolution in the data assimilation and forecast models, CS and FS.

Atlas, R.↗

NASA NTRS1981

Resolution requirements for a soil moisture imaging radar

Image simulation techniques were employed to establish the relationship between spatial resolution and the accuracy of soil moisture estimated by an imaging radar. A spaceborne synthetic aperture radar at an orbital altitude of 600 km, operating at 4.5 GHz with HH polarization configuration and covering a ground swath width of 143 km corresponding to an angle of incidence range extending between 7-22 degrees relative to the vertical, provided the images simulated by a 17.7 km x 19.3 km test site. The role of resolution was evaluated by simulating various sets of images with resolutions ranging from 20 m x 20 m to 1 km x 1 km. Each simulated image was subjected to a soil moisture prediction algorithm whose input is limited to the image intensity level. Results show that the 1 km x 1 km resolution provides the best prediction accuracy for most soil moisture distributions except for drought-like conditions for which the 100 m x 100 m resolution is found to be preferred. In general it was found that the soil moisture of about 90% of the pixels is predicted with an error of + or - 20% of field capacity or less.

Dobson, C.↗

NASA NTRS1984

Research Relative to High Spatial Resolution Passive Microwave Sounding Systems

Methods to obtain high resolution passive microwave weather observations, and understanding of their probable impact on numerical weather prediction accuracy were investigated. The development of synthetic aperture concepts for geosynchronous passive microwave sounders were studied. The effects of clouds, precipitation, surface phenomena, and atmospheric thermal fine structure on a scale of several kilometers were examined. High resolution passive microwave sounders (e.g., AMSU) with an increased number of channels will produce initialization data for numerical weather prediction (NWP) models with both increased spatial resolution and coverage. The development of statistical models for error growth in high resolution primitive equation NWP models which permit the consequences of various observing system alternatives, including sensors and assimilation times and procedures is discussed. A high resolution three dimensional primitive equation NWP model to determine parameters in an error growth model similar to that formulated by Lorenz, but with more degrees of freedom is utilized.

Staelin, D. H.↗

NASA NTRS1988

High resolution infrared absorption spectra of various trace gases present in the upper atmosphere of the Earth

The objective of NASA Grant NsG 7473 was to obtain and analyze high resolution infrared absorption spectra of various trace gases present in the Earth's upper atmosphere. The goal of the spectral analysis was to obtain values of absorption line strengths, widths and frequencies of sufficient accuracy for use in upper atmosphere trace gas monitoring. During the early phase of the grant, high resolution spectra were obtained from two instruments. One was the 0.02/cm resolution vacuum grating spectrometer at the Florida State University and the other was the 0.01/cm resolution Fourier transform spectrometer at the McMath solar telescope at the Kitt Peak Observatory. Using these instruments, a considerable amount of spectra of methane and hydrogen peroxide were obtained and analyzed. During the latter years of the project, data taking was halted while efforts were devoted to building a new 0.0025/cm resolution vacuum Fourier transform spectrometer. Progress during this phase of the grant then became greatly slowed due to a lack of suitable graduate students in the program. However, the instrument was completed and brought to the point of producing interferograms.

Hunt, Robert H.↗

NASA NTRS1987

High resolution Viking Orbiter images: A useful data source for testing the viability of geomorphic processes attributed to Martian landforms

The diversity of landforms visible in the Viking images of Mars have led to a proliforation of geomorphic agents proposed to be active in shaping the Martian surface. While it is likely that numerous different processes have contributed to the geomorphology of Mars throughout Martian history, it is important that proposed Martian geomorphic agents be subjected to critical scrutiny by the scientific community. High resolution Viking Orbiter images represent a data set for investigating geomorphic processes on Mars. Geologic mapping of Mars can take place at a variety of scales, utilizing a variety of image resolutions, but an interpretation of the history of individual landforms is dependent upon the best available spatial resolution. These high resolution images provide the opportunity to examine proposed Martian geomorphic processes. It is clear that researchers may not interpret features in the same way but it is important that high resolution images of candidate features be made available to the scientific community so that a consensus can be reached. This procedure can provide a way to refine the understanding of geomorphic processes on Mars.

Zimbelman, James R.↗

NASA NTRS1987

The effect of increased horizontal resolution on GLA Fourth Order model forecasts

A benchmark series of ten-day weather forecasts has been run with the GLA Fourth Order GCM with both a 4 deg latitude by 5 deg longitude resolution and a 2 deg latitude by 2.5 deg longitude resolution. Ensemble statistics of forecast skill and maps of systematic error fields have been generated for both resolutions. The enhanced resolution added 24 hours of useful predictive skill to the sea level pressure forecasts and 6 hours to the 500 mb height forecasts, but 5 to 6 days into the forecasts the advantage of the finer resolution was lost. The systematic error fields showed that by 8 days the 'climate drift' of the 2 x 2.5 deg forecasts had become pronounced and had caused the loss of predictive skill relative to the 4 x 5 deg forecasts. Additional results indicate that a gravity wave drag parameterization scheme might alleviate the climate drift problem.

Helfand, H. M.↗

NASA NTRS1988

Vertical resolution of middle atmospheric measurements by ground-based microwave radiometry

The vertical resolution obtainable through measurement of trace constituents in the middle atmosphere by ground-based microwave spectroscopy has remained somewhat ambiguous. In order to explore this question, the Backus-Gilbert (1967, 1968, 1970) inversion technique, which automatically yields quantitative estimates of the inversion spatial resolution was applied to this particular inverse problem. This indicated that the optimum resolution of Backus-Gilbert inversions of microwave spectroscopic measurements is about 10 km. A general technique, based on inversion of delta function simulated profiles, was then developed, for evaluating the resolution of any inversion technique and applied to the Chahine (1970) inversion technique. These results indicated that the optimum resolution of the Chahine technique is about 6 or 7 km, or nearly a factor of 2 better than the equivalent Backus-Gilbert results.

Bevilacqua, Richard M.↗

NASA NTRS1988

Selecting a spatial resolution for estimation of per-field green leaf area index

For any application of multispectral scanner (MSS) data, a user is faced with a number of choices concerning the characteristics of the data; one of these is their spatial resolution. A pilot study was undertaken to determine the spatial resolution that would be optimal for the per-field estimation of green leaf area index (GLAI) in grassland. By reference to empirically-derived data from three areas of grassland, the suitable spatial resolution was hypothesized to lie in the lower portion of a 2-18 m range. To estimate per-field GLAI, airborne MSS data were collected at spatial resolutions of 2 m, 5 m and 10 m. The highest accuracies of per-field GLAI estimation were achieved using MSS data with spatial resolutions of 2 m and 5 m.

Curran, Paul J.↗

NASA NTRS1990

High spectral resolution reflectance spectroscopy of minerals

The reflectance spectra of minerals are studied as a function of spectral resolution in the range from 0.2 to 3.0 microns. Selected absorption bands were studied at resolving powers as high as 2240. At resolving powers of approximately 1000, many OH-bearing minerals show diagnostic sharp absorptions at the resolution limit. At low resolution, some minerals may not be distinguishable, but as the resolution is increased, most can be easily identified. As the resolution is increased, many minerals show fine structure, particularly in the OH-stretching overtone region near 1.4 micron. The fine structure can enhance the ability to discriminate between minerals, and in some cases the fine structure can be used to determine elemental composition.

Clark, Roger N.↗

NASA NTRS1991

High resolution atmospheric and surface variability from combined MAMS and VAS radiances

Measuring of the variation of atmospheric and surface quantities such as moisture and stability at small scales is an important step to monitoring, understanding and forecasting mesoscale processes. For instance, moisture and stability products from the geostationary platform VISSR Atmospheric Sounder (VAS) exhibit interesting detail at the meso B (20-200 km) level (Chesters et al., 1986; Smith et al., 1985). However, variations at the meso C scale (2-20 km) and at the lower end of the meso B scale (20-100 km) suffer from the effects of noise. Noise can be greatly reduced by using a high resolution data collection system. The Multispectral Atmospheric Mapping Sensor (MAMS), with its 100-m resolution over a 36km swath, is well suited to provide high resolution mesoscale information about the atmosphere and surface of the earth. A more complete depiction of the atmospheric state at the smaller scales is possible through the combination of the high horizontal resolution MAMS data with the vertical sounding data of the VAS. This paper demonstrates a procedure for combining MAMS and VAS data in a physical retrieval to produce high resolution derived products of precipitable water (PW), lifted index (LI), and skin temperature (TS). The variability of these products is evaluated in a structure function analysis similar to that of Hillger and Vonder Haar (1979). Results for 19 June 1986 from the Cooperative Hunstville Meteorological Experiment (COHMEX) are presented.

Moeller, Christopher C.↗

NASA NTRS1993

An atlas of high-resolution IRAS maps on nearby galaxies

An atlas of far-infrared IRAS maps with near 1 arcmin angular resolution of 30 optically large galaxies is presented. The high-resolution IRAS maps were produced with the Maximum Correlation Method (MCM) image construction and enhancement technique developed at IPAC. The MCM technique, which recovers the spatial information contained in the overlapping detector data samples of the IRAS all-sky survey scans, is outlined and tests to verify the structural reliability and photometric integrity of the high-resolution maps are presented. The infrared structure revealed in individual galaxies is discussed. The atlas complements the IRAS Nearby Galaxy High-Resolution Image Atlas, the high-resolution galaxy images encoded in FITS format, which is provided to the astronomical community as an IPAC product.

Rice, Walter↗