Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RELEASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

The influence of cladding on fission gas release from irradiated U-Mo monolithic fuel

The monolithic uranium-molybdenum (U-Mo) alloy has been proposed as a fuel design capable of converting the world’s highest power research reactors from use of high enriched uranium to low enriched uranium. However, a zirconium (Zr) diffusion barrier must be used to eliminate interactions that form during fabrication and are enhanced during irradiation between the U-Mo monolith and aluminum alloy 6061 (AA6061) cladding. One aspect of fuel development and qualification is to demonstrate appropriate understanding of the extent of fission product release from the fuel under anticipated service environments. An exothermic reaction has previously been observed between the AA6061 cladding and Zr diffusion layer. In this paper, two fuel segments with different irradiation history were subjected to specified thermal profiles under a controlled atmosphere using a thermogravimetric/differential thermal analyzer coupled with a mass spectrometer inside a hot cell. Samples from each segment were tested with cladding and without cladding to investigate the effect, if any, that the exothermic reaction has on fission gas release mechanisms. Measurements revealed there is an instantaneous effect of the cladding/Zr exothermic reaction, but not necessarily a cumulative effect above approximately 973 K (700 oC). The mechanisms responsible for fission gas release events are discussed.

cl↗

Effect of solution chemistry on the iodine release from iodoapatite in aqueous environments

To ensure the safe disposal of nuclear waste, understanding the release process of radionuclides retained in the nuclear waste forms is of vital importance. Iodoapatite Pb 9.85 (VO 4 ) 6 I 1.7 , a potential waste form for iodine-129, was selected as a model system for ceramic waste forms in this study to understand the effect of aqueous species on iodine release. Semi-dynamic leaching tests were conducted on bulk samples in cap-sealed Teflon vessels with 0.1 mol/L NaCl, Na 2 CO 3 , Na 3 PO 4 , and Na 2 SO 4 solutions under 90 °C, fixed sample surface area to solution volume ratio of 5/m, and periodic replacement of leaching solutions. The reacted solutions were then analyzed by Inductively Coupled Plasma-Mass Spectrometry and Inductively Coupled Plasma-Optical Emission Spectrometry; the leached surfaces were characterized by X-ray diffraction, scanning electron microscopy, and infrared spectroscopy. The finding shows that, compared to deionized water, the ion-rich solutions enhanced the iodine release as a result of the increased ionic strength, reduced activity coefficient of dissolved species, and increased solution pH. Surface reactions can lead to the formations of secondary phases by ion-exchange and precipitation. These findings indicate that an ion-rich environment in the geological repository can be detrimental to the disposal safety of the nuclear waste form.

36 MATERIALS SCIENCE↗

Fission gas diffusion and release for Cr 2 O 3 -doped UO 2 : From the atomic to the engineering scale

Here, the anticipated benefits of large grains in Cr 2 O 3 -doped UO 2 pellets include improved mechanical and fission gas retention properties. To support the assessment of fission gas release (FGR) from doped pellets, the impact of doping on fission gas diffusivity for in-reactor conditions must be understood. In this work, we tackle this issue by informing the fission gas model within the BISON fuel performance code using material models developed at the atomic scale. The investigation of intra-granular fission gas diffusivity in Cr 2 O 3 -doped UO 2 is carried out by adapting a cluster dynamics model that, accounting for UO 2 thermochemistry, is capable of describing Xe diffusion under irradiation in undoped UO 2 as the starting point. Using a thermodynamic analysis, it is shown that in stoichiometric UO 2 with additions of Cr 2 O 3 the oxygen potential is defined by the Cr-Cr 2 O 3 two-phase equilibrium. Using the cluster dynamics model, the predicted Xe diffusivity in doped UO 2 was significantly increased in both the intrinsic and irradiation-enhanced regimes compared to undoped UO 2 as a result of higher concentrations of uranium and oxygen vacancies, respectively. This is a consequence of the more oxidizing conditions at high temperature, and more reducing conditions at low temperature, as a result of doping. Arrhenius functions have been fitted to the cluster dynamics results to enable implementation of the new diffusivities in the BISON fission gas behavior model. BISON simulations were carried out, showing the competing effects of the enlarged grains and the new fission gas diffusivity model, which act to suppress and enhance fission gas release, respectively. The new physics-informed model was validated against in-reactor experimental measurements under normal operation. Additionally, benchmarking was carried out for power ramp conditions. The predicted fission gas release agreed well with the experimental data, showing noticeable improvements over the standard UO 2 model.

36 MATERIALS SCIENCE↗

Bayesian uncertainty quantification of tristructural isotropic particle fuel silver release: Decomposing model inadequacy plus experimental noise and parametric uncertainties

Tristructural isotropic (TRISO) particle fuel is one of the most promising fuel concepts enabling high temperature and high burnup reactor operation. One dominant source of radioactivity released from the TRISO particles is silver (Ag), which is subject to a high release fraction and long decay life compared to other fission products. Previous modeling efforts using the fuel performance code BISON indicated nonnegligible uncertainties in modeling the diffusion process of fission products in TRISO compared to the Advanced Gas Reactor experiments. The overall uncertainties observed when modeling the fission product diffusion can result from uncertainties in model parameters, noisy experimental measurements, and deficiencies in the developed models. The three types of underlying uncertainties have not yet been properly quantified in open literature. Here, this paper presents the Bayesian uncertainty quantification (UQ) using massively parallelizable Markov chain Monte Carlo samplers. The uncertainties due to model parameters, model inadequacy, and experimental measurement noise are quantified, with the σ term used to represent the sum of the model inadequacy and measurement noise uncertainties. It is worth noting that this is the first time the σ term is inferred for nuclear fuel experiments, as compared to using prescribed values for uncertainty quantification in previous work. The parallelizable Markov chain Monte Carlo samplers efficiently infer the model parameters and the σ term, giving insight into physical parameters like diffusion coefficients and the combined model discrepancy and measurement noise. A subsequent forward uncertainty quantification (UQ) is also performed based on the calibration results to generate more accurate predictions of the Ag release. The model inadequacy plus experimental noise is the most dominant source of uncertainty compared to the parametric uncertainty. All the UQ analyses presented in this work are based on the second series of the irradiation experiments in the Advanced Gas Reactor program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of AGR-3/4 In-pile Silver Release Predictions Against Post-Irradiation Examination Measurements

Fuel performance modeling codes that accurately predict the transport of radionuclides in high-temperature gas-cooled reactors that utilize tristructural isotopic (TRISO) fuel particles are an important aspect of reactor safety analyses. One objective of the Advanced Gas Reactor (AGR)-3/4 experiment was to assess the transport of fission products through fuel particles and their subsequent release into the compact matrix and structural graphite materials. This was accomplished by irradiating uranium oxycarbide (UCO) driver fuel particles and designed-to-fail (DTF) particles to serve as known sources of fission products. The fission product of particular interest when it comes to such transport is silver (Ag-110 m), as it has a 250-day half-life and has relatively high mobility in the TRISO coating layers. Furthermore, to assess the current modeling capabilities and diffusion parameters employed in the fuel performance codes PARFUME and BISON, the fractional release of silver release predicted by the two codes were compared against post-irradiation examination measurements from the AGR-3/4 experiment.

AGR-3/4 Experiment↗

Solubility and release of fenbufen intercalated in Mg, Al and Mg, Al, Fe layered double hydroxides (LDH): The effect of Eudragit S 100 covering

Following different preparation routes, fenbufen has been intercalated in the interlayer space of layered double hydroxides with Mg{sup 2+} and Al{sup 3+} or Mg{sup 2+}, Al{sup 3+} and Fe{sup 3+} in the layers. Well crystallized samples were obtained in most of the cases (intercalation was not observed by reconstruction of the MgAlFe matrix), with layer heights ranging between 16.1 and 18.8 A. The presence of the LDH increases the solubility of fenbufen, especially when used as a matrix. The dissolution rate of the drug decreases when the drug is intercalated, and is even lower in those systems containing iron; release takes place through ionic exchange with phosphate anions from the solution. Preparation of microspheres with Eudragit S 100 leads to solids with an homogeneous, smooth surface with efficient covering of the LDH surface, as drug release was not observed at pH lower than 7. - Graphical abstract: LDHs containing Mg, Al, Fe increase fenbufen solubility, release takes place through ionic exchange with phosphate anions from the medium. Spherical solids with homogeneous, smooth surface are formed when using Eudragit S 100, efficiently covering the LDH surface. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled drug release on amine functionalized spherical MCM-41

MCM-41 silica with spherical morphology and small particle sizes (100 nm) was synthesized and modified by post-synthesis method with different amounts of 3-aminopropyltriethoxysilane (APTES). A comparative study of the adsorption and release of a model drug, ibuprofen, was carried out. The modified and drug loaded mesoporous materials were characterized by XRD, TEM, N{sub 2} physisorption, elemental analysis, thermal analysis and FT-IR spectroscopy. A new method was developed for the quantitative determination of amino groups in surface modified mesoporous materials by the ninhydrin reaction. Good correlation was found between the amino content of the MCM-41 materials determined by the ninhydrin method and their ibuprofen adsorption capacity. Amino modification resulted in high degree of ibuprofen loading and slow release rate in comparison to the parent non-modified MCM-41. - Graphical abstract: Determination of surface amino groups by ninhidrin method. Highlights: Black-Right-Pointing-Pointer Spherical MCM-41 modified by different amounts of APTES was studied. Black-Right-Pointing-Pointer Ibuprofen (IBU) adsorption and release characteristics was tested. Black-Right-Pointing-Pointer The ninhydrin reaction was used for the quantitative determination of amino groups. Black-Right-Pointing-Pointer Stoichiometric amount of APTES is enough for totally covering the surface with amino groups. Black-Right-Pointing-Pointer Good correlation was found between the amino content and IBU adsorption capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical design of pH-sensitive nanovalves on the outer surface of mesoporous silicas for controlled storage and release of aromatic amino acid

Mesoporous silicas with hexagonally arranged pore channels were synthesized in water–ethanol-ammonia solution using cetyltrimethylammonium bromide as template. Directed modification of silica surface with N-[N′-(N′-phenyl)-2-aminophenyl]-3-aminopropyl groups was realized by postsynthetic activation of halogenoalkylsilicas, which have surface uniformly or selectively distributed 3-chloropropyl groups, with 2-aminodiphenylamine in the liquid phase. Chemical composition of silica materials was estimated by IR spectroscopy and chemical analysis of the surface products of reactions. Characteristics of porous structure of MCM-41-type silicas were determined from X-ray and low-temperature nitrogen ad-desorption measurements. Release ability of synthesized silica carriers was established on encapsulation of 4-aminobenzoic acid in pore channels and subsequent delivery at pH=6.86 and pH=1.00. It was found that N-[N′-(N′-phenyl)-2-aminophenyl]-3-aminopropyl groups block pore entrances at neutral pH preventing 4-aminobenzoic acid release. At pH=1.00 repulsion of positively charged surface aromatic amino groups localized near pore orifices provides unhindered liberation of aromatic amino acid from mesoporous channels. - Graphical abstract: Blocking of pores with N-[N′-(N′-phenyl)-2-aminophenyl]-3-aminopropyl groups at pH=6.86 for storage of ABA and opening of pore entrances at pH=1.00 for unhindered ABA liberation. - Highlights: • Modification of MCM-41 with N-[N′-(N′-phenyl)-2-aminophenyl]-3-aminopropyl groups. • Study of release ability of synthesized silica carriers in relation to amino acid. • Controlled blocking and opening of pores by amino groups at pH change were performed. • Retention of amino acid at pH=6.86 and its liberation at pH=1.00 was proved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corrosion inhibitor storage and release property of TiO{sub 2} nanotube powder synthesized by rapid breakdown anodization method

Graphical abstract: Display Omitted Highlights: ► TiO{sub 2} nanotube powders were synthesized by rapid breakdown anodization method. ► Benzotriazole was loaded into the TiO{sub 2} nanotube powders. ► Low pH induced release of benzotriazole from TiO{sub 2} nanotube powders was proved. -- Abstract: Titanium dioxide (TiO{sub 2}) is one of the most studied substances in material science due to its versatile properties and diverse applications. In this study titanium dioxide nanotube powder were synthesized by rapid breakdown anodization (RBA) method. The synthesis involved potentiostatic anodization of titanium foil in 0.1 M HClO{sub 4} electrolyte under an applied voltage of 20 V and rapid stirring. The morphology and the phase of titanium dioxide nanotube powder were studied using field emission scanning electron microscopy, laser Raman spectroscopy and high resolution transmission electron microscopy. Benzotriazole was chosen as model inhibitor to evaluate TiO{sub 2} nanotube powder's corrosion inhibitor loading and releasing properties. The storage and release properties of TiO{sub 2} nanotube powder were studied using UV–visible spectroscopy and thermogravimetric analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SIMULATION OF RARE ISOTOPE RELEASE FROM ISOL TARGET

Releases of short-lived species from ISOL targets are simulated with computer codes. Analytic solutions to the diffusion equation are compared with those obtained from a finite-difference code for radioactive isotope diffusion release from simple geometry targets. The Monte Carlo technique as a practical means for vapor transport system design is demonstrated by simulating the effusive-flow of neutral particles through complex target-vapor transport systems. Particle release curves involving decay losses in both diffusion and effusive-flow are computed; and a numerical procedure is proposed to measure the diffusion coefficients and the characteristic effusion times of rare isotopes in target-ion source systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THETRIS: A MICRO-SCALE TEMPERATURE AND GAS RELEASE MODEL FOR TRISO FUEL

The dominating mechanism in the passive safety of gas-cooled, graphite-moderated, high-temperature reactors (HTRs) is the Doppler feedback effect. These reactor designs are fueled with sub-millimeter sized kernels formed into TRISO particles that are imbedded in a graphite matrix. The best spatial and temporal representation of the feedback effect is obtained from an accurate approximation of the fuel temperature. Most accident scenarios in HTRs are characterized by large time constants and slow changes in the fuel and moderator temperature fields. In these situations a meso-scale, pebble and compact scale, solution provides a good approximation of the fuel temperature. Micro-scale models are necessary in order to obtain accurate predictions in faster transients or when parameters internal to the TRISO are needed. Since these coated particles constitute one of the fundamental design barriers for the release of fission products, it becomes important to understand the transient behavior inside this containment system. An explicit TRISO fuel temperature model named THETRIS has been developed and incorporated into the CYNOD-THERMIX-KONVEK suite of coupled codes. The code includes gas release models that provide a simple predictive capability of the internal pressure during transients. The new model yields similar results to those obtained with other micro-scale fuel models, but with the added capability to analyze gas release, internal pressure buildup, and effects of a gap in the TRISO. The analyses show the instances when the micro-scale models improve the predictions of the fuel temperature and Doppler feedback. In addition, a sensitivity study of the potential effects on the transient behavior of high-temperature reactors due to the presence of a gap is included. Although the formation of a gap occurs under special conditions, its consequences on the dynamic behavior of the reactor can cause unexpected responses during fast transients. Nevertheless, the strong Doppler feedback forces the reactor to quickly stabilize.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

EARTHQUAKE CAUSED RELEASES FROM A NUCLEAR FUEL CYCLE FACILITY

The fuel cycle facility (FCF) at the Idaho National Laboratory is a nuclear facility which must be licensed in order to operate. A safety analysis is required for a license. This paper describes the analysis of the Design Basis Accident for this facility. This analysis involves a model of the transient behavior of the FCF inert atmosphere hot cell following an earthquake initiated breach of pipes passing through the cell boundary. The hot cell is used to process spent metallic nuclear fuel. Such breaches allow the introduction of air and subsequent burning of pyrophoric metals. The model predicts the pressure, temperature, volumetric releases, cell heat transfer, metal fuel combustion, heat generation rates, radiological releases and other quantities. The results show that releases from the cell are minimal and satisfactory for safety. This analysis method should be useful in other facilities that have potential for damage from an earthquake and could eliminate the need to back fit facilities with earthquake proof boundaries or lessen the cost of new facilities.

99 GENERAL AND MISCELLANEOUS↗

Total kinetic energy release in the fast neutron induced fission of 235 U

The total kinetic energy (TKE) release in the fast neutron induced fission of 235 U was measured for neutron energies E$_n$ = 2 - 100 MeV. The TKE distributions are Gaussian in shape. The mean post neutron emission TKE release decreases non-linearly with increasing neutron energy and can be represented as TKE(MeV) = 170.92-3.73774log 10 E n -0.65028(log 10 E n ) 2 . Abrupt changes in the variances of the TKE distributions are observed at the onset of 2nd, 3rd, etc. chance fission. For E n = 20-100 MeV, the variances are approximately constant. These observations are compared to the predictions of the GEF model for neutron-induced fission. This model describes many of the features of the TKE release adequately.

235U(n,f)↗

The content of DNA and RNA in microparticles released by Jurkat and HL-60 cells undergoing in vitro apoptosis

Microparticles are small membrane-bound vesicles that are released from apoptotic cells during blebbing. These particles contain DNA and RNA and display important functional activities, including immune system activation. Furthermore, nucleic acids inside the particle can be analyzed as biomarkers in a variety of disease states. To elucidate the nature of microparticle nucleic acids, DNA and RNA released in microparticles from the Jurkat T and HL-60 promyelocytic cell lines undergoing apoptosis in vitro were studied. Microparticles were isolated from culture media by differential centrifugation and characterized by flow cytometry and molecular approaches. In these particles, DNA showed laddering by gel electrophoresis and was present in a form that allowed direct binding by a monoclonal anti-DNA antibody, suggesting antigen accessibility even without fixation. Analysis of RNA by gel electrophoresis showed intact 18s and 28s ribosomal RNA bands, although lower molecular bands consistent with 28s ribosomal RNA degradation products were also present. Particles also contained messenger RNA as shown by RT-PCR amplification of sequences for {beta}-actin and GAPDH. In addition, gel electrophoresis showed the presence of low molecular weight RNA in the size range of microRNA. Together, these results indicate that microparticles from apoptotic Jurkat and HL-60 cells contain diverse nucleic acid species, indicating translocation of both nuclear and cytoplasmic DNA and RNA as particle release occurs during death.

60 APPLIED LIFE SCIENCES↗

Wnt interaction and extracellular release of prominin-1/CD133 in human malignant melanoma cells

Prominin-1 (CD133) is the first identified gene of a novel class of pentaspan membrane glycoproteins. It is expressed by various epithelial and non-epithelial cells, and notably by stem and cancer stem cells. In non-cancerous cells such as neuro-epithelial and hematopoietic stem cells, prominin-1 is selectively concentrated in plasma membrane protrusions, and released into the extracellular milieu in association with small vesicles. Previously, we demonstrated that prominin-1 contributes to melanoma cells pro-metastatic properties and suggested that it may constitute a molecular target to prevent prominin-1-expressing melanomas from colonizing and growing in lymph nodes and distant organs. Here, we report that three distinct pools of prominin-1 co-exist in cultures of human FEMX-I metastatic melanoma. Morphologically, in addition to the plasma membrane localization, prominin-1 is found within the intracellular compartments, (e.g., Golgi apparatus) and in association with extracellular membrane vesicles. The latter prominin-1–positive structures appeared in three sizes (small, ≤40 nm; intermediates ∼40–80 nm, and large, >80 nm). Functionally, the down-regulation of prominin-1 in FEMX-I cells resulted in a significant reduction of number of lipid droplets as observed by coherent anti-Stokes Raman scattering image analysis and Oil red O staining, and surprisingly in a decrease in the nuclear localization of beta-catenin, a surrogate marker of Wnt activation. Moreover, the T-cell factor/lymphoid enhancer factor (TCF/LEF) promoter activity was 2 to 4 times higher in parental than in prominin-1-knockdown cells. Collectively, our results point to Wnt signaling and/or release of prominin-1–containing membrane vesicles as mediators of the pro-metastatic activity of prominin-1 in FEMX-I melanoma. - Highlights: ► First report of release of prominin-1–containing microvesicles from cancer cells. ► Pro-metastatic role of prominin-1–containing microvesicles in FEMX-I melanoma. ► Down-regulation of prominin-1 results in decreased nuclear localization of β-catenin. ► Wnt signaling as mediator of the pro-metastatic activity of prominin-1.

60 APPLIED LIFE SCIENCES↗

Melanoma-released exosomes directly activate the mitochondrial apoptotic pathway of CD4+ T cells through their microRNA cargo

Highlights: • B16-exosomes induced the apoptosis of CD4{sup +} T cells. • B16-exosomes promoted the tumor growth by eliminating T cells in the tumor. • B16-exosomes could enter CD4{sup +} T cells and activate caspase family proteins. • MicroRNAs in exosomes may target anti-apoptotic proteins, such as BCL-2. Tumor-derived exosomes (TEX) play an important role in the escape of tumor cells from immune surveillance. However, the details of the mechanism are not fully understood. In this study, the apoptosis of CD4{sup +} T cells increased during treatment with B16-derived exosomes in vitro and in vivo, resulting in accelerated growth of melanoma cells in mice. While the release of exosomes was blocked by disrupting the expression of Rab27a, tumor growth was clearly inhibited, and the percentage of T cells in the tumor environment increased. At the same time, Western blot showed that TEX could increase the activation of caspase-3, caspase-7 and caspase-9 but not caspase-8, down-regulating the anti-apoptotic proteins, including BCL-2, MCL-1 and BCL-xL in CD4{sup +} T cells, and indicating that the TEX activates the mitochondrial apoptotic pathway of CD4{sup +} T cells. These reductions were probably associated with the release of microRNAs, such as miR-690, from TEX to T cells. Our present study reveals for the first time that melanoma-released exosomes may directly activate the mitochondrial apoptotic pathway of CD4{sup +} T cells through their microRNA cargo.

60 APPLIED LIFE SCIENCES↗

Coupled NO and C 3 H 6 Trapping, Release and Conversion on Pd/BEA: Evaluation of the Lean Hydrocarbon NO x Trap

Automotive emission control catalysts are not effective in eliminating CO, hydrocarbons (HCs), and NO x during engine cold start (below 200 °C). In this study, the effectiveness of coupled low-temperature NO x and C 3 H 6 trapping and conversion on the model lean HC NO x trap (LHCNT) consisting of a washcoated Pd/BEA monolith was examined. Transient uptake and release experiments were conducted to obtain insight regarding competitive adsorption, release temperature, conversion activity, and water impact. NO and C 3 H 6 uptake were found to be mutually inhibitive because of competition for adsorption on Brønsted acid sites. During desorption, the existence of multiple NO sorption sites was established. Although C 3 H 6 inhibited NO adsorption on some of these sites, it delayed NO x desorption to higher temperatures. Furthermore, above 200 °C, Pd/BEA was able to catalyze the oxidation of stored HCs and exhibited NO x reduction activity. Addition of water inhibited both NO x and C 3 H 6 uptake, but the inhibition was lessened through a high-temperature thermal pretreatment. Overall, Pd/BEA demonstrates a combination of inhibiting and promoting coupling effects during uptake and release and exhibits activity for both NO x reduction and C 3 H 6 oxidation. Lastly, the findings provide guidance for developing improved LHCNT materials.

42 ENGINEERING↗

Electron-Stimulated Formation and Release of Molecular Hydrogen and Oxygen from Boehmite Nanoplatelet Films

Here, the production and release of H 2 and O 2 during and after electron (100–1000 eV) irradiation of boehmite nanoplatelet films was studied. H 2 and O 2 produced during irradiation likely correspond to electron-induced dissociation of the hydroxyls primarily in the terminal surface layers of the boehmite followed by the H· + H· → H 2 (g) and O + O → O 2 (g) combinative desorption reactions as well as the abstraction reactions H· + >OH – → H 2 (g) + >O·̅. Postirradiation temperature-programmed desorption shows a temperature-dependent release of H 2 but no additional release of O 2 . This process likely involves diffusion and recombination of H· atoms initially trapped between the γ-AlOOH planes followed by recombination at edge and surface sites. H 2 production upon thermal-annealing-irradiated material shows no dependence on incident electron flux, suggesting the precursor species (H·) trapped within the bulk are long-lived.

Jones, Brant M.↗