Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECYCLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Continuation of Research, Commercialization, and Workforce Development in the Polymer/Electronics Recycling Industry

The MARCEE Project was established to understand the problems associated with electronics recycling and to develop solutions that would allow an electronics recycling industry to emerge. While not all of the activities have been funded by MARCEE, but through private investment, they would not have occurred had the MARCEE Project not been undertaken. The problems tackled and the results obtained using MARCEE funds are discussed in detail in this report.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Diagnostics and Recycling of Discarded Automobile Components

Recycling of metal from discarded auto components is expedient and economically efficient. Uses of metal from discarded components are proposed. Information is presented regarding the mechanical properties of structural steels widely used in the auto industry. Technology for recycling of the metal in truck components is identified.

42 ENGINEERING↗

Recycling Electric Vehicle Batteries: Opportunities and Challenges

A surge in electric vehicle production is ushering in a new era of research on the best methods to recycle used lithium-ion batteries. This article describes existing recycling methods and the work needed to establish a more fully circular economy for lithium-ion batteries.

ADVANCED PROPULSION SYSTEMS,DIRECT ENERGY CONVERSI↗

Recycled Paper as a Source of Renewable Jet Fuel in the United States

Converting biomass into jet fuel involves more than the core chemical process. The overall process includes the logistics of harvesting and transporting the biomass, handling and preparing the material for processing, and processing and disposal of waste. All of these activities contribute to cost. Controlling cost involves more than developing efficient process chemistry. Choice of feedstock also has a significant impact on process economics. We consider chemical conversion of paper from municipal solid waste as a feedstock for the production of jet fuel and diesel. Paper has a significantly higher cellulose content than raw lignocellulosic biomass such as corn stover, so it requires less pretreatment to convert it into hydrocarbons than lignocellulosic biomass. Our techno-economic analysis showed that the cost of converting paper waste into jet fuel is about $1.00/gal less than jet fuel produced from corn stover. Although the cost of recycling paper into jet fuel is less than producing it from corn stover, the process is not competitive with petroleum. We estimated a minimum selling price of $3.97/gal for paper-derived jet fuel. Our sensitivity studies indicated that the biggest economic obstacle is the cost of cellulose hydrolysis. Direct hydrogenation of paper to sugar alcohols combined with increased economy of scale could make recycling paper jet fuel competitive.

09 BIOMASS FUELS↗

Advanced biorefinery feedstock from non-recyclable municipal solid waste by mechanical preprocessing

Because of accelerated urbanization and the development of a global economy, a large quantity of municipal solid waste (MSW) has been collected and disposed of by the municipalities. Due to this drastic increase in the disposal of MSW, the need for its management is a must to preserve the environment. Currently, approximately 50% of the total MSW generated in the United States has been utilized through various recycling, combustion, and composting technologies, which means the remaining 50% is sent to landfill; this is often known as non-recyclable MSW (nMSW). As this nMSW is physically and chemically heterogenous and contains very high amounts of inorganic material, processing is required prior to using it as a biorefinery feedstock. Thus, this study focused on how mechanical preprocessing advanced the physical and chemical properties of nMSW. The physical and chemical properties were investigated in terms of particle size distribution, bulk density, ultimate and proximate analysis, and the higher heating value (HHV). The combustion properties were examined in terms of ignition temperature, peak heat release rate, and combustion efficiency. Results showed that the variability of physical and chemical properties of nMSW can be reduced by mechanical preprocessing. For example, the variability of the bulk density of the as-received nMSW was approximately 17.3% while it reduced to 5.8% when the sample size was reduced to 2 mm. Similarly, the variability of ash and HHV reduced from 49.2% to 11.0% and 13.4%–4.2%, respectively. Combustion thermograms showed that the size reduction positively improved the combustion properties. For example, 2 mm of spec sample started to ignite approximately 4 times earlier and took 6.5 folds less time to reach the peak heating rate compared to as-received nMSW. Overall, the mechanical preprocessing reduced the variability of physical and chemical properties in addition to the improvement of combustion behavior of the nMSW which is one step forward toward the biorefinery feedstock.

09 BIOMASS FUELS↗

Mechanical Response and Processability of Wet-Laid Recycled Carbon Fiber PE, PA66 and PET Thermoplastic Composites

The interest in recycled carbon fiber (rCF) is growing rapidly and the supply chain for these materials is gradually being established. However, the processing routes, material intermediates and properties of rCF composites are less understood for designers to adopt them into practice. This paper provides a practical pathway for rCFs in conjunction with low cost and, for the most part, commodity thermoplastic resins, namely polyethylene (PE), polyamide 66 (PA66) and polyethylene terephthalate (PET). Industrially relevant wet-laid (WL) process routes have been adopted to produce mats using two variants of WL mats, namely (a) high speed wet-laid inclined wire to produce broad good ‘roll’ forms and (b) 3DEPTM process patented by Materials Innovation Technologies (MIT)-recycled carbon fiber (RCF), now Carbon Conversions, which involves mixing fibers and water and depositing the fibers on a water-immersed mold. These are referred to as ‘sheet’ forms. The produced mats were evaluated for their processing into composites as ‘fully consolidated mats’ and ‘non-consolidated’ as-produced mats. Comprehensive mechanical data in terms of tensile strength, tensile modulus and impact toughness for rCF C/PE, C/PA66 and C/PET are presented. The work is of high value to sustainable composite designers and modelers.

compression molding↗

Understanding the Effect of Side Reactions on the Recyclability of Furan–Maleimide Resins Based on Thermoreversible Diels–Alder Network

We studied the effect of side reactions on the reversibility of epoxy with thermoreversible Diels–Alder (DA) cycloadducts based on furan and maleimide chemistry. The most common side reaction is the maleimide homopolymerization which introduces irreversible crosslinking in the network adversely affecting the recyclability. The main challenge is that the temperatures at which maleimide homopolymerization can occur are approximately the same as the temperatures at which retro-DA (rDA) reactions depolymerize the networks. Here we conducted detailed studies on three different strategies to minimize the effect of the side reaction. First, we controlled the ratio of maleimide to furan to reduce the concentration of maleimide groups which diminishes the effects of the side reaction. Second, we applied a radical-reaction inhibitor. Inclusion of hydroquinone, a known free radical scavenger, is found to retard the onset of the side reaction both in the temperature sweep and isothermal measurements. Finally, we employed a new trismaleimide precursor that has a lower maleimide concentration and reduces the rate of the side reaction. Our results provide insights into how to minimize formation of irreversible crosslinking by side reactions in reversible DA materials using maleimides, which is important for their application as novel self-healing, recyclable, and 3D-printable materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Sourcing, Refining and Recycling of Rare-Earth Magnets

Permanent magnets today are used in a wide range of transportation, industrial, residential/commercial, consumer electronics, defense, domestic, data storage, wind energy, and medical markets and applications. There are five classes of commercial permanent magnet materials; however, magnets based on Nd-Fe-B account for over 60% of the global magnet production by value. They typically contain around 31 wt.% of rare earth elements (REEs), principally, Nd and Pr, plus Dy for higher-temperature performance. Nd-Fe-B magnets are forecast to grow throughout this decade, largely driven by the growth in electric vehicles of all types. However, several studies forecast a shortfall of the primary REEs from mined resources. In this paper, the sourcing, processing, and recycling of REEs are discussed. Additionally, presented are the advantages and disadvantages of the major recovery and recycling technologies for REEs.

36 MATERIALS SCIENCE↗

Application of Energy-efficient Electromagnetic Melt-Processing for the Upcycling of Recycled Polyphenylene Sulfide into Multifunctional Segregated Nanocomposites

Polyphenylene sulfide (PPS) is widely used in structural and functional composites because of its thermal stability, chemical resistance, and mechanical strength. As circular manufacturing becomes increasingly important, extending the service life of recycled PPS (rPPS) is essential. However, conventional high-temperature reprocessing accelerates thermo-oxidative degradation, reducing recycled composite performance. This study proposes a rapid and potentially energy-saving upcycling strategy for rPPS using electromagnetic (EM) melt-processing to form segregated carbon nanotube (CNT) networks and produce EM-responsive nanocomposites. The aim was to determine whether CNT-assisted EM heating could reduce polymer degradation while improving multifunctional properties at ultralow filler loadings. rPPS micropellets were coated with CNTs by ball milling to create conductive shells, then compacted into green bodies (GBs) and selectively melted by rapid EM irradiation. Structural, electrical, mechanical, rheological, and electromagnetic interference (EMI) shielding properties were evaluated. Electrical percolation occurred at an ultralow CNT loading of 0.08 wt%, with conductivity reaching (1.24 ± 0.74) × 10 -5 S⋅m -1 at 0.1 wt%. At this concentration, tensile strength and modulus increased by 72% and 99%, respectively. At ~ 0.7 mm thickness, X-band EMI shielding effectiveness reached 6 dB for GBs and 3 dB after EM processing. This shows that EM melt-processing upcycles rPPS into high-performance multifunctional nanocomposites with minimum thermal degradation.

recycled↗

Measurements and 2-D Modeling of Recycling and Edge Transport in Discharges with Lithium-coated PFCs in NSTX

The application of lithium coatings on plasma facing components has been shown to profoundly affect plasma performance in the National Spherical Torus Experiment, improving energy confinement and eliminating edge-localized modes. The edge particle balance during these ELM-free discharges has been studied through 2-D plasma-neutrals modeling, constrained by measurements of the upstream plasma density and temperature profiles and the divertor heat flux and D-alpha emission. The calculations indicate that the reduction in divertor D-alpha emission with lithium coatings applied is consistent with a drop in recycling coefficient from R similar to 0.98 to R similar to 0.9. The change in recycling is not sufficient to account for the change in edge density profiles: interpretive modeling indicates similar transport coefficients within the edge transport barrier (D/chi(e) similar to 0.2/1.0 m(2)/s), but a widening of the barrier with lithium. (C) 2010 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Novel Charge Recycling Approach to Low-Power

A novel charge-recycling scheme has been designed and implemented to demonstrate the feasibility of operating digital circuits using the charge scavenged from the leakage and dynamic load currents inherent to digital logic. The proposed scheme uses capacitors to efficiently recover the ground-bound charge and to subsequently boost the capacitor voltage to power up the source circuit. This recycling methodology has been implemented on a 12-bit Gray-code counter within a 12-bit multichannel Wilkinson ADC. The circuit has been designed in 0.5 m BiCMOS and in 90nm CMOS processes. SPICE simulation results reveal a 46 53% average reduction in the energy consumption of the counter. The total energy savings including the control generation aggregates to an average of 26 34%.

99 GENERAL AND MISCELLANEOUS↗

Argonne explains nuclear recycling in 4 minutes

Currently, when using nuclear energy only about five percent of the uranium used in a fuel rod gets fissioned for energy; after that, the rods are taken out of the reactor and put into permanent storage. There is a way, however, to use almost all of the uranium in a fuel rod. Recycling used nuclear fuel could produce hundreds of years of energy from just the uranium we've already mined, all of it carbon-free. Problems with older technology put a halt to recycling used nuclear fuel in the United States, but new techniques developed by scientists at Argonne National Laboratory address many of those issues. For more information, visit http://www.anl.gov/energy/nuclear-energy.

25 ENERGY STORAGE↗

Distributed Wind Deployment: Triad Recycling and Energy Corporation

This is a case study on a distributed wind project. Located 1,500 feet from the Niagara River, near the decommissioned Huntley coal-fired power plant, Triad Recycling and Energy Corporation uses a distributed wind system to cost-effectively offset the power required by their energy intensive recycling equipment. Their location is ideal for distributed wind development because they are surrounded by brownfields that offer wide, open spaces with unobstructed winds.

case study↗

Effects of Lithium-ion Battery Recycling Wastes on Ammonia-Oxidizing Bacteria

Increased demand for lithium-ion batteries (LIB) necessitates development of effective recycling methods for critical battery materials. Oak Ridge National Laboratory (ORNL) is exploring membrane solvent extraction (MSX) for the hydrometallurgical recycling of LIB materials. In this study, waste from MSX was investigated for its impact on the ammonia-oxidizing organism, Nitrosomonas europaea—a model organism for nitrogen removal during wastewater treatment. It was found that Raffinate 4 from ORNL was inhibitory to the growth and nitrite production of N. europaea, likely due to its nickel content. Further investigation is currently underway.

99 GENERAL AND MISCELLANEOUS↗

Comparing Polymer Recycling Technologies for a Circular Plastic Economy

This presentation summarizes the research article "Technical, Economic, and Environmental Comparison of Closed-Loop Recycling Technologies for Common Plastics" by Uekert et al. (ACS Sustainable Chem. Eng., 2023) for a carpet industry audience. It covers the technical performance, environmental impacts, and costs of existing and emerging plastic recycling technologies, with a focus on those that are applicable to carpet materials such as polypropylene and polyester.

carpet↗

Waste Estimates for a Future Recycling Plant in the US Based Upon AREVA Operating Experience - 13206

Estimates of process and secondary wastes produced by a recycling plant built in the U.S., which is composed of a used nuclear fuel (UNF) reprocessing facility and a mixed oxide (MOX) fuel fabrication facility, are performed as part of a U.S. Department of Energy (DOE) sponsored study [1]. In this study, a set of common inputs, assumptions, and constraints were identified to allow for comparison of these wastes between different industrial teams. AREVA produced a model of a reprocessing facility, an associated fuel fabrication facility, and waste treatment facilities to develop the results for this study. These facilities were divided into a number of discrete functional areas for which inlet and outlet flow streams were clearly identified to allow for an accurate determination of the radionuclide balance throughout the facility and the waste streams. AREVA relied primarily on its decades of experience and feedback from its La Hague (reprocessing) and MELOX (MOX fuel fabrication) commercial operating facilities in France to support this assessment. However, to perform these estimates for a U.S. facility with different regulatory requirements and to take advantage of some technological advancements, such as in the potential treatment of off-gases, some deviations from this experience were necessary. A summary of AREVA's approach and results for the recycling of 800 metric tonnes of initial heavy metal (MTIHM) of LWR UNF per year into MOX fuel under the assumptions and constraints identified for this DOE study are presented. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison of REMIX vs. MOX fuel characteristics in multiple recycling in VVER reactor

Multiple recycling of regenerated uranium-plutonium fuel in thermal reactors of VVER-1000 type with high enriched uranium feeding (REMIX-fuel) gives a possibility to terminate the accumulation of spent nuclear fuels (SNF) and Pu and decrease the accumulation of irradiated uranium by an order of magnitude. Results of comparison of VVER-1000 nuclear fuel cycle characteristics vs different fuel types such as UOX, MOX and REMIX-fuel have been presented. REMIX fuel (Regenerated Mixture of U-, Pu oxides) is the mixture of plutonium and uranium extracted from SNF and refined from other actinides and fission products with the addition of enriched uranium to provide the power potential necessary. The savings in terms of uranium quantities and separation works in the nuclear energy system (NES) with reactors using REMIX-fuel compared to the NES with uranium-fuelled reactors are shown to be of about 30% and 8%, respectively. For the NES with thermal reactors partially loaded with MOX-fuel, the uranium and separation works saving of about 14% would be obtained. Production of neptunium and americium in reactors with REMIX-fuel in steady state increases by a factor 3, and production of curium - by 10 compared to the reactors with UOX-fuel. This increase of minor actinide buildup is owed to the multiple recycling of plutonium. It should be noted that in this case all fuel assemblies contain high-background plutonium, and their manufacturing involves an expensive technology. Besides, management of REMIX-fuel will require special protection measures even during the fresh fuel manufacturing phase. The above-said gives ground to state that the use of REMIX fuel would be questionable in economic aspect.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Discussion on the merits of deep borehole disposal, especially with recycling - 15389

With the continued global expansion of the nuclear industry, disposal of spent nuclear fuel (SNF) and high level waste (HLW) continues to be a largely unimplemented (but extensively studied) activity throughout the world and can continue to do so due to the safe practices of 'interim' SNF/used nuclear fuel (UNF) and HLW storage. However as the industry continues to operate and expand in both existing and new countries, the accumulated SNF/UNF and HLW will continue to grow in both quantity and locations across the globe; hence, requiring more effort to control and monitor. Countries with nuclear power programs, or are considering starting nuclear power programs, must consider the potential financial and the engineering burden associated with both the interim storage and the disposal of SNF/UNF and HLW produced by these programs: can the cost of disposal be reasonably captured in the cost of electricity produced from nuclear programs and are there suitable sites for disposal in their country, such as a mined-geologic site, for the expected accumulated quantity of SNF and HLW? Answering these questions may be particularly vexing for countries with small nuclear programs where establishing viable disposal sites for SNF and HLW and funding of the development of these sites may be a challenge. In an effort to establish an alternative to traditional, expensive, mined-geologic disposal sites, the deep borehole option has been (re-)considered by multiple countries and entities to be a relatively simple solution to disposal of SNF and HLW. However, disposal of SNF in deep boreholes must overcome several issues including: (1) limiting-sized borehole diameters; (2) limited ability for retrieval; and (3) potential hang-up issues associated with lowering longer (e.g., > 180 inches) canisters down into a deep borehole. Since most SNF is a resource when recycled (i.e., UNF) and to dispose of it in an irretrievable manner would be wasteful, a more optimal alternative that could overcome these issues and maximize the benefits of the UNF is to recycle the UNF and dispose of the resulting HLW into deep boreholes. The multiple and mutual benefits of this approach are elucidated in this paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗