Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Capture of volatile fission products: present status and future perspectives - 15680

The performance of some adsorbent materials for retention of volatile fission products has been assessed. Two different zeolites (Zeolite 4A and silver-coated mordenite) have been chosen owing to their known capacity to entrap cesium and iodine, respectively. To this purpose experiments have been made with a pilot plant termed OGATA (Off-Gas Treatment Apparatus), installed at ENEA laboratories. The tests have been carried out by heating the volatile species at 900 deg. C and passing them through zeolite pellets with the help of argon as carrier gas. The products arising from the interaction with the zeolites have been analyzed mainly by X-rays diffractometry and scanning electron microscopy. The general conclusion from these experiments is that the retention of volatile elements, like cesium and iodine, occurs through a simple adsorption mechanism, which confirms the need to improve the trapping capacity of these materials, especially in view of the final disposal. Moreover, a metal-organic framework (MOF-5), as representative of the new class of materials proposed as adsorbents for volatile radionuclides has been taken into account. The metal-organic frameworks are a sub-family of the nano-porous crystals, characterized by metal-oxygen cages connected by organic bridges which currently attract intensive interest for their excellent potential for storing and separating gases. The synthesis of MOF-5 has been made according to a novel method reported in the literature. FTIR, XRD and Raman spectra, as well as SEM-EDS and thermal gravimetric analysis performed on the synthesized product are perfectly in agreement with current data and reveal the crystal structure of the MOF-5. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, spectroscopic and magnetic investigation of the LiFe{sub 1-x}Mn{sub x}PO{sub 4} (x=0-0.18) solid solution

Different solid state and sol-gel preparations of undoped and Mn substituted cathode material LiFePO{sub 4} are investigated. Li{sub 3}PO{sub 4}, Fe{sub 2}P{sub 2}O{sub 7} and Li{sub 4}P{sub 2}O{sub 7} are detected and quantified by XRPD only in solid state synthesis. In addition, micro-Raman spectra reveal low amount of different iron oxides clusters. EPR data, combined with the results of magnetization measurements, evidence signals from Fe{sup 3+} ions in maghemite nanoclusters, and in Li{sub 3}Fe{sub 2}(PO{sub 4}){sub 3}. The sol-gel synthesis, showing the lowest amount of impurity phases, seems the most suitable to obtain a promising cathode material. The structural refinement gives new insights into the cation distribution of the Mn doped triphylite structure: (i) about 85% of Mn{sup 2+} ions substitutes Fe{sup 2+}, the remaining 15% being located on the Li site, thus suggesting a structural disorder also confirmed by EPR and micro-Raman results; (ii) Mn ions on the Li site are responsible for the observed slight cell volume expansion. - Graphical abstract: The combined use of different spectroscopic, structural and magnetic techniques has been successfully applied to characterize structure, cation distribution and physical properties of undoped and Mn substituted triphylite and to evaluate the impurity phases formation.

36 MATERIALS SCIENCE↗

Controlled growth of ZnO nanorods on textured silicon wafer and the application for highly effective and recyclable SERS substrate by decorating Ag nanoparticles

Highlights: • The growth behavior of ZnO nanorods (NRs) is studied on the textured Si wafer. • A new surface-enhanced Raman scattering (SERS) substrate has been achieved by assembling Ag nanoparticles onto the ZnO NRs. • The SERS substrate exhibits good performance in terms of high sensitivity, good reproducibility and recyclability. - Abstract: Based on the study of growth behavior of ZnO nanorods on the textured Si wafer, a new three-dimensional surface-enhanced Raman scattering substrate has been achieved by assembling Ag nanoparticles onto the ZnO nanorods to form a radial plasmonic nanostructure. It is found that the new substrate exhibits good performance in terms of high sensitivity and good reproducibility for surface-enhanced Raman scattering. The determined enhancement factor is in the order of 10{sup 7} and the Raman spectra exhibit the remarkable consistency with the deviation below 5.0%. Compared to the substrate fabricated with ZnO nanorod array on the flat Si wafer, the new substrates have the higher utility of excitation light. Meanwhile, the new substrate is demonstrated to be recyclable after the irradiation of ultraviolet light.

36 MATERIALS SCIENCE↗

A facile and scalable route to nano-crystallized kesterite Cu{sub 2}ZnSnS{sub 4} fibers via electrospinning/sulfurization

Detailed characterization of the microstructure and its properties have been done on the nanocrystallized CZTS nanofibers fabricated via electrospinning following sulfurization. The fiber growth mechanism is proposed to explain the spontaneous reaction and crystallization of CZTS, as confirmed by the thermodynamic calculations. - Abstract: In this work, we report facile route to quaternary kesterite Cu{sub 2}ZnSnS{sub 4} (CZTS) microfibers through electrospinning method. Precursor fibers are electrospun from the solution composed of Cu(CH{sub 3}COO){sub 2}, Zn(CH{sub 3}COO){sub 2{sup ,}} and SnCl{sub 4} as the solutes, ethylene glycol methyl ether as the solvent, and polyvinylpyrrolidone (PVP) as the plasticizer. CZTS fibers are obtained after annealing at 773 K for 40 min in a sulfur ambient. Characterization including scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Raman spectra, confirm the formation of single-phased, well-crystallized CZTS fibers, with a band gap of about 1.48 eV estimated from the optical absorption curve. In addition, the fiber growth mechanism is proposed to explain the spontaneous reaction and crystallization of CZTS, as confirmed by the thermodynamic calculations.

36 MATERIALS SCIENCE↗

Quantum confinement effects on charge-transfer between PbS quantum dots and 4-mercaptopyridine

We obtain the surface enhanced Raman spectra of 4-mercaptopyridine on lead sulfide (PbS) quantum dots as a function of nanoparticle size and excitation wavelength. The nanoparticle radii are selected to be less than the exciton Bohr radius of PbS, enabling the observation of quantum confinement effects on the spectrum. We utilize the variation of nontotally symmetric modes of both b{sub 1} and b{sub 2} symmetry as compared to the totally symmetric a{sub 1} modes to measure the degree of charge-transfer between the molecule and quantum dot. We find both size dependent and wavelength dependent resonances in the range of these measurements, and attribute them to charge-transfer resonances which are responsible for the Raman enhancement.

36 MATERIALS SCIENCE↗

Synthesis and characterization of porous structured ZnO thin film for dye sensitized solar cell applications

Zinc oxide (ZnO) and zinc oxide/eosin yellow (ZnO/EY) thin films were potentiostatically deposited onto fluorine doped tin oxide (FTO) glass substrate. Effect of eosin yellow dye on structural, morphological and optical properties was studied. X-ray diffraction patterns, micro Raman spectra and photoluminescence (PL) spectra reveal hexagonal wurtzite structure with less atomic defects in 101 plane orientation of the ZnO/EY film. Scanning electron microscopy (SEM) images show flower for ZnO and porous like structure for ZnO/EY thin film, respectively. DSSC was constructed and evaluated by measuring the current density verses voltage curve.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of TiN on gallium nitride grown using different deposition conditions and annealing

This study evaluates the thermal stability of different refractory metal nitrides used as Schottky electrodes on GaN. The results demonstrate that TiN, MoSiN, and MoN possess good rectification and adhesion strength, with barrier heights of 0.56, 0.54, and 0.36 eV, respectively. After thermal treatment at 850 °C for 1 min, the TiN and MoN electrodes still exhibit rectifying characteristics, while the MoSiN degrades to an ohmic-like contact. For further study, several TiN films are deposited using different N{sub 2}/Ar reactive/inert sputtering gas ratios, thereby varying the nitrogen content present in the sputtering gas. Ohmic-like contact is observed with the pure Ti contact film, and Schottky characteristics are observed with the samples possessing nitrogen in the film. The average Schottky barrier height is about 0.5 eV and remains virtually constant with varying nitrogen deposition content. After examining Raman spectra and x-ray photoelectron spectroscopy results, the increase in the film resistivity after thermal treatment is attributed to oxidation and/or nitridation. Films deposited with a medium (40% and 60%) nitrogen content show the best film quality and thermal stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser annealing induced ferromagnetism in SrTiO{sub 3} single crystal

The appearance of ferromagnetic order up to 400 K upon KrF (248 nm) laser irradiation is reported in un-doped SrTiO{sub 3} (STO) single crystal. The high resolution x-ray photo emission spectroscopy (XPS) measurements reveal a strong shift of Sr-, Ti-, and O-related peaks. X-ray diffraction of laser annealed STO does not reveal a signature of either secondary magnetic or amorphous phases. 300 K X-band (∼9.543 GHz) angle-dependent electron paramagnetic resonance (EPR) measurements showed no evidence of additional magnetic peaks upon laser irradiation. XPS and EPR data did not provide a strong evidence of Ti{sup 3+} formation upon laser annealing. No differences in the visible 300 K Raman spectra of pristine and laser annealed STO are noticed. Interestingly, the magnetic moment is decreased by almost 10-fold upon oxygen annealing of laser annealed STO, inferring that oxygen vacancies play an important role in establishing the observed ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective probe of the morphology and local vibrations at carbon nanoasperities

We introduce a way to selectively probe local vibration modes at nanostructured asperities such as tips of carbon nanohorns. Our observations benefit from signal amplification in surface-enhanced Raman scattering (SERS) at sites near a silver surface. We observe nanohorn tip vibration modes in the range 200-500 cm{sup -1}, which are obscured in regular Raman spectra. Ab initio density functional calculations assign modes in this frequency range to local vibrations at the nanohorn cap resembling the radial breathing mode of fullerenes. Careful interpretation of our SERS spectra indicates presence of caps with 5 or 6 pentagons, which are chemically the most active sites. Changes in the peak intensities and frequencies with time indicate that exposure to laser irradiation may cause structural rearrangements at the cap.

36 MATERIALS SCIENCE↗

Influence of the voltage waveform during nanocomposite layer deposition by aerosol-assisted atmospheric pressure Townsend discharge

This work examines the growth dynamics of TiO{sub 2}-SiO{sub 2} nanocomposite coatings in plane-to-plane Dielectric Barrier Discharges (DBDs) at atmospheric pressure operated in a Townsend regime using nebulized TiO{sub 2} colloidal suspension in hexamethyldisiloxane as the growth precursors. For low-frequency (LF) sinusoidal voltages applied to the DBD cell, with voltage amplitudes lower than the one required for discharge breakdown, Scanning Electron Microscopy of silicon substrates placed on the bottom DBD electrode reveals significant deposition of TiO{sub 2} nanoparticles (NPs) close to the discharge entrance. On the other hand, at higher frequencies (HF), the number of TiO{sub 2} NPs deposited strongly decreases due to their “trapping” in the oscillating voltage and their transport along the gas flow lines. Based on these findings, a combined LF-HF voltage waveform is proposed and used to achieve significant and spatially uniform deposition of TiO{sub 2} NPs across the whole substrate surface. For higher voltage amplitudes, in the presence of hexamethyldisiloxane and nitrous oxide for plasma-enhanced chemical vapor deposition of inorganic layers, it is found that TiO{sub 2} NPs become fully embedded into a silica-like matrix. Similar Raman spectra are obtained for as-prepared TiO{sub 2} NPs and for nanocomposite TiO{sub 2}-SiO{sub 2} coating, suggesting that plasma exposure does not significantly alter the crystalline structure of the TiO{sub 2} NPs injected into the discharge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic and Structural Studies in Co- and Mn-implanted SrTiO3 Single Crystals

Micro Raman and static magnetization data on manganese or cobalt-implanted (at 3 or 5 at.%) strontium titanate (Mn,Co):SrTiO3 single crystals are presented. Micro Raman results reveal a cubic perovskite structure at 300 K with no evidence of any secondary phase. All samples show ferromagnetism both at 300 K and at 10 K. Moreover, micro Raman spectra at low temperature reveal the presence of polar ordering, which allow to consider the investigated materials as possible host matrices for multiferroic phenomena. Obtained results are discussed in connection to supplementary outcomes derived by content, optical absorption and electron paramagnetic resonance (EPR) measurements.

36 MATERIALS SCIENCE↗

Effect of nonmagnetic alkaline-earth dopants on magnetic properties of BiFeO{sub 3} thin films

Bi{sub 0.95}A{sub 0.05}FeO{sub 3} (A = Ba, Sr, Ca) thin films were deposited on (111) Pt/Ti/SiO{sub 2}/Si substrates via chemical solution deposition. The magnetization of the doped specimens increases sharply as compared to that of pure BiFeO{sub 3}, and it increases as the doped ionic radius gets larger. X-ray diffraction analysis reveals that the films are single phase, and no other extra magnetic phases are detected. X-ray photoelectron spectroscopy analysis suggests that the content of Fe{sup 3+} increases and that that of Fe{sup 2+} decreases. According to the x-ray diffraction and Raman analyses, there are corresponding changes in the lattice parameters and the Raman spectra as the doped ionic radius gets larger. These results indicate that neither the magnetic coupling of Fe{sup 2+} nor the parasitic magnetic phases could be the origin of the magnetization improvement, and we consider that the magnetization improvement mainly originates from the doped ionic radius size effect.

36 MATERIALS SCIENCE↗

Direct growth of nano-crystalline graphite films using pulsed laser deposition with in-situ monitoring based on reflection high-energy electron diffraction technique

We report an experimental method to overcome the long processing time required for fabricating graphite films by a transfer process from a catalytic layer to a substrate, as well as our study of the growth process of graphite films using a pulsed laser deposition combined with in-situ monitoring based on reflection high-energy electron diffraction technique. We monitored the structural evolution of nano-crystalline graphite films directly grown on AlN-coated Si substrates without any catalytic layer. We found that the carbon films grown for less than 600 s cannot manifest the graphite structure due to a high defect density arising from grain boundaries; however, the carbon film can gradually become a nano-crystalline graphite film with a thickness of approximately up to 5 nm. The Raman spectra and electrical properties of carbon films indicate that the nano-crystalline graphite films can be fabricated, even at the growth temperature as low as 850 °C within 600 s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth and characterization of the nonlinear optical single crystal: L-Lysinium trifluoroacetate

A novel organic nonlinear optical (NLO) crystal, L-lysinium trifluoroacetate (with the molecular formula as (H{sub 3}N){sup +}CH{sub 2}CH{sub 2}CH{sub 2}CH{sub 2}CH(H{sub 3}N){sup +}COO{sup -}{center_dot}CF{sub 3}COO{sup -}), was grown by the controlled evaporation of its aqueous solution. The X-ray powder diffraction was used to determine its cell parameters. The calculated results based on the diffraction data reveal that L-lysinium trifluoroacetate belongs to the monoclinic crystallographic system, space group P2{sub 1}, with cell parameters: a = 5.698(5), b = 23.542(8), c = 8.500(6) A, {beta} = 91.62(9) deg., V = 1139.96 A{sup 3}. The grown crystals were characterized by the elemental analyses, Fourier transform infrared and Raman spectra. Experiments of thermogravimetric (TG) and differential thermal analysis (DTA) were carried out to study its thermal properties. The optical behaviours, including transmission spectrum and second harmonic generation (SHG), were investigated to study its linear and nonlinear optical properties. Optical nonlinearities were analyzed and discussed involved with its crystal structure.

36 MATERIALS SCIENCE↗

Nanodiamonds with SiV colour centres for quantum technologies

Properties of silicon-vacancy (SiV) colour centres in ultra-nanosize diamonds are studied. Nanodiamonds are obtained at a high temperature and pressure, which induced transformations in mixtures of organic and hetero-organic compounds without metal-catalysts. The size distribution of grown nanodiamonds is determined by the methods of transmission electron microscopy and atomic-force microscopy, as well as by using the model of phonon spatial localisation. In addition, Raman spectra of various nanodiamonds and luminescence properties of SiV-centres are investigated. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron beam exposure mechanisms in hydrogen silsesquioxane investigated by vibrational spectroscopy and in-situ electron beam induced desorption

Hydrogen Silsesquioxane (HSQ) is used as a high-resolution resist with resolution down below 10nm half-pitch. This material or materials with related functionalities could have widespread impact in nanolithography and nanoscience applications if the exposure mechanism was understood and instabilities controlled. Here we have directly investigated the exposure mechanism using vibrational spectroscopy (both Raman and Fourier transform Infrared) and electron beam desorption spectrocscopy (EBDS). In the non-networked HSQ system, silicon atoms sit at the corners of a cubic structure. Each silicon is bonded to a hydrogen atom and bridges 3 oxygen atoms (formula: HSiO3/2). For the first time, we have shown, via changes in the Si-H2 peak at ~;;2200 cm -1 in the Raman spectra and the release of SiHx products in EBID, that electron-bam exposed materials crosslinks via a redistribution reaction. In addition, we observe the release of significantly more H2 than SiH2 during EBID, which is indicative of additional reaction mechanisms. Additionally, we compare the behavior of HSQ in response to both thermal and electron-beam induced reactions.

36 MATERIALS SCIENCE↗

Growth and characterization of kesterite Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} crystals for photovoltaic applications

Highlights: • Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} crystals were grown using vertical gradient freeze technique. • Grown CZTSSe crystals exhibited highly crystalline tetragonal kesterite structure. • Grown ingot showed a homogeneous, stoichiometric composition along the growth axis. • Cu-rich particulates were observed along the polycrystalline grain boundaries. • Large volume of high quality CZTSSe can be grown using this novel VGF method. - Abstract: Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} (CZTSSe) bulk crystals have been grown for the first time, in multi-gram quantities, using a novel vertical gradient freeze (VGF) technique. Large grain polycrystalline CZTSSe ingot with grain sizes ∼0.2–0.5 mm was grown in a vacuum sealed quartz ampoule. Structural, compositional, and electronic properties of the ingot were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), and van der Pauw measurements. XRD analysis showed highly crystalline tetragonal structure corresponding to kesterite CZTSSe with lattice constants of a = 5.563 Å, and c = 11.09 Å (c/2a = 0.997) and Raman spectra confirmed the formation of single phase CZTSSe. High-resolution XPS spectra confirmed the formation of metal-sulfoselenides. The ingot along the growth axis showed a homogeneous near stoichiometric elemental distribution corresponding to Cu/(Zn + Sn) = 0.94 and Zn/Sn = 0.98. EDS mapping on the ingot's outer surface revealed formation of islanded Cu-rich droplets at the grain boundaries. Grown crystals exhibited p-type conductivity with a measured bulk resistivity of ∼51 Ω cm.

36 MATERIALS SCIENCE↗

Synthesis and characterization of CoFe{sub 2}O{sub 4} nanoparticles with high coercivity

Single crystalline CoFe{sub 2}O{sub 4} nanoparticles with high coercivity were prepared via a one-step hydrothermal method. The shape and size of the nanocrystals (in the range of 20–100 nm) can be controlled by varying synthesis parameters such as the concentration of NaOH and CTAB. X-ray diffraction and Raman spectra analysis confirmed that all the as-synthesized nanoparticles have a face centered cubic spinel crystal structure. HRTEM observation of particles shows interlayer spacing 0.48 nm of (111) lattice planes. A coercive force up to 5.0 kOe and saturation magnetization of 73 emu/g was achieved at room temperature for the 40 nm CoFe{sub 2}O{sub 4} nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗