The /D/ matrix for multicomponent diffusion
Multicomponent diffusion process calculation using eigenvalues of Onsager diffusion matrix
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Multicomponent diffusion process calculation using eigenvalues of Onsager diffusion matrix
In theories of numerical stability, roots to a characteristic polynomial are sought, which, in the case of the predictor with iterative correction method of numerical integration, are eigenvalues of a matrix whose elements depend on the coefficients used in the integration process. The characteristic polynomial is displayed explicitly in terms of the elements of the characteristic matrix.
An expression is developed that makes possible the prediction of Poisson's ratio for unidirectional composites with reference to any pair of orthogonal axes that are normal to the direction of the reinforcing fibers. This prediction appears to be a reasonable one in that it follows the trends of the finite element analysis and the bounding estimates, and has the correct limiting value for zero fiber content. It can only be expected to apply to composites containing stiff, circular, isotropic fibers bonded to a soft matrix material.
Various forms of potassium titanate were found to have almost complete resistance to chemical attack in 45 wt % KOH at 150 C (423 K) for up to 9600 hours. Electron microscopy and X-ray diffraction disclosed important differences with respect to fibricity and stability. The octatitanate appeared to possess the best combination of properties. It was concluded that potassium titanate could be produced in a more asbestos-like form. Fiber dispersion is important in matrix manufacture.
It is demonstrated by means of rigorous simulations with an operational software system that multilateration of the GEOS-3 satellite is possible. This operation, i.e., the processing of simultaneous range measurements from the satellite to a real world constellation of stations using strictly geometric reduction of the observables, will result in the determination of the interstation coordinates to accuracies approaching those of the data measurements obtained at the stations. The satellite-to-satellite link between the GEOS-3 and ATS-6 can be used to further enhance the station covariance matrix.
An approach to the solution of matrix problems resulting from integral equations of mathematical physics is presented. Based on the inherent smoothness in such equations, the problem is reformulated using a set of orthogonal basis vectors, leading to an equivalent coefficient problem which can be of lower order without significantly impairing the accuracy of the solution. This approach was evaluated using a two-dimensional Neumann problem describing the inviscid, incompressible flow over an airfoil. Two different kinds of mode functions were investigated, namely eigenfunction series and Fourier series. The method using Fourier series was found preferable. It uses all of the coefficients from a Fast Fourier Transform algorithm in an approximate method which exploits the known structure of the transformed coefficient matrix and very promising results for the flow over a realistic airfoil are obtained. On the basis of the results presented here, an order of magnitude reduction in this computer time can be expected for such problems as compared with the time for a direct matrix solution.
The Shuttle Orbiter communications equipment includes phase modulation (PM) and frequency modulation (FM) channels. The PM section has the capability of routing high levels of energy (175 W) from any one of four transmitters to any one of four antennas, mutually exclusive. The FM channel uses a maximum of 15-W power routed from either of two transmitters to one of two antennas, mutually exclusive. The paper describes the design and the theory of a logic-controlled RF switch matrix devised for the purposes cited. Both PM and FM channels are computer-controlled with manual overrides. The logic interface is realized with CMOS logic for low power consumption and high noise immunity. The interior of the switch matrix is maintained at a pressure of 15 psi (90% nitrogen, 10% helium) by an electron beam-welded encapsulation. The computational results confirm the viability of the RF switch matrix concept.
Phase equilibrium and dynamic crystallization experiments using a synthetic analog of the 77115 matrix composition restrict interpretations of the thermal history of the lunar sample. Rapid early cooling (10-25 G/hr) of melt containing a large number of a nuclei and slow late stage cooling (less than 7 C/hr) are required to crystallize the textures and mineralogy of the 77115 matrix. This result is in agreement with that predicated by the nature and extent of diffusive cation exchange between various xenocrysts phases and the 77115 matrix.
The graphite-magnetite component has been found (1) as abundant isolated inclusions in eight ordinary-chondritic, regolith breccias; (2) as the sole matrix in a new kind of unequilibrated chondrite that forms clasts in these regolith breccias; and (3) together with a Huss matrix in six unequilibrated ordinary chondrites. It is suggested that the component was formed by low-temperature, gas-solid reactions before the accretion of the meteorite, and that the isolated inclusions of graphite-magnetite in regolith breccias were derived from bodies composed of the new kind of chondrite that has graphite-magnetite as its sole matrix.
Latest public release of NASTRAN, April 1982 most efficient and versatile to date. Intended range of applications of NASTRAN includes almost every kind of structure and construction. Users may develop their own analysis capabilities by using Direct Matrix Abstraction Programming (DMAP) language to direct NASTRAN in solution of general matrix problems.
Axial, low cycle fatigue properties of 25 and 44 fiber vol pct SiC/Ti(6Al-4V) composites, measured at 650 C, were compared with the fatigue properties of unreinforced Ti(6Al-4V) at the same temperature. A prior study of the fatigue behavior of this composite system at room temperature indicated that the SiC fiber reinforcement did not provide the anticipated improvement of fatigue resistance of this alloy. At 650 C, the composite fatigue properties degraded somewhat from those at room temperature. However, these properties degraded more for the unreinforced matrix at 650 C with the result that the composite fatigue strength was two to three times the fatigue strength of the matrix alloy. The reasons for this reversal are discussed in terms of crack initiation at broken fibers and residual matrix stresses.
A multihundred kilowatt Regenerative Fuel Cell for use in a space station is envisioned. Three 0.508 sq ft (471.9 cm) active area multicell stacks were assembled and endurance tested. The long term performance stability of the platinum on carbon catalyst configuration suitability of the lightweight graphite electrolyte reservoir plate, the stability of the free standing butyl bonded potassium titanate matrix structure, and the long life potential of a hybrid polysulfone cell edge frame construction were demonstrated. A 18,000 hour demonstration test of multicell stack to a continuous cyclical load profile was conducted. A total of 12,000 cycles was completed, confirming the ability of the alkaline fuel cell to operate to a load profile simulating Regenerative Fuel Cell operation. An orbiter production hydrogen recirculation pump employed in support of the cyclical load profile test completed 13,000 hours of maintenance free operation. Laboratory endurance tests demonstrated the suitability of the butyl bonded potassium matrix, perforated nickel foil electrode substrates, and carbon ribbed substrate anode for use in the alkaline fuel cell. Corrosion testing of materials at 250 F (121.1 C) in 42% wgt. potassium identified ceria, zirconia, strontium titanate, strontium zirconate and lithium cobaltate as candidate matrix materials.
The process that was used in the molding of an advanced composite outer by-pass duct planned for the F404 engine is discussed. This duct was developed as a potential replacement for the existing titanium duct in order to reduce both the weight and cost of the duct. The composite duct is now going into the manufacturing technology portion of the program. The duct is fabricated using graphite cloth impregnated with the PMR-15 matrix system.
An electron microscopy study has been carried out to characterize the microstructure of a sintered Gd-Ba-Cu-O superconductor alloy. The GdBa2Cu3O(7-x) phase in the oxygen annealed sample is orthorhombic, while in the vacuum annealed sample it is tetragonal. It is shown that the details of the fine structure in the 001-line zone axis convergent beam patterns can be used to distinguish between the orthorhombic form and the tetragonal form. In addition to this matrix phase, an amorphous phase is frequently observed at the triple grain junctions. Gd-rich inclusions have been observed inside the matrix phase.
The main goal was to measure the elevated temperature tensile and creep properties of a SiC fiber-reinforced titanium metal matrix composite.
A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.
To date, only 180 particle impact tracks from Wild 2 have been extracted from the Stardust aerogel collector and even fewer have been thoroughly characterized. In order to provide a cohesive compositional dataset that can be compared to the meteorite record, we have made both major and minor element analyses (TEM/EDXS) of olivine and low-Ca pyroxene for 39 particles harvested from 26 tracks. However, the dearth of equivalent analyses for these phases in chondrite matrix hinders their comparison to the Wild 2 samples. To properly permit comparison of chondritic olivine and pyroxene to the Wild 2 samples, we have also provided a large, comprehensive EPMA dataset (greater than10(exp 3) analyses) of analogous grains (5-30 micrometers) isolated in L/LL3.0-4, CI, CM, CR, CH, CO, CV, Acfer 094, EH3, EL6, and Kakangari matrix
Carbon is a major molecular constituent of primitive chondrites of low petrologic grade. A majority of the carbon (>70%) is in the insoluble organic matter (IOM) fraction that cannot be extracted from the meteorite sample using polar or nonpolar solvents. The IOM is comprised of a kerogen-like macromolecular carbon (MMC) structure that consists of aromatic rings connected by highly branching aliphatic chains. Raman spectroscopy is highly sensitive to IOM due to a strong resonance enhancement that occurs for all visible excitation wavelengths, making Raman a powerful in-situ probe of IOM. The Raman spectrum of IOM consists of two primary bands, the G band originates from all carbon-carbon bonds in the MMC structure and the D band that originates from carbon 6-member ring breathing motions. The peak position and width of the G and D bands probe the structure of the IOM. Using Raman spectroscopy, the IOM structure has been shown to correlate with the thermal alteration history of the meteorite, allowing for petrologic grade classification to the tenths place in the 3.0-3.9 range. Here, we have collected Raman images of GRA 06100,41 (CR2) for the examination of the IOM spatial distribution and observe significant differences between the IOM in the matrix and chondrules.