Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process based assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The Landsat-D responsiveness to user community needs

Initial examinations of the Landsat-4 Multispectral Scanner and Thematic Mapper (IM) imagery indicate that these systems and the ground-based data processing systems are performing well. A combination of the spatial resolution of the multispectral scanner with the four band (0.5-0.6, 0.6-0.7, 0.7-0.8, and 0.8-1.1 microns) multispectral capability provides a useful observation technique for identifying crop type, phenological state of development, and a real condition assessment. Landsat multispectral scanner imagery has become more important in the search for new deposits of oil and mineral resources, and geological applications indicate that image analysis complements geological mapping techniques. Advantages of the TM include more precise measurements of the increased reflectance of vegetation in the green and near infrared. In addition, TM has improvement vegetation species differentiation, due to measurements made in new spectral bands. Preliminary TM data analysis reveals that systems have performed to optimum expectations.

Salomonson, V. V.↗
NASA NTRS1992

Microgravity effects on standardized cognitive performance measures

The purpose of this experiment, selected to fly on the International Microgravity Laboratory (IML-2) Spacelab mission, is to determine the effects of microgravity upon the cognitive skills which are critical to successful performance of many tasks on board the Space Shuttle. Six tests from the Unified Tri-service Cognitive Performance Assessment Battery (UTC-PAB) will be administered to the Mission Specialists to fulfill the goals of this experiment. These tests are based upon current theoretical models of human performance and the hypothesized effects of microgravity. The principle objective is the identification of the effects of microgravity upon specific information processing skills affecting performance from those of fatigue and shifts in work/rest cycles. Multiple measures of both short and long term fatigue will be obtained and used as a major independent variable for the analysis of these performance data. Scientific supporting studies will determine optimum practice and performance testing schedules for the astronauts. The same tests will be used post-flight to collect data on the recovery of any cognitive performance impairment compared with pre-flight, baseline levels.

Schiflett, Samuel G.↗
NASA NTRS1998

Thermographic Inspection of Metallic Honeycomb Sandwich Structures

The X-33/VentureStar has a Thermal Protection System (TPS) consisting mainly of brazed metallic honeycomb sandwich structures. Inspection of these structures is changing as a result of the extremely thin (less than 200 microns) skins, the small critical defect size (less than 2 mm long by 100 microns wide) and the large number (more than 1000) of parts to be inspected. Pulsed Infrared Thermography has been determined to be the most appropriate inspection method for manufacturing inspection based on performance comparison with other methods, cost, schedule and other factors. The results of the assessment of the different methods will be summarized and data on the performance of the final production inspection system will be given. Finite difference thermal methods have been used to model the whole inspection process. Details of correlation between the models and experimental data will be given and data on the use of pulsed infrared thermography on other metallic honeycomb sandwich structures will be given.

Taylor, John O.↗
NASA NTRS2004

Software for Probabilistic Risk Reduction

A computer program implements a methodology, denoted probabilistic risk reduction, that is intended to aid in planning the development of complex software and/or hardware systems. This methodology integrates two complementary prior methodologies: (1) that of probabilistic risk assessment and (2) a risk-based planning methodology, implemented in a prior computer program known as Defect Detection and Prevention (DDP), in which multiple requirements and the beneficial effects of risk-mitigation actions are taken into account. The present methodology and the software are able to accommodate both process knowledge (notably of the efficacy of development practices) and product knowledge (notably of the logical structure of a system, the development of which one seeks to plan). Estimates of the costs and benefits of a planned development can be derived. Functional and non-functional aspects of software can be taken into account, and trades made among them. It becomes possible to optimize the planning process in the sense that it becomes possible to select the best suite of process steps and design choices to maximize the expectation of success while remaining within budget.

Hensley, Scott↗
NASA NTRS2014

Distillation Brine Purification for Resource Recovery Applications

Wastewater processing systems for space generate residual brine that contains water and salts that could be recovered to life support consumables. The project assessed the use of ion-exchange resins to selectively remove salts from wastewater treatment brines. The resins were then regenerated for additional use. The intention would be to generate a Na/K and CI rich or purified brine that would then be processed into high value chemicals, such as acids, bases, and/or bleach.

System↗
NASA NTRS2014

Cart3D Simulations for the First AIAA Sonic Boom Prediction Workshop

Simulation results for the First AIAA Sonic Boom Prediction Workshop (LBW1) are presented using an inviscid, embedded-boundary Cartesian mesh method. The method employs adjoint-based error estimation and adaptive meshing to automatically determine resolution requirements of the computational domain. Results are presented for both mandatory and optional test cases. These include an axisymmetric body of revolution, a 69deg delta wing model and a complete model of the Lockheed N+2 supersonic tri-jet with V-tail and flow through nacelles. In addition to formal mesh refinement studies and examination of the adjoint-based error estimates, mesh convergence is assessed by presenting simulation results for meshes at several resolutions which are comparable in size to the unstructured grids distributed by the workshop organizers. Data provided includes both the pressure signals required by the workshop and information on code performance in both memory and processing time. Various enhanced techniques offering improved simulation efficiency will be demonstrated and discussed.

Predictions↗
NASA NTRS2012

Design of Accumulators and Liquid/Gas Charging of Single Phase Mechanically Pumped Fluid Loop Heat Rejection Systems

For single phase mechanically pumped fluid loops used for thermal control of spacecraft, a gas charged accumulator is typically used to modulate pressures within the loop. This is needed to accommodate changes in the working fluid volume due to changes in the operating temperatures as the spacecraft encounters varying thermal environments during its mission. Overall, the three key requirements on the accumulator to maintain an appropriate pressure range throughout the mission are: accommodation of the volume change of the fluid due to temperature changes, avoidance of pump cavitation and prevention of boiling in the liquid. The sizing and design of such an accumulator requires very careful and accurate accounting of temperature distribution within each element of the working fluid for the entire range of conditions expected, accurate knowledge of volume of each fluid element, assessment of corresponding pressures needed to avoid boiling in the liquid, as well as the pressures needed to avoid cavitation in the pump. The appropriate liquid and accumulator strokes required to accommodate the liquid volume change, as well as the appropriate gas volumes, require proper sizing to ensure that the correct pressure range is maintained during the mission. Additionally, a very careful assessment of the process for charging both the gas side and the liquid side of the accumulator is required to properly position the bellows and pressurize the system to a level commensurate with requirements. To achieve the accurate sizing of the accumulator and the charging of the system, sophisticated EXCEL based spreadsheets were developed to rapidly come up with an accumulator design and the corresponding charging parameters. These spreadsheets have proven to be computationally fast and accurate tools for this purpose. This paper will describe the entire process of designing and charging the system, using a case study of the Mars Science Laboratory (MSL) fluid loops, which is en route to Mars for an August 2012 landing.

HRS↗
NASA NTRS2019

Web-based Decision Support System Tools: the Soil and Water Assessment Tool Online Visualization and Analyses (SWATOnline) and NASA Earth Observation Data Downloading and Reformatting Tool (NASAaccess)

The current influx of climate related information required scientists to communicate their findings to decision makers in governments, disaster preparedness organizations, and the general public. The Soil and Water Assessment Tool (SWAT) is a powerful modelling tool that allows scientists to simulate many of the physical processes involved in the water cycle. This article presents the design, methods and development efforts to overcome some of the limitations of the previously developed SWAT visualization software programs by creating a set of modular web applications that can be duplicated, customized, and run. Moreover, this article features a web application development tool for climate data retrieval. The NASAaccess fetches, extracts and reformats climate data from the National Aeronautics and Space Administration servers and outputs data compatible with hydrological models. This work has the potential to increase the SWAT's model impact on non-technically trained stakeholders and decision makers charged with water and climate management.

Tethys↗
NASA NTRS2019

Aircraft Conceptual Structural Design Using the AMMIT Structural Analysis Tool

Aircraft conceptual structural design is the process of developing and refining an idea for an aircraft into a feasible structural design. The process typically involves multiple evaluations of a single configuration and can require designers to examine thousands of concepts. Standard approaches to conducting structural analyses in this phase are either based on the use of historical or empirical data or often require significant expertise in structural analysis to perform these rapid assessments. The AMMIT structural analysis tool includes structural line models and handbook methods wrapped in a simple to use interface that can enable rapid, physics-based structural designs without requiring extensive structural expertise. The objectives of the present paper are to introduce AMMIT, describe the methods used in AMMIT, and present the results of the validation effort. Validation of the AMMIT methodology was performed on nine aircraft to determine the accuracy of the methods, highlight features of AMMIT, and guide future development of the methodology. Results of the validation effort indicated that AMMIT provides a prediction of primary structural weight for each aircraft with an acceptable level of error during the preliminary design phase with a minimal expenditure of computational resources.

Horvath, Bryce L.↗
NASA NTRS2021

Breakdown in Tantalum Capacitors

Failures in tantalum capacitors can be considered as a time-dependent-breakdown and reliability of all types of capacitors, including wet, MnO2 and polymer cathode parts, depends on the efficiency of self-healing that can mend parts after breakdown. A mechanism of self-healing in MnO2 capacitors is associated with oxygen reduction in the cathode layer and isolation of the breakdown site with high-resistive Mn2O3/Mn3O4 compositions. Although this mechanism is commonly accepted, details of self-healing have not been analyzed sufficiently yet, and the effects of scintillations on behavior of the parts has not been fully understood. There is a lack of data on the self-healing efficiency in different lots of capacitors. Even less is known about self-healing in polymer tantalum capacitors. In this work, different types of polymer and MnO2 capacitors have been tested for scintillation breakdown using a constant current stress (CCS) technique modified to allow detection of the amplitudes and durations of current spikes during breakdown. Characteristics of the parts and in particular leakage currents were measured to assess the efficiency of self-healing and improve screening processes for tantalum capacitors. Damaged sites were localized using infrared camera and their appearance analyzed after deprocessing and crosssectioning. Thermal effects during scintillations have been modeled, self-healing processes in polymer and MnO2 cathode capacitors discussed, and mechanisms of breakdown based on the growth of conductive filaments in the dielectric suggested.

tantalum polymer capacitors↗
NASA NTRS2016

Stratospheric Aerosol--Observations, Processes, and Impact on Climate

Interest in stratospheric aerosol and its role in climate have increased over the last decade due to the observed increase in stratospheric aerosol since 2000 and the potential for changes in the sulfur cycle induced by climate change. This review provides an overview about the advances in stratospheric aerosol research since the last comprehensive assessment of stratospheric aerosol was published in 2006. A crucial development since 2006 is the substantial improvement in the agreement between in situ and space-based inferences of stratospheric aerosol properties during volcanically quiescent periods. Furthermore, new measurement systems and techniques, both in situ and space based, have been developed for measuring physical aerosol properties with greater accuracy and for characterizing aerosol composition. However, these changes induce challenges to constructing a long-term stratospheric aerosol climatology. Currently, changes in stratospheric aerosol levels less than 20% cannot be confidently quantified. The volcanic signals tend to mask any nonvolcanically driven change, making them difficult to understand. While the role of carbonyl sulfide as a substantial and relatively constant source of stratospheric sulfur has been confirmed by new observations and model simulations, large uncertainties remain with respect to the contribution from anthropogenic sulfur dioxide emissions. New evidence has been provided that stratospheric aerosol can also contain small amounts of nonsulfatematter such as black carbon and organics. Chemistry-climate models have substantially increased in quantity and sophistication. In many models the implementation of stratospheric aerosol processes is coupled to radiation and/or stratospheric chemistry modules to account for relevant feedback processes.

Kresmer, Stefanie↗
NASA NTRS1976

OAST Space Theme Workshop. Volume 3: Working group summary. 4: Software (E-4). A. Summary. B. Technology needs (form 1). C. Priority assessment (form 2)

Only a few efforts are currently underway to develop an adequate technology base for the various themes. Particular attention must be given to software commonality and evolutionary capability, to increased system integrity and autonomy; and to improved communications among the program users, the program developers, and the programs themselves. There is a need for quantum improvement in software development methods and increasing the awareness of software by all concerned. Major thrusts identified include: (1) data and systems management; (2) software technology for autonomous systems; (3) technology and methods for improving the software development process; (4) advances related to systems of software elements including their architecture, their attributes as systems, and their interfaces with users and other systems; and (5) applications of software including both the basic algorithms used in a number of applications and the software specific to a particular theme or discipline area. The impact of each theme on software is assessed.

Source record↗
NASA NTRSDate not supplied

Can Resilience Assessments Inform Early Design Human Factors Decision-making?

There is a growing call among researchers for tighter coupling between human factors and human reliability assessments. In this research, we explore if early design stage resilience assessments can help bridge some of the gaps between human factors and human reliability assessments. Resilience in systems is their ability to recover reasonably and operate within acceptable bounds during failures and unexpected events. The fmdtools toolkit allows designers to assess the resilience of a system by modeling the human error and machine-related failure propagation in both nominal and faulty scenarios during the early design stages. As a result, the fmdtools toolkit has a low-fidelity dynamic human reliability assessment component built into it. In this paper, we study if the results from the fmdtools simulations can help inform and prioritize human factors design decision-making, resulting in tighter coupling between human factors and human reliability assessments during the design process. Specifically, we explore the results from a rover design example to understand the types of information that can help guide human factor-related decision-making.

Resilience-based Design↗
NASA NTRS1993

The Test Analysis Retrieval System (TARS): Meeting the challenges of the network's test processes

The Networks Systems Test Section (GSFC 531.4) is responsible for managing a variety of engineering and operational tests used to assess the status of the Network elements relative to readiness certification for new and ongoing mission support and for performance trending. To conduct analysis of data collected during these tests, to disseminate and share the information, and to catalog and create reports based on the analysis is currently a cumbersome and inefficient task due primarily to the manual handling of paper products and the inability to easily exchange information between the various Networks elements. The Test Analysis and Retrieval System (TARS) is being implemented to promote concise data analysis, intelligible reporting of test results, to minimize test duplication by fostering a broad sharing of test data, and perhaps most importantly, to provide significantly improved response to the Network's internal and external customers. This paper outlines the intended application, architecture, and benefits of the TARS.

Stelmaszek, Robert L.↗
NASA NTRS1979

Research needs in aerospace structural dynamics

The perspective of a NASA Ad Hoc Study Committee on future research needs in structural dynamics within the aerospace industry is presented. It identifies the common aspects of the design process across the industry and establishes the role of structural dynamics in it through a discussion of various design considerations having their basis in structural dynamics. The specific structural dynamics issues involved in these considerations are identified and assessed as to their current technological status and trends. Projections of future requirements based on this assessment are made and areas of research to meet them are identified.

Amos, A. K.↗
NASA NTRS1985

A modeling analysis program for the JPL Table Mountain Io sodium cloud data

The necessary personnel software base was established to accomplish the data processing requirements for this project. Conversion of software required in reformatting the raw Io sodium cloud data was completed and data processing activities were initiated. Slit spectra data acquired by the JPL Table Mountain Io sodium cloud observing program were reviewed and their scientific value assessed. The lifetime description for sodium atoms in the Io sodium cloud model was improved by incorporating the most recently available temperatures and densities for ions and electrons in the plasma torus.

Smyth, W. H.↗
NASA NTRS1989

Mars rover concept development

A structured study effort to develop an extensive, innovative set of mobility and navigation concepts for a planetary exploration vehicle along with the concomitant value system and evaluation tools is presented. A further objective is to submit these concepts to a rigorous, structured evaluation process to derive the most promising candidate systems. To support the evaluation process, a three-layer computer model of the Martian surface was developed, based on the 1/64 deg Digital Elevation Model (DEM) of Mars. Local surface roughness based on measured Martian slope distribution and power spectral density was superimposed on the DEM, and rocks based on Moore's distribution model were added. To assess performance, selected concepts were modeled using DADS, and simulations were run with the vehicle traversing the Martian surface model, including one-meter-high vertical steps and one-meter-wide crevasses. The design details of three promising candidate systems are presented, along with the discussion of their evolution with some recommendations.

Mctamaney, Louis S.↗
NASA NTRS1992

WELDSMART: A vision-based expert system for quality control

This work was aimed at exploring means for utilizing computer technology in quality inspection and evaluation. Inspection of metallic welds was selected as the main application for this development and primary emphasis was placed on visual inspection, as opposed to other inspection methods, such as radiographic techniques. Emphasis was placed on methodologies with the potential for use in real-time quality control systems. Because quality evaluation is somewhat subjective, despite various efforts to classify discontinuities and standardize inspection methods, the task of using a computer for both inspection and evaluation was not trivial. The work started out with a review of the various inspection techniques that are used for quality control in welding. Among other observations from this review was the finding that most weld defects result in abnormalities that may be seen by visual inspection. This supports the approach of emphasizing visual inspection for this work. Quality control consists of two phases: (1) identification of weld discontinuities (some of which may be severe enough to be classified as defects), and (2) assessment or evaluation of the weld based on the observed discontinuities. Usually the latter phase results in a pass/fail judgement for the inspected piece. It is the conclusion of this work that the first of the above tasks, identification of discontinuities, is the most challenging one. It calls for sophisticated image processing and image analysis techniques, and frequently ad hoc methods have to be developed to identify specific features in the weld image. The difficulty of this task is generally not due to limited computing power. In most cases it was found that a modest personal computer or workstation could carry out most computations in a reasonably short time period. Rather, the algorithms and methods necessary for identifying weld discontinuities were in some cases limited. The fact that specific techniques were finally developed and successfully demosntrated to work illustrates that the general approach taken here appears to be promising for commercial development of computerized quality inspection systems. Inspection based on these techniques may be used to supplement or substitute more elaborate inspection methods, such as x-ray inspections.

Andersen, Kristinn↗