Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Confocal Raman studies in determining crystalline nature of PECVD grown Si nanowires

Silicon nanowires of diameter ∼200 nm and length of 2-4 µm are grown in the plasma enhanced chemical vapour deposition technique using nanoclustered Au catalyst assisted vapour-liquid-solid process. The crystallinity in the as-grown and annealed samples is studied using confocal Raman spectroscopic studies. Amorphous phase is formed in the as-grown samples. Structural studies using high resolution transmission electron microscopy confirm the polycrystalline nature in the annealed sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of string-like collective atomic motion on diffusion and structural relaxation in glass forming Cu-Zr alloys

We investigate Cu-Zr liquid alloys using molecular dynamics simulation and well-accepted embedded atom method potentials over a wide range of chemical composition and temperature as model metallic glass-forming (GF) liquids. As with other types of GF materials, the dynamics of these complex liquids are characterized by “dynamic heterogeneity” in the form of transient polymeric clusters of highly mobile atoms that are composed in turn of atomic clusters exhibiting string-like cooperative motion. In accordance with the string model of relaxation, an extension of the Adam-Gibbs (AG) model, changes in the activation free energy ΔG{sub a} with temperature of both the Cu and Zr diffusion coefficients D, and the alpha structural relaxation time τ{sub α} can be described to a good approximation by changes in the average string length, L. In particular, we confirm that the strings are a concrete realization of the abstract “cooperatively rearranging regions” of AG. We also find coexisting clusters of relatively “immobile” atoms that exhibit predominantly icosahedral local packing rather than the low symmetry packing of “mobile” atoms. These two distinct types of dynamic heterogeneity are then associated with different fluid structural states. Glass-forming liquids are thus analogous to polycrystalline materials where the icosahedrally packed regions correspond to crystal grains, and the strings reside in the relatively disordered grain boundary-like regions exterior to these locally well-ordered regions. A dynamic equilibrium between localized (“immobile”) and wandering (“mobile”) particles exists in the liquid so that the dynamic heterogeneity can be considered to be type of self-assembly process. We also characterize changes in the local atomic free volume in the course of string-like atomic motion to better understand the initiation and propagation of these fluid excitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Sn doping on the room temperature magnetodielectric properties of yttrium iron garnet

The structures, magnetic properties, permittivity spectra, and magnetodielectric (MD) effects of polycrystalline Y{sub 3}Fe{sub 5−x}Sn{sub x}O{sub 12} compounds prepared by solid state reactions were systematically investigated. The substitution of Sn{sup 4+} leads to lattice expansion and the donation of excess electrons in ceramics, which affects the concentration of Fe{sup 2+}, space charge, and electric dipole. As a result, as the amount of Sn dopant increases, so does saturation magnetization and permittivity in the low frequency band. The MD coefficient ([ε{sub r}(H) − ε{sub r}(0)]/ε{sub r}(0)) of lightly doped samples (x ≤ 0.05) is negative in the entire frequency band, reaching −2.3% at 350 MHz and 0.6 T for Y{sub 3}Fe{sub 4.95}Sn{sub 0.05}O{sub 12} ceramics. The MD coefficient of heavily doped samples (x > 0.05) is positive in the low frequency band, reaching 0.83% at 10 MHz and 0.6 T for Y{sub 3}Fe{sub 4.925}Sn{sub 0.075}O{sub 12} ceramics, and then decreasing with the increasing frequency, gradually becoming negative in the high frequency band. A detailed explanation is provided based on the origin of permittivity. This study provides a new methodology according to which the MD materials may be designed in order to satisfy the requirements of engineering applications.

36 MATERIALS SCIENCE↗

CHARACTERIZATION OF SECONDARY PHASES AND OTHER DEFECTS IN CDZNTE

Semiconducting CdZnTe or 'CZT' crystals are very suitable for use as a room temperature-based gamma radiation spectrometer. During the last decade, modifications in growth methods for CZT have significantly improved the quality of the produced crystals however there are material features that can influence the performance of these materials as radiation detectors. For example, various structural heterogeneities within the CZT crystals, such as, pipes, voids, polycrystallinity, and secondary phases (SP) can have a negative impact on the detector performance. In this study, a CZT material was grown by the modified vertical Bridgman growth (MVB) method with zone leveled growth in the absence of excess Te in the melt. Numerous SP were imaged using transmission IR at a volume % of 0.002. Samples from this material were analyzed using various analytical techniques to evaluate its electrical properties, purity and detector performance as radiation spectrometers and to determine the morphology, dimension and elemental /structural composition of one of the SP in this material. This material was found to have a high resistivity and good radiation spectrometer performance. It had SPs that were rich in calcium (Ca), carbon (C) and oxygen (O) (possibly CaCO{sub 3}) or only C and O that were 5 {micro}m or less in diameter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural, dielectric and magnetic properties of Bi{sub 0.8}Ba{sub 0.2}Fe{sub 0.6}Mn{sub 0.4}O{sub 3} ceramic

Polycrystalline Bi{sub 0.8}Ba{sub 0.2}Fe{sub 0.6}Mn{sub 0.4}O{sub 3} ceramic was synthesized via conventional two stage solid state reaction method. The crystal structure is examined via powder x-ray diffraction and Rietveld refinement revealed that the sample has a rhombohedral crystal structure (space group R3c). The dielectric response of the sample was analyzed in the frequency range 10 Hz to 5 MHz at different temperature. The values of dielectric constant (ε′) and dielectric loss factor (tan δ) increases with increasing temperature at different frequencies which may be the result of increase in the number of charge carriers and their mobilities due to the thermal activation. M-H hysteresis loop was recorded at room temperature up to a field of 15 kOe which shows that there is slightly enhancement in magnetization with co-doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elucidating the alkaline oxygen evolution reaction mechanism on platinum

Understanding the interplay between surface chemistry, electronic structure, and reaction mechanism of the catalyst at the electrified solid/liquid interface will enable the design of more efficient materials systems for sustainable energy production. The substantial progress in operando characterization, particularly using synchrotron based X-ray spectroscopies, provides the unprecedented opportunity to uncover surface chemical and structural transformations under various (electro)chemical reaction environments. In this work, we study a polycrystalline platinum surface under oxygen evolution conditions in an alkaline electrolyte by means of ambient pressure X-ray photoelectron spectroscopy performed at the electrified solid/liquid interface. We elucidate previously inaccessible aspects of the surface chemistry and structure as a function of the applied potential, allowing us to propose a reaction mechanism for oxygen evolution on a platinum electrode in alkaline solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain-induced tetragonal distortions and multiferroic properties in polycrystalline Sr 1 - x B a x Mn O 3 ( x = 0.43 - 0.45 ) perovskites

Here, we report a comprehensive structure-property phase diagram of unique single-ion type-1 multiferroic pseudocubic Sr 1-x Ba x MnO 3 perovskites. Employing a specially designed multi-step reduction-oxidation synthesis technique, we describe the successful synthesis of previously unknown Sr 1-x Ba x MnO 3 compositions in their polycrystalline form with a significantly extended Ba solubility limit that is only rivaled by a very limited number of crystals and thin films grown under non-equilibrium conditions. Understanding the multiferroic interplay with structure in Sr 1-x Ba x MnO 3 is of great importance as it opens the door wide to the development of newer materials from the parent (AA’)(BB’) O 3 system with enhanced properties. To this end, using a combination of time-of-flight neutron and synchrotron x-ray scattering techniques, we determined the exact structures and quantified the Mn and oxygen polar distortions above and below T C and T N . In its ferroelectric state, the system crystalizes in the noncentrosymmetric tetragonal P4mm space group which gives rise to a large electric dipole moment P s , in the z-direction, of 18.4 and 29.5 µC/cm 2 for x = 0.43 and 0.45, respectively. The two independently driven ferroelectric and magnetic order parameters are single-handedly accommodated by the Mn sublattice leading to a novel strain-assisted multiferroic behavior in agreement with many theoretical predictions. Our neutron diffraction results demonstrate the large and tunable suppression of the ferroelectric order at the onset of AFM ordering and confirm the coexistence and strong coupling of the two ferroic orders below T N . The refined magnetic moments confirm the strong covalent bonding between Mn and the oxygen anions which is necessary for stabilizing the ferroelectric phase.

36 MATERIALS SCIENCE↗

Structure and properties of antimony-doped lanthanum molybdate La{sub 2}Mo{sub 2}O{sub 9}

Polycrystalline samples of the composition La{sub 2}Mo{sub 2-x}Sb{sub x}O{sub 9-y}, where 0 {<=} x {<=} 0.05, were prepared by solid-phase synthesis. Single crystals of La{sub 2}Mo{sub 1.96}Sb{sub 0.04}O{sub 8.17} were obtained by spontaneous crystallization from flux. The structure of the metastable {beta}{sub ms} phase of this compound was determined at room temperature by X-ray diffraction. It was found that the La, Mo, and O1 atoms are displaced from the threefold axis on which they are located in the high-temperature {beta} phase. It was shown that molybdenum atoms in the crystal structure are partially replaced by antimony atoms, which are located on the threefold axis. In antimony-doped crystals, lanthanum atoms partially return to the site on the threefold axis and the coordination environment of molybdenum cations becomes more ordered, thus facilitating the stabilization of the cubic phase at room temperature. Calorimetric measurements (DSC) showed that the introduction of Sb as the dopant into the La{sub 2}Mo{sub 2}O{sub 9} structure leads to a decrease in the temperature of the {alpha} {yields} {beta} phase transition from 570 to 520 Degree-Sign C and to the partial suppression of this transition. The temperature behavior of the conductivity confirms the DSC data. Thus, doping with Sb contributes to the stabilization of the cubic phase at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-dependent structural property and power factor of n type thermoelectric Bi{sub 0.90}Sb{sub 0.10} and Bi{sub 0.86}Sb{sub 0.14} alloys

Thermal variation of structural property, linear thermal expansion coefficient (α), resistivity (ρ), thermopower (S), and power factor (PF) of polycrystalline Bi{sub 1-x}Sb{sub x} (x = 0.10 and 0.14) samples are reported. Temperature-dependent powder diffraction experiments indicate that samples do not undergo any structural phase transition. Rietveld refinement technique has been used to perform detailed structural analysis. Temperature dependence of α is found to be stronger for Bi{sub 0.90}Sb{sub 0.10}. Also, PF for direct band gap Bi{sub 0.90}Sb{sub 0.10} is higher as compared to that for indirect band gap Bi{sub 0.86}Sb{sub 0.14}. Role of electron-electron and electron-phonon scattering on ρ, S, and PF has been discussed.

36 MATERIALS SCIENCE↗

Synthesis and microstructural TEM investigation of CaCu{sub 3}Ru{sub 4}O{sub 12} ceramic and thin film

CaCu{sub 3}Ru{sub 4}O{sub 12} (CCRO) is a conductive oxide having the same structure as CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and close lattice parameters. The later compound is strongly considered for high density parallel plates capacitors application due to its so-called colossal dielectric constant. The need for an electrode inducing CCTO epitaxial growth with a clean and sharp interface is therefore necessary, and CCRO is a good potential candidate. In this paper, the synthesis of monophasic CCRO ceramic is reported, as well as pulsed laser deposition of CCRO thin film onto (001) NdCaAlO{sub 4} substrate. Structural and physical properties of bulk CCRO were studied by transmission electron microscopy and electron spin resonance. CCRO films and ceramic exhibited a metallic behavior down to low temperature. CCRO films were (001) oriented and promoted a CCTO film growth with the same orientation. - Graphical Abstract: Structure of CaCu{sub 3}Ru{sub 4}O{sub 12} showing the RuO{sub 6} octahedra and the square planar environment for Cu{sup 2+}. Highlights: > In this study, we investigate the structural properties and microstructure of ceramics CaCu{sub 3}Ru{sub 4}O{sub 12}. > We study the conduction properties of polycrystalline material. > Then we synthesize the conductive thin film which is deposited on a high K material with the same structure (CaCu{sub 3}Ti{sub 4}O{sub 12}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ir-Ni Bimetallic OER Catalysts Prepared by Controlled Ni Electrodeposition on Irpoly and Ir(111)

The alteration of electrocatalytic surfaces with adatoms lead to structural and electronic modifications promoting adsorption, desorption, and reactive processes. This study explores the potentiostatic electrodeposition process of Ni onto polycrystalline Ir (Irpoly) and assesses the electrocatalytic properties of the resulting bimetallic surfaces. The electrodeposition resulted in bimetallic Ni overlayer (OL) structures and in combination with controlled thermal post-deposition annealing in bimetallic near-surface alloys (NSA). The catalytic oxygen evolution reaction (OER) activity of these two different Ni-modified catalysts is assessed and compared to a pristine, unmodified Irpoly. An overlayer of Ni on Irpoly showed superior performance in both acidic and alkaline milieu. The reductive annealing of the OL produced a NSA of Ni, which demonstrated enhanced stability in an acidic environment. The remarkable activity and stability improvement of Ir by Ni modification makes both systems efficient electrocatalysts for water oxidation. The roughness factor of Irpoly is also reported. With the amount of deposited Ni determined by inductively coupled plasma mass spectrometry (ICP-MS) and a degree of coverage (monolayer) in the dependence of deposition potential is established. The density functional theory (DFT) assisted evaluation of H adsorption on Irpoly enables determination of the preferred Ni deposition sites on the three low-index surfaces (111), (110), and (100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-to-solid phase transformations of nanostructured selenium-tin thin films induced by thermal annealing in oxygen atmosphere

The structural and morphological evolution of nanostructured thin films obtained from thermal evaporation of polycrystalline Sn-Se starting charge as a function of the subsequent annealing temperature in an oxygen flow has been analysed. High-resolution transmission electron microscopy, small area electron diffraction, digital image processing, x-ray diffraction and Raman spectroscopy have been employed in order to investigate the structure and the morphology of the obtained films. The results evidenced, in the temperature range from RT to 500°C, the transition of the material from a homogeneous mixture of SnSe and SnSe{sub 2} nanocrystals, towards a homogeneous mixture of SnO{sub 2} and SeO{sub 2} nanocrystals, with an intermediate stage in which only SnSe{sub 2} nanocrystals are present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of ferroelectric domain structures embedded inside polychrystalline BaTiO3 during heating

The evolution of ferroelectric domains inside a single grain of a polycrystalline BaTiO{sub 3} ceramic was investigated under quasistatic heating by using polychromatic scanning x-ray microdiffraction. Four domain orientations were observed, three of which exhibited a classic of {approx}90{sup o} ferroelastic relationship. The fourth domain orientation was found to be crystallographically related with one of the other orientations by a rotation of either 180.47{sup o} or 0.47{sup o}. While heating the polycrystalline BaTiO{sub 3} from room temperature to above the Curie temperature (125 C), all four ferroelectric domain orientations rotated toward a paraelectric cubic orientation which was found to be at an intermediate orientation relative to the four domain orientations. The crystallographic relationships of the domains with respect to paraelectric phase were explained using a domain structure model by Nepochatenko.

36 MATERIALS SCIENCE↗

Structure and Properties of Gallium-Oxide Films Produced by High-Frequency Magnetron-Assisted Deposition

The properties of gallium-oxide films produced by the radio-frequency magnetron-assisted sputtering of a β-Ga{sub 2}O{sub 3} target with deposition onto sapphire substrates are studied. The as-deposited gallium-oxide films are polycrystalline and contain crystallites of the α and β phases. Exposure to oxygen plasma does not bring about the appearance of new crystallites but makes crystallites several times larger in average dimensions in the substrate plane. After annealing at 900°C, the crystallite size becomes twice as large as that in the unannealed film. The films not subjected to thermal annealing exhibit a high resistance at 20°C. In the range of 50–500°C, the conductivity of the samples (G) only slightly depends on temperature (T) and, as T is elevated further, exponentially increases with the activation energy 0.7–1.0 eV. After annealing of the films in argon at 900°C (30 min), the conductivity G starts to sharply increase at T ≈ 350°C. In the dependence of lnG on T {sup –1}, a maximum in the range of 470–520°C and a portion of decreasing conductivity at higher temperatures are observed. The unusual temperature dependence of the conductivity after annealing is attributed to a change in the structure and phase composition of polycrystalline gallium-oxide films and, possibly, to some effects at the surface. The structures produced on insulating substrates are solar blind in the visible wavelength region and sensitive to radiation in the ultraviolet region (222 nm).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Grain boundary structure search by using an evolutionary algorithm with effective mutation methods

Grain boundaries (GBs) accommodate the misorientation between adjacent grains in a polycrystalline material. GBs are geometrically described by the macroscopic and microscopic degrees of freedom. Besides, at the atomistic level, GBs exhibit complicated behaviors under varying thermodynamic conditions. The complexity of atomistic GB structures demands stochastic searching for possible states. The effectiveness of stochastic search methods relies on techniques to recreate and select atomistic structures. In this work, we developed a new mutation operator that can induce direct and collective atomistic structure changes to boost the search efficiency of exploring GB structures with evolutionary algorithms (EA). We implemented the mutation methods along with innovative selection, crossover, boundary condition preprocessing methods to form an EA-based package to explore GB structures in grand canonical ensembles with atomistic simulations. We used this package to study the [001] symmetric tilt grain boundaries (STGBs) in FCC copper (Cu), the [110] STGBs in BCC tungsten (W), and the $[1\bar{2}10]$ STGBs in HCP magnesium (Mg). The results show that our design and implementation based on new mutation procedures, selection, and boundary conditions provide a high-quality search of atomistic GB structures in the grand canonical ensemble for different crystal lattices.

36 MATERIALS SCIENCE↗

Structural and Magnetic Properties of the Series of Double-Perovskite Sr{sub 2−x}Bi{sub x}MnMoO{sub 6}

Polycrystalline samples of a series of double-perovskite Sr{sub 2−x}Bi{sub x}MnMoO{sub 6} (x = 0, 0.05, 0.10, 0.15, 0.20, and 0.25) were synthesized by solid-state reaction, and their structural and magnetic properties were investigated by means of X-ray power diffraction and magnetic measures. Rietveld analysis of room-temperature XRD data shows that all the samples are single phases and belong to the I4/m space group. The degree of Mn/Mo order (η) and the unit-cell volume decrease monotonically with the increase of Bi concentration. The field dependence of the magnetization suggests that all the samples are anti-ferromagnetism. With Bi doping, the magnetization increases at low Bi concentration (x ≤ 0.15), which indicates the formation of ferrimagnetic interaction between the Mo{sup 5+} and Mn{sup 2+} caused by the effect of the electron doping in the compounds; however, due to the decline of the Mn/Mo order (η), the magnetization tends to decrease upon the Bi concentration in the high doping levels (0.15 ≤ x ≤ 0.25). The non-monotonic variation of the Neel temperature (T{sub N}) is consistent with the variation tendency of magnetization upon Bi doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of pressure on the magnetic-structural and Griffiths-like transitions in Dy5Si3Ge

Magnetization studies have been performed on a polycrystalline sample of Dy5Si3Ge as a function of an applied magnetic field (up to 50 kOe) and hydrostatic pressure (up to 10 kbar) in the 5–300 K temperature range. The anomalous behavior of the magnetic susceptibility indicates that a Griffiths-like phase exists at low magnetic fields and pressures up to 10 kbar. We present evidence that the high-temperature second-order ferromagnetic transition can be coupled with the low-temperature first-order crystallographic transformation into a single first-order magnetic-crystallographic transformation using a magnetic field and hydrostatic pressure as tuning parameters. The effect of pressure on the Griffiths-like phase is reported and analyzed in the framework of the complex competition between the interslab and intraslab magnetic interactions.

36 MATERIALS SCIENCE↗

Synthesis, structure and physical properties of reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22}

Polycrystalline sample of the reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22} was synthesized by solid state reaction at 1523 K in Ar atmosphere for the first time. The Rietveld refinement using the powder X-ray diffraction data confirmed the sample to be main phase of Ba{sub 2}Ti{sub 13}O{sub 22} having the orthorhombic crystal system, space group Bmab and the lattice parameters of a=11.67058(11) A, b=14.12020(13) A and c=10.06121(9) A, and V=1657.995(20) A{sup 3}. The valence state of Ti was evaluated by both the Ti-O bond distance analysis and the Ti K-edge XANES analysis. The magnetic susceptibility was nearly temperature independent in the range of 60-300 K, suggesting the Van Vleck Paramagnetism. The electrical conductivity at 300 K is approximately 320.50 S/cm, and a semiconducting behavior was observed below room temperature. The Seebeck coefficient showed a negative value of -1.25 {mu}V/K at 300 K, indicating n-type behavior. These facts were confirmed by the results of the present theoretical calculations by the FLAPW method. - Graphical abstract: Temperature dependence of the electrical conductivity of Ba{sub 2}Ti{sub 13}O{sub 22}. A plot of ln {sigma} versus T{sup -1} is shown by open circles, and a plot of ln {sigma} versus T{sup -1/4} is shown by open triangles. Highlights: > Polycrystalline samples of Ba{sub 2}Ti{sub 13}O{sub 22} synthesis by solid state reaction. > Theoretical calculation by FLAPW method. > Electrical property measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗