Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Investigation of structural and magnetic properties of nanocrystalline manganese substituted lithium ferrites

Nanocrystalline manganese substituted lithium ferrites Li{sub 0.5}Fe{sub 2.5-x}Mn{sub x}O{sub 4} (2.5<=x>=0) were prepared by sol-gel auto-combustion method. X-ray diffraction patterns revealed that as the concentration of manganese increased, the cubic phase changed to tetragonal. Magnetic properties were measured by hysteresis loop tracer technique. All the compositions indicated ferrimagnetic nature. The surface morphology of all the samples was studied by using scanning and transmission electron microscopy. The substitution of manganese ions in the lattice affected the structural as well as magnetic properties of spinels. - Graphical abstract: The synthesized nanoparticles shapes, sizes and size dispersibilities were obtained from the transmission electron microscopy (TEM). The TEM micrographs of synthesized samples revealed that, spherical shape with average particle size 50 nm. Selected area electron diffraction pattern (SAED) suggests the polycrystallinity and also the formation of spinel ferrites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rapid synthesis of Co, Ni co-doped ZnO nanoparticles: Optical and electrochemical properties

We report for the first time a rapid preparation of Zn{sub 1−2x}Co{sub x}Ni{sub x}O nanoparticles via a versatile and environmentally friendly route, microwave-assisted hydrothermal (MAH) method. The Co, Ni co-doped ZnO nanoparticles present an effect on photoluminescence and electrochemical properties, exhibiting excellent electrocatalytic performance compared to undoped ZnO sample. Photoluminescence spectroscopy measurements indicated the reduction of the green–orange–red visible emission region after adding Co and Ni ions, revealing the formation of alternative pathways for the generated recombination. The presence of these metallic ions into ZnO creates different defects, contributing to a local structural disorder, as revealed by Raman spectra. Electrochemical experiments revealed that the electrocatalytic oxidation of dopamine on ZnO attached to multi-walled carbon nanotubes improved significantly in the Co, Ni co-doped ZnO samples when compared to pure ZnO. - Graphical abstract: Rapid synthesis of Co, Ni co-doped ZnO nanoparticles: optical and electrochemical properties. Co, Ni co-doped ZnO hexagonal nanoparticles with optical and electrocatalytic properties were successfully prepared for the first time using a microwave hydrothermal method at mild conditions. - Highlights: • Co{sup 2+} and Ni{sup 2+} into ZnO lattice obtained a mild and environmentally friendly process. • The heating method strongly influences in the growth and shape of the particles. • Short-range defects generated by the ions insertion affects the photoluminescence. • Doped ZnO nanoparticles improve the electrocatalytic properties of pure oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel red phosphor Na{sub 2}Ca{sub 4}Mg{sub 2}Si{sub 4}O{sub 15}:Eu{sup 3+} for plasma display panels

A novel red emitting phosphor, Eu{sup 3+}-doped Na{sub 2}Ca{sub 4}Mg{sub 2}Si{sub 4}O{sub 15}, was prepared by the solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the formation of Na{sub 2}Ca{sub 4}Mg{sub 2}Si{sub 4}O{sub 15}:Eu{sup 3+}. Field-emission scanning electron-microscopy (FE-SEM) observation indicated a narrow size-distribution of about 300 nm for the particles with spherical shape. Upon excitation with vacuum ultraviolet (VUV) and near UV light, the phosphor showed strong red-emission lines at around 611 and 617 nm, respectively, corresponding to the forced electric dipole {sup 5}D{sub 0} {yields} {sup 7}F{sub 2} transition of Eu{sup 3+}, and the highest PL intensity at 617 nm was found at a content of about 8 mol% Eu{sup 3+}. The optical properties study suggests that it is a potential candidate for plasma display panels (PDPs) application.

36 MATERIALS SCIENCE↗

Synthesis and characterization of FeVO{sub 4} nanoparticles

Highlights: {yields} Simple co-precipitation method were employed for the synthesis of FeVO{sub 4}. {yields} The calcination temperature and the reaction time were optimized. {yields} The effect of surfactants on the structural, morphological and magnetic properties was studied. {yields} The shape of the particles changes due to the effect of surfactant. {yields} Enhancement of magnetic orderings on the addition of surfactant. -- Abstract: Iron vanadate (FeVO{sub 4}) nanoparticles were synthesized by simple co-precipitation method using various surfactants such as ethylene glycol, polyethylene glycol 200 and polyethylene glycol 400 as the structure directing agents. Systematic investigations on the structural, morphological and magnetic properties of the materials have been studied. The lattice constants of the triclinic structure of FeVO{sub 4} were calculated from the X-ray diffraction (XRD) analyses. The average grain size was estimated to be around 35 nm, which increased with increasing the calcination temperature. The stretching and bending vibrations of Fe-O were evaluated from the FT-IR spectra. Using VSM magnetometer, magnetic property was investigated through magnetic susceptibility and magnetization measurements. FeVO{sub 4} exhibits two magnetic ordering temperatures at T {approx} 20 K and 14 K, which is due to two different chemical environments of Fe ligands such as octahedral FeO{sub 6} and trigonal bipyramidal FeO{sub 5} in a six-column doubly bent chain, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated Quantitative Analysis of Extended Irradiation Defects - Dislocations, Voids and Precipitates in Neutron Irradiated HT-9 Steel

Structural alloys that make up the core components of nuclear reactors are exposed to radiation that can substantially alter the microstructure and mechanical properties of the material. Irradiation can cause the formation of extended defects including dislocation line and loops, voids and various types of precipitates. To understand the irradiation effects, it is critical to characterize these defects individually and collectively to quantify how they evolve throughout irradiation stages. Transmission electron microscopy (TEM) is a standard tool for providing extensive size, number density and spatial distribution of extended irradiation defects, however, manual measurement of defect size and number density requires time-intensive effort to analyze enough defects that provide a statistically meaningful result and are prone to errors of subjectivity. In this work, we developed a set of MATLAB algorithms offering robust and automated identification and quantification of extended irradiation defects like dislocation lines, voids and precipitates commonly observed in neutron irradiated cladding alloys [1]. Using a neutron-irradiated HT-9 martensitic alloy irradiated at 412°C to 111.8 dpa, we demonstrate the capability of these algorithms for quantitative defect analysis. Figure 1 presents defect images of the HT-9 using an advanced diffraction contrast imaging scanning transmission electron microscopy (DCI STEM) that suppresses bend contours and provides better defect contrast compared to conventional TEM [2]. The first step of defect analysis is defect identification, a process that can be digitally achieved by contrast thresholding (for simple defect contrast) and by machine learning computer vision for defect semantic segmentation [3]. Here, labeled binary defect images (Figures 2a and 2c) were used. For dislocation density quantification, we employed an optimized circular-grid intersection method first introduced by Dr. John Steeds [4]. This method is shown in Figures 2a and 2b, where the number of intersections of dislocation lines with circular traces was measured. This produces an unbiased sampling of dislocation lines, regardless of their orientation. This process was optimized with automated digital intersection number and grid length registration. Interestingly, it was found that a relatively large number of circles in a set circular gird is was needed to produce an invariant result (Figure 2b), with a low systematic measurement error. This demonstrates the main advantage of computer-based defect analysis, in performing repetitive operations quickly with a reduced systematic error. For the quantitative analysis of voids and precipitates a challenge encountered with automated defect analysis is feature overlap, particularly when the density of voids/precipitates is high. To mitigate this problem, as shown in Figure 2d, we modified the popular circular Hough transformation and treated ‘circular shape’ as the particle descriptor for voids/precipitates, efficiently resolving the overlapping particles. In summary, this automated digital quantification together with machine learning enabled defect identification [3] opens new opportunities for standardizing the characterization workflow for quantitative analysis of extended irradiation defects.

Sainju, Rajat↗

Highly Efficient Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol over Gold Supported on Zinc Oxide Materials

We used Au/ZnO catalysts for liquid-phase selective hydrogenation of cinnamaldehyde to cinnamyl alcohol and compared with Au/Fe 2 O 3 catalysts. To investigate the influence of the support on the hydrogenation activity and selectivity, three different Au/ZnO catalysts were synthesized, including Au/rod-tetrapod ZnO, Au/porous ZnO, and Au/ZnO-CP prepared using a coprecipitation method. Moreover, the influence of calcination temperature was also systematically investigated in this study. The characterization of Au/ZnO catalysts was performed using ICP, N 2 adsorption/desorption isotherms, X-ray diffraction, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy. Among all the supported Au catalysts prepared in this study, Au/ZnO-CP exhibits both the highest hydrogenation activity and selectivity. Using a 1.5% Au/ZnO-CP catalyst, 100% selectivity could be achieved with 94.9% conversion. Finally, we find that the Au particle (size and shape), the ZnO support (size and surface texture) and the interaction between Au and ZnO are three important parameters for achieving a highly efficient Au/ZnO catalyst.

36 MATERIALS SCIENCE↗

Solubility of Nanocrystalline Cerium Dioxide: Experimental Data and Thermodynamic Modeling

For this study, ultrafine 5 nm ceria isotropic nanoparticles were prepared using the rapid chemical precipitation approach from cerium(III) nitrate and ammonium hydroxide aqueous solutions. The as-prepared nanoparticles were shown to contain predominantly Ce(IV) species. The solubility of nanocrystalline CeO 2 at several pH values was determined using ICP-MS and radioactive tracer methods. Phase composition of the ceria samples remained unchanged upon partial dissolution, while the shape of the particles changed dramatically, yielding nanorods under neutral pH conditions. According to X-ray absorption spectroscopy investigation of the supernatant, Ce(III) was the main cerium species in solution at pH < 4. Based on the results obtained, a reductive dissolution model was used for data interpretation. According to this model, the solubility product for ceria nanoparticles was determined to be log K sp = -59.3 ± 0.3 in 0.01 M NaClO 4 . Taken together, our results show that the pH dependence of ceria anti- and pro-oxidant activity can be related to the dissolution of CeO 2 in aqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between Cr 3+ Luminescence and Oxygen Vacancy Disorder in Strontium Titanate under MeV Ion Irradiation

Strontium titanate (SrTiO 3 ), a model system with a strongly correlated electronic structure, has attracted much attention recently because of its outstanding physicochemical properties and considerable potentials for technological applications. The capability to control oxygen vacancy profiles and their effect on valence states of cations will increase significantly the functionality of devices based on transition metal oxides. This work presents new insights into the near-infrared luminescence emission of Cr 3+ centers in stoichiometric SrTiO 3 induced using 3 MeV protons at temperatures of 100 K, 170 K, and room temperature. The study covers a wide spectral range, including near-infrared, visible, and near-UV regions. Our main purpose is to investigate the role of the oxygen vacancies introduced by energetic charged particles on the shape and yield of induced luminescence spectra, in particular to explore the interplay between the Cr 3+ luminescence at 1.55 eV and oxygen disorder. A clear correlation is found between the decay of the Cr luminescence yield during irradiation and the growth of a band at 2.0 eV, well-resolved below 170 K, which has been very recently attributed to d–d transitions of electrons self-trapped as Ti 3+ in the close vicinity of oxygen vacancies. This correlation suggests irradiation-induced oxidation of the Cr 3+ (Cr 3+ → Cr n+ , n > 3) via trapping of irradiation-induced holes, while the partner electrons are self-trapped as Ti 3+ . Here, these new results provide effective guidelines for further understanding the electronic and photocatalytic behavior of STO:Cr 3+ .

36 MATERIALS SCIENCE↗

Organic Linker Effect on the Growth and Diffusion of Cu Clusters in a Metal–Organic Framework

One reason that metal nanoparticles encapsulated in metal-organic frameworks are of interest is that confinement effects on the particle size and shape may lead to superior catalytic activity. The interior of a metal–organic framework has the possibility to influence nucleation and aggregation of metal nanoparticles and to strongly affect their in situ shape and electronic properties. We apply density functional theory and ab initio molecular dynamics (AIMD) to model the nucleation and diffusion of Cun (n = 1–19) clusters on the tetratopic 1,3,6,8-(p-benzoate)pyrene (TBAPy 4– ) linkers of NU-1000 frameworks. We find that Cu atoms and Cu clusters are stabilized by the TBAPy linker, especially by the edge site of aromatic rings. The stabilization increases when the Cu cluster interacts with two linkers. We confirmed the most favorable site for Cu cluster adsorption as the window site that connects the c pore and the triangular pore. A Pt atom is found to bind much more strongly than a Cu atom on the TBAPy linker, and AIMD simulations show that this promotes Pt atom diffusion from the center of a Cu 15 cluster to the interface between the linker and the cluster. The strong interaction between a Pt atom and a linker is attributed to the greater metal-to-linker charge transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating 3D Surface Atomic Structure and Catalytic Activities of Pt Nanocrystals

Active sites and catalytic activity of heterogeneous catalysts is determined by their surface atomic structures. However, probing the surface structure at an atomic resolution is difficult, especially for solution ensembles of catalytic nanocrystals, which consist of heterogeneous particles with irregular shapes and surfaces. In this study, we constructed 3D maps of the coordination number (CN) and generalized CN ($\bar{C}\bar{N}$) for individual surface atoms of sub-3 nm Pt nanocrystals. Our results reveal that the synthesized Pt nanocrystals are enclosed by islands of atoms with nonuniform shapes that lead to complex surface structures, including a high ratio of low-coordination surface atoms, reduced domain size of low-index facets, and various types of exposed high-index facets. 3D maps of $\bar{C}\bar{N}$ are directly correlated to catalytic activities assigned to individual surface atoms with distinct local coordination structures, which explains the origin of high catalytic performance of small Pt nanocrystals in important reactions such as oxygen reduction reactions and CO electro-oxidation.

3D atomic structure↗

Sintering of Pt nanoparticles via volatile PtO 2 : Simulation and comparison with experiments

It is a longstanding question whether sintering of platinum under oxidizing conditions is mediated by surface migration of Pt species or through the gas phase, by PtO 2 (g). Clearly, a rational approach to avoid sintering requires understanding the underlying mechanism. A basic theory for the simulation of ripening through the vapor phase has been derived by Wynblatt and Gjostein. Recent modeling efforts, however, have focused entirely on surface-mediated ripening. In this work, we explicitly model ripening through PtO 2 (g) and study how oxygen pressure, temperature, and shape of the particle size distribution affect sintering. On the basis of the available data on α-quartz, adsorption of monomeric Pt species on the support is extremely weak and has therefore not been explicitly simulated, while this may be important for more strongly interacting supports. Our simulations clearly show that ripening through the gas phase is predicted to be relevant. Assuming clean Pt particles, sintering is generally overestimated. This can be remedied by explicitly including oxygen coverage effects that lower both surface free energies and the sticking coefficient of PtO 2 (g). Additionally, mass-transport limitations in the gas phase may play a role. Using a parameterization that accounts for these effects, we can quantitatively reproduce a number of experiments from the literature, including pressure and temperature dependence. Lastly, this substantiates the hypothesis of ripening via PtO 2 (g) as an alternative to surface-mediated ripening.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Zirconium Tungstate Ultra-Thin Fibers

This study reports an innovative method of electrospinning followed by pyrolysis to synthesize zirconium tungstate (ZrW2O8), a material with negative coefficient of thermal expansion (CTE), in ultra-thin fiber form. Morphologies and microstructures of the as-electrospun precursor fibers, the heat-treated intermediate fibers, and the final ZrW2O8 ultra-thin fibers were characterized by SEM, XRD, and TEM. The ZrW2O8 ultra-thin fibers had diameters in the sub-micrometer range with aspect ratios larger than 100; these fibers were polycrystalline, and consisted of single crystalline ZrW2O8 crystallites with sizes of 30-50 nm and surface roughness of several nanometers. The ZrW2O8 ultra-thin fibers are expected to outperform spherically, cylindrically, and/or irregularly shaped polycrystalline ZrW2O8 particles for the development of composites with precisely controlled CTEs. Additionally, this reported method could be utilized as a general approach to convert nano-scaled inorganic particles into fibers.

36 MATERIALS SCIENCE↗

Degradation mechanisms of Platinum Nanoparticle Catalysts in Proton Exchange Membrane Fuel Cells: The Role of Particle Size

Five membrane-electrode assemblies (MEAs) with different average sizes of platinum (Pt) nanoparticles (2.2, 3.5, 5.0, 6.7, and 11.3 nm) in the cathode were analyzed before and after potential cycling (0.6 to 1.0 V, 50 mV/s) by transmission electron microscopy. Cathodes loaded with 2.2 nm and 3.5 nm catalyst nanoparticles exhibit the following changes during electrochemical cycling: (i) substantial broadening of the size distribution relative to the initial size distribution, (ii) presence of coalesced particles within the electrode, and (iii) precipitation of sub-micron-sized particles with complex shapes within the membrane. In contrast, cathodes loaded with 5.0 nm, 6.7 nm and 11.3 nm size catalyst nanoparticles are significantly less prone to the aforementioned effects. As a result, the electrochemically-active surface area (ECA) of MEA cathodes loaded with 2.2 nm and 3.5 nm nanoparticle catalysts degrades dramatically within 1,000 cycles of operation, while the electrochemically-active surface area of MEA cathodes loaded with 5.0 nm, 6.7 nm and 11.3 nm nanoparticle catalysts appears to be stable even after 10,000 cycles. The loss in MEA performance for cathodes loaded with 2.2 nm and 3.5 nm nanoparticle catalysts appears to be due to the loss in electrochemically-active surface area concomitant with the observed morphological changes in these nanoparticle catalysts

DISSOLUTION↗

Collisionless instability of thin current sheets in the presence of sheared parallel flows

The first results of an ongoing investigation of the influence of sheared parallel flows on the onset of collisionless magnetic reconnection in thin current sheets are reported. In particular, an exact kinetic equilibrium that incorporates flow with a symmetric profile into the well-known Harris model is proposed and its linear stability is described. The complete linearized Vlasov-Maxwell system is solved using a numerical approach that introduces no approximations regarding the shape of the particle orbits or relative magnitude of the different components of the electromagnetic potentials. Thus accurate results are obtained in a difficult, but practically important limit where the characteristic length scales for the variation of the equilibrium magnetic field and flow are comparable to the ion kinetic length scales. In particular, the dispersion relation for an instability that produces magnetic reconnection is traced as a function of the flow speed V{sub 0} at the center of the sheet, starting with the collisionless tearing mode at V{sub 0}=0. The effects of the sheared flow are shown to qualitatively depend on the thickness of the current sheet. In relatively thick sheets the characteristic features of the dispersion relation depend mostly on the value of the flow shear. In this regime there exist regions of the parameter space where the flow is destabilizing. However, the growth rate of the instability never significantly exceeds that of the collisionless tearing mode and the mode is always stabilized at high enough values of V{sub 0}. When the sheet is thinner than the ion gyroradius in the asymptotic magnetic field, the flow shear introduces strong non-Maxwellian features into the equilibrium distribution function. In this regime, the flow is purely stabilizing for the equilibrium considered. The instability produces magnetic reconnection in all the parameter regimes considered. Finally, the results of the linear analysis are verified using large-scale particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ferromagnetic microdisks as carriers for biomedical applications.

We report the fabrication process, magnetic behavior, as well as the surface modification of ferromagnetic microdisks suspended in aqueous solution. They posses unique properties such as high magnetization of saturation, zero remanence due to spin vortex formation, intrinsic spin resonance at low frequencies, and the capability of delivering various biomolecules at once. Furthermore, because of their anisotropic shape, our magnetic particles rotate under alternating magnetic fields of small amplitude. This can be used to promote the idea of advanced therapies, which include combined drug delivery and magnetomechanical cell destruction when targeting tumor cells. The approach enables us to fabricate suitable magnetic carriers with excellent size tolerances, and then release them from the wafer into solution, ready for surface modification and therapeutic use. The particles have a magnetic core and are covered with few nanometers of gold on each side to provide stability at ambient conditions as well as biocompatibility and selective adhesion functions. A successful attempt to bind thiolates, including SH-modified antibody, to the disk's surface was demonstrated.

60 APPLIED LIFE SCIENCES↗

Rapid and eco-friendly synthesis of copper nanoparticles

Copper nanoparticles were synthesized successfully through chemical reduction method stabilized by PVA along with different stabilizers namely, Kondagogu (Cochlospermum gossypium), Maida Flour and Starch. The resulting copper nanoparticles were characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy (SEM) experiments to study the size and shape of the particles and functional group of the stabilizing agent. The particle sizes were confirmed by Small Angle X-ray Scattering (SAXS) experiment and are found to be around 6.5 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗