Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Observation of the Jet Diffusion Wake Using Dijets in Heavy-Ion Collisions

Energetic quarks and gluons traversing a hot and dense quark-gluon plasma deposit energy and momentum into the medium before hadronizing to collimated sprays of particles, known as jets. This energy-momentum deposition is expected to produce medium responses, collectively known as jet wakes, with “diffusion wake” denoting a depletion of particles in the direction opposite to the propagating jet. The diffusion wake is studied by comparing dijet-hadron correlations measured in lead-lead (PbPb) and proton-proton (pp) collisions. The analysis uses PbPb and pp data recorded at a nucleon-nucleon (NN) center-of-mass energy s NN = 5.02 TeV with the CMS detector at the CERN LHC. By exploring how the dijet-hadron correlation distributions differ for various pseudorapidity separations of the two jets in the dijet, the presence of a jet diffusion wake is firmly established. The diffusion wake signal has a significance greater than 5 standard deviations for charged particles in the transverse momentum range 1 < p T < 2 GeV . The measurements are compared with model predictions with and without jet wake effects, providing new insights into quark-gluon plasma properties and the formation of jet-induced wakes.

Hayrapetyan, Aram [Yerevan Phys. Inst.]↗
DOE OSTI2025

Measurement of 𝜔 meson production in 𝑝⁢𝑝 and 𝑝-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

We present the measurement of the 𝑝 T -differential production cross section of 𝜔 mesons in pp and 𝑝-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV at midrapidity by ALICE. In addition, the first measurement of the nuclear modification factor 𝑅 𝑝⁢Pb for 𝜔 mesons at LHC energies is presented, complementing the existing measurements of lighter neutral mesons such as the 𝜋 0 and 𝜂. Within the measured 𝑝 T range, the 𝑅 𝑝⁢Pb of 𝜔 mesons is compatible with no cold nuclear matter effects within the uncertainties, consistent with previous measurements at lower energies. The 𝜔/𝜋 0 ratio is presented for both collision systems, showing no collision system dependence within the uncertainties. The comparison to previously published 𝜔/𝜋 0 ratios at lower and higher collision energies in pp collisions suggests a decreasing trend of the ratio above 𝑝T = 4 GeV/𝑐 with increasing collision energy. The data in both collision systems are compared to predictions from PYTHIA 8, EPOS LHC, and DPMJET event generators, revealing significant shortcomings in these models’ ability to describe the production of 𝜔 mesons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

𝐷 0 -meson-tagged jet axes difference in proton-proton collisions at $\sqrt{s}$ = 5.02 TeV

Heavy-flavor quarks produced in proton-proton (pp) collisions provide a unique opportunity to investigate the evolution of quark-initiated parton showers from initial hard scatterings to final-state hadrons. By examining jets that contain heavy-flavor hadrons, this study explores the effects of both perturbative and nonperturbative QCD on jet formation and structure. The angular differences between various jet axes, Δ⁢𝑅 axis , offer insight into the radiation patterns and fragmentation of charm quarks. The first measurement of 𝐷 0 -tagged jet axes differences in pp collisions at $\sqrt{s}$ =5.02 TeV by the ALICE experiment at the LHC is presented for jets with transverse momentum 𝑝$^{ch jet}_{T}$ ≥ 10 GeV/𝑐 and 𝐷 0 mesons with 𝑝$^{D^0}_{T}$ ≥ 5 GeV/𝑐. In this 𝐷 0 -meson-tagged jet measurement, three jet axis definitions, each with different sensitivities to soft, wide-angle radiation, are used: the standard axis, soft drop groomed axis, and winner-takes-all axis. Measurements of the radial distributions of 𝐷 0 mesons with respect to the jet axes, Δ⁢𝑅 axis−D 0 , are reported, along with the angle, Δ⁢𝑅 axis , between the three jet axes. The 𝐷 0 meson emerges as the leading particle in these jets, closely aligning with the winner-takes-all axis and diverging from the standard jet axis. The results also examine how varying the sensitivity to soft radiation with grooming influences the orientation of the soft drop jet axis and uncover that charm-jet structure is more likely to survive grooming when the soft drop axis is further from the 𝐷 0 direction, providing further evidence of the dead-cone effect recently measured by ALICE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Measurement of substructure-dependent jet suppression in Pb + Pb collisions at 5.02 TeV with the ATLAS detector

The ATLAS detector at the Large Hadron Collider has been used to measure jet substructure modification and suppression in Pb + Pb collisions at a nucleon–nucleon center-of-mass energy $\sqrt{{^S}_{NN}}$ = 5.02 TeV in comparison with proton–proton (pp) collisions at $\sqrt{{^S}}$ = 5.02 TeV. The Pb + Pb data, collected in 2018, have an integrated luminosity of 1.72 nb -1 , while the pp data, collected in 2017, have an integrated luminosity of 260 pb -1 . Jets used in this analysis are clustered using the anti- k t algorithm with a radius parameter R = 0.4. The jet constituents, defined by both tracking and calorimeter information, are used to determine the angular scale r g of the first hard splitting inside the jet by reclustering them using the Cambridge–Aachen algorithm and employing the soft-drop grooming technique. The nuclear modification factor, R AA , used to characterize jet suppression in Pb + Pb collisions, is presented differentially in r g , jet transverse momentum, and in intervals of collision centrality. The R AA value is observed to depend significantly on jet r g . Jets produced with the largest measured r g are found to be twice as suppressed as those with the smallest r g in central Pb + Pb collisions. The R AA values do not exhibit a strong variation with jet p T in any of the r g intervals. The r g and p T dependence of jet R AA is qualitatively consistent with a picture of jet quenching arising from coherence and provides the most direct evidence in support of this approach.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

K ∗ (892) ± resonance production in Pb−Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The production of K *⁢(892) ± meson resonance is measured at midrapidity (| y |<0.5) in Pb-Pb collisions at $\sqrt{^sNN}$ = 5.02 TeV using the ALICE detector at the CERN Large Hadron Collider. The resonance is reconstructed via its hadronic decay channel K *⁢(892) ± → K $^0_S$⁢π ± . The transverse momentum distributions are obtained for various centrality intervals in the p T range of 0.4-16 GeV/ c . Measurements of integrated yields, mean transverse momenta, and particle yield ratios are reported and found to be consistent with previous ALICE measurements for K *⁢(892) 0 within uncertainties. The p T -integrated yield ratio 2 K *⁢(892) ± ⁢/(⁢ K + + K - ) in central Pb-Pb collisions shows a significant suppression at a level of 9.3σ⁢ relative to pp collisions. Thermal model calculations result in an overprediction of the particle yield ratio. Although both hadron resonance gas in partial chemical equilibrium (HRG-PCE) and MUSIC + SMASH simulations consider the hadronic phase, only HRG-PCE accurately represents the measurements, whereas MUSIC + SMASH simulations tend to overpredict the particle yield ratio. These observations, along with the kinetic freeze-out temperatures extracted from the yields measured for light-flavored hadrons using the HRG-PCE model, indicate a finite hadronic phase lifetime, which decreases with increasing collision centrality percentile. The p T-differential yield ratios 2 K *⁢(892) ±⁢ /(⁢ K + + K - ) and 2 K *⁢(892) ± ⁢/(⁢π + +π - ) are presented and compared with measurements in pp collisions at $\sqrt{s}$ = 5.02 TeV. Both particle ratios are found to be suppressed by up to a factor of five at p T <2.0 GeV/ c in central Pb-Pb collisions and are qualitatively consistent with expectations for rescattering effects in the hadronic phase. The nuclear modification factor ( R AA ) shows a smooth evolution with centrality and is found to be below unity at p T >8 GeV/ c , consistent with measurements for other light-flavored hadrons. The smallest values are observed in most central collisions, indicating larger energy loss of partons traversing the dense medium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Measurements of jet quenching using semi-inclusive hadron+jet distributions in 𝑝⁢𝑝 and central Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The ALICE Collaboration reports measurements of the semi-inclusive distribution of charged-particle jets recoiling from a high transverse momentum (high pT) charged hadron, in pp and central Pb-Pb collisions at center-of-mass energy per nucleon–nucleon collision $\sqrt{s_{NN}}$ = 5.02 TeV. The large uncorrelated background in central Pb-Pb collisions is corrected using a data-driven statistical approach which enables precise measurement of recoil jet distributions over a broad range in p T,ch jet and jet resolution parameter R. Recoil jet yields are reported for R = 0.2, 0.4, and 0.5 in the range 7 < p T,ch jet < 140 GeV/c and π/2 < φ < π, where φ is the azimuthal angular separation between hadron trigger and recoil jet. The low-p T,ch jet reach of the measurement explores unique phase space for studying jet quenching, the interaction of jets with the quark–gluon plasma generated in high-energy nuclear collisions. Comparison of p T,ch jet distributions from pp and central Pb-Pb collisions probes medium-induced jet energy loss and intra-jet broadening, while comparison of their acopla narity distributions explores in-medium jet scattering and medium response. The measurements are compared to theoretical calculations incorporating jet quenching.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Quark flavor balancing in nuclear collisions

The notion of charge balance function, originally designed to study the evolution of charge production in heavy-ion collisions, is extended to consider quark flavor balancing. This extension is considered based on simulations performed with the PYTHIA 8 event generator in the context of pp collisions at √𝑠 = 13.6, 7, and 2.76 TeV but can be trivially applied to any other scenario and implemented in measurements of correlated particle production in pp, pA, and AA collisions at colliders. Correlation of selected flavor balancing pairs is examined as a function of the produced charged particle multiplicity. One finds that the amplitude of the correlations increases monotonically with the number of balanced flavors and the actual flavor content of correlated particles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

First measurement of 𝐷 𝑠⁢1 ⁡(1 + )⁢(2536) + and 𝐷$^{*}_{𝑠⁢2}$⁡(2 + )⁢(2573) + production in proton-proton collisions at $\sqrt{s}$ = 13 TeV at the LHC

The production yields of the orbitally excited charm-strange mesons D s⁢1 ⁡(1 + )⁢(2536)+ and 𝐷$^{*}_{𝑠⁢2}$⁡(2 + )⁢(2573) + were measured for the first time in proton-proton (pp) collisions at a center-of-mass energy of $\sqrt{s}$ =13 TeV with the ALICE experiment at the LHC. The D$^{+}_{s⁢1}$ and D$^{*+}_{s⁢2}$ mesons were measured at midrapidity (|𝑦| < 0.5) in minimum-bias and high-multiplicity pp collisions in the transverse-momentum interval 2< 𝑝 T < 24 GeV/𝑐. Their production yields relative to the D$^{+}_{s}$ ground-state yield were found to be compatible between minimum-bias and high-multiplicity collisions, as well as with previous measurements in e ± ⁢p and e + ⁢e − collisions. The measured D$^{+}_{s⁢1}$/D$^{+}_{s}$ and D$^{*+}_{s⁢2}$/D$^{+}_{s}$ yield ratios are described by statistical hadronization models and can be used to tune the parameters governing the production of excited charm-strange hadrons in Monte Carlo generators, such as pythia 8.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Strong Constraints on Jet Quenching in Centrality-Dependent p + Pb Collisions at 5.02 TeV from ATLAS

Jet quenching is the process of color-charged partons losing energy via interactions with quark-gluon plasma droplets created in heavy-ion collisions. The collective expansion of such droplets is well described by viscous hydrodynamics. Similar evidence of collectivity is consistently observed in smaller collision systems, including p p and p + Pb collisions. In contrast, while jet quenching is observed in Pb + Pb collisions, no evidence has been found in these small systems to date, raising fundamental questions about the nature of the system created in these collisions. The ATLAS experiment at the Large Hadron Collider has measured the yield of charged hadrons correlated with reconstructed jets in 0.36 nb -1 of p + Pb and 3.6 pb -1 of pp collisions at 5.02 TeV. The yields of charged hadrons with ${p}^{ch}_{T}$ > 0.5 GeV near and opposite in azimuth to jets with ${p}^{jet}_{T}$ > 30 or 60 GeV, and the ratios of these yields between p + Pb and pp collisions, I pPb , are reported. The collision centrality of p + Pb events is categorized by the energy deposited by forward neutrons from the struck nucleus. The I pPb values are consistent with unity within a few percent for hadrons with ${p}^{ch}_{T}$ > 4 GeV at all centralities. These data provide new, strong constraints that preclude almost any parton energy loss in central p + Pb collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of Suppression of Large-Radius Jets and Its Dependence on Substructure in Pb+Pb Collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with the ATLAS Detector

This letter presents a measurement of the nuclear modification factor of large-radius jets in $\sqrt{s_{NN}}$ = 5.02 TeV Pb + Pb collisions by the ATLAS experiment. The measurement is performed using 1.72 nb –1 and 257 pb –1 of Pb + Pb and pp data, respectively. The large-radius jets are reconstructed with the anti-k t algorithm using a radius parameter of R = 1.0, by reclustering anti-k t R = 0.2 jets, and are measured over the transverse momentum (p T ) kinematic range of 158 < p T <1000 GeV and absolute pseudorapidity |y| < 2.0. The large-radius jet constituents are further reclustered using the k t algorithm in order to obtain the splitting parameters, $\sqrt{d_{12}}$ and Δ⁢R 12 , which characterize the transverse momentum scale and angular separation for the hardest splitting in the jet, respectively. The nuclear modification factor, R AA , obtained by comparing the Pb + Pb jet yields to those in pp collisions, is measured as a function of jet transverse momentum (p T ) and $\sqrt{d_{12}}$ or Δ⁢R 12 . A significant difference in the quenching of large-radius jets having single subjet and those with more complex substructure is observed. Systematic comparison of jet suppression in terms of R AA for different jet definitions is also provided. Presented results support the hypothesis that jets with hard internal splittings lose more energy through quenching and provide a new perspective for understanding the role of jet structure in jet suppression.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Exploring the Strong Interaction of Three-Body Systems at the LHC

Deuterons are atomic nuclei composed of a neutron and a proton held together by the strong interaction. Unbound ensembles composed of a deuteron and a third nucleon have been investigated in the past using scattering experiments, and they constitute a fundamental reference in nuclear physics to constrain nuclear interactions and the properties of nuclei. In this work, K + -d and p-d femtoscopic correlations measured by the ALICE Collaboration in proton-proton (pp) collisions at $\sqrt{s}$ = 13 TeV at the Large Hadron Collider (LHC) are presented. It is demonstrated that correlations in momentum space between deuterons and kaons or protons allow us to study three-hadron systems at distances comparable with the proton radius. The analysis of the K + -d correlation shows that the relative distances at which deuterons and protons or kaons are produced are around 2 fm. The analysis of the p-d correlation shows that only a full three-body calculation that accounts for the internal structure of the deuteron can explain the data. In particular, the sensitivity of the observable to the short-range part of the interaction is demonstrated. These results indicate that correlations involving light nuclei in pp collisions at the LHC will also provide access to any three-body system in the strange and charm sectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Privacy Preserving Federated Learning for Advanced Scientific Ecosystems

We present a framework to provide privacy preserving (PP) federating learning (FL) across multiple computational and experimental facilities. This work joins the compute capabilities of National Energy Research Scientific Computing Center (NERSC) and Oak Ridge National Laboratory Research Cloud (ORC) with simulated experimental data, such as those produced at the SLAC National Accelerator Laboratory and Spallation Neutron Source (SNS). We describe the software infrastructure developed to provide privacy for computational and experimental networks. We developed algorithmic privacy across the federated system by embedding database security, computation, and communication into the federation architecture, utilizing scientific tools developed by the experimental community.

Archibald, Rick [ORNL] (ORCID:0000000245389780)↗
DOE OSTI2020

A Radiative Transfer Model for Patchy Landscapes Based on Stochastic Radiative Transfer Theory

The availability of global high-resolution land cover maps provides promising a priori knowledge for characterizing subpixel heterogeneity and improving predictions of directional reflectance of coarse-resolution pixels. Due to mutual shadowing and sheltering effects between the adjacent forest and cropland patches, the spectral nonlinear mixing of patchy ecotones is significant, especially when the sun illuminates the ecotone from the forest side with high solar zenith angle. The spectral linear mixture (SLM) approach leads to overestimation of the bidirectional reflectance factor (BRF) in the red band in the principal plane (PP), with a maximum absolute error (MAE) of 0.0063 and a maximum relative error (MRE) of 52.5%, and to underestimation in the near-infrared band in PP with an MAE of 0.0940 and an MRE of 14.5%. In a scenario with randomly distributed boundary orientations, the overestimation of SLM increases with the degree of fragmentation and the view zenith angle. We propose a Radiative Transfer model for patchy ECotones (RTEC). which improves R² from 0.61 to 0.94 in the red band of Landsat-8 directional reflectance at the validation site. The RTEC model provides an efficient and analytical approach for directional reflectance predictions over heterogeneous patchy landscapes at coarse resolution and will be used for biophysical parameter retrievals [e.g., the leaf area index (LAI)] in future applications.

Zeng, Yelu↗
DOE OSTI2020

On the Cutting of Metals: A Mechanics Viewpoint

The mechanics of large-strain deformation in cutting of metals is discussed, primarily from viewpoint of recent developments in in situ analysis of plastic flow and microstructure characterization. It is shown that a broad range of deformation parameters can be accessed in chip formation—strains of 1–10, strain rates of 10–10 5 /s, and temperatures up to 0.7T m —and controlled. This range is far wider than achievable by any other single-stage, severe plastic deformation (SPD) process. The resulting extreme deformation conditions produce a rich variety of microstructures in the chip. Four principal types of chip formation—continuous, shear-localized, segmented, and mushroom-type—as elucidated first by Nakayama (1974, “The Formation of ‘Saw-Toothed Chip’ in Metal Cutting,” Proceedings of International Conference on Production Engineering, Tokyo, pp. 572–577) are utilized to emphasize the diverse plastic flow phenomena, especially unsteady deformation modes that prevail in cutting. These chip types are intimately connected with the underlying flow, each arising from a distinct mode and triggered by an instability phenomenon. The role of plastic flow instabilities such as shear banding, buckling, and fracture in mediating unsteady flow modes is expounded, along with consequences of the flow modes and chip types for the cutting. Sinuous flow is shown to be the reason why gummy (highly strain-hardening) metals, although relatively soft, are so difficult to cut. Synthesizing the various observations, a hypothesis is put forth that it is the stability of flow modes that determines the mechanics of cutting. Furthermore, this leads to a flow-stability phase diagram that could provide a framework for predicting chip types and process attributes.

42 ENGINEERING↗
DOE OSTI2025

Recovery of postconsumer mechanically recycled polymers

Mechanical recycling plays a key role in reducing landfill bound plastics that pollute our environment. This process converts plastic waste into marketable pellets by sorting, cleaning, grinding into flakes, compounding in the molten state, and ultimately pelletizing. A primary restriction for the widescale usage of mechanical recycling is the highly variable quality and mechanical properties of the plastic waste feedstock. Degradation can occur during the plastic life cycle with the consumer, during the mechanical processing itself, or during the complex sorting process required to produce the feedstock. This study explores how rheological characterization can mitigate the batch-to-batch variability and identify a potential application for each batch. Shear and extensional rheology of “application-specific” virgin high-density polyethylene (HDPE) and virgin polypropylene (PP) was used as the control for this categorization process. Recycled HDPE and PP from three different streams were then measured and compared to the results from the control study. Rheological measurements proved to be very effective at providing sufficient differentiation to categorize the recycled polymer as suitable for different applications such as injection molding, blow molding, or thermoforming. Finally, the usage of an additional step to sort the recycled polymers by their initial use application was found to achieve a remarkably consistent recovery of application-specific material properties. Furthermore, this secondary sorting could provide significant added value for mechanically recycled polymers.

Differential scanning calorimetry↗
DOE OSTI2021

Correction for Thompson et al., “Fatty Acid and Alcohol Metabolism in Pseudomonas putida : Functional Analysis Using Random Barcode Transposon Sequencing”

Volume 86, no. 21, 2020, e01665-20, https://doi.org/10.1128/AEM.01665-20. Readers should note that when the authors created the deletion mutant of PP_2675, they deleted the entire region between the gene’s start and stop codons. However, this also deleted the DNA that codes for the first 14 amino acids of the overlapping ORF PP_2676. Additionally, the originally published URL for the JBEI public strain repository was incorrect. The correct link to all strains and plasmids in this study is https://public-registry.jbei .org/folders/641.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Functional Analysis of H + -Pumping Membrane-Bound Pyrophosphatase, ADP-Glucose Synthase, and Pyruvate Phosphate Dikinase as Pyrophosphate Sources in Clostridium thermocellum

Increased understanding of the central metabolism of C. thermocellum is important from a fundamental as well as from a sustainability and industrial perspective. In addition to showing that H + -pumping membrane-bound PPase, glycogen cycling, a Ppdk–malate shunt cycle, and acetate cycling are not significant sources of PP i supply, this study adds functional annotation of four genes and availability of an updated PP i stoichiometry from biosynthesis to the scientific domain.

Clostridium thermocellum↗
DOE OSTI2020

Threshold $\pi ^-$ photoproduction on the neutron

Recent data from the PIONS@MAX-lab Collaboration, measuring the total cross section of the incoherent pion photoproduction reaction, γd → π – pp, near threshold, have been used to extract the E 0+ multipole and total cross section of the reaction γn → π – p, also near threshold. These are the first measurements of the reaction γd → π – pp in the threshold region. The value of E 0+ is extracted through a fit to the deuteron data in a photoproduction model accounting for final-state interactions. The model takes an S-wave approximation for the elementary reaction γn → π – p with E 0+ = const in the threshold region. The fit over all the 6 deuteron data points gives the value E 0+ = –31.86 ± 0.8 (in units 10 –3 /mπ). We explore the dependence of our results on the choice of data subsets included in the fit. Here, the obtained values of E 0+ , for different subsets, have overlapping errors and agree with previous determinations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗