Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLARONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Structural behavior and thermoelectric properties of the brownmillerite system Ca{sub 2}(Zn{sub x}Fe{sub 2-x})O{sub 5}

The Ca{sub 2}(Zn{sub x}Fe{sub 2-x})O{sub 5} series was synthesized and characterized to determine the influence of zinc dopant on the brownmillerite structure for thermoelectric applications. All single-phase compounds exhibited Pnma symmetry at room temperature up to the solubility limit at x=0.10. High-temperature X-ray powder diffraction was used to show that the nature of the Pnma-Imma(0 0 {gamma})s00 transition in Ca{sub 2}Fe{sub 2}O{sub 5} is modified by the presence of zinc. While the Zn-free composition transitions to an incommensurate phase, the Zn-containing phases transition instead to a commensurate phase, Imma(0 0 {gamma})s00 with {gamma}=1/2. Both the Neel temperature and the onset temperature of the Pnma-Imma(0 0 {gamma})s00 phase transition decreased with increasing zinc concentration. Rietveld analysis of the in situ diffraction pattern for the x=0 sample at 1300 deg. C demonstrates that the structure contains statistically disordered chain orientations as described by space group Imma. Thermoelectric properties were analyzed in air from 100 to 800 deg. C. The positive Seebeck coefficient revealed hole-type conduction for all compositions. Doped samples exhibited electrical conductivities up to 3.4 S/cm and thermal conductivity of 1.5 W/mK. Transport analysis revealed thermally activated mobility consistent with polaron conduction behavior for all compositions. - Graphical Abstract: Preferential substitution by zinc for iron at the tetrahedral sites of brownmillerite dicalcium ferrite modifies the high temperature Imma(0 0 {gamma})s00 phase from incommensurate to commensurate. Highlights: > Preferential tetrahedral occupancy by zinc in brownmillerite dicalcium ferrite. > Ca{sub 2}Fe{sub 2}O{sub 5} exhibits two additional phase transitions above 1000 deg. C: a commensurately modulated Imma(0 0 {gamma})s00 phase and a statistically disordered Imma phase. > Thermal hysteresis in phase transition increased with increasing zinc. > Electrical conductivity up to 3.4 S/cm at 800 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and high-temperature properties of the (Sr,Ca,Y)(Co, Mn)O{sub 3-y} perovskites - perspective cathode materials for IT-SOFC

Oxygen deficient perovskites Sr{sub 0.75}Y{sub 0.25}Co{sub 1-x}Mn{sub x}O{sub 3-y}, x=0.5 and 0.75, were prepared by using the citrate route at 1373-1573 K for 48 h. The cubic Pm-3m perovskite structure for x=0.5 was confirmed by electron diffraction study and refined using neutron powder diffraction (NPD) data. For x=0.75, the superstructure corresponding to a={radical}(2) Multiplication-Sign a{sub per}, b=2 Multiplication-Sign a{sub per}, c={radical}(2) Multiplication-Sign a{sub per} (a{sup 0}b{sup -}b{sup -} tilt system, space group Imma) was revealed by electron diffraction. The solid solution Sr{sub 0.75-x}Ca{sub x}Y{sub 0.25}Co{sub 0.25}Mn{sub 0.75}O{sub 3-y}, 0.1{<=}x{<=}0.6 and compound Ca{sub 0.75}Y{sub 0.25}Mn{sub 0.85}Co{sub 0.15}O{sub 2.92} were prepared in air at 1573 K for 48 h. The crystal structure of Ca{sub 0.75}Y{sub 0.25}Mn{sub 0.85}Co{sub 0.15}O{sub 2.92} was refined using NPD data (S.G. Pnma, a=5.36595(4), b=7.5091(6), c=5.2992(4) A, R{sub p}=0.057, R{sub wp}=0.056, {chi}{sup 2}=4.26). High-temperature thermal expansion properties of the prepared compounds were studied in air using both dilatometry and high-temperature X-ray powder diffraction data (HTXRPD). They expanding non-linearly at 298-1073 K due to the loss of oxygen at high temperatures. Calculated average thermal expansion coefficients (TECs) for Sr{sub 0.75}Y{sub 0.25}Co{sub 1-x}Mn{sub x}O{sub 3-y}, x=0.5, 0.75 and Ca{sub 0.75}Y{sub 0.25}Mn{sub 0.85}Co{sub 0.15}O{sub 2.92(1)} are 15.5, 15.1, and 13.8 ppm K{sup -1}, respectively. Anisotropy of the thermal expansion along different unit cell axes was observed for Sr{sub 0.15}Ca{sub 0.6}Y{sub 0.25}Co{sub 0.25}Mn{sub 0.75}O{sub 3-y} and Ca{sub 0.75}Y{sub 0.25}Mn{sub 0.85}Co{sub 0.15}O{sub 2.92}. Conductivity of Sr{sub 0.75}Y{sub 0.25}Co{sub 1-x}Mn{sub x}O{sub 3-y}, x=0.5 and 0.75 increases with the temperature reaching 110 S/cm for x=0.5 and 44 S/cm for x=0.75 at 1173 K. Samples of Sr{sub 0.75-x}Ca{sub x}Y{sub 0.25}Co{sub 0.25}Mn{sub 0.75}O{sub 3-y}, 0.1{<=}y{<=}0.6 were found to be n-type conductors at room temperature with the similar temperature dependence of the conductivity and demonstrated the increase of the {sigma} value from {approx}1 to {approx}50 S/cm as the temperature increases from 300 to 1173 K. Their conductivity is described in terms of the small polaron charge transport with the activation energy (E{sub p}) increasing from 340 to 430 meV with an increase of the calcium content from x=0 to x=0.6. - Graphical abstract: The substitution of cobalt in the 314-phase Sr{sub 0.75}Y{sub 0.25}CoO{sub 2.62} by manganese leads to the formation of oxygen deficient compounds Sr{sub 0.75}Y{sub 0.25}Co{sub 1-x}Mn{sub x}O{sub 3-y}, x=0.5 and 0.75, with the cubic and orthorhombic perovskite structures. The conductivity of the x=0.5 sample (110 S/cm) at 1173 K is substantially higher in comparison with x=0.75 (44 S/cm). Together with comparable TEC values for x=0.5 (15.5 ppm K{sup -1}) and 0.75 (15.1 ppm K{sup -1}) samples this makes the former one a promising cathode material for IT-SOFC. Partial replacement of Sr by Ca in Sr{sub 0.75}Y{sub 0.25}Co{sub 0.25}Mn{sub 0.75}O{sub 3-y} leads to the formation of the solid solution with the orthorhombic perovskite structure, Sr{sub 0.75-x}Ca{sub x}Y{sub 0.25}Co{sub 0.25}Mn{sub 0.75}O{sub 3-y}, 0.1{<=}y{<=}0.6. Along with Sr{sub 0.75}Y{sub 0.25}Co{sub 0.5}Mn{sub 0.5}O{sub 3-y}, novel perovskite Ca{sub 0.75}Y{sub 0.25}Mn{sub 0.85}Co{sub 0.15}O{sub 3-y} represent promising cathode material for IT-SOFC due to low TEC value (13.8 ppm K{sup -1}) and high conductivity of 135 S/cm at 1173 K. Highlights: Black-Right-Pointing-Pointer Mn-doped 314-phases Sr{sub 0.75}Y{sub 0.25}Co{sub 1-x}Mn{sub x}O{sub 3-y}, x=0.5, 0.75 were synthesized. Black-Right-Pointing-Pointer Sr{sub 0.75-x}Ca{sub x}Y{sub 0.25}Co{sub 0.25}Mn{sub 0.75}O{sub 3-y}, x=0.1--0.6, Ca{sub 0.75}Y{sub 0.25}Mn{sub 0.85}Co{sub 0.15}O{sub 3-y} were made. Black-Right-Pointing-Pointer High-temperature conductivity properties and crystal structure were studied. Black-Right-Pointing-Pointer High-temperature thermal expansion behavior was investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, magnetic and electric transport properties of mixed-valence manganites La{sub 0.5+x}Sr{sub 1.5−x}Mn{sub 0.5}Cr{sub 0.5}O{sub 4} (x=0.1, 0.2 and 0.3)

A series of mixed-valence manganites La{sub 0.5+x}Sr{sub 1.5−x}Mn{sub 0.5}Cr{sub 0.5}O{sub 4} were synthesized by sol–gel method. Rietveld profile analysis shows that the phases crystallize with tetragonal unit cell in the space group I4/mmm. The lattice parameter c increases with increase in x while a parameter almost remains constant. The Weiss constant (θ) is positive for all the phases and found to increase with increase in x. The ferromagnetic interactions becomes more dominant with increase in x due to increase in Mn{sup 3+}–O–Mn{sup 4+} and Mn{sup 3+}–O–Cr{sup 3+} double exchange interactions. Resistivity can be described by the polaron hopping and the variable range hopping model. It was found that the transport mechanism is dominated by Mott's variable range hopping (VRH) model with a decrease of Mott localization energy with increase in x, which explains the decrease of resistivity. - Graphical abstract: Unit cell structure of La{sub 0.6}Sr{sub 1.4}Mn{sub 0.5}Cr{sub 0.5}O{sub 4}. Display Omitted Research highlights: • A series of K{sub 2}NiF{sub 4}-type compounds La{sub 0.5}+xSr{sub 1.5-x}Mn{sub 0.5}Cr{sub 0.5}O{sub 4} (x=0.1, 0.2, 0.3) have been synthesized. • The calculated tolerance factors confirms the tetragonal symmetry of the proposed phases. • The lattice parameter c increases with increase in x while a parameter almost remains constant. • The Weiss constant (θ) is positive for all the phases and found to increase with increase in x • The resistivity data has been best fitted using the Mott's variable range hopping (VRH) model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen vacancy induced by La and Fe into ZnO nanoparticles to modify ferromagnetic ordering

We reported long-range ferromagnetic interactions in La doped Zn{sub 0.95}Fe{sub 0.05}O nanoparticles that mediated through lattice defects or vacancies. Zn{sub 0.92}Fe{sub 0.05}La{sub 0.03}O (ZFLaO53) nanoparticles were synthesized by a sol–gel process. X-ray fluorescence spectrum of ZFLaO53 detects the weight percentage of Zn, Fe, La and O. X-ray diffraction shows the hexagonal Wurtzite ZnO phase. The Rietveld refinement has been used to calculate the lattice parameters and the position of Zn, Fe, La and O atoms in the Wurtzite unit cell. The average size of ZFLaO53 nanoparticles is 99 nm. The agglomeration type product due to OH ions with La results into ZnO nanoparticles than nanorods that found in pure ZnO and Zn{sub 0.95}Fe{sub 0.05}O sample. The effect of doping concentration to induce Wurtzite ZnO structure and lattice defects has been analyzed by Raman active vibrational modes. Photoluminescence spectra show an abnormal emission in both UV and visible region, and a blue shift at near band edge is formed with doping. The room temperature magnetic measurement result into weak ferromagnetism but pure ZnO is diamagnetic. However, the temperature dependent magnetic measurement using zero-field and field cooling at dc magnetizing field 500 Oe induces long-range ferromagnetic ordering. It results into antiferromagnetic Neel temperature of ZFLaO53 at around 42 K. The magnetic hysteresis is also measured at 200, 100, 50 and 10 K measurement that indicate enhancement in ferromagnetism at low temperature. Overall, the La doping into Zn{sub 0.95}Fe{sub 0.05}O results into enhanced antiferromagnetic interaction as well as lattice defects/vacancies. The role of the oxygen vacancy as the dominant defects in doped ZnO must form Bound magnetic polarons has been described. - Graphical abstract: The long-range ferromagnetic order in Zn{sub 0.92}Fe{sub 0.05}La{sub 0.03}O nanoparticles at low temperature measurements involves oxygen vacancy as the medium of magnetic interactions. - Highlights: • The La and Fe doping into ZnO nanoparticles induce defects in terms of oxygen vacancy. • The La ions in Fe substituted ZnO formed nanoparticles than nanorods. • Antiferromagnetic interactions are observed at room temperature magnetic measurement. • Rietveld analysis evaluated structural deformation in the Wurtzite ZnO lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying the sources of ferromagnetism in sol-gel synthesized Zn{sub 1−x}Co{sub x}O (0≤x≤0.10) nanoparticles

We have carefully investigated the structural, optical and electronic properties and related them with changes in the magnetism of sol-gel synthesized Zn{sub 1−x}Co{sub x}O (0≤x≤0.10) nanoparticles. Samples with x≤0.05 were free of spurious phases. Samples with x≤0.03 were found to be with only high spin Co{sup 2+} ions into ZnO structure, whereas sample with x=0.05, exhibited the presence of high spin Co{sup 2+} and low spin Co{sup 3+}. We found that the intensity of the main EPR peak associated with Co{sup 2+} varies with the nominal Co content in a similar manner as the saturation magnetization and coercive field do. These results point out that the ferromagnetism in these samples should directly be correlated with the presence of divalent cobalt ions. Bound magnetic polaron (BMP) model and the charge transfer model are insufficient to explain the ferromagnetic properties of Zn{sub 1−x}Co{sub x}O nanoparticles. The room temperature ferromagnetism (RTFM) may be originated from a combination of several factors such as the interaction of high spin Co{sup 2+} ions, perturbation/alteration and/or changes in the electronic structure of ZnO close to the valence band edge and grain boundary effects. - Graphical abstract: The intensity of the main EPR peak associated with Co{sup 2+} varies with the nominal Co content in a similar manner as the saturation magnetization and coercive field do. These results point out that the ferromagnetism in these samples should directly be correlated with the presence of Co{sup 2+} ions. Display Omitted - Highlights: • Systematic and carefully study of physical-chemical properties of Zn{sub 1−x}Co{sub x}O nanoparticles. • Samples with x=0.01 and 0.03 were found to be with only high spin Co{sup 2+}. • Sample with x=0.05, exhibited the presence of high spin Co{sup 2+} and low spin Co{sup 3+}. • The BMP and charge transfer models seem not explain the ferromagnetic properties. • RTFM: high spin Co{sup 2+} ions, defects close to the valence band and grain boundary effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding lattice defects to influence ferromagnetic order of ZnO nanoparticles by Ni, Cu, Ce ions

Future spintronics technologies based on diluted magnetic semiconductors (DMS) will rely heavily on a sound understanding of the microscopic origins of ferromagnetism in such materials. It remains unclear, however, whether the ferromagnetism in DMS is intrinsic - a precondition for spintronics - or due to dopant clustering. For this, we include a simultaneous doping from transition metal (Ni, Cu) and rare earth (Ce) ions in ZnO nanoparticles that increase the antiferromagnetic ordering to achieve high-T{sub c} ferromagnetism. Rietveld refinement of XRD patterns indicate that the dopant ions in ZnO had a wurtzite structure and the dopants, Ni{sup 2+}, Cu{sup 2+}, Ce{sup 3+} ions, are highly influenced the lattice constants to induce lattice defects. The Ni, Cu, Ce ions in ZnO have nanoparticles formation than nanorods was observed in pure sample. FTIR involve some organic groups to induce lattice defects and the metal-oxygen bonding of Zn, Ni, Cu, Ce and O atoms to confirm wurtzite structure. Raman analysis evaluates the crystalline quality, structural disorder and defects in ZnO lattice with doping. Photoluminescence spectra have strong near-band-edge emission and visible emission bands responsible for defects due to oxygen vacancies. The energy band gap is calculated using Tauc relation. Room temperature ferromagnetism has been described due to bound magnetic polarons formation with Ni{sup 2+}, Cu{sup 2+}, Ce{sup 3+} ions in ZnO via oxygen vacancies. The zero field and field cooling SQUID measurement confirm the strength of antiferromagnetism in ZnO. The field cooling magnetization is studied by Curie-Weiss law that include antiferromagnetic interactions up to low temperature. The XPS spectra have involve +3/+4 oxidation states of Ce ions to influence the observed ferromagnetism. - Graphical abstract: The lattice defects/vacancies attributed by Ni and Ce ions in the wurtzite ZnO structure are responsible in high T{sub c} -ferromagnetism due to long-range magnetic interactions with cluster and spin-glass type growth. - Highlights: • Lattice defects/vacancies attributed high T{sub c} –ferromagnetism. • Transition metal and rare earth ions deform the wurtzite ZnO lattice to induce defects. • Oxygen vacancies are more favorable than Zn with Ni, Cu, Ce into ZnO. • Defects assisted long-range ferromagnetism of doped ZnO include cluster and spin-glass growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ growth of ceramic quantum dots in polyaniline host via water vapor flow diffusion as potential electrode materials for energy applications

In situ preparation of polyaniline-ceramic nanocomposites has recently demonstrated that the electrical properties are highly improved with respect to the typical ex situ preparations. In this report, we present for the first time, to the best of our knowledge, the in situ growth of titanium oxide quantum dots in polyaniline host via water vapor flow diffusion as an easily adaptable route to prepare other ceramic-polymer nanocomposites. The main relevance of this method is the possibility to prepare ceramic quantum dots from alkoxide precursors using water vapor flow into any hydrophobic polymer host and to achieve good homogeneity and size-control. In addition, we perform full characterization by means of high-resolution transmission electron microscopy, X-ray powder diffraction, small angle X-ray scattering, thermogravimetric and calorimetric analyses, confocal Raman microscopy and impedance spectroscopy analyses. The presence of the polymer host and interparticle Coulomb repulsive interactions was evaluated as an influence for the formation of ~3–8 nm equally-sized quantum dots independently of the concentration. The polyaniline polaron population showed an increase for the quantum dots diluted regime and the suppression at the concentrated regime, ascribed to the formation of chemical bonds at the interface, which was confirmed by theoretical simulations. In agreement with the previous observation, the in situ growth of ceramic quantum dots in polyaniline host via water vapor flow diffusion could be very useful as a novel approach to prepare electrode materials for energy conversion and storage applications. - Highlights: • In situ growth of titanium oxide quantum dots in polyaniline host via water vapor flow diffusion. • Polyaniline charge carriers at the interface and charge interactions between quantum dots. • Easy extrapolation to sol-gel derived quantum dots into polymer host as potential electrode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modification of the physical properties of semiconducting MgAl{sub 2}O{sub 4} by doping with a binary mixture of Co and Zn ions

Graphical abstract: Plot of (Co,Zn) content against normalized values of crystallite size, X-ray density and the dielectric constant. Highlights: Black-Right-Pointing-Pointer Co and Zn ions doped MgAl{sub 2}O{sub 4} nanomaterials. Black-Right-Pointing-Pointer Materials show better thermal stability in the temperature range of 298-1773 K. Black-Right-Pointing-Pointer High resistivity, high dielectric constant and loss observed in the doped materials. Black-Right-Pointing-Pointer Thermal conductivity and diffusivity are lowered and heat capacity is increased. Black-Right-Pointing-Pointer Three spin allowed electronic transitions of Co{sup 2+} at tetrahedral lattice sites. -- Abstract: The effects of doping of MgAl{sub 2}O{sub 4} by a binary mixture of Co and Zn ions on the absorbance, electrical resistivity, capacitance, thermal conductivity, heat capacity and thermal diffusivity are reported in this paper. The materials with the nominal composition Mg{sub 1-2x}(Co,Zn){sub x}Al{sub 2}O{sub 4} (x = 0.0-0.5) are synthesized by solution combustion synthesis assisted by microwave irradiation. The substituted spinels are produced with a Scherrer crystallite size of 18-23 nm, as opposed to 45 nm for undoped samples, indicated by X-ray diffraction and confirmed by transmission electron microscopy. These materials also show better thermal stability in the temperature range of 298-1773 K. Three strong absorption bands at 536, 577 and 630 nm are observed for the doped samples which are attributed to the three spin allowed ({sup 4}A{sub 2} (F) {yields} {sup 4}T{sub 1} (P)) electronic transitions of Co{sup 2+} at tetrahedral lattice sites while pure magnesium aluminate remains transparent in the whole spectral range. The semiconducting behavior of the materials is evident from the temperature dependence of the electrical resistivity. Resistivity and activation energy are higher for the substituted samples. Fitting of the resistivity data is achieved according to the hopping polaron model of solids. Both dielectric constant and loss increase on account of doping. The dielectric data are explained on the basis of space charge polarization. The thermal conductivity and diffusivity are lowered and the heat capacity is increased in the doped materials. Wiedemann-Franz's law is used to compute the electronic and lattice contributions towards the total thermal conductivity.

36 MATERIALS SCIENCE↗

Physical and optical properties of Co{sup 2+}, Ni{sup 2+} doped 20ZnO + xLi{sub 2}O + (30 − x)K{sub 2}O + 50B{sub 2}O{sub 3} (5 ≤ x ≤ 25) glasses: Observation of mixed alkali effect

Graphical abstract: Composition dependence of density and Urbach energy of Co{sup 2+} and Ni{sup 2+} doped ZLKB glasses: (a) Co{sup 2+} doped glasses and (b) Ni{sup 2+} doped glasses. Both are exhibited mixed alkali effect. Highlights: ► Mixed alkali effect is observed. ► Band gap studies indicate that the glasses are structural stable. ► The glasses are observed to be partially covalent in nature. -- Abstract: Co{sup 2+} and Ni{sup 2+} ions doped 20ZnO + xLi{sub 2}O + (30 − x) K{sub 2}O + 50B{sub 2}O{sub 3} (5 ≤ x ≤ 25) mol% glasses are prepared using melt quenching technique. Structural changes of the prepared glasses by addition of transition metal oxides, CoO and NiO are investigated by UV–vis–NIR, FT-IR spectroscopy and XRD. The XRD pattern indicates the amorphous nature of prepared glasses. FT-IR measurements of the all glasses revealed that the network structure of the glasses are mainly based on BO{sub 3} and BO{sub 4} units placed in different structural groups in which the BO{sub 3} units being dominant. The optical absorption spectra suggest the site symmetry of Co{sup 2+} and Ni{sup 2+} ions in the glasses are near octahedral. Crystal field and inter-electronic repulsion parameters are also evaluated. The optical band gap and Urbach energies exhibited the mixed alkali effect. Various physical parameters such as density, refractive index, optical dielectric constant, polaron radius, electronic polarizability and inter-ionic distance are also determined.

36 MATERIALS SCIENCE↗

Electrical properties and scaling behaviour of rare earth based Ho{sub 2}CoZrO{sub 6} double perovskite ceramics

Graphical abstract: The X-ray diffraction analysis suggests that the compound crystallizes in monoclinic phase at room temperature with β = 108.51 ± 0.021° (a = 8.1858 ± 0.0023 Å, b = 5.2599 ± 0.0027 Å, c = 7.9874 ± 0.0031 Å) and cell volume = 324.17 Å{sup 3}. The SEM image indicates the uniformity of the grains in the samples. The grain size of the microstructure of HCZ is found to be ∼0.48 μm on average. Display Omitted Highlights: ► The conduction mechanism in HCZ may be due to hopping of small polaron. ► The material shows semiconducting behaviour. ► Conductivity obeys Jonscher's power law with high frequency dispersion. ► Both long-range and localized relaxation are present. -- Abstract: The Ho{sub 2}CoZrO{sub 6} (HCZ) double perovskite has been prepared in polycrystalline form by solid state reaction technique. The analysis of the X-ray powder diffraction pattern indicates that the crystal structure is monoclinic at room temperature with cell parameters a = 8.1858 ± 0.0023 Å, b = 5.2599 ± 0.0027 Å, c = 7.9874 ± 0.0031 Å and β = 108.51 ± 0.021°. The compound shows significant frequency dispersion in its dielectric properties. The Cole–Cole model is used to determine the polydispersive nature of dielectric relaxation. The scaling behaviour of dielectric loss and imaginary electric modulus suggest that the relaxation describe same mechanism at various temperatures. Impedance data presented in the Nyquist plot (Z″ versus Z′) are used to identify an equivalent circuit and to know the bulk and interface contributions. The complex impedance analysis of HCZ exhibits the appearance of both the grain and the grain-boundary contribution. The frequency dependent conductivity spectra follow the universal power law. The magnitude of the activation energy indicates that the carrier transport is due to the hopping conduction.

36 MATERIALS SCIENCE↗

Microstructure characterization and electrical transport of nanocrystalline ZrO{sub 2}–CeO{sub 2} solid solution

Graphical abstract: - Highlights: • Monoclinic ZrO{sub 2} phase has been changed to cubic ZrO{sub 2} phase within a short milling. • Conductivity increases due to change of phase from monoclinic to cubic. • A maximum has been observed in the s–T curve. • A transformation from −ve to +ve ac magnetoconductance has been observed. - Abstract: Nanocrystalline ZrO{sub 2}–CeO{sub 2} (ZC) solid solution is synthesized by high energy ball-milling the powder mixture of monoclinic (m) ZrO{sub 2}–10 mol% CeO{sub 2} in air medium. X-ray powder diffraction (XRD) patterns show that the method IS effective to synthesize cubic (c) ZrO{sub 2} phase within a short milling time. Formation mechanism, structural and microstructural changes of different phases and relative phase abundances have been estimated by Rietveld analysis of XRD patterns. The dc conductivity has been enhanced due to monoclinic to cubic phase transformation. A transformation from small polaron hopping to correlated barrier hoping has been observed from the of temperature dependence frequency exponent study. A crossover from negative to positive ac magnetoconductance has been observed at temperature T = 280 K and 230 K for unmilled (ZC0H) and 8 h (ZC8H) milled samples, respectively.

36 MATERIALS SCIENCE↗

Effect of Fe and Co doping on electrical and thermal properties of La{sub 0.5}Ce{sub 0.5}Mn{sub 1−x}(Fe, Co){sub x}O{sub 3} manganites

Graphical abstract: - Highlights: • Low temperature resistivity minimum contributes to Coulomb and Kondo scattering. • Metallic resistivity shows electron, magnon and phonon scattering are significant. • At high temperatures small polaron conduction mechanism is viable. • Susceptibility measurements show ferromagnetic–paramagnetic transition. - Abstract: The effect of Fe and Co doping on structural, electrical and thermal properties of half doped La{sub 0.5}Ce{sub 0.5}Mn{sub 1−x}(Fe, Co){sub x}O{sub 3} is investigated. The structure of these crystallizes in to orthorhombically distorted perovskite structure. The electrical resistivity of La{sub 0.5}Ce{sub 0.5}MnO{sub 3} exhibits metal-semiconductor transition (T{sub MS} at ∼225 K). However, La{sub 0.5}Ce{sub 0.5}Mn{sub 1−x}TM{sub x}O{sub 3} (TM = Fe, Co; 0.0 ≤ x ≤ 0.1) manganites show semiconducting behavior. The thermopower measurements infer hole as charge carriers and electron–magnon as well spin wave fluctuation mechanism are effective at low temperature domain and SPC model fits the observed data at high temperature. The magnetic susceptibility measurement confirms a transition from paramagnetic to ferromagnetic phase. The observed peaks in the specific heat measurements, shifts to lower temperatures and becomes progressively broader with doping of transition metals on Mn-site. The thermal conductivity is measured in the temperature range of 10–350 K with a magnitude in between 10 and 80 mW/cm K.

36 MATERIALS SCIENCE↗

Effect of Eu–Ni substitution on electrical and dielectric properties of Co–Sr–Y-type hexagonal ferrite

Graphical abstract: - Highlights: • Single phase nanostructured Sr{sub 2}Co{sub 2−x}Ni{sub x} Eu{sub y}Fe{sub 12−y}O{sub 22} were synthesized by the microemulsion method. • The materials show semiconducting behavior. • The high resistivity makes these materials useful for high frequency applications. • The Curie temperature decreases with the substituents. - Abstract: Single phase nanostructured Eu–Ni substituted Y-type hexaferrites with nominal composition Sr{sub 2}Co{sub 2−x}Ni{sub x} Eu{sub y}Fe{sub 12−y}O{sub 22} (x = 0.0–1, y = 0.0–0.1) were synthesized by the normal microemulsion method. X-ray diffraction (XRD) technique was employed for phase analysis and indexing of each pattern corroborates that well defined Y-type crystalline phase is formed. It is observed that DC resistivity enhanced which is accredited to room temperature resistivity differences of dopant and host ions. The hopping of electrons and jumping of holes are responsible for conduction below Curie temperature (T{sub C}), whereas above Curie temperature is due to polaron hopping. The decrease in T{sub C} may be due to the fact that Eu–Fe interactions on the B sites are weaker than Fe–Fe interaction. The dispersion in the dielectric constant ε′(f) favor the occurrence of peaks in the tan δ(f). The extraordinary values of resistivity and small dielectric loss make these materials pre-eminent contestant for high frequency applications.

36 MATERIALS SCIENCE↗

The role of cobalt doping on magnetic and optical properties of indium oxide nanostructured thin film prepared by sol–gel method

Highlights: • Cobalt doped indium oxide thin films have been prepared by a sol–gel method. • The films have a thickness less than 100 nm and grain size less than 10 nm. • The lattice parameters and grain size of films decrease as Co content increase. • The optical band gap of films increases as the grain size decrease. • The films' magnetic behaviour is sensitive to ratio of oxygen defects per Co ions. - Abstract: The effect of Co doping concentration, (x = 0.025–0.2), in In{sub 2−x}Co{sub x}O{sub 3} thin film was investigated by X-rays diffraction (XRD), transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), Ultraviolet visible spectrophotometer (UV–vis) and vibrating sample magnetometer (VSM). All films were prepared by sol–gel technique followed by spin coating process. The XRD and XPS measurements indicate that Co{sup +2} has been successfully substituted in In{sup +3} site. The TEM measurement shows nanostructure morphology of the films. The doping of Co in indium oxide resulted in a decrease in the lattice parameters and grain size while the band gap increased with increasing Co concentration. Further, by comparing VSM and XPS results, the magnetic behaviour of the films were found to be sensitive to Co concentrations, oxygen vacancies and ratio of oxygen defects to Co concentrations. The magnetic behaviour of the prepared films was explained using bound magnetic polaron (BMP) model.

36 MATERIALS SCIENCE↗

Effect of Ni content on the structural, morphological and magnetic properties of spray deposited Ni–Zn ferrite thin films

Graphical abstract: The Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} (where x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) thin films were prepared by spray pyrolysis technique onto the quartz substrates. The composition x = 0.4 shows the formation of the compact grain structure and highest saturation magnetization of 143 emu/cm{sup 3}. - Highlights: • Synthesis of nanocrystalline Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} thin films. • Influence of Ni substitution on physicochemical properties. • Electrical conductivity arises mainly from the grain boundary. • The highest saturation magnetization is 143 emu/cm{sup 3} for x = 0.4. - Abstract: The Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} thin films have been prepared using a simple spray pyrolysis technique. The X-ray diffraction studies reveal that, the films are polycrystalline with spinel structure. The lattice parameters vary in the range of 8.35–8.48 Å with composition (x) obeying Vegard’s rule. SEM and AFM studies show that the surface of the films exhibit a smooth, compact and a pin hole free morphology. Raman spectra indicate first order Raman active modes; A{sub 1g} (λ = 334 cm{sup −1}); E{sub g} (λ = 148 cm{sup −1}) and T{sub 2g} (λ = 699) of the Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4}. The investigation on dielectric constant, dielectric loss tangent and ac conductivity was carried out in the frequency range 20 Hz–1 MHz at room temperature. The linear nature of the AC conductivity shows small polaron type of hopping mechanism. The saturation magnetization increases up to x = 0.4 (143 emu/cm{sup 3}), which decreases for higher x.

36 MATERIALS SCIENCE↗

Electrical conduction mechanism of LaNi{sub x}Me{sub 1−x}O{sub 3−δ} (Me = Fe, Mn)

Graphical abstract: Compositional dependence of (a) electrical conductivity and (b) E{sub a} for hopping conduction of LaNi{sub x}Me{sub 1−x}O{sub 3} (Me = Fe, Mn). - Highlights: • Electrical conduction mechanism of LaNi{sub x}Me{sub 1−x}O{sub 3} (Me = Fe, Mn) was investigated. • Hopping conduction model could be applied for conductivity of both specimens. • The difference of E{sub a} due to that of energy level of Fe and Mn was observed. • Hole concentration estimated by iodimetry increases with increasing Ni content. - Abstract: Electrical conduction mechanism of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} expected as Sr-free new cathode material for solid oxide fuel cells was analyzed. Electrical conduction behaviors of both specimens could be well fitted by small polaron hopping conduction model. The electrical conductivity of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} increased with increasing Ni content, showing agreement with decrease of activation energy for hopping conduction. The decrease of electrical conductivity and increase of activation energy of LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} were observed with increasing Ni content for 0.0 ≤ x ≤ 0.4. Further Ni substitution increased electrical conductivity and decreased activation energy for 0.4 ≤ x ≤ 0.6. It was revealed using iodometry that the difference of hole carrier density between LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1−x}O{sub 3+δ} was small. It was suspected that the origin of the difference of electrical conduction behavior of LaNi{sub x}Fe{sub 1−x}O{sub 3−δ} and LaNi{sub x}Mn{sub 1-x}O{sub 3+δ} was difference of energy level of e{sub g} band composed of Fe 3d or Mn 3d orbitals and their overlapping quantity with O 2p and Ni 3d band.

36 MATERIALS SCIENCE↗

Investigating charge generation in polymer:non-fullerene acceptor bulk heterojunction films

Non-fullerene acceptors are now capable of being used in high efficiency bulk heterojunction (BHJ) donor-acceptor organic solar cells. Acceptors comprising single or multiple linked chromophores have been used. We have developed a new non-fullerene molecular acceptor as well as two non-polymeric macromolecular materials that contain four equivalents of a similar chromophore, but can adopt different spatial arrangements of the chromophores. We compare the effect of having single and multiple chromophores within a macromolecule on the charge generation processes in P3HT:non-fullerene acceptor BHJ films using Transient Absorption Spectroscopy (TAS) and Time Resolved Microwave Conductivity (TRMC) measurements. It was found from the TAS measurements that at low weight percent (5 wt%) the single chromophore formed more polarons than the acceptors in which chromophores were linked, due to it having a more even distribution within the film. At higher concentrations (50 wt%) the trend was reversed due to the single chromophore forming crystalline domains, which reduced the interface area with the P3HT donor. The TRMC measurements showed that more mobile carriers were formed in the macromolecular acceptors when used at low concentrations in the blend and, independent of concentration, mobile carriers had a longer lifetime when compared to films containing the molecular material, which we ascribe to the charges being able to sample more than one chromophore and thus reduce recombination events.

14 SOLAR ENERGY↗

Atomic-layer engineering of nickelates (in search of novel superconductors)

Karl Alex Mueller's intuition was that the nature of mobile charge carriers in manganates and nickelates should be like those in cuprates, which he believed were Jahn-Teller polarons, so he expected them to also host high-temperature superconductivity (HTS). Following his suggestions and persuasion, in the past, we performed several experiments that included atomic-layer-by-layer synthesis of novel, metastable manganates and nickelates. Despite our efforts and several USO sightings, here we failed to find any reproducible superconductivity and dropped the project fifteen years ago. Our results are presented here, for the first time - timely, since HTS was very recently discovered in nickelates (under pressure). So, whether his opinions were on the mark or not, Alex did guess it right - again.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗