Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA ELECTRODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Generation of Large-Volume High-Pressure Plasma by Spatio-Temporal Control of Space Charge

Due to the fundamental limitations of scaling, very little progress has been made towards achieving a large-volume dense non-equilibrium plasma near atmospheric pressures. Commercially available state-of-the art glow-like atmospheric plasma devices for industrial applications are either narrow tubes or wide slits with narrow openings. Often multiple sources are put together in various configurations to process larger surfaces. The traditional methods of exciting electrodes create spatially fixed electric fields. As a result, the space charge at atmospheric pressure tends to be spatially confined resulting in non-uniformity which eventually leads to instability as the discharge is scaled. Theoretical work done under this project showed that it is possible to generate a spatially rotating electric field by exciting a set of electrodes with phase staggered sinusoidal waveforms. The modeling and simulations were done using plasma fluid models. It was shown that such a field can produce a uniform plasma. At the conclusion of the project, experimental proof of concept with an eight-electrode system in various gases (Air, Helium and Argon) was demonstrated. Power measurements and spectral investigation show that the concept can be used to generate a uniform stable plasma. This plasma source has the potential of opening new applications of nonthermal plasma including combustion of carbon-free fuel. The current limitation of the proposed method in scaling to higher volume and pressure is the need for multiple high voltage amplifiers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Development of Discharge in a Saline Solution at Near-Threshold Voltages

The development of a discharge in a point−plane gap filled with a saline solution with a salt content of 3% was studied experimentally. The duration of the voltage pulse applied to the gap was about 2 ms. Data are presented on the formation dynamics of gas microcavities at near-threshold voltages at which gas-discharge plasma appears in some microcavities. The cavities are conglomerates of microbubbles with a typical size of ≈100 μm. At the threshold voltage (≈750 V), the active electrode is covered with a gas layer and the gap voltage is in fact applied to this layer, which leads to the development of discharges in individual microbubbles. In this case, the discharge operates in the form of short current pulses. The number of microcavities filled with plasma increases as the voltage grows above the threshold value. At the plasma boundary, new microbubbles are formed, in which discharges are ignited. As a result, the plasma front propagates from the active electrode into the gap with a characteristic velocity of 10{sup 3} cm/s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Ferroelectric Al 1− x B x N sputtered thin films on n -type Si bottom electrodes

Ferroelectric Al 1−x B x N thin films are grown on highly doped and plasma treated (100) n-type Si. We demonstrate ferroelectricity for x = < 0.01, 0.02, 0.06, 0.08, 0.13, and 0.17 where the n-type Si is both the substrate and bottom electrode. Polarization hysteresis reveals remanent polarization values between 130 and 140 μC/cm 2 and coercive field values as low as 4 MV/cm at 1 Hz with low leakage. The highest resistivity and most saturating hysteresis occurs with B contents between x = 0.06 and 0.13. We also demonstrate the impact of substrate plasma treatment time on Al 1−x B x N crystallinity and switching. Cross-sectional transmission electron microscopy and electron energy loss spectra reveal an amorphous 3.5 nm SiN x layer at the Al 1−x B x N interface post-plasma treatment and deposition. The first ~ 5 nm of Al 1−x B x N is crystallographically defective. Using the n-type Si substrate, we demonstrate Al 1−x B x N thickness scaling to 25 nm via low-frequency hysteresis and CV. Serving as the bottom electrode and substrate, the n-type Si enables a streamlined growth process for Al 1−x B x N for a wide range of Al 1−x B x N compositions and layer thicknesses.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Measurement of the edge plasma rotation on J-TEXT tokamak

A multi-channel high resolution spectrometer was developed for the measurement of the edge plasma rotation on J-TEXT tokamak. With the design of two opposite viewing directions, the poloidal and toroidal rotations can be measured simultaneously, and velocity accuracy is up to 1 km/s. The photon flux was enhanced by utilizing combined optical fiber. With this design, the time resolution reaches 3 ms. An assistant software “Spectra Assist” was developed for implementing the spectrometer control and data analysis automatically. A multi-channel monochromatic analyzer is designed to get the location of chosen ions simultaneously through the inversion analysis. Some preliminary experimental results about influence of plasma density, different magnetohydrodynamics behaviors, and applying of biased electrode are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2003

Developing Antimatter Containment Technology: Modeling Charged Particle Oscillations in a Penning-Malmberg Trap

The NASA MSFC Propulsion Research Center (PRC) is conducting a research activity examining the storage of low energy antiprotons. The High Performance Antiproton Trap (HiPAT) is an electromagnetic system (Penning-Malmberg design) consisting of a 4 Tesla superconductor, a high voltage confinement electrode system, and an ultra high vacuum test section; designed with an ultimate goal of maintaining charged particles with a half-life of 18 days. Currently, this system is being experimentally evaluated using normal matter ions which are cheap to produce and relatively easy to handle and provide a good indication of overall trap behavior, with the exception of assessing annihilation losses. Computational particle-in-cell plasma modeling using the XOOPIC code is supplementing the experiments. Differing electrode voltage configurations are employed to contain charged particles, typically using flat, modified flat and harmonic potential wells. Ion cloud oscillation frequencies are obtained experimentally by amplification of signals induced on the electrodes by the particle motions. XOOPIC simulations show that for given electrode voltage configurations, the calculated charged particle oscillation frequencies are close to experimental measurements. As a two-dimensional axisymmetric code, XOOPIC cannot model azimuthal plasma variations, such as those induced by radio-frequency (RF) modulation of the central quadrupole electrode in experiments designed to enhance ion cloud containment. However, XOOPIC can model analytically varying electric potential boundary conditions and particle velocity initial conditions. Application of these conditions produces ion cloud axial and radial oscillation frequency modes of interest in achieving the goal of optimizing HiPAT for reliable containment of antiprotons.

Chakrabarti, S.↗
DOE OSTI2015

Effect of secondary emission on the argon plasma afterglow with large dust density

A zero-dimensional, space-averaged model for argon plasma afterglow with large dust density is developed. In the model, three groups of electrons in the plasma afterglow are assumed: (i) thermal electrons with Maxwellian distribution, (ii) energetic electrons generated by metastable-metastable collisions (metastable pooling), and (iii) secondary electrons generated at collisions of ions with the electrodes, which have sufficiently large negative voltages in the afterglow. The model calculates the time-dependencies for electron densities in plasma afterglow based on experimental decay times for metastable density and electrode bias. The effect of secondary emission on electron density in the afterglow is estimated by varying secondary emission yields. It is found that this effect is less important than metastable pooling. The case of dust-free plasma afterglow is considered also, and it is found that in the afterglow the effect of secondary emission may be more important than metastable pooling. The secondary emission may increase thermal electron density n{sub e} in dust-free and dusty plasma afterglows on a few ten percentages. The calculated time dependencies for n{sub e} in dust-free and dusty plasma afterglows describe well the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1994

Coaxial microwave electrothermal thruster performance in hydrogen

The microwave electro thermal thruster (MET) is an electric propulsion concept that offers the promise of high performance combined with a long lifetime. A unique feature of this electric propulsion concept is its ability to create a microwave plasma discharge separated or floating away from any electrodes or enclosing walls. This allows propellant temperatures that are higher than those in resistojets and reduces electrode and wall erosion. It has been demonstrated that microwave energy is coupled into discharges very efficiently at high input power levels. As a result of these advantages, the MET concept has been identified as a future high power electric propulsion possibility. Recently, two additional improvements have been made to the coaxial MET. The first was concerned with improving the microwave matching. Previous experiments were conducted with 10-30 percent reflected power when incident power was in excess of 600 W(exp 6). Power was reflected back to the generator because the impedance of the MET did not match the 50 ohm impedance of the microwave circuit. To solve this problem, a double stub tuning system has been inserted between the MET and the microwave power supply. The addition of the double stub tuners reduces the reflected power below 1 percent. The other improvement has prepared the coaxial MET for hydrogen experiments. To operate with hydrogen, the vacuum window which separates the coaxial line from the discharge chamber has been changed from teflon to boron nitride. All the microwave energy delivered to the plasma discharge passes through this vacuum window. This material change had caused problems in the past because of the increased microwave reflection coefficients associated with the electrical properties of boron nitride. However, by making the boron nitride window electrically one-half of a wavelength long, power reflection in the window has been eliminated. This technical note summarizes the experimental performance of the improved coaxial MET when operating in nitrogen, helium, and hydrogen gases.

Richardson, W.↗
DOE OSTI2012

New detection system and signal processing for the tokamak ISTTOK heavy ion beam diagnostic

The tokamak ISTTOK heavy ion beam diagnostic (HIBD) operates with a multiple cell array detector (MCAD) that allows for the plasma density and the plasma density fluctuations measurements simultaneously at different sampling volumes across the plasma. To improve the capability of the plasma density fluctuations investigations, a new detection system and new signal conditioning amplifier have been designed and tested. The improvements in MCAD design are presented which allow for nearly complete suppression of the spurious plasma background signal by applying a biasing potential onto special electrodes incorporated into MCAD. The new low cost and small size transimpedance amplifiers are described with the parameters of 400 kHz, 10{sup 7} V/A, 0.4 nA of RMS noise, adequate for the plasma density fluctuations measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1997

Electric Arc and Electrochemical Surface Texturing Technologies

Surface texturing of conductive materials can readily be accomplished by means of a moving electric arc which produces a plasma from the environmental gases as well as from the vaporized substrate and arc electrode materials. As the arc is forced to move across the substrate surface, a condensate from the plasma re-deposits an extremely rough surface which is intimately mixed and attached to the substrate material. The arc textured surfaces produce greatly enhanced thermal emittance and hold potential for use as high temperature radiator surfaces in space, as well as in systems which use radiative heat dissipation such as computer assisted tomography (CAT) scan systems. Electrochemical texturing of titanium alloys can be accomplished by using sodium chloride solutions along with ultrasonic agitation to produce a random distribution of craters on the surface. The crater size and density can be controlled to produce surface craters appropriately sized for direct bone in-growth of orthopaedic implants. Electric arc texturing and electrochemical texturing techniques, surface properties and potential applications will be presented.

Banks, Bruce A.↗
DOE OSTI2016

The impact of ultra-thin titania interlayers on open circuit voltage and carrier lifetime in thin film solar cells

We study the effects of modifying indium tin oxide electrodes with ultrathin titania (TiO 2 ) layers grown via plasma-enhanced atomic layer deposition (PE-ALD). We find an optimal thickness of PE-ALD-grown titania by tracking performance, which initially increases, peaks, and eventually decreases with increasing TiO 2 thickness. We use scanning Kelvin probe microscopy (SKPM) to measure both the local work function and its distribution as a function of TiO 2 thickness. We find that the variance in contact potential difference across the surface of the film is related to either the amorphous or anatase TiO 2 form. Finally, we use local SKPM recombination rate experiments, supported by bulk transient photovoltage and charge extraction measurements. Here, we show that the optimum TiO 2 thickness is the one for which the carrier lifetime is the longest and the charge carrier density is the highest, when the TiO 2 is amorphous, in agreement with the device measurements.

14 SOLAR ENERGY↗
DOE OSTI2017

A nonlinear electromagnetics model of an asymmetrically-driven, low pressure capacitive discharge

It is well-known that standing waves having radially center-high voltage profiles exist in high frequency driven capacitive discharges. Capacitive sheaths can also nonlinearly excite driving frequency harmonics near the series resonance that can be spatially near-resonant, and therefore enhance the on-axis power deposition. The powered-electrode/plasma/grounded-electrode sandwich structure of an asymmetrically excited cylindrical discharge forms a three electrode system in which both z-symmetric and z-antisymmetric radially propagating wave modes can exist. We develop a nonlinear electromagnetics model for this system with radially- and time-varying sheath widths, incorporating both symmetric and antisymmetric modes, and the plasma skin effect. Waves generated in the electrostatic wave limit are also treated. The discharge is modeled as a uniform density bulk plasma with either homogeneous or Child law sheaths at the electrodes, incorporating their nonlinear voltage versus charge relations. The model includes a finite power source resistance and a self-consistent calculation of the dc bias voltages. The resulting set of nonlinear partial differential equations is solved numerically to determine the symmetric and antisymmetric mode amplitudes and the nonlinearly-excited radially-varying harmonics. Two examples driven at lower frequency (30 MHz) or at higher frequency (60 MHz) are examined. The first case displays the excited dominant ninth harmonic near the series resonance frequency with the fundamental frequency having a weak standing wave. The higher frequency case shows a more obvious standing wave effect, enhanced by the nonlinear harmonics. Finally, the symmetric and antisymmetric modes are of similar amplitudes over the driving electrode, summing to give a larger bottom sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

High-impedance wire grid method to study spatiotemporal behavior of hot electron clump generated in a plasma

High-impedance Wire Grid (HIWG) detector has been developed to study spatiotemporal behavior of a hot electron clump generated in an electron cyclotron resonance (ECR) plasma. By measuring the floating potentials of the wire electrodes, and generating structure matrix made of geometrical means of the floating potentials, the HIWG detector reconstructs the spatial distribution of high-temperature electron clump at an arbitrary instant of time. Time slices of the spike event in floating potential revealed the growth and decay process of a hot spot occurs in an ECR plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Study of the interrelation between the electrotechnical parameters of the plasma focus discharge circuit and the plasma compression dynamics on the PF-3 and PF-1000 facilities

The main stages of the plasma current sheath (PCS) dynamics on two plasma focus (PF) facilities with different geometries of the electrode system, PF-3 (Filippov type) and PF-1000 (Mather type), were studied by analyzing the results of the current and voltage measurements. Some dynamic characteristics, such as the PCS velocity in the acceleration phase in the Mather-type facility (PF-1000), the moment at which the PCS reaches the anode end, and the plasma velocity in the radial stage of plasma compression in the PF-3 Filippov-type facility, were determined from the time dependence of the inductance of the discharge circuit with a dynamic plasma load. The energy characteristics of the discharge circuit of the compressing PCS were studied for different working gases (deuterium, argon, and neon) at initial pressures of 1.5–3 Torr in discharges with energies of 0.3–0.6 MJ. In experiments with deuterium, correlation between the neutron yield and the electromagnetic energy deposited directly in the compressed PCS was investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Pressure and current effects on the thermal efficiency of an MPD arc used as a plasma source

Measurements of arc voltage and energy loss to the cooled electrodes of a magnetoplasmadynamic (MPD) arc, operating without an applied magnetic field, were made at chamber pressures of 26 to 950 torr, argon mass flow rates of 0.08 to 44 g/s and current of 200 to 2000 A. The resulting arc thermal efficiency varied from 22% at a chamber pressure of 26 torr to 88% at 950 torr. Thermal efficiency was only weakly dependent on arc current. It is concluded that the MPD arc operating without an applied magnetic field and at higher pressure than normally used in thruster applications is a reliable and efficient steady-state plasma source.

Pivirotto, T. J.↗
DOE OSTI2018

Numerical investigation of nanosecond pulsed discharge in air at above-atmospheric pressures

Here, this paper focuses on the multi-dimensional simulation of non-equilibrium plasma generated by nanosecond pulsed discharge in air, at pressure values higher than atmospheric. Voltage profiles and electrode geometry closely match those from a complementary experimental study. Simulations highlight the transition between different post-discharge plasma regimes at increasing pressure and tie the characteristics of the streamers to the electric field distribution in the gap between the electrodes. Results from simulations match experimental observations and qualitatively capture the experimental trend in terms of regime transition pressure and structure of the streamers. As a result, this paper validates a numerical tool that captures the physical and chemical properties of the low-temperature plasma and contributes to expand the understanding of low-temperature plasma ignition processes.

42 ENGINEERING↗
NASA NTRS2004

Grid Sphere Electrodes used for Current Collection at the Positive Pole of Electrodynamic Tethers

The generation of either electrical power or propulsive thrust with an electrodynamic tether system necessarily depends on driving a return current through the system's ambient space plasma environment. An electrical connection is, therefore, required between the plasma and each end of the tether. The voltage required to drive current through the system is derived either from the orbital motion of the conducting tether through the magnetic field of the Earth, or from a high-voltage power supply that taps into an external energy source (e.g., the sun). In either case, one end of the tether will receive a positive bias. This positive bias, between the tether and the ambient plasma, allows electrons to be collected effectively with a simple, passive electrode. Passive electrode contactors offer several important advantages, including simplification of the upper end-body design and operations, minimization of system mass, and an increase of system reliability and robustness. A preliminary analysis of an inflatable Grid-Sphere end-body concept is presented that is interesting because of the potential for collecting arbitrarily large currents independent of tether length, while the device has the physical characteristics of a high area-to-mass ratio, a low drag coefficient, and simplicity. In particular, we will discuss the physics of current collection by a biased Grid-Sphere and the present state-of-the-art of materials, attainable area-to-mass ratios, and deployment techniques.

Stone, N. H.↗
DOE OSTI2017

Fully Implict Magneto-hydrodynamics Simulations of Coaxial Plasma Accelerators

The resistive Magneto-Hydrodynamic (MHD) model describes the behavior of a strongly ionized plasma in the presence of external electric and magnetic fields. We developed a fully implicit MHD simulation tool to solve the resistive MHD governing equations in the context of a cell-centered finite-volume scheme. The primary objective of this study is to use the fully-implicit algorithm to obtain insights into the plasma acceleration and jet formation processes in Coaxial Plasma accelerators; electromagnetic acceleration devices that utilize self-induced magnetic fields to accelerate thermal plasmas to large velocities. We also carry out plasma-surface simulations in order to study the impact interactions when these high velocity plasma jets impinge on target material surfaces. Scaling studies are carried out to establish some basic functional relationships between the target-stagnation conditions and the current discharged between the coaxial electrodes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗