Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Low-temperature sintering behavior of nanocrystalline indium tin oxide prepared from polymer-containing sols

Highlights: Black-Right-Pointing-Pointer The synthesis of ITO powders and thin films from PVP-containing sols is presented. Black-Right-Pointing-Pointer The nano- and microstructures of ITO are more compact when PVP is used. Black-Right-Pointing-Pointer PVP acts both as a steric stabilizer of the sol and as a pre-sintering agent. Black-Right-Pointing-Pointer The PVP-induced enhanced sintering results in ITO with lower electrical resistance. Black-Right-Pointing-Pointer The surface composition of the ITO films is independent of the initial PVP content. -- Abstract: Indium tin hydroxide (ITH) xerogel powders and thin films with different polyvinylpyrrolidone (PVP) contents (0-22%, w/w) were prepared by a classical sol-gel method. To obtain nanocrystalline indium tin oxide (ITO), the ITH xerogels were calcined at 550 Degree-Sign C. The effect of the initial polymer content on the structure of the ITO powders was studied by means of N{sub 2}-sorption measurements, small-angle X-ray scattering (SAXS), transmission and scanning electron microscopy. The N{sub 2}-sorption measurements revealed that the ITO powders obtained contained micropores and both their porosity and specific surface area decreased with increasing PVP content of the ITH xerogels. The SAXS measurements confirmed the enhanced sintering of the particles in the presence of PVP. The calculated mass fractal dimensions of the ITO powders increased significantly, indicating a significant compaction in structure. The pre-sintered structure could be achieved at relatively low temperature, which induced a significant decreasing (three orders of magnitude) in the electrical resistance of the ITO films.

36 MATERIALS SCIENCE↗

Metal Adsorption Controls Stability of Layered Manganese Oxides

Hexagonal birnessite, a typical layered Mn oxide (LMO), can adsorb and oxidize Mn(II) and thereby transform to Mn(III)-rich hexagonal birnessite, triclinic birnessite, and/or tunneled Mn oxides (TMOs), remarkably changing the environmental behavior of Mn oxides. We have determined the effects of co-existing cations on the transformation by incubating Mn(II)-bearing δ-MnO 2 at pH 8 under anoxic conditions for 25 d (dissolved Mn < 11 μM). In the Li + , Na + or K + chloride solution, the Mn(II)-bearing δ-MnO 2 first transforms to Mn(III)-rich δ-MnO 2 and/or triclinic birnessite (T-bir) due to the Mn(II)-Mn(IV) comproportionation, most of which eventually transform to a 4 × 4 TMO. In contrast, Mn(III)-rich δ-MnO 2 and T-bir form and persist in the Mg 2+ or Ca 2+ chloride solution. Yet, in the presence of surface adsorbed Cu(II), Mn(II)-bearing δ-MnO 2 turns into Mn(III)-rich δ-MnO 2 without forming T-bir or TMOs. The stabilizing power of the cations on the δ-MnO 2 structure positively correlates with their binding strength to δ-MnO 2 (Li + , Na + or K + < Mg 2+ or Ca 2+ < Cu(II)). Since metal adsorption decreases the surface energy of minerals, our result suggests that the surface energy largely controls the thermodynamic stability of LMOs. Our study implies that the adsorption of divalent metal cations, particularly transition metals, can be a prime cause of the high abundance of LMOs, rather than the more stable TMO phases, in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical origins of current and temperature controlled negative differential resistances in NbO 2

Negative differential resistance behavior in oxide memristors, especially those using NbO 2 , is gaining renewed interest because of its potential utility in neuromorphic computing. However, there has been a decade-long controversy over whether the negative differential resistance is caused by a relatively low-temperature non-linear transport mechanism or a high-temperature Mott transition. Resolving this issue will enable consistent and robust predictive modeling of this phenomenon for different applications. Here in this paper, we examine NbO 2 memristors that exhibit both a current-controlled and a temperature-controlled negative differential resistance. Through thermal and chemical spectromicroscopy and numerical simulations, we confirm that the former is caused by a ~400 K non-linear-transport-driven instability and the latter is caused by the ~1000 K Mott metal-insulator transition, for which the thermal conductance counter-intuitively decreases in the metallic state relative to the insulating state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid assessment of structural and compositional changes during early stages of zirconium alloy oxidation

A multimodal chemical imaging approach has been developed and applied to detail the dynamic, atomic-scale changes associated with oxidation of a zirconium alloy (Zircaloy-4). Scanning transmission electron microscopy, a gas-phase reactor chamber attached to an atom probe tomography instrument, and synchrotron-based X-ray absorption near-edge spectroscopy were employed to reveal morphology, composition, crystal, and electronic structure changes that occur during initial stages of oxidation at 300 °C. Oxidation was carried out in 10 mbar O 2 gas for short exposure times of 1 and 5 min. A multilayered oxide film with a cubic ZrO adjacent to the oxide/metal interface, a nanoscopic transition region with a graded composition of ZrO 2-x (where 0 < x < 1), and tetragonal ZrO 2 in the outermost oxide were formed. Partitioning of the major alloying element (tin) to the oxide/metal interface and heterogeneously within the oxide accompanied the development of the layered oxide. Our work provides a rapid, high-throughput approach for detailed characterisation of initial stages of zirconium alloy oxidation at an accelerated time scale, with implications for several other alloy systems.

36 MATERIALS SCIENCE↗

Thermal Behavior Study of the MoVTeNb Oxide Catalyst for Selective Oxidation Process

Several parameters involved in preparing the multi metal oxide (MMO) catalysts (Mo{sub 1}V{sub 0.3}Te{sub 0.23}Nb{sub 0.12}O{sub x}) for selective oxidation of propane to acrylic acid (AA) were investigated. These included the proper pre-calcined and calcinations atmosphere effect on the performance of the catalysts. It was found that each metal element plays a critical role to the performance of an effective catalyst and also the calcinations under a non-flow inert atmosphere. The characterization results from XRD, SEM, TG and DSC show the important differences depending on the activation procedures of the MoVTeNb oxide catalyst. The XRD analysis is used to identify the phase inventory of the MoVTeNb oxide catalysts. The structure of orthorhombic M1, M2, TeMo{sub 5}O{sub 16}, V{sub 0.95}Mo{sub 0.97}O{sub 5} and Mo{sub 5}O{sub 14} phase was investigated. The orthorhombic M1 phase is the most active and selective phase and is responsible for the major of the efficiently of the best catalyst for selective oxidation process. TGA and DTG allow the identification of the number and types, of reactions involving evaporation of small molecules from removal of ligands and water to condensation or drying processes. From all these analyses it was proven that the activation procedures would affect the performance of the MoVTeNb oxide catalyst.

36 MATERIALS SCIENCE↗

Energy deficit of pulsed-laser field-ionized and field-emitted ions from non-metallic nano-tips

The energy deficit of pulsed-laser field-evaporated ions and field-ionized atoms of an inert gas from the surface of a non-metallic nano-metric tip is reported as a function of the laser intensity, ion current, and temperature. A new model is proposed to explain these results, taking into account the resistive properties of non-metallic nano-tips. A good agreement between the theoretical predictions and the experimental results is obtained for all parameters investigated experimentally. This model is also used to discuss the evaporation behavior of oxides analyzed in laser-assisted atom probe tomography. New insight into the contribution of the electrostatic field and the laser illumination on the evaporation process of non-metallic materials is given.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THz behavior of indium-tin-oxide films on p-Si substrates

This paper reports broadband THz free-space transmission measurements and modeling of indium-tin-oxide (ITO) thin films on p-doped Si substrates. Two such samples having ITO thickness of 50 and 100 nm, and DC sheet conductance 260 and 56 Ω/sq, respectively, were characterized between 0.2 and 1.2 THz using a frequency-domain spectrometer. The 50-nm-film sample displayed very flat transmittance over the 1-THz bandwidth, suggesting it is close to the critical THz sheet conductance that suppresses multi-pass interference in the substrate. An accurate transmission-line-based equivalent circuit is developed to explain the effect, and then used to show that the net reflectivity and absorptivity necessarily oscillate with frequency. This has important implications for the use of thin-film metallic coupling layers on THz components and devices, such as detectors and sources. Consistent with previous reported results, the sheet conductance that best fits the THz transmittance data is roughly 50% higher than the DC values for both samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical and experimental study of the structural stability of TbPO[subscript 4] at high pressures

We have performed a theoretical and experimental study of the structural stability of terbium phosphate at high pressures. Theoretical ab initio total-energy and lattice-dynamics calculations together with x-ray diffraction experiments have allowed us to completely characterize a phase transition at {approx}9.8 GPa from the zircon to the monazite structure. Furthermore, total-energy calculations have been performed to check the relative stability of 17 candidate structures at different pressures and allow us to propose the zircon {yields} monazite {yields} scheelite {yields} SrUO{sub 4}-type sequence of stable structures with increasing pressure. In this sequence, sixfold P coordination is attained for the SrUO{sub 4}-type structure above 64 GPa. The whole sequence of transitions is discussed in association with the high-pressure structural behavior of oxides isomorphic to TbPO{sub 4}.

36 MATERIALS SCIENCE↗

Local Electronic And Dielectric Properties at Nanosized Interfaces (Final Report)

The behavior of grain boundaries and interfaces has been a focus of fundamental research for decades because variations of structure and composition at interfaces dictate mechanical, electrical, optical and dielectric properties in solids. Similarly, the consequence of atomic and electronic structures of surfaces to chemical and physical interactions are critical due to their implications to catalysis and device fabrication. Increasing fundamental understanding of surfaces and interfaces has materially advanced technologies that directly bear on energy considerations. Currently, exciting developments in materials processing are enabling creative new electrical, optical and chemical device configurations. Controlled synthesis of nanoparticles, semiconducting nanowires and nanorods, optical quantum dots, etc. along with a range of strategies for assembling and patterning nanostructures portend the viability of new devices that have the potential to significantly impact the energy landscape. As devices become smaller the impact of interfaces and surfaces grows geometrically. As with other nanoscale phenomena, small interfaces do not exhibit the same properties as do large interfaces. The size dependence of interface properties had not been explored and understanding at the most fundamental level is necessary to the advancement of nanostructured devices. An equally important factor in the behavior of interfaces in devices is the ability to examine the interfaces under realistic conditions. For example, interfaces and boundaries dictate the behavior of oxide fuel cells which operate at extremely high temperatures in dynamic high pressure chemical environments. These conditions preclude the characterization of local properties during fuel cell operation. The objective of this research was to determine the size and interface atomic structure dependence of the electronic properties of metal/oxide interfaces using model materials systems of noble metals on SrTiO 3 surfaces; and to develop experimental techniques to probe spatially localized properties under extreme conditions. The outcomes of this research summarized in more detail below include; Discovery of the presence of multiple size dependent transport mechanisms at nanoscale interfaces and determination of the critical size parameter associated with a transition from one to another; Determination of the effect of interface atomic structure and electronic structure at nanoscale interfaces on electronic transport across the interfaces, in particular the role of states associated with under coordinated cations enabling resonant tunneling and/or band bending; Discovery and characterization of size dependent resistive switching at nanoscale interfaces; These advances required the development of a process to produce nanosized contacts with controlled interface orientation over sizes (diameters) ranging from 20-500nm and the determination of the mechanical and electrical parameters for robust and accurate measurement of frequency dependent properties of nanoscale interfaces; Invention of a chamber that enables in situ scanning probe microscopy and spectroscopy at high temperature and reactive gas environments; and First measurement of interface properties in an operating solid oxide fuel cell, quantifying the local electrical potentials and energies associated with two reaction mechanisms.

36 MATERIALS SCIENCE↗

Chemical Analysis of Tantalum Thin Films compared to Niobium Thin Films using SIMS and XPS

Superconducting qubits are a leading platform for quantum computation. These circuits are typically made from superconducting materials like aluminum or niobium. However, the amorphous niobium oxide and aluminum oxide on the surface of these circuits introduce considerable RF loss due to the presence of two-level systems (TLS), which limits the maximum coherence times T1 to ~100 μs. Capping the niobium qubits with a tantalum layer leads to a 3- 5x improvement [Bal et al., 2024]. But even in this case, tantalum forms an amorphous surface oxide that introduces loss. In an effort to devise strategies to eliminate the presence of this oxide, we present a comprehensive study on the nature of Ta oxide using x-ray photoemission spectroscopy (XPS) and secondary ion mass spectrometry (ToF-SIMS) as a function of heat treatment. The thin films were annealed in ultra-high vacuum conditions and analyzed in situ to characterize the composition and evolution of the native tantalum oxide layer and oxide-metal interface. Our analysis reveals two critical differences between tantalum and niobium oxides: Nb2O5 completely dissolves at 400°C, while Ta2O5 persists even at 800°C. Additionally, tantalum oxide contains only a single suboxide (TaO), in contrast to niobium's two suboxides (NbO and NbO2). The suboxide of tantalum contributes minimally to the total oxide content and shows a relative increase with temperature. Understanding the oxide’s behavior will open new pathways for optimizing coherence times in tantalum qubits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the physical basis of a theory of human thermoregulation.

Theoretical study of the physical factors which are responsible for thermoregulation in nude resting humans in a physical steady state. The behavior of oxidative metabolism, evaporative and convective thermal fluxes, fluid heat transfer, internal and surface temperatures, and evaporative phase transitions is studied by physiological/physical modeling techniques. The modeling is based on the theories that the body has a vital core with autothermoregulation, that the vital core contracts longitudinally, that the temperature of peripheral regions and extremities decreases towards the ambient, and that a significant portion of the evaporative heat may be lost underneath the skin. A theoretical basis is derived for a consistent modeling of steady-state thermoregulation on the basis of these theories.

Iberall, A. S.↗

Mechanisms of devitrification of grain boundary glassy phases in Si3N4 materials

Changes in the grain boundary (g.b.) phases of Si3N4 are analyzed, the effects of composition and thermal history on devitrification of the g.b. phases are determined, devitrification of the g.b. phases of Si3N are related to mechanical behavior and oxidation sensitivity of the material. The phase relationships that occur within the grain boundaries of Si3N4 containing various densification aids are reviewed. Comparisons of the effects of MgO, Y2O3, CeO2, and Y2O3 + AL2O3 are made in terms of the phase equilibria of the Si3N4 + SiO2 + additive compositional system. Two new equilibrium phase diagrams for the Si3N4-SiO2 and Y2O3 and Si3N4-SiO2-Ce2O3 systems are preented. The effects of Y2O3 vs CeO2 densification aids on the fracture surfaces of Si3N4 are compared. Auger electron spectroscopy shows that both oxides are concentrated within the fracture surface. Scanning electron microscopy shows evidence that Si3N4 with CeO2 formed an intergranular structure of fine grained oxynitride reaction products, as predicted by phase quilibria, whereas the Y2O3 containing sample shows evidence of an intergranular glassy phase.

Hench, L. L.↗

A potentiodynamic study of aluminum-lithium alloys in an aqueous sodium chloride environment

The characteristics of the potentiodynamic curves for Al-Li alloys in 3.5 percent NaCl aqueous solution are explained and the electrochemical parameters of the potentiodynamic technique are correlated to observed pitting and intergranular cracking behavior. It is shown that the oxygen content of the sodium chloride electrolyte plays an important role in the electrochemical behavior of Al-Li alloys. The potentiodynamic behavior of the alloys is found to be insensitive to variation in compositional content and heat treatment, both of which affect the stress-corrosion behavior. Stringer oxide particle attack and random pitting are observed. It is shown that alternate-immersion exposure prior to potentiodynamic polarization may offer a means of assessing susceptibility to stress-corrosion cracking.

Tsao, C.-H. T.↗

Exploration of Particle Size Engineering and Microencapsulation Technologies for Multifunctional Applications

There is a critical need for high performance materials for functional and space-based applications, including tires for exploratory rovers and external structures for landing vehicles. Novel ternary borides, such as iron aluminum boride (Fe2AlB2) and molybdenum aluminum boride (MoAlB), have emerged as potential materials for such application owing to their hardness, mechanical behavior and oxidation resistance. In this poster presentation, we will present different methods of fabricating these particles and engineering them for additive manufacturing and other related manufacturing practices. As an integral component of this study, we will demonstrate technologies to (a) synthesize these particles and (b) microencapsulate these particles with bioplastics like polylactic acid (PLA). The resulting particles will be evaluated for their processability as coatings on hydroxyapatite and Inconel particles using microstructural and flowability studies. It is expected that these particles can be used for 3D printing.

ceramics↗