Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Optimization of the optical properties of nanostructured silicon surfaces for solar cell applications

Surface nanostructuration is an important challenge for the optimization of light trapping in solar cell. We present simulations on both the optical properties and the efficiency of micro pillars—MPs—or nanocones—NCs—silicon based solar cells together with measurements on their associated optical absorption. We address the simulation using the Finite Difference Time Domain method, well-adapted to deal with a periodic set of nanostructures. We study the effect of the period, the bottom diameter, the top diameter, and the height of the MPs or NCs on the efficiency, assuming that one absorbed photon induces one exciton. This allows us to give a kind of abacus involving all the geometrical parameters of the nanostructured surface with regard to the efficiency of the associated solar cell. We also show that for a given ratio of the diameter over the period, the best efficiency is obtained for small diameters. For small lengths, MPs are extended to NCs by changing the angle between the bottom surface and the vertical face of the MPs. The best efficiency is obtained for an angle of the order of 70°. Finally, nanostructures have been processed and allow comparing experimental results with simulations. In every case, a good agreement is found.

30 DIRECT ENERGY CONVERSION↗

Studies on optical properties of Si220 nanoclusters via time-dependent density functional theory calculations

The optical properties of bare and hydrogen passivated Si220 nanoclusters(NCs) in four typical motifs(i.e., bulk-like, onion-like, bucky-diamond and icosahedral motifs) were studied via time-dependent density functional theory(TD-DFT) calculations. The calculation results show that there is a significant blue shift in the optical absorption spectra when the Si NCs are passivated with hydrogen. A strong absorption peak in the visible light region appears for the hydrogenated bulk-like, onion-like and bucky-diamond Si NCs.

Yang, Wenhua↗

Effect of H{sup +} implantation on the optical properties of semi-insulating GaAs crystals in the IR spectral region

The optical properties of semi-insulating GaAs crystals subjected to multienergy hydrogen-ion implantation and treatment in a high-frequency electromagnetic field are studied in the infrared spectral region. It is established that such combined treatment provides a means for substantially increasing the transmittance of GaAs crystals to values characteristic of crystals of high optical quality. On the basis of analysis of the infrared transmittance and reflectance data, Raman spectroscopy data, and atomic-force microscopy data on the surface morphology of the crystals, a physical model is proposed to interpret the effects experimentally observed in the crystals. The model takes into account the interaction of radiation defects with the initial structural defects in the crystals as well as the effect of compensation of defect centers by hydrogen during high-frequency treatment.

36 MATERIALS SCIENCE↗

The morphology, electron structure, and optical properties of self-assembled silicon nanostructures on the surface of highly oriented pyrolytic graphite

The results of studies of the morphology, electronic structure, and optical properties of self-assembled silicon nanostructures on the surface of highly oriented pyrolytic graphite are reported. The structures are fabricated by electron-beam-assisted evaporation in high-vacuum conditions. It is found that, at thicknesses of about one monolayer, the atomic structure of the layer is similar to that of graphene with the interatomic spacing {approx}2.4 A. At film thicknesses larger than one monolayer, clusters about 5 nm in dimensions are formed on the substrate surface.

36 MATERIALS SCIENCE↗

Biophysical mechanisms of modification of skin optical properties in the UV wavelength range with nanoparticles

In this paper, by means of the Mie theory and Monte Carlo simulations we investigate modification of optical properties of the superficial layer of human skin (stratum corneum) for 310- and 400-nm ultraviolet (UV) radiation by embedding of 35-200-nm-sized particles of titanium dioxide (TiO{sub 2}) and silicon (Si). Problem of skin protection against UV light is of major importance due to increased frequency of skin cancer provoked by excessive doses of accepted UV radiation. For 310-nm light, the optimal sizes of the TiO{sub 2} and Si particles are found to be 62 and 55 nm, respectively, and for 400-nm radiation, 122 and 70 nm, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Two noncentrosymmetric polyphosphates featuring infinite one-dimensional (PO{sub 3}){sub ∞} chain, LiMP{sub 2}O{sub 6} (M = Rb, Cs): Synthesis, structure and optical properties

Highlights: • The crystal structure of two noncentrosymmetric LiMP{sub 2}O{sub 6} (M = Rb, Cs) is described in detail. • The linear and nonlinear optical properties for them were characterized firstly. • Band structures and density of states for them have been calculated firstly. - Abstract: Two noncentrosymmetric polyphosphates, namely LiCsP{sub 2}O{sub 6} and LiRbP{sub 2}O{sub 6} have been synthesized from the high temperature solution. The structural analysis suggests that both of them crystallize in orthorhombic space group Fdd2 (No.43), with lattice parameters: a = 18.517(4) Å, b = 19.037(4) Å, c = 13.011(3) Å, and Z = 32 for LiRbP{sub 2}O{sub 6,} while a = 19.009(13) Å, b = 19.402(13) Å, c = 13.180(9) Å, and Z = 32 for LiCsP{sub 2}O{sub 6}. In the structure, the PO{sub 4} polyhedra are connected through corner-sharing to form 1D infinite (PO{sub 3}) {sub ∞} chains stretching along the c axis, which are further linked by the LiO{sub 4} polyhedra to construct a 3D framework with two types of tunnels. And the Rb/Cs atoms are filled in or around the periphery of the tunnels to keep the charge equilibrium. The IR spectra verify their structural validity. In addition, other characterizations including the UV−vis−NIR diffuse reflectance spectra, as well as first-principles theoretical studies have been performed on the two compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical Properties of Bismuth Germanate (BGO)

The optical dielectric function of bismuth germanate Bi4Ge3O12 has been measured using spectroscopic ellipsometry and optical transmission. Analysis near the direct band edge indicates that there are at least three critical points at 4.44 low intensity and at 4.75 and 4.91 high intensity. Using transmission measurements, the band gap is determined to be 4.20 eV, which is likely determined by the defects in the material. Comparisons are made with relativistic electronic structure and optical calculations based on the Engel Vosko generalized gradient approximation. The near-absorption-edge critical points are associated with spin-orbit-split bands which significantly modify the conduction bands.

36 MATERIALS SCIENCE↗

Thermo-Optical Properties of Lunar Dust Simulants

Lunar dust coverage can significantly impact the thermo-optical properties of external surfaces for spacecraft and systems operating in the Lunar orbit or on the Lunar surface. This impacts the thermal control of these vehicles. Testing must be done to determine how much surface optics are affected by varying levels of lunar dust coverage. Optics and Particle Size Distributions (PSDs) of the dust simulant used in these tests are critical to the results. Many lunar dust simulants are available for testing, but their thermooptical properties are not well characterized. To resolve this unknown, 13 different lunar dust simulants’ IR emissivity and solar absorptivity were measured and are presented with their PSDs here.

lunar dust↗

Thermo-Optical Properties of Lunar Dust Simulants

Lunar dust coverage can significantly impact the thermo-optical properties of external surfaces for spacecraft and systems operating in the Lunar orbit or on the Lunar surface. This impacts the thermal control of these vehicles. Testing must be done to determine how much surface optics are affected by varying levels of lunar dust coverage. Optics and Particle Size Distributions (PSDs) of the dust simulant used in these tests are critical to the results. Many lunar dust simulants are available for testing, but their thermooptical properties are not well characterized. To resolve this unknown, 13 different lunar dust simulants’ IR emissivity and solar absorptivity were measured and are presented with their PSDs here.

lunar dust↗

Structural, electronic and optical properties of armchair silicon nanotube of chirality (6,6)

First principle calculations based on density functional theory have been used to study the structural, electronic and optical properties of infinite armchair (6,6) silicon nanotube. The cohesive energy of the studied SiNT has been found to be 4.45 eV/atom in comparison to cohesive energy 5.22 eV/atom of its bulk counterpart. Contrary to some published results in literature, the SiNT with (6,6) chirality does not appear to have zero band gap semiconductor since it shows band gap of 0.18 eV. Also the absorption egde of SiNT shifts towards the lower energy as compared to bulk and lies in the infrared region, as a consequence of decrease in dimensionality.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical properties of silver, silver sulfide and silver selenide nanoparticles and antibacterial applications

Highlights: • Ag small nanoparticles synthesis in zeolite A4. • SERS effect in Ag small nanoparticles. • Bactericidal properties in Ag{sub 2}Se and Ag{sub 2}S semiconductor nanoparticles. - Abstract: This work presents the optical properties and antibacterial activity of silver nanoparticles (AgNPs) and their semiconductors from S and Se (Ag{sub 2}S and Ag{sub 2}Se nanoparticles). The nanoparticles were synthesized and stabilized in the matrix of the synthetic zeolite A4. Both compounds Ag{sub 2}S and Ag{sub 2}Se nanoparticles show a size of around 9 nm and quasi-spherical morphology. The interplanar distances calculated in the TEM images confirm the presence of metallic and semiconductor nanoparticles with hexagonal, monoclinic and orthorhombic structures for nanoparticles Ag, Ag{sub 2}S and Ag{sub 2}Se, respectively. The Surface plasmon resonance for AgNPs was obtained around 415 nm. Furthermore, in nanoparticles Ag{sub 2}S and Ag{sub 2}Se we identified absorptions bands in the visible region with maxima around 330 and 375 nm. The presence of SERS effect caused by metallic nanoparticles on the surface of the zeolite was observed. The antibacterial activity of the nanoparticles stabilized in the zeolite was analyzed against gram-negative bacteria and gram-positive bacteria.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

One-pot synthesis of silica-hybridized Ag{sub 2}S–CuS nanocomposites with tunable nonlinear optical properties

Highlights: • Silica modified QDs of CuS and Ag{sub 2}S is developed at room temperature. • Formation of Ag{sub 2}S/CuS nanocomposites is confirmed from XRD and FFT of HRTEM images. • The concentration dependent growth of silica modified QDs is discussed. • Nonlinear absorption observed in ns excitations is dominated by SA and ESA. • Tuning of optical limiting efficiency is achieved with relative Ag{sub 2}S content. - Abstract: In the present work we report a simple, facile route developed for preparing silica hybridized copper sulfide and silver sulfide quantum dots at room temperature. By adjusting the concentration of the precursors, Ag{sub 2}S can form Ag{sub 2}S–CuS nanocomposites which are self regulated in one pot. Their crystalline, structural and optical properties have been investigated in detail, and the optical limiting nature is studied from fluence-dependent transmittance measurements employing short (5 ns) laser pulses at 532 nm. Ag{sub 2}S nanoparticles are found to have large third order nonlinear optical coefficients with a relatively lower optical limiting threshold of 1.7 J cm{sup −2}, while the nonlinearity of the nanocomposites is found to lie in between that of Ag{sub 2}S and CuS nanoparticles. These results suggest pathways for designing good quality optical limiters with tunable optical limiting efficiencies by varying the constituent nanocrystal compositions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Non‐Linear Optical Properties of the ( RE ) 3 CuGeS 7 Family of Compounds

Abstract Non‐linear optical materials must possess a balanced combination of laser‐induced damage threshold (LDT) and second‐harmonic generation (SHG) and be phase matchable. In our previous work, chiral and polar La 3 CuGeS 7 was identified as a promising non‐linear optical material. Herein, we report the optimization of non‐linear optical properties through replacement of La with smaller lanthanides. It is determined that Gd 3 CuGeS 7 exhibits the best combination of SHG (1.6× AgGaS 2 at 88–105 μm particle size) and LDT (3× AgGaS 2 , 89 MW/cm 2 ) and is phase matchable. Based on changes in metal‐sulfur bond lengths and angles, we further propose structural optimization through solid‐solution formation and doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ZnO thin film deposition using colliding plasma plumes and single plasma plume: Structural and optical properties

We report the comparative study on synthesis of thin films of ZnO on glass substrates using IR laser ablated colliding plasma plumes and conventional pulsed laser deposition using 355 nm in oxygen ambient. The optical properties of deposited films are characterized using optical transmission in the UV-visible range of spectrum and photoluminescence measurements. X-ray diffraction and atomic force microscopy are used to investigate the surface morphology of synthesized ZnO films. The films synthesized using colliding plumes created with 1064 nm are non-polar a-plane ZnO with transmission in UV-visible (300–800 nm) region ∼60% compared to polycrystalline thin film deposited using single plume which has chunk deposition and poor optical response. However, deposition with 355 nm single plume shows polar c-axis oriented thin film with average roughness (∼thickness) of ∼86 nm (∼850 nm) compared to ∼2 nm (∼3 μm) for 1064 nm colliding plumes. These observed differences in the quality and properties of thin films are attributed to the flux of mono-energetic plasma species with almost uniform kinetic energy and higher thermal velocity reaching the substrate from interaction/stagnation zone of colliding plasma plumes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Te addition into As{sub 2}Se{sub 3} thin film: Optical property study by FTIR and XPS

In the present work, we report the effect of Te deposition onto As{sub 2}Se{sub 3} film which affects the optical properties. The Te/As{sub 2}Se{sub 3} film was illuminated with 532 nm laser to study the photo induced diffusion. The prepared As{sub 2}Se{sub 3}, Te/As{sub 2}Se{sub 3} films were characterized by X-ray diffraction which show a completely amorphous nature. On the basis of optical transmission data carried out by Fourier Transform infrared Spectroscopy, a non direct transition was found for these films. The optical bandgap is found to be decreased with Te deposition and photo darkening phenomena is observed for the diffused film. The change in the optical constants are also supported by the corresponding change in different types of bonds which are being analyzed by X-ray photoelectron spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of metal impurities on the optical properties of polyethylene in the warm dense-matter regime

For the warm dense-matter regime, we have examined the effects on the equation of state, conductivity, and optical properties of the introduction of a metal impurity (Al) into a poorly conducting mixture (CH{sub 2}) by means of quantum molecular-dynamics simulations employing temperature-dependent density-functional theory for temperatures between 1 and 4 eV and densities from ambient solid to a few times compressed. The properties such as dc conductivity and Rosseland mean opacity exhibit significant departures from the pure CH{sub 2} results only for metal concentrations above about 50%. The system is representative of a wide range of environments that include planetary interiors, inertial confinement fusion capsules, and laser-produced plasmas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ag@ZnO core-shell nanoparticles study by first principle: The structural, magnetic and optical properties

Ag@ZnO core-shell nanoparticles of around 72 atoms have been investigated by the density functional theory, revealing proving for the first time that the core-shell structure exhibits a shrinkage phenomenon from outer shell in agreement with the other studies in literatures. Our calculations predict that the Ag@ZnO core-shell structure is a ferromagnetic spin polarized state, and the magnetism mainly stems from the spin splitting of 2p electrons of O atoms. In addition, the total and partial DOS of Ag@ZnO indicate that the nanostructure is a half-metallic nanoparticle and has the characters of the p-type semiconductor. Furthermore, the optical properties calculations show that the absorption edge of Ag@ZnO have a red shift and good photocatalysis compare to that of the bulk ZnO. These results of the Ag@ZnO core-shell structure obtain a well agreement with the experimental measurement. - Graphical abstract: Geometric structure of (a) Ag@ZnO core-shell nanostructure; (b) the core of Ag; (c) the shell of ZnO The core-shell nanoparticle Ag@ZnO contains Ag inner core of radius of 4 Å and ZnO outer shell with thickness of 2 Å. Ag@ZnO core-shell nanoparticles of around 72 atoms have been proved for the first time that the core-shell structure exhibit a shrinkage phenomenon from outer shell. Our calculations predict that the Ag@ZnO core-shell structure is a half-metallic nanoparticle and has the characters of the p-type semiconductor. The absorption edge of Ag@ZnO have a red shift and get good photo-catalysis compare to that of the bulk ZnO.

36 MATERIALS SCIENCE↗

Study of optical properties of X-ray sources

A report is presented of R and D of the optical properties of X-ray sources. The topics discussed include: (1) simultaneous optical and X-ray observations; (2) coronal line search in cygnus loop; (3) Her X-1=HZ Her observations; (4) Cyg X-1 observations; and (5) Sco X-1 radio companion observations.

Vandenbout, P. A.↗