SEARCH · Engineering Papers

Results for “Modeling of Metal AM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

NASA NTRS1994

The distribution of neutral hydrogen in the interstellar medium. 1: The data

We compile, from the existing literature, the largest sample to date (842 data points) of hydrogen column density measurements, N(H I), of the gas in the interstellar medium. We include only results obtained from absorption measurements toward individual stars (594 in our sample) in an effort to construct a three-dimensional picture of the interstellar gas. We derive hydrogen column densities toward a fraction of the stars in the sample from published column density measurements of metal ions. A three-dimensional physical model derived from this data set will be presented in a companion paper. The observed stars span distances from a few parsecs to a few thousand parsecs, and more than half of the sample serves to describe the local interstellar medium within a few hundred parsecs of the Sun. Hydrogen column densities range from 10(exp 17) to 10(exp 22)/sq cm. We describe here the various observational methods used to estimate the hydrogen column densities and present the table with the stellar and hydrogen column density data. The provided table is intended as a global reference work, not to introduce new results.

Fruscione, Antonella↗

NASA NTRS1995

Rototranslational collision-induced absorption by H2-H2 pairs at temperatures from 600 to 7000 K

The computation of the far-infrared, rototranslational (RT) collision-induced absorption (CIA) spectra of H2-H2 pairs is presented at temperatures from 600 to 7000 K for the first time. Theoretical results are based on the quantum mechanical and semiclassical, three lowest translational spectral moments obtained for H2 pairs. The effective, isotropic H2-H2 interaction potential, suitable for the high-temperature computations, and the ab initio induced dipoles, have been used as input. Special effort has been made to account for the rotational and vibrational states dependence of the dipoles, since it was found to be relevant at the high temperatures employed. The computations of the entire RT band account for all populated vibrational states of hydrogen molecule and include vibrational transitions v tends towards v-prime = v, with v = 0, 1, 2 and 3. The described method makes use of the adequately selected model line shapes with the temperature-dependent parameters. The presented model is useful for the 'model atmospheres' of zero- and low-metallicity, cool and dense stellar atmospheres, where CIA is known to be imporatnt.

Zheng, Chunguang↗

NASA NTRS1999

Weld Pool Stability in the Flat Position

The Soft Plasma Arc (SPA) process was devised to avoid interactions between backshield and full penetration mode plasma jet in welding 2195 aluminum-lithium alloy. Occasional sudden and mysterious losses in penetration were encountered in flat position SPA welding. To understand what was happening a model of the dynamics of the molten metal meniscus at the root of the weld was worked out. When the power input to the weld P(sub in) exceeds the power leakage P(sub out) the difference in power is absorbed by an increase in the molten weld pool volume V, Rho X L(SUB m) X (d(V)/dt)) = P(sub in) - P(sub out) where rho is the density and L(sub m) the specific heat of the weld metal.

Nunes, A. C., Jr.↗

NASA NTRS2003

Implementation of an Associative Flow Rule Including Hydrostatic Stress Effects Into the High Strain Rate Deformation Analysis of Polymer Matrix Composites

A previously developed analytical formulation has been modified in order to more accurately account for the effects of hydrostatic stresses on the nonlinear, strain rate dependent deformation of polymer matrix composites. State variable constitutive equations originally developed for metals have been modified in order to model the nonlinear, strain rate dependent deformation of polymeric materials. To account for the effects of hydrostatic stresses, which are significant in polymers, the classical J2 plasticity theory definitions of effective stress and effective inelastic strain, along with the equations used to compute the components of the inelastic strain rate tensor, are appropriately modified. To verify the revised formulation, the shear and tensile deformation of two representative polymers are computed across a wide range of strain rates. Results computed using the developed constitutive equations correlate well with experimental data. The polymer constitutive equations are implemented within a strength of materials based micromechanics method to predict the nonlinear, strain rate dependent deformation of polymer matrix composites. The composite mechanics are verified by analyzing the deformation of a representative polymer matrix composite for several fiber orientation angles across a variety of strain rates. The computed values compare well to experimentally obtained results.

Goldberg, Robert K.↗

NASA NTRS1993

Advances in Studies of Electrode Kinetics and Mass Transport in AMTEC Cells (abstract)

Previous work reported from JPL has included characterization of electrode kinetics and alkali atom transport from electrodes including Mo, W, WRh(sub x), WPt(sub x)(Mn), in sodium AMTEC cells and vapor exposure cells, and Mo in potassium vapor exposure cells. These studies were generally performed in cells with small area electrodes (about 1 to 5 cm(sup 2)), and device geometry had little effect on transport. Alkali diffusion coefficients through these electrodes have been characterized, and approximate surface diffusion coefficients derived in cases of activated transport. A basic model of electrode kinetic at the alkali metal vapor/porous metal electrode/alkali beta'-alumina solid electrolyte three phase boundary has been proposed which accounts for electrochemical reaction rates with a collision frequency near the three phase boundary and tunneling from the porous electrode partially covered with adsorbed alkali metal atoms. The small electrode effect in AMTEC cells has been discussed in several papers, but quantitative investigations have described only the overall effect and the important contribution of electrolyte resistance. The quantitative characterization of transport losses in cells with large area electrodes has been limited to simulations of large area electrode effects, or characterization of transport losses from large area electrodes with significant longitudinal temperature gradients. This paper describes new investigations of electrochemical kinetics and transport, particularily with WPt(sub 3.5) electrodes, including the influence of electrode size on the mass transport loss in the AMTEC cell. These electrodes possess excellent sodium transport properties making verification of device limitations on transport much more readily attained.

electrode kinetics alkali atom transport transport↗

NASA NTRS2008

Advanced Stirling Convertor Heater Head Durability and Reliability Quantification

The National Aeronautics and Space Administration (NASA) has identified the high efficiency Advanced Stirling Radioisotope Generator (ASRG) as a candidate power source for long duration Science missions, such as lunar applications, Mars rovers, and deep space missions, that require reliable design lifetimes of up to 17 years. Resistance to creep deformation of the MarM-247 heater head (HH), a structurally critical component of the ASRG Advanced Stirling Convertor (ASC), under high temperatures (up to 850 C) is a key design driver for durability. Inherent uncertainties in the creep behavior of the thin-walled HH and the variations in the wall thickness, control temperature, and working gas pressure need to be accounted for in the life and reliability prediction. Due to the availability of very limited test data, assuring life and reliability of the HH is a challenging task. The NASA Glenn Research Center (GRC) has adopted an integrated approach combining available uniaxial MarM-247 material behavior testing, HH benchmark testing and advanced analysis in order to demonstrate the integrity, life and reliability of the HH under expected mission conditions. The proposed paper describes analytical aspects of the deterministic and probabilistic approaches and results. The deterministic approach involves development of the creep constitutive model for the MarM-247 (akin to the Oak Ridge National Laboratory master curve model used previously for Inconel 718 (Special Metals Corporation)) and nonlinear finite element analysis to predict the mean life. The probabilistic approach includes evaluation of the effect of design variable uncertainties in material creep behavior, geometry and operating conditions on life and reliability for the expected life. The sensitivity of the uncertainties in the design variables on the HH reliability is also quantified, and guidelines to improve reliability are discussed.

Krause, David L.↗

NASA NTRS2000

The Dynamical Evolution of A Tubular Leonid Persistent Train

The dynamical evolution of the persistent train of a bright Leonid meteor was examined for evidence of the source of the luminosity and the physical conditions in the meteor path. The train consisted of two parallel somewhat diffuse luminous tracks, interpreted as the walls of a tube. A general lack of wind shear along the trail allowed these structures to remain intact for nearly 200 s, from which it was possible to determine that the tubular structure expanded at a near constant 10.5 m/s, independent of altitude between 86 and 97 km. An initial fast decrease of train intensity below 90 km was followed by an increase in intensity and then a gradual decrease at longer times, whereas at high attitudes the integrated intensity was nearly constant with time. These results are compared to a model that describes the dynamical evolution of the train by diffusion, following an initial rapid expansion of the hot gaseous trail behind the meteoroid. The train luminosity is produced by O ((sup 1)S) emission at 557 nm, driven by elevated atomic O levels produced by the meteor impact, as well as chemiluminescent reactions of the ablated metals Na and Fe with O3. Ozone is rapidly removed within the train, both by thermal decomposition and catalytic destruction by the metallic species. Hence, the brightest emission occurs at the edge of the train between outwardly diffusing metallic species and inwardly diffusing O3. Although the model is able to account plausibly for a number of characteristic features of the train evolution, significant discrepancies remain that cannot easily be resolved.

Jenniskens, Peter↗

NASA NTRS2013

Is There a Metallicity Ceiling to Form Carbon Stars? - A Novel Technique Reveals a Scarcity of C-Stars in the Inner M31 Disk

We use medium-band near-infrared (NIR) Hubble Space Telescope WFC3 photometry with model NIR spectra of Asymptotic Giant Branch (AGB) stars to develop a new tool for efficiently distinguish- ing carbon-rich (C-type) AGB stars from oxygen-rich (M-type) AGB stars in galaxies at the edge of and outside the Local Group. We present the results of a test of this method on a region of the inner disk of M31, where we nd a surprising lack of C stars, contrary to the ndings of previous C star searches in other regions of M31. We nd only 1 candidate C star (plus up to 6 additional, less certain C stars candidates), resulting in an extremely low ratio of C to M stars (C=M = (3.3(sup +20)(sub - 0.1) x 10(sup -4)) that is 1-2 orders of magnitude lower than other C/M estimates in M31. The low C/M ratio is likely due to the high metallicity in this region which impedes stars from achieving C/O > 1 in their atmospheres. These observations provide stringent constraints to evolutionary models of metal-rich AGB stars and suggest that there is a metallicity threshold above which M stars are unable to make the transition to C stars, dramatically affecting AGB mass loss and dust production and, consequently, the observed global properties of metal-rich galaxies.

Metallicity↗

NASA NTRS1995

A hybrid electronically scanned pressure module for cryogenic environments

Pressure is one of the most important parameters measured when testing models in wind tunnels. For models tested in the cryogenic environment of the National Transonic Facility at NASA Langley Research Center, the technique of utilizing commercially available multichannel pressure modules inside the models is difficult due to the small internal volume of the models and the requirement of keeping the pressure transducer modules within an acceptable temperature range well above the -173 degrees C tunnel temperature. A prototype multichannel pressure transducer module has been designed and fabricated with stable, repeatable sensors and materials optimized for reliable performance in the cryogenic environment. The module has 16 single crystal silicon piezoresistive pressure sensors electrostatically bonded to a metalized Pyrex substrate for sensing the wind tunnel model pressures. An integral temperature sensor mounted on each silicon micromachined pressure sensor senses real-time temperature fluctuations to within 0.1 degrees C to correct for thermally induced non-random sensor drift. The data presented here are from a prototype sensor module tested in the 0.3 M cryogenic tunnel and thermal equilibrium conditions in an environmental chamber which approximates the thermal environment (-173 degrees C to +60 degrees C) of the National Transonic Facility.

Chapman, J. J.↗

NASA NTRSDate not supplied

An Open-Source Numerical Model for Mitigating Refractory Alloy Hot Cracking Susceptibility

Refractory alloys are susceptible to solidification cracking during welding and 3D printing. Composition control is an effective method of controlling solidification cracking. This work evaluates the effect of compositional variation in refractory metal systems on a computed solidification cracking susceptibility. A numerical model has been developed using Python code and open-source CALPHAD software to calculate Kou’s crack susceptibility index. The model is validated against past weldability studies performed on several refractory alloy systems. The approach is extended towards the development of new alloys with improved 3D printability and weldability and is shown to have utility in defining compositional limits for existing alloys and feedstocks. Furthermore, the model will aid in determining process controls for powder reuse and recycling.

pycalphad↗

NASA NTRS1983

Statistical mechanics of light elements at high pressure. V Three-dimensional Thomas-Fermi-Dirac theory

A numerical technique for solving the Thomas-Fermi-Dirac (TED) equation in three dimensions, for an array of ions obeying periodic boundary conditions, is presented. The technique is then used to calculate deviations from ideal mixing for an alloy of hydrogen and helium at zero temperature and high presures. Results are compared with alternative models which apply perturbation theory to calculation of the electron distribution, based upon the assumption of weak response of the electron gas to the ions. The TFD theory, which permits strong electron response, always predicts smaller deviations from ideal mixing than would be predicted by perturbation theory. The results indicate that predicted phase separation curves for hydrogen-helium alloys under conditions prevailing in the metallic zones of Jupiter and Saturn are very model dependent.

Macfarlane, J. J.↗

NASA NTRS1990

Recent developments in the micromechanics of advanced composites

A summary of recent developments and results in the area of inelastic response of advanced composites obtained with the micromechanics model proposed by Aboudi is presented. The recent developments include investigation of linear viscoelastic response of polymer matrix composites and yielding and elastoplastic response of metal matrix composites. The predictive capability and accuracy of the model is demonstrated through comparison of the predicted results with experimental data and results of finite-element analyses.

Pindera, M.-J.↗

NASA NTRS1997

A Model of the THUNDER Actuator

A THUNDER actuator is a composite of three thin layers, a metal base, a piezoelectric wafer and a metal top cover, bonded together under pressure and at high temperature with the LaRC SI polyimid adhesive. When a voltage is applied between the metal layers across the PZT the actuator will bend and can generate a force. This document develops and describes an analytical model the transduction properties of THUNDER actuators. The model development is divided into three sections. First, a static model is described that relates internal stresses and strains and external displacements to the thermal pre-stress and applied voltage. Second, a dynamic energy based model is described that allows calculation of the resonance frequencies, developed force and electrical input impedance. Finally, a fully coupled electro-mechanical transducer model is described. The model development proceeds by assuming that both the thermal pre-stress and the piezoelectric actuation cause the actuator to deform in a pure bend in a single plane. It is useful to think of this as a two step process, the actuator is held flat, differential stresses induce a bending moment, the actuator is released and it bends. The thermal pre-stress is caused by the different amounts that the constituent layers shrink due to their different coefficients of thermal expansion. The adhesive between layers sets at a high temperature and as the actuator cools, the metal layers shrink more than the PZT. The PZT layer is put into compression while the metal layers are in tension. The piezoelectric actuation has a similar effect. An applied voltage causes the PZT layer to strain, which in turn strains the two metal layers. If the PZT layer expands it will put the metal layers into tension and PZT layer into compression. In both cases, if shear force effects are neglected, the actuator assembly will experience a uniform in-plane strain. As the materials each have a different elastic modulus, different stresses will develop in each layer and these stresses will induce a bending moment. When the actuator is released from its flat configuration, the differential stresses are relieved as the actuator bends.

Curtis, Alan R. D.↗

NASA NTRS2009

Dynamic Structural Fault Detection and Identification

Aircraft structures are designed to guarantee safety of flight in some required operational envelope. When the aircraft becomes structurally impaired, safety of flight may not be guaranteed within that previously safe operational envelope. In this case the safe operational envelope must be redefined in-flight and a means to prevent excursion from this new envelope must be implemented. A specific structural failure mode that may result in a reduced safe operating envelope, the exceedance of which could lead to catastrophic structural failure of the aircraft, will be addressed. The goal of the DFEAP program is the detection of this failure mode coupled with flight controls adaptation to limit critical loads in the damaged aircraft structure. The DFEAP program is working with an F/A-18 aircraft model. The composite wing skins are bonded to metallic spars in the wing substructure. Over time, it is possible that this bonding can deteriorate due to fatigue. In this case, the ability of the wing spar to transfer loading between the wing skins is reduced. This failure mode can translate to a reduced allowable compressive strain on the wing skin and could lead to catastrophic wing buckling if load limiting of the wing structure is not applied. The DFEAP program will make use of a simplified wing strain model for the healthy aircraft. The outputs of this model will be compared in real-time to onboard strain measurements at several locations on the aircraft wing. A damage condition is declared at a given location when the strain measurements differ sufficiently from the strain model. Parameter identification of the damaged structure wing strain parameters will be employed to provide load limiting control adaptation for the aircraft. This paper will discuss the simplified strain models used in the implementation and their interaction with the strain sensor measurements. Also discussed will be the damage detection and identification schemes employed and the means by which the damaged aircraft parameters will be used to provide load limiting that keeps the aircraft within the safe operational envelope.

Smith, Timothy↗

NASA NTRS1982

Petrography, mineral chemistry and origin of Type I enstatite chondrites

The petrography and mineralogy of four Type I enstatite chondrites were examined by optical and cathololuminescent and electron microprobe means to discern particular chemical and mechanical processes present during solar system condensation. The specimens examined included sections of the Indarch, Abee, Kota-Kota, and Adhi-Kot chondrites. Textural interpretations were performed, as well as chemical analyses of the degree of similarity of the clinoenstatite, olivine, accessory silicates, metal, schreibersite, troilite, oldhamite, and niningerite grains in each sample. Simple models of progressive condensation either at equilibrium or with mechanical removal of early condensates were ruled out due to the occurrence of both blue and red enstatite crystals in metal clasts. A need for sequential processes of mixing, melting, crystallization, condensation, fracturing, and mechanical aggregation are suggested as necessary to model the formation mechanisms of the mineral aggregates.

Leitch, C. A.↗

NASA NTRS1981

Interiors of the giant planets - Recent advances

It is shown that new experimental evidence that the molecular to metallic transition in hydrogen takes place near 2 Mb rather than 3 Mb affects only slightly the current models of Jupiter but a more radical change has to be noted for the model of Saturn. Magnetic field and luminosity data indicate that in this planet the metallic H-He layer is actually split into an inhomogeneous upper layer and an He-rich lower layer. The recent three-layer model of Uranus accounts better for various observational constraints than the previous models despite the uncertainty about the planet's rotation period. The models of the interior of Neptune are still rather uncertain.

Smoluchowski, R.↗

NASA NTRS1994

On the X-ray spectrum of Kepler's supernova remnant

We have devised a method to do nonequilibrium ionization calculations on the results of two-dimensional hydrodynamical simulations, based on the algorithm of Hughes & Helfand (1985). We have calculated the ionization structure and X-ray emission for a two-dimensional numerical hydrodynamical simulation for the remnant of Kepler's supernova (SN); the hydrodynamical model was presented in a previous paper. In this model, the progenitor of Kepler's SN is assumed to have been a massive runaway star ejected from the Galactic plane. In its red supergiant stage, its dense stellar wind was distorted and compressed into a bow shock by the ram pressure of the tenuous interstellar medium. The subsequent interaction of the supernova ejecta with this asymmetric circumstellar matter produced a strongly asymmetric supernova remnant (SNR). In this paper, we present calculated X-ray spectra for this hydrodynamical model. A comparison with observations implies a moderate overabundance of Fe in Kepler's SNR (only 50% larger than its cosmic value), in contrast to a large (6 to 15) Fe overabundance derived previously. However, we confirm earlier conclusions that Si and S abundances are 2 to 3 times solar. These modest enhancements of Si, S, and Fe may be attributed either to heavy-element enriched SN ejecta or to the initial chemical abundances of the SN progenitor, which originated in the metal-rich inner Galaxy. The comparison of our models with the observed spectra confirm theoretical predictions that moderate electron heating occurs at strong collisionless shock fronts, with the implied electron/mean temperature ratio of approximately 0.5.

Borkowski, Kazimierz J.↗

NASA NTRS1989

Grain mantles: The impact on grain evolution and selective extinction

Depletion studies are used to infer the presence of mantles and to constrain grain evolutionary models in the diffuse interstellar medium. The presence of these mantles appears to be important in the evolution of the grains inside diffuse as well as dense clouds. In dense clouds where the element-to-element abundances sometimes differ from those found in diffuse clouds, empirical relationships are starting to emerge between gas abundances and various types of peculiar selective extinction. These peculiar extinction curves may be the results of nonvolatile mantle formation on grain cores or may reflect chemical differences due to variations in the intrinsic metalicity from one cloud to another. A simple model of the time evolution of a parcel of gas and dust as observed by the depletion of two elements is presented. Different studies of grain evolution and selective extinction are discussed and compared.

Joseph, Charles L.↗