Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Slurry-Mixing Chamber

Paddles and water jets create uniform, continuous flow. Slurry-mixing chamber on hydrojet-jaw mining machine ensures uniform, continuously flowing slurry of coal particles in water. By mixing coal and water at high speed and keeping resulting slurry in constant motion, chamber prevents slurry from becoming dry semisolid that blocks flow. Also prevents coal particles from settling and caking in bends, corners, and other locations where flow changes in direction or speed.

Lewis, E. V.↗
NASA NTRS1982

Dilution zone mixing studies

The objectives and status of a project to investigate various aspects of the jet in a confined cross flow problem are outlined. The experiments performed thus far dealt primarily with a single row of jets mixing into an isothermal flow in a constant cross section duct. Variations in the mixing were observed as a function of jet to mainstream momentum ratio, orifice size, and spacing. The current experiments examine perturbations of this problem characteristic to gas turbine combustion chambers, namely: flow area convergence, nonisothermal mainstream flow, and opposed in line and staggered injection. An empirical model was developed to describe the observed temperature distributions. The current interactive code provides a 3-D pictorial representation of the temperature, as given by these correlations, for any user specified downstream location, flow, and orifice parameters.

Holdeman, J. D.↗
NASA NTRS1982

Dilution jet mixing

Schematics are given for test section configurations, orifice configurations, and the dilution jet mixing test rig used to collect a data base on mixing a single sided and a two sided row of jets with a confined cross flow. Parameters investigated include momentum ratio; nonuniform cross stream temperature and velocity profiles; cold/hot injection, and cross stream flow area convergence. Graphs show measured theta momentum distributions for: (1) in line and staggered orifice configurations; and (2) the profiled mainstream; and (3) flow area convergence.

Srinivasan, S.↗
NASA NTRS1984

Mixed Layers and Satellite Retrievals

As part of the process to determine whether it is possible to retrieve boundary layer structure with the current sounding techniques, temperature retievals were performed for radiosonde profiles that showed temperature inversions. It was found that when temperature inversions exceed 8 to 10 C a retrieval will indeed show a temperature increase with height over a limited vertical distance. For weaker inversions retrieved temperatures are generally smoothly decreasing with height. It is, however, impossible to determine the actual mixed layer height from the retrievals. Whether the water vapor channels could be used in observing mixed layer structure was investigated. Temperature inversions are accompanied by significant drops in relative humidity. While this effect is very pronounced in parts of the trade wind regimes with relative humidity drops of up to 60%, it is widespread in other areas of the ocean as well. A simulation experiment was performed in which brightness temperatures were computed for smooth temperature and humidity profiles and compared with those computed from inversion profiles.

Boers, R.↗
NASA NTRS1985

Cumulus cloud venting of mixed layer ozone

Observations are presented which substantiate the hypothesis that significant vertical exchange of ozone and aerosols occurs between the mixed layer and the free troposphere during cumulus cloud convective activity. The experiments utilized the airborne Ultra-Violet Differential Absorption Lidar (UV-DIAL) system. This system provides simultaneous range resolved ozone concentration and aerosol backscatter profiles with high spatial resolution. Evening transects were obtained in the downwind area where the air mass had been advected. Space-height analyses for the evening flight show the cloud debris as patterns of ozone typically in excess of the ambient free tropospheric background. This ozone excess was approximately the value of the concentration difference between the mixed layer and free troposphere determined from independent vertical soundings made by another aircraft in the afternoon.

Ching, J. K. S.↗
NASA NTRS1984

Detection of aspen/conifer forest mixes from multitemporal Landsat digital data

Aspen, conifer and mixed aspen/conifer forests were mapped for a 15-quadrangle study area in the Utah-Idaho Bear River Range using Landsat multispectral scanner data. Digital classification and statistical analysis of Landsat data allowed the identification of six groups of signatures which reflect different types of aspen/conifer forest mixing. Photo interpretations of the print symbols suggest that such classes are indicative of mid to late seral aspen forests. Digital print map overlayes and acreage calculations were prepared for the study area quadrangles. Further field verification is needed to acquire additional information about the nature of the forests. Single data Landsat analysis should be a cost effective means to index aspen forests which are at least in the mid seral phase of conifer invasion. Since aspen canopies tend to obscure understory conifers for early seral forests, a second data analysis, using data taken when aspens are leafless, could provide information about early seral aspen forests.

Merola, J. A.↗
NASA NTRS1984

A perspective view of the plane mixing layer

A three-dimensional model of the plane mixing layer is constructed by applying digital image processing and computer graphic techniques to laser fluorescent motion pictures of its transversal sections. A system of streamwise vortex pairs is shown to exist on top of the classical spanwise eddies. Its influence on mixing is examined.

Jimenez, J.↗
NASA NTRS1985

Direct numerical simulations of a reacting mixing layer with chemical heat release

In order to study the coupling between chemical heat release and fluid dynamics, direct numerical simulations of a chemically reacting mixing layer with heat release are performed. The fully compressible equations as well as an approximate set of equations that is asymptotically valid for low-Mach-number flows are treated. These latter equations have the computational advantage that high-frequency acoustic waves have been filtered out, allowing much larger time steps to be taken in the numerical solution procedure. A detailed derivation of these equations along with an outline of the numerical solution technique is given. Simulation results indicate that the rate of chemical product formed, the thickness of the mixing layer, and the amount of mass entrained into the layer all decrease with increasing rates of heat release.

Mcmurtry, P. A.↗
NASA NTRS1985

Acoustic control of free jet mixing

The paper reports a detailed study on the acoustic control of free jet mixing at realistic Reynolds numbers. The experimental results were obtained at Mach numbers of 0.3 and 0.8 and flow total temperatures up to 800 K. The Reynolds numbers ranged from 350,000 to 1,300,000. Excitation Strouhal numbers were in the range of 0.2 to 0.6. The experimental results are compared with predictions, based on an extension of the analysis by Tam and Morris. The results showed that proper upstream tone excitation enhances mixing of unheated jets for both high-speed, high Reynolds number conditions and for low-speed conditions. The heated jet, however, shows a response to upstream excitation that depends on jet Mach number. The agreement between the predictions and the experiments is very good for unheated jet conditions. However, for jets heated to temperatures above 600 K, the theoretical predictions differ from the experimental results.

Lepicovsky, J.↗
NASA NTRS1985

Theoretical study relating the two-photon absorption cross section to the susceptibility controlling four-wave mixing

A theory that it is necessary to extract a two-photon absorption cross section from a mixing signal is developed. The dependence of the cross section on the third-order susceptibility is shown and both the mixing signal and reference signal dependences on the susceptibility are given. Techniques to process the measured value of the susceptibility and relate it to the cross section are developed and limits of validity are established. Finally, a comparison is made between the expression for the cross section presently reported and values given elsewhere.

Burris, J.↗
NASA NTRS1985

Airborne Lidar measurements of aerosols, mixed layer heights, and ozone during the 1980 PEPE/NEROS summer field experiment

A detailed summary of the NASA Ultraviolet Differential Absorption Lidar (UV DIAL) data archive obtained during the EPA Persistent Elevated Pollution Episode/Northeast Regional Oxidant Study (PEPE/NEROS) Summer Field Experiment Program (July through August 1980) is presented. The UV dial data set consists of remote measurements of mixed layer heights, aerosol backscatter cross sections, and sequential ozone profiles taken during 14 long-range flights onboard the NASA Wallops Flight Center Electra aircraft. These data are presented in graphic and tabular form, and they have been submitted to the PEPE/NEROS data archive on digital magnetic tape. The derivation of mixing heights and ozone profiles from UV Dial signals is discussed, and detailed intercomparisons with measurements obtained by in situ sensors are presented.

Browell, E. V.↗
NASA NTRS1985

Regolith erosion and regolith mixing at the Apollo 15 site on the moon

Regolith samples from the Apollo 15 landing site were used to trace soil mixing. Mixing model calculations were performed on the chemical compositions of soils from different stations. The model was constructed using modal abundance data on crystalline fragments and green glass spherules.

Basu, A.↗
NASA NTRS1985

Atomization and Mixing Study

The primary objective was the obtainment of atomization and mixing performance data for a variety of typical liquid oxygen/hydrocarbon injector element designs. Such data are required to establish injector design criteria and to provide critical inputs to liquid rocket engine combustor performance and stability analysis, and computational codes and methods. Deficiencies and problems with the atomization test equipment were identified, and action initiated to resolve them. Test results of the gas/liquid mixing tests indicated that an assessment of test methods was required. A series of 71 liquid/liquid tests were performed.

Ferrenberg, A.↗
NASA NTRS1986

Lunar nitrogen: Secular variation or mixing?

The two current models to explain the nearly 40% variation of the lunar nitrogen isotopic composition are: (1) secular variation of solar wind nitrogen; and (2) a two component mixing model having a constant, heavy solar wind admixed with varying amounts of indigenous light lunar N (LLN). Both models are needed to explain the step pyrolysis extraction profile. The secular variation model proposes that the low temperature release is modern day solar wind implanted into grain surfaces, the 900 C to 1100 C release is from grain surfaces which were once exposed to the ancient solar wind but which are now trapped inside agglutinates, and the >1100 C release as spallogenic N produced by cosmic rays. The mixing model ascribes the components to solar wind, indigenous lunar N and spallogenic N respectively. An extension of either interpretation is that the light N seen in lunar breccias or deep drill cores represent conditions when more N-14 was available to the lunar surface.

Norris, S. J.↗
NASA NTRS1986

Perspectives on dilution jet mixing

A microcomputer code which displays 3-D oblique and 2-D plots of the temperature distribution downstream of jets mixing with a confined crossflow has been used to investigate the effects of varying the several independent flow and geometric parameters on the mixing. Temperature profiles calculated with this empirical model are presented to show the effects of orifice size and spacing, momentum flux ratio, density ratio, variable temperature mainstream, flow area convergence, orifice aspect ratio, and opposed and axially staged rows of jets.

Holdeman, J. D.↗
NASA NTRS1984

On dynamics of laminated anisotropic plates using a refined mixed plate element

An analysis of the free vibration and transient response of laminates using a mixed shear flexible element is presented. The element is based on a refined theory that accounts for a parabolic distribution of the transverse shear stresses through each lamina and requires no shear correction coefficients. The mixed formulation of the theory treats the five displacement functions and six stress resultants independently so that they are nodal degrees of freedom in the finite element model. Sample problems using the element are analyzed and the results of free vibration and transient response are presented. Compared to the existing shear deformation plate theory the present refined theory gives more accurate results for frequencies, displacements and stresses.

Putcha, N. S.↗
NASA NTRS1986

Parabolized Navier-Stokes analysis of ducted turbulent mixing problems with finite-rate chemistry

A hybrid implicit/explicit approach for analyzing 2D ducted turbulent mixing problems with finite-rate chemistry is presented. The approach combines a fully-implicit parabolic mixing algorithm, an explicit viscous-characteristic based shock-capturing algorithm, and linearized implicit chemical kinetic algorithm. The resultant model provides spatial marching solutions of the parabolized Navier-Stokes (PNS) equations for supersonic combustion and viscous nozzle flowfields. Specialized procedures are incorporated to deal with the near wall sublayer and with small central pockets of subsonic flow. A parabolic option is available which can be utilized in the direct or inverse mode for design applications. The ability of the model to treat shock waves and wave/mixing layer interactions is assessed via comparisons of predictions with those of well established explicit shock-capturing Euler (SCIPPY) and PNS (SCIPVIS) models. Applications to a variety of supersonic combustion flowfield problems involving tangential or moderately inclined fuel injection, and, to a viscous nozzle flow problem, are presented. This paper serves to exhibit overall capabilities of the model developed and no comparisons with supersonic combustion data are presented. Such comparisons serve mainly to validate the modeling of the turbulence and turbulence/chemical interactions and will be the subject of a future paper.

Sinha, N.↗
NASA NTRS1985

Characterization of Mode I and mixed-mode delamination growth in T300/5208 graphite/epoxy

The roles played by Mode I and Mode II strain-energy release rates (G-I and G-II, respectively) in inducing delamination growth under static and fatigue loading were investigated, using T300/5208 graphite/epoxy specimens. Double cantilever beam (DCB) specimens and cracked lap shear (CLS) specimens were used for pure Mode I and mixed-mode tests, respectively. Fatigue-induced delamination growth was characterized by constant-amplitude fatigue tests at a minimum to maximum cyclic load ratio of 0.05 and a frequency of 10 Hz. During the tests, the maximum and minimum strain-energy release rates (Gmax, Gmin) and the delamination growth rate (da/dN) were monitored. Static tests on mixed-mode CLS specimens measured the total strain-energy release rate, which was broken into G-I and G-II components using finite-element analysis. A power-law relationship between da/dN and G-Imax, and da/dN and Gmax were obtained from fatigue test results on DCB and CLS specimens, respectively. The power law for a pure Mode II delamination was derived from CLS results by subtracting the contribution due to G-I.

Ramkumar, R. L.↗