Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mix Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Post-irradiation examinations of annular mixed oxide fuels with average burnup 4 and 5% FIMA

In this paper, we present post-irradiation examination results on two type of annular mixed oxide fuel pins irradiated in the Fast Flux Test Facility (FFTF) sodium cooled reactor to an average burnup between 4% and 5% fission of initial heavy atom (FIMA). The pins differed only from the initial Pu content, which was 22 wt% and 26 wt%, respectively. The overall performance of the pins was excellent, in line with previous historical results. The pins with higher Pu content experienced higher irradiation temperatures which influenced the fission gas release, fuel swelling, and Cs distribution compared to the other pins. All the post-irradiation examinations results are discussed against the irradiation parameters. In particular, the pins with higher initial Pu content, i.e., 26 wt%, experienced higher power that resulted in enhanced fission gas release compared to the other two pins with 22 wt% initial Pu content. For the pins with higher fission gas release, onset of Cs redistribution was observed. The two pins that had lower initial Pu content and burnup showed a Cs axial distribution similar to the as-produced one.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Supported ionic liquid membranes (SILMs) with exceptional selectivity and permeability for dilute CO 2 separations

Supported ionic liquid membranes (SILMs), containing phosphonium ionic liquids with aprotic N-heterocyclic anions (AHA ILs) in an inert inorganic support, were tested under both dry and humidified (40 % RH) mixed-gas conditions down to 420 ppm CO 2 in N 2 at 35 °C. In the dry case, the best performing IL, triethyl(octyl)phosphonium 4-bromopyrazolide ([P 2228 ][4-BrPyra]) exhibited mixed-gas CO 2 permeabilities and CO 2 /N 2 permeability selectivities as high as 26,800 barrer and 7,000, respectively. In the presence of humidity, the CO 2 permeability and CO 2 /N 2 selectivity increased to 49,100 barrer and 13,200, respectively, and these are the highest reported combination in the literature. Humidity amplifies CO 2 permeabilities and CO 2 /N 2 permeability selectivities through increases in CO 2 capacity due to bicarbonate formation and through faster mobility of the mobile carrier from decreased viscosity. Furthermore, N 2 permeability stayed roughly invariant in the presence of humidity, likely from competing effects of viscosity reduction and lower N 2 solubility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Validation and Sensitivity Analysis of a 1-D Lake Model Across Global Lakes

Lakes have important influence on weather and climate from local to global scales. However, their prediction using numerical models is notoriously difficult because lakes are highly heterogeneous across the globe, but observations are sparse. In this study, we assessed the performance of a 1-D lake model in simulating the thermal structures of 58 lakes with diverse morphometric and geographic characteristics by following the phase 2a local lake protocol of the Inter-sectoral Impact Model Intercomparison Project (ISIMIP2a). After calibration, the root-mean-square errors (RMSE) were below 2 °C for 70% and 75% of the lakes for epilimnion and full-profile temperature simulations, with an average of 1.71 °C and 1.43 °C, respectively. The model performance mainly depended on lake shape rather than location, supporting the possibility of grouping model parameters by lake shape for global applications. Furthermore, through machine-learning based parameter sensitivity tests, we identified turbulent heat fluxes, wind-driven mixing and water transparency as the major processes controlling lake thermal and mixing regimes. Snow density was also important for modeling the ice phenology of high-latitude lakes. The relative influence of the key processes and the corresponding parameters mainly depended on lake latitude and depth. Turbulent heat fluxes showed a decreasing importance in affecting epilimnion temperature with increasing latitude. Wind-driven mixing was less influential to lake stratification for deeper lakes while the impact of light extinction, on the contrary, showed a positive correlation with depth. Our findings may guide improvements in 1-D lake model parameterizations to achieve higher fidelity in simulating global lake thermal dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Impacts of Distinct Flexibility Enhancements on the Value and Dynamics of Natural Gas Power Plant Operations

The rapid increase of renewable generation and its anticipated continued growth requires greater operational flexibility in modern power systems. Previous studies explored the addition of more flexible resources to improve system flexibility, but this may also be achieved at lower cost by enhancing existing power plants via flexibility retrofits. Potential flexibility upgrades to existing thermal plants include modifications that enable faster ramp rates, increase maximum load levels, decrease minimum load levels, and provide faster and lower cost startup operations. In this paper, we focus on improvements to existing natural gas combined cycle generators, and apply a unit commitment model to analyze the impact that each specific upgrade has on their operational dynamics and profitability from both the system perspective and from the asset owner perspective. We show that the value of each type of flexibility improvement varies depending on the capacity factor and usage pattern of the generator before the upgrade, and that the relative benefit of each type of flexibility varies. We demonstrate diminishing returns to increased flexibility when upgrading multiple generators simultaneously. Sensitivity tests for several shares of renewable generation, different generation mixes and different net load realizations confirm the generality of the results shown.

03 NATURAL GAS↗
DOE OSTI2023

The Effects of Lithium Ions and pH on the Function of Polyacrylic Acid Binder for Silicon Anodes

Binder plays a critical role in the performance of silicon anodes for lithium-ion batteries, specifically by connecting particles of active material and promoting adhesion to the current collector. Recent studies have differed on the relative cycle life of silicon anodes made from water-based polyacrylic acid (PAA) vs LiOH-PAA binders. Differences between the two may be due to the pH value or the extra Li + in the binder, both of which change when LiOH is added to PAA. Here we investigate the impact of these two variables on the performance of silicon anodes. Regarding the effect of Li + , cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results confirm our hypothesis that the extra Li + facilitates ion transport. Regarding pH, we find that high pH in binders is detrimental to the electrode mechanical integrity, as observed in peeling tests and cross-sectional imaging. However, viscosity tests reveal that increased pH benefits the coating and mixing process. Further, our cycling results show that LiOH-PAA binder maintains greater cell capacity than does PAA, and further that LiOH-PAA at pH 4.5 leads to a cell with the highest capacity. Therefore, an intermediate pH is an optimal compromise between benefits observed for the low and high pH experiments.

25 ENERGY STORAGE↗
DOE OSTI2025

Knowledge Oriented Graph Unified Transformer (KOGUT) v0.1

KOGUT — Knowledge Oriented Graph Unified Transformer KOGUT implements the Relational Graph Transformer (RelGT) architecture for knowledge graph link prediction in biological domains, with a primary focus on microbial growth media prediction. While the original RelGT (arXiv:2505.10960) targets relational tables, time series, and multi-table databases, KOGUT adapts this architecture for heterogeneous biological knowledge graphs, providing first-in-class AI predictive models for microbial cultivation. Key Adaptations Beyond Original RelGT: - Knowledge Graph Focus: Applied to biological KGs with semantic node types (taxa, chemicals, media, phenotypes, environments) versus generic relational database tables, trained on the KG-Microbe knowledge graph (1.3M entities, 2.9M edges, 24 relation types). - Multimodal Node Encoding: Integrates node labels, categories, descriptions, and synonyms from KG metadata through learned embedding layers—adapting relational column features to graph node attributes with textual semantics. - Extended K-Hop Subgraph Strategy: Optimized neighborhood sampling (3-hop default, configurable up to 200 nodes) tuned for sparse biological networks, building on the original local-global attention framework with biological relation preservation. - Biolink Predicate Preservation: Type-specific transformations for 24 biological edge semantics (occurs_in, consumes, produces, has_phenotype, subclass_of) beyond standard relational foreign keys, enabling multi-relation link prediction. - Inductive Learning Support: Enables zero-shot predictions for novel taxa through feature-based embeddings (temperature, oxygen requirements, gram stain, cell shape), extending the original transductive relational benchmark scope to uncultured microorganisms. CheapSOTA Performance Optimizations (This Distribution): - VQ-EMA Centroid Attention: Vector quantization with exponential moving average for improved global context modeling (+5-10% MRR improvement). - HDF5 Precomputed Data Loading: One-time preprocessing of k-hop subgraphs to eliminate redundant graph traversals (2-5× training speedup). - Distributed Data Parallel Training: Multi-GPU support for scaling to larger knowledge graphs (tested on 4× NVIDIA A100 GPUs at NERSC Perlmutter). - Mixed Precision Training: Automatic mixed precision (AMP) for memory efficiency and faster training. Advantages Over Standard Knowledge Graph Embedding Models: Combines RelGT's proven multi-element tokenization (features, type, hop, structure) with graph-native biological representations, enabling interpretable link prediction across heterogeneous entities that standard embedding models (TransE, RotatE, ComplEx) and table-based transformers cannot directly model. Achieves near-perfect performance on microbial growth media prediction (MRR: 0.9966, Precision@1: 0.9932, Hit@10: 1.0000) while maintaining explainability through attention-based reasoning over biological pathways. Training Data: - KG-Microbe merged knowledge graph: 1,379,337 nodes, 2,960,472 edges - 24 biological relation types including taxonomic hierarchies, metabolic interactions, phenotype associations, and environmental relationships - Primary prediction task: Growth media suitability for microbial taxa (biolink:occurs_in, 50K edges) - Multi-relation capability: Predicts links for any of the 24 relation types, including chemical consumption/production, phenotype associations, and taxonomic classification Citation: Original RelGT Architecture: Dwivedi et al., "Relational Graph Transformer", arXiv:2505.10960, 2025 KOGUT Implementation: Knowledge Oriented Graph Unified Transformer for Microbial Growth Media Prediction Developed at Lawrence Berkeley National Laboratory (LBNL) Trained on NERSC Perlmutter supercomputer

Joachimiak, Marcin [Lawrence Berkeley National Lab↗
DOE OSTI2021

Environmental predictors of pulmonary nontuberculous mycobacteria (NTM) sputum positivity among persons with cystic fibrosis in the state of Florida

Nontuberculous mycobacteria (NTM) are opportunistic human pathogens that are commonly found in soil and water, and exposure to these organisms may cause pulmonary nontuberculous mycobacterial disease. Persons with cystic fibrosis (CF) are at high risk for developing pulmonary NTM infections, and studies have shown that prolonged exposure to certain environments can increase the risk of pulmonary NTM. It is therefore important to determine the risk associated with different geographic areas. Using annualized registry data obtained from the Cystic Fibrosis Foundation Patient Registry for 2010 through 2017, we conducted a geospatial analysis of NTM infections among persons with CF in Florida. A Bernoulli model in SaTScan was used to identify clustering of ZIP codes with higher than expected numbers of NTM culture positive individuals. Generalized linear mixed models with a binomial distribution were used to test the association of environmental variables and NTM culture positivity. We identified a significant cluster of M . abscessus and predictors of NTM sputum positivity, including annual precipitation and soil mineral levels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Design Optimization of A generic Fissile Solution for Mo99 production using Electron Beam-based Neutron Generator using MCNP+CFD

Molybdenum-99 ( 99 Mo) is a medical isotope used in 80% of all medical imaging procedures today. However, 99 Mo is not directly administered to patients for imaging; its decay product, technetium-99m ( 99 mTc), is a metastable isotope with a half-life of ~6 hours. Such a short half-life does not allow for production, separation, and application to a patient before decaying further. Therefore, the solution is to produce the precursor to 99 mTc, 99 Mo. 99 Mo has a half-life of 66 hours, long enough to produce the material and send it to the desired location before it fully decays. Under National Nuclear Security Administration’s (NNSA) highly enriched uranium (HEU) minimization mission, the Material Management and Minimization (M3) office leads the Molybdenum-99 (Mo-99) program. A major goal of the Mo-99 program is to develop methods of producing 99 Mo using low enriched uranium (LEU) opposed to the traditionally used HEU domestically in the U.S. Internationally, LEU is the new standard for use in research reactors and isotope production facility. In this study, we introduce a generic fissile solution system for 99 Mo production facility meeting the design requirement of 1) LEU usage as fissile material and 2) subcritical fissile system coupled with a horizontal electron beam (E-beam) accelerator. The focus of this research is to optimize a fissile solution configuration for maximum 99 Mo production yield using MCNP model, and ultimately implement the optimized design with computational fluid dynamics (CFD) model to understand thermal hydraulic behavior and solution convection characteristic. The report consists of two parts: 1) isotope yield calculation and criticality analysis with a wide range of parametric test matrix, and 2) thermal hydraulic analysis for solution mixing and cooling assessment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Results of the Analyses of SMECT Mercury Sample Collected During Mercury Pump (MB1) Functional Check

A pump added to remove mercury from the sump of the Slurry Mix Evaporator Condensate Tank (SMECT) in DWPF was successfully tested in 2020, resulting in a sample of contaminated mercury obtained from the Mercury Purification Process (MPP) cell. The mercury in the sump of the SMECT was present as a result of steam stripping of sludge slurry in the Sludge Receipt and Adjustment Tank (SRAT) at DWPF. A schematic of the MPP system provided by DWPF personnel is shown in Appendix A. DWPF personnel supplied the following detailed description of the Hg sampling: “The sample provided is the result of DWPF extraction of mercury by means of the Mercury Pump-Water Cart. The Mercury Pump extracted the sample from the SMECT mercury sump. The pump uses pressurized water to transfer a small amount of mercury to a leachate bucket located at the Lab Mercury cell. The mercury and water were allowed to be self separated, and mercury was gravity decanted from the leachate bucket.” DWPF personnel indicate that the leachate bucket is equipped with both a top stopcock/drain and a lower/bottom stopcock/drain from which the mercury was decanted or drained out, while the separated water layer remained above the mercury during draining. The DWPF customer requested SRNL to analyze the sample for the following: gross alpha/nonvolatile beta analysis and perform a Toxicity Characteristic Leaching Procedure (TCLP) per the Environmental Protection Agency's Test Methods for Evaluating Solid Waste: Physical/Chemical Methods, SW-846. While the TCLP was preferred, a Total Metals analysis of the eight Resource Conservation and Recovery Act (RCRA) metals was deemed acceptable.2 The analytical data collected on this mercury sample will be used in planning for sample disposition as well to start a profile for future Hg disposition of Hg collected from steam stripping.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Root Pulling Force Across Drought in Maize Reveals Genotype by Environment Interactions and Candidate Genes

High-throughput, field-based characterization of root systems for hundreds of genotypes in thousands of plots is necessary for breeding and identifying loci underlying variation in root traits and their plasticity. We designed a large-scale sampling of root pulling force, the vertical force required to extract the root system from the soil, in a maize diversity panel under differing irrigation levels for two growing seasons. We then characterized the root system architecture of the extracted root crowns. We found consistent patterns of phenotypic plasticity for root pulling force for a subset of genotypes under differential irrigation, suggesting that root plasticity is predictable. Using genome-wide association analysis, we identified 54 SNPs as statistically significant for six independent root pulling force measurements across two irrigation levels and four developmental timepoints. For every significant GWAS SNP for any trait in any treatment and timepoint we conducted post hoc tests for genotype-by-environment interaction, using a mixed model ANOVA. We found that 8 of the 54 SNPs showed significant GxE. Candidate genes underlying variation in root pulling force included those involved in nutrient transport. Although they are often treated separately, variation in the ability of plant roots to sense and respond to variation in environmental resources including water and nutrients may be linked by the genes and pathways underlying this variation. While functional validation of the identified genes is needed, our results expand the current knowledge of root phenotypic plasticity at the whole plant and gene levels, and further elucidate the complex genetic architecture of maize root systems.

Woods, Patrick↗
NASA NTRS1972

Infrared laboratory studies of synthetic planetary atmospheres

The initial stages of the research were involved with a test of Burch's law of multiplicative transmittance for mixed absorbing gases when their lines are broadened by H2 and He, which are constituents of the atmospheres of the major planets. The broadening of individual lines in the CO fundamental by various gases was investigated. Line strength and half-width for individual CO lines were studied as a function of temperature. Measurements of total band absorptance as a function of absorber thickness and total effective pressure were made at various temperatures for bands of CO and N2O. Attempts were made to develop a phenomenological theory of line broadening that would account for the phenomena observed for the CO fundamental and those reported for more highly polar gases. Laboratory measurements of nitric acid vapor absorptance were compared with balloon measurements in arriving at an estimate of the quantity of nitric acid vapor present in the earth's atmosphere in the region of the ozone layer.

Williams, D.↗
NASA NTRS1974

Developing a gas rocket performance prediction technique

A simple, semi-empirical performance correlation/prediction technique applicable to gaseous and liquid propellant rocket engines is presented. Excellent correlations were attained for over 100 test firings by adjusting the computation of the gaseous mixing of an unreactive, coaxial jet using a correlation factor, F, which resulted in prediction of the experimental combustion efficiency for each firing. Static pressure, mean velocity and turbulence intensity in the developing region of non-reactive coaxial jets, typical of those of coaxial injector elements were determined. Detailed profiles were obtained at twelve axial locations (extending from the nozzle exit for a distance of five diameters) downstream from a single element of the Bell Aerospace H2/O2 19-element coaxial injector. These data are compared with analytical predictions made using both eddy viscosity and turbulence kinetic energy mixing models and available computer codes. Comparisons were disappointing, demonstrating the necessity of developing improved turbulence models and computational techniques before detailed predictions of practical coaxial free jet flows are attempted.

Morgenthaler, J. H.↗
NASA NTRS1975

Theoretical and experimental study of flow through turbine cascades with coolant flow injection

An analytical study is presented which deals with the change in the outlet flow conditions from a turbine blade row due to coolant air injection through slots. The analysis applies to small secondary to primary mass flow ratios, taking into consideration the change in boundary layer development resulting from injection. The effects of injection location, injection flow angle and injected air momentum flux are investigated. The results of the present analysis are compared with the values obtained using the mixing theory method and experimental data from cold flow tests in a turbine cascade tunnel.

Tabakoff, W.↗
NASA NTRS1977

Experimental clean combustor program, phase 3

A two-stage vortex burning and mixing combustor and associated fuel system components were successfully tested at steady state and transient operating conditions. The combustor exceeded the program goals for all three emissions species, with oxides of nitrogen 10 percent below the goal, carbon monoxide 26 percent below the goal, and total unburned hydrocarbons 75 percent below the goal. Relative to the JT9D-7 combustor, the oxides of nitrogen were reduced by 58 percent, carbon monoxide emissions were reduced by 69 percent, and total unburned hydrocarbons were reduced by 9 percent. The combustor efficiency and exit temperature profiles were comparable to those of production combustor. Acceleration and starting characteristics were deficient relative to the production engine.

Roberts, R.↗
NASA NTRS1976

Similarity theory of the buoyantly interactive planetary boundary layer with entrainment

A similarity model is developed for the vertical profiles of turbulent flow variables in an entraining turbulent boundary layer of arbitrary buoyant stability. In the general formulation the vertical profiles, internal rotation of the velocity vector, discontinuities or jumps at a capping inversion and bulk aerodynamic coefficients of the boundary layer are given by solutions to a system of ordinary differential equations in the similarity variable. To close the system, a formulation for buoyantly interactive eddy diffusivity in the boundary layer is introduced which recovers Monin-Obukhov similarity near the surface and incorporates a hypothesis accounting for the observed variation of mixing length throughout the boundary layer. The model is tested in simplified versions which depend only on roughness, surface buoyancy, and Coriolis effects by comparison with planetary-boundary-layer wind- and temperature-profile observations, measurements of flat-plate boundary layers in a thermally stratified wind tunnel and observations of profiles of terms in the turbulent kinetic-energy budget of convective planetary boundary layers. On balance, the simplified model reproduced the trend of these various observations and experiments reasonably well, suggesting that the full similarity formulation be pursued further.

Hoffert, M. I.↗
NASA NTRS1983

Fuel Vaporization Effects

A study of the effects of fuel-air preparation characteristics on combustor performance and emissions at temperature and pressure ranges representative of actual gas turbine combustors is discussed. The effect of flameholding devices on the vaporization process and NOx formation is discussed. Flameholder blockage and geometry are some of the elements that affect the recirculation zone characteristics and subsequently alter combustion stability, emissions and performance. A water cooled combustor is used as the test rig. Preheated air and Jet A fuel are mixed at the entrance of the apparatus. A vaporization probe is used to determine percentage of vaporization and a gas sample probe to determine concentration of emissions in the exhaust gases. The experimental design is presented and experimental expected results are discussed.

Bosque, M. A.↗
NASA NTRS1985

Target Simulator for Synthetic-Aperture Radars

In proposed Target Simulator for Testing Synthetic-Aperture Radars, radar transmitter output received, mixed down to video frequencies, and passed through variable digital delay. Delayed signal mixed up to original carrier frequency and transmitted back to radar. Synthetic-aperture radar (SAR) generates return signal that contains range-curvature information in addition to Doppler-frequency information.

Zebker, H. A.↗