Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Galileo dual-spin attitude and articulation control system

Galileo, the first outer planet explorer to be configured as a dual spinner, will conduct intensive investigation of Jupiter's atmosphere, satellites, and magnetosphere. The exacting mission, coupled with the inherently complex spin and flexible body dynamics of the vehicle, demands careful design of the Galileo Attitude and Articulation Control System (AACS). A brief overview of the Galileo mission and spacecraft is presented, followed by a detailed discussion on the mechanization of the AACS and the many factors that influence its design. Included are discussions on attitude determination and control, high-gain antenna pointing, science scan platform pointing, nutation damping, wobble compensation, spin and despin control, and propellant migration and boom flexibility effects.

Ward, R. S.↗
NASA NTRS1978

Albedo climatology analysis and the determination of fractional cloud cover

Monthly and zonally averaged surface cover climatology data are presented which are used to construct monthly and zonally averaged surface albedos. The albedo transformations are then applied to the surface albedos, using solar zenith angles characteristic of the Nimbus 6 satellite local sampling times, to obtain albedos at the top of clear and totally cloud covered atmospheres. These albedos are then combined with measured albedo data to solve for the monthly and zonally averaged fractional cloud cover. The measured albedo data were obtained from the wide field of view channels of the Nimbus 6 Earth Radiation Budget experiment, and consequently the fractional cloud cover results are representative of the local sampling times. These fractional cloud cover results are compared with recent studies. The cloud cover results not only show peaks near the intertropical convergence zone, but the monthly migration of the position of these peaks follows general predictions of atmospheric circulation studies.

Curran, R. J.↗
NASA NTRS1979

Bubble behavior during solidification in low-gravity

The trapping and behavior of gas bubbles were studied during low gravity solidification of carbon tetrabromide. The flight experiments were performed during two sounding rocket flights (SPAR 1 and SPAR 3) and involved gradient freeze solidification of gas saturated melts. Gas bubbles were evolved at the solid-liquid interfaces during the low gravity intervals. No large-scale thermal migration of bubbles, bubble pushing by the solid-liquid interface, or bubble detachment from the interface were observed during the low gravity experiments. During the SPAR 3 experiment, a unique bubble motion-fluid flow event occurred in one specimen: a large bubble moved downward and caused some circulation of the melt. The gas bubbles that were trapped by the solid in commercial purity material formed voids that had a cyclindrical shape in SPAR 3, in contrast to the spherical shape that had been observed in SPAR 1. These shapes were not influenced by the gravity level, but were dependent upon the initial temperature gradient. In higher purity material the shape of the voids changed from cylindrical in one-g to spherical in low-g.

Papazian, J. M.↗
NASA NTRS1979

Dispersal of forest insects

Dispersal flights of selected species of forest insects which are associated with periodic outbreaks of pests that occur over large contiguous forested areas are discussed. Gypsy moths, spruce budworms, and forest tent caterpillars were studied for their massive migrations in forested areas. Results indicate that large dispersals into forested areas are due to the females, except in the case of the gypsy moth.

Mcmanus, M. L.↗
NASA NTRS1977

Analysis of aerospace nickel-cadmium battery cells

Various steps followed in analyzing the electrolyte, separator, and electrodes are reviewed. Specific emphasis is given to scanning electron microscopic and metallographic analysis of the plates. Cadmium migration is defined, its effects and causes are examined, and methods for its reduction in cells are suggested.

Eliason, R. R.↗
NASA NTRS1979

Development of a Model and Computer Code to Describe Solar Grade Silicon Production Processes

Mathematical models and computer codes based on these models, which allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon were developed. The following tasks were accomplished: (1) formulation of a model for silicon vapor separation/collection from the developing turbulent flow stream within reactors of the Westinghouse (2) modification of an available general parabolic code to achieve solutions to the governing partial differential equations (boundary layer type) which describe migration of the vapor to the reactor walls, (3) a parametric study using the boundary layer code to optimize the performance characteristics of the Westinghouse reactor, (4) calculations relating to the collection efficiency of the new AeroChem reactor, and (5) final testing of the modified LAPP code for use as a method of predicting Si(1) droplet sizes in these reactors.

Srivastava, R.↗
NASA NTRS1979

Effect of dopants on annealing performance of silicon solar cells

The optimum annealing parameters of time and temperature for producing cell output recovery were established. Devices made from gallium doped and boron doped silicon were investigated. The cells ranged in resistivity from 0.1 to 20 ohm-cm and in thickness from 50 to 250 micrometers. The observations can be explained in a qualitative manner by postulating a pair of competing mechanisms to account for the low temperature reverse annealing seen in most boron and gallium doped silicon solar cells. Still another mechanism dominates at higher temperatures (350 C and greater) to complete this model. One of the mechanisms, defined as B, allows migrators to couple with radiation induced recombination sites thus increasing or enhancing their capture cross sections. This would tend to reduce minority carrier diffusion length. The new recombination complex is postulated to be thermally stable up to temperatures of approximately 350 C.

Scott-Monck, J. A.↗
NASA NTRS1978

Application of microprocessors to spacecraft synthetic aperture radar processing

A ground-based digital synthetic aperture radar (SAR) processor capable of correlating images from raw spacecraft data at real-time rates is currently under development. The processor design requirements are particularly formidable due to (1) range migration effects resulting from planetary curvature and rotation, (2) antenna beam pointing errors, and (3) variation of the Doppler reference function with changing orbital parameters. Based upon the current effort, this paper describes a candidate real-time on-board SAR processing implementation approach that might evolve for future spacecraft applications. Key features include the use of custom large scale integration (LSI) charge-coupled device (CCD) technology to accomplish the correlation functions and microprocessor technology to effect control.

Arens, W. E.↗
NASA NTRS1979

Evolution of Martian polar landscapes - Interplay of long-term variations in perennial ice cover and dust storm intensity

The discovery of a new type of Martian polar terrain, called undulating plain, is reported and the evolution of the plains and other areas of the Martian polar region is discussed in terms of the trapping of dust by the perennial ice cover. High-resolution Viking Orbiter 2 observations of the north polar terrain reveal perennially ice-covered surfaces with low relief, wavelike, regularly spaced, parallel ridges and troughs (undulating plains) occupying areas of the polar terrain previously thought to be flat, and associated with troughs of considerable local relief which exhibit at least partial annual melting. It is proposed that the wavelike topography of the undulating plains originates from long-term periodic variations in cyclical dust precipitation at the margin of a growing or receding perennial polar cap in response to changes in insolation. The troughs are proposed to originate from areas of steep slope in the undulating terrain which have lost their perennial ice cover and have become incapable of trapping dust. The polar landscape thus appears to record the migrations, expansions and contractions of the Martian polar cap.

Cutts, J. A.↗
NASA NTRS1978

Effect of copper impurity on polycrystalline silicon solar cells

The presence of copper impurity, up to 10 to the 15th atoms/cc, in single crystal silicon has been shown to have no deleterious effect on the p-n junction solar cell performance. However, in polycrystalline silicon, copper atoms tend to migrate to the defect sites because of the structural sensitive properties of copper. This study was undertaken to investigate the influence of this behavior of copper impurity on the performance of p-n junction solar cells fabricated from structurally imperfect silicon. Two sets of polycrystalline silicon substrates containing copper were examined. In one set of samples, copper was incorporated during growth, whereas in the other, copper was diffused. Solar cells were fabricated on both the sets of substrates by a standard process. Dark and light I-V and spectral response characteristics of the cells were measured and compared with copper-free polycrystalline silicon solar cells. The results and the model are discussed.

Daud, T.↗
NASA NTRS1979

Bubble behavior during solidification in low gravity

The trapping and behavior of gas bubbles were studied during low-gravity solidification of carbon tetrabromide, a transparent metal-model material. The experiment was performed during a NASA-sponsored sounding rocket flight and involved gradient freeze solidification of a gas-saturated melt. Gas bubbles were evolved at the solid-liquid interface during the low-gravity interval. No large-scale thermal migration of bubbles, bubble pushing by the solid-liquid interface, or bubble detachment from the interface were observed during the low-gravity experiment. A unique bubble motion-fluid flow event occurred in one specimen: a large bubble moved downward and caused some circulation of the melt. The gas bubbles that were trapped by the solid in commercial-purity material formed voids that had a cylindrical shape, in contrast to the spherical shape that had been observed in a prior low-gravity experiment. These shapes were not influenced by the gravity level (0.0001 g-0 vs g-0), but were dependent upon the initial temperature gradient. In higher purity material, however, the shape of the voids changed from cylindrical in 1g to spherical in low gravity.

Papazian, J. M.↗
NASA NTRS1981

Improved cell for water-vapor electrolysis

Continuous-flow electrolytic cells decompose water vapor in steam and room air into hydrogen and oxygen. Sintered iridium oxide catalytic anode coating yields dissociation rates hundredfold greater than those obtained using platinum black. Cell consists of two mirror-image cells, with dual cathode sandwiched between two anodes. Gas traverses serpentine channels within cell and is dissociated at anode. Oxygen mingles with gas stream, while hydrogen migrates through porous matrix and is liberated as gas at cathode.

Aylward, J. R.↗
NASA NTRS1979

Flow on Magnetizable Particles in Turbulent Air Streams

The flow of magnetizable particles in a turbulent air stream in the presence of an imposed magnetic field and the phenomenon of drag reduction produced by the introduction of particles in turbulent boundary layer are investigated. The nature of the particle magnetic force is discussed and the inherent difference between electric and magnetic precipitation is considered. The incorporation of turbulent diffusion theory with an imposed magnetic migration process both with and without inertia effects is examined.

Davey, K. R.↗
NASA NTRS1977

Electrophoretic fractional elution apparatus employing a rotational seal fraction collector

Electrophoretic fractional elution apparatus which has a column with a rotating seal joint is described. A thin jet of eluting buffer is directed across the lumen of the electrophoretic column in a direction perpendicular to that of electrophoretic migration. Either the content of the column is rotated with respect to the stationary jet, or the jet is rotated with respect to the column. The system may employ electrophoresis either in free solution or in packed columns.

Bier, M.↗
NASA NTRS1980

Radiation damage in lithium-counterdoped n/p silicon solar cells

Lithium counterdoped n+/p silicon solar cells were irradiated with 1 MV electrons and their post irradiation performance and low temperature annealing properties were compared to that of the 0.35 ohm cm control cells. Cells fabricated from float zone and Czochralski grown silicon were investigated. It was found that the float zone cells exhibited superior radiation resistance compared to the control cells, while no improvement was noted for the Czochralski grown cells. Room temperature and 60 C annealing studies were conducted. The annealing was found to be a combination of first and second order kinetics for short times. It was suggested that the principal annealing mechanism was migration of lithium to a radiation induced defect with subsequent neutralization of the defect by combination with lithium. The effects of base lithium gradient were investigated. It was found that cells with negative base lithium gradients exhibited poor radiation resistance and performance compared to those with positive or no lithium gradients; the latter being preferred for overall performance and radiation resistance.

Hermann, A. M.↗
NASA NTRS1980

Method for separating biological cells

A method for separating biological cells by suspending a mixed cell population in a two-phase polymer system is described. The polymer system consists of droplet phases with different surface potentials for which the cell populations exhibit different affinities. The system is subjected to an electrostatic field of sufficient intensity to cause migration of the droplets with an attendant separation of cells.

Brooks, D. E.↗
NASA NTRS1980

The 737 graphite composite flight spoiler flight service evaluation

The flight service experience of 111 graphite-epoxy spoilers on 737 transport aircraft and related ground based enviromental exposure of graphite-epoxy material specimens is reported. Spoilers were installed on 28 aircraft representing seven major airlines operating throughout the world. Over 1,188,367 spoiler flight hours and 1,786,837 spoiler landings were accumulated by this fleet. Tests of removed spoilers and ground-based exposure specimens after the fifth year of service indicate modest changes in composite strength properties. Two incidents of trailing edge delamination with subsequent core corrosion were observed. Based on visual, ultrasonic, and destructive testing, there has been no evidence of moisture migration into the honeycomb core and no core corrosion.

Hoffman, D. J.↗
NASA NTRS1979

SPAR 5 experiment no. 74-30 agglomeration in immiscible liquids

The influence of gravity, cooling rate, and composition on the macro-and microstructure of liquid phase immiscible alloys were researched. Aluminum indium alloys of compositions 30, 40, 70, and 90 weight percent indium were processed aboard two sounding rocket flights, SPAR 2 and SPAR 5. Radiographic and metallographic examination of the SPAR 2 flight and ground base samples showed the expected separation at lg of the ground base alloys into indium rich and aluminum rich layers. The flight alloys produced an aluminum rich core surrounding by indium rich metal. The results obtained from the SPAR 5 40 and 70 weight percent indium alloys were essentially identical to those from SPAR 2. The 30 and 90 weight percent indium alloys also showed massive separation into configuration similar to the 40 and 70 weight percent indium alloys. The 90 weight percent indium alloy showed additional evidence that surface tension induced droplet migration had occurred in this alloy which could at least in part account for the observed structures.

Gelles, S.↗