Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Additive Manufacturing of Thermal Energy Storage Composites with Microencapsulated Phase Change Materials Supported in a Multi-Polymer Matrix

Advanced manufacturing techniques, such as additive manufacturing (AM), that can directly integrate phase change materials (PCMs) have garnered interest in recent years due to their potential for development of highly efficient thermal energy storage architectures. Complex, high surface area geometries embedded with PCMs that are only feasible with AM can improve thermal management with reduced material waste. Our work focuses on developing composite filaments with microencapsulated phase change materials (MEPCM) bound within a single or dual polymer matrix that can be processed through standard filament extruders and additively manufactured using off-the-shelf 3D printers. Polymer powders, rather than polymer pellets, were key to homogenously mixed filaments achieving high MEPCM loadings with no deterioration in thermal energy storage (TES) capability during extrusion. Composite filaments contain upwards of 60 wt% MEPCM and were printed without loss in feature resolution, print speed, or layer adhesion. Storage enthalpies of printed composites range from 100 - 130 kJ/kg, which were within 5% of the theoretical enthalpy based on weight fraction of MEPCM and maintained enthalpies within 1% over 500 thermal cycles. We can reliably manufacture low density, high surface area structures like 15% gyroid infill, along with dense, compact pucks at a 100% concentric infill. Prints were also scalable to a 900 cm3 honeycomb infill heat exchanger model that has an estimated energy storage capacity of 9 Wh.

3D printing↗
DOE OSTI2024

autoGEMM: Pushing the Limits of Irregular Matrix Multiplication on Arm Architectures

This paper presents an open-source library that pushes the limits of performance portability for irregular General Matrix Multiplication (GEMM) on the widely-used Arm architectures. Our library, autoGEMM, is designed to support a wide range of Arm processors: from edge devices to HPC-grade CPUs. autoGEMM generates optimized kernels for various hardware configurations by auto-combining fragments of autogenerated micro-kernels that employ hand-written optimizations to maximize computational efficiency. We optimize the kernel pipeline by tuning the register reuse and the data load/store overlapping. In addition, we use a dynamic tiling scheme to generate balanced tile shapes. Finally, we position autoGEMM on top of the TVM framework where our dynamic tiling scheme prunes the search space for TVM to identify the optimal combination of parameters for code optimization. Evaluations on five different classes of Arm chips demonstrate the advantages of autoGEMM. For small matrices, autoGEMM achieves 98% of peak and up to 2.0x speedup over state-of-the-art libraries such as LIBXSMM and LibShalom. For irregular matrices (i.e. tall skinny and long rectangles), autoGEMM is 1.3-2.0x faster than widely-used libraries such as OpenBLAS and Eigen. autoGEMM is publicly available at: https://github.com/wudu98/autoGEMM.

Wu, Du↗
DOE OSTI2024

Additive manufacturing process for producing aluminum-boron carbide metal matrix composites

A method for additive manufacturing of a composite object containing a bonded network of boron carbide particles and aluminum occupying spaces between boron carbide particles, the method comprising: (i) producing a porous preform constructed of boron carbide by an additive manufacturing process in which particles of boron carbide are bonded together; and (ii) infiltrating molten aluminum, at a temperature of 1000-1400° C., into pores of said porous preform to produce said composite object constructed of boron carbide particles within an aluminum matrix, wherein the boron carbide is present in the composite object in an amount of 30-70 wt. %. The resulting composite material is also herein described.

Cramer, Corson L.↗
DOE OSTI2024

Simple and Robust Carrier-Based PWM Technique for Single-Stage Three-phase Rectifier Indirect Matrix Converter

Indirect matrix converters (IMC) can offer high efficiency, high power density, and bidirectional power flow capability with a single-stage three-to single-phase AC-AC power conversion integrating a conventional three-phase active rectifier with a primary side full-bridge inverter of a dual active bridge converter. However, the IMCs generally require space vector modulation techniques, leading to complex sectors and dwell times calculations. A practical implementation of the modulation methods with a commonly used digital signal processor becomes even more challenging when considering power factor correction, harmonics reduction, and deadtime between sector transitions. This paper proposes a simple and robust carrier-based pulse width modulation (PWM) technique determined through a voltage-source inverter (VSI) to current-source inverter (CSI) to IMC conversion. This translation enables the adoption of all conventional VSI control methods with active and reactive power control in the IMCs through simple carrier and reference waveform comparison. The VSI vectors are first one-on-one matched with CSI vectors and translated to IMC modulation signals without calculating sectors and dwell times. Nine different carrier waveforms are proposed, and the converter performance is analyzed. Grid current THD and efficiency are estimated for each modulation method. The symmetric A and B methods had the lowest THD of the grid current, 2.80%, and the efficiency remained at approximately 98.3%, making it the most suitable carrier-based method proposed in this paper. The space vector PWM (SVPWM) modulation method was implemented to the DSP and generated the expected twelve gate signals.

Benson, Mikayla↗
DOE OSTI2026

The Myth of Fungible FTE: A Quantitative Assessment of Matrixed Resource Allocation

Matrix organizations allow scientific facilities to share specialized personnel across projects, operations, maintenance, and strategic initiatives. Nominal staffing allocations, however, may not capture the schedule consequences of fragmented individual commitments, limited access to specialist groups, and intermittent availability of key decision makers. We developed a stochas- tic, daily-time-step simulation of a hypothetical medium-sized accelerator-facility project com- prising sequential phases and parallel tasks. Each task requires role-specific work measured in FTE-days. Ordinary personnel may be unavailable because they contribute concurrently to other institutional activities, while designated key roles have independently specified daily un- availability probabilities. An organization-wide priority factor scales the number of people from each functional group who can effectively contribute to the project. It is interpreted as a composite proxy for project access and workforce fragmentation across competing commit- ments. We examined project completion time as a function of this factor and Project Lead unavailability using 100 Monte Carlo runs per condition. Increasing priority factor from 0.1 to 1.0 reduced median completion time from 1708.5 days (interquartile range 1681.5–1735.25) to 390 days (interquartile range 379–399). At priority factor = 0.1, increasing Project Lead unavailability from 0.5 to 0.9 increased median completion time from 1713.5 days (interquartile range 1691–1733.25) to 4,417 days (interquartile range 4271.75–4550.5). The model quantifies the commonly expected sensitivity of project schedules to fragmented resource commitments and limited coordination availability. Within this model, the results also indicate a possible threshold regime in which small increases in workforce availability yield only modest sched- ule improvements until sufficient capacity becomes accessible, after which project performance improves sharply. With further validation and calibration, this quantitative framework could support resource-allocation decisions during initial project planning and subsequent schedule rebaselining.

Bai, Mei [SLAC National Accelerator Laboratory (SL↗
DOE OSTI2020

Matrix-free subcell residual distribution for Bernstein finite elements: Monolithic limiting

This paper is focused on the aspects of limiting in residual distribution (RD) schemes for high-order finite element approximations to advection problems. Both continuous and discontinuous Galerkin methods are considered in this work. Discrete maximum principles are enforced using algebraic manipulations of element contributions to the global nonlinear system. The required modifications can be carried out without calculating the element matrices and assembling their global counterparts. The components of element vectors associated with the standard Galerkin discretization are manipulated directly using localized subcell weights to achieve optimal accuracy. Low-order nonlinear RD schemes of this kind were originally developed to calculate local extremum diminishing predictors for flux-corrected transport (FCT) algorithms. In the present paper, we incorporate limiters directly into the residual distribution procedure, which makes it applicable to stationary problems and leads to well-posed nonlinear discrete problems. To circumvent the second-order accuracy barrier, the correction factors of monolithic limiting approaches and FCT schemes are adjusted using smoothness sensors based on second derivatives. Finally, the convergence behavior of presented methods is illustrated by numerical studies for two-dimensional test problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

A linear surrogate for optimising functions of an orthogonal matrix with applications in wave function theory

The technique of surrogate optimisation is to use a simpler function to approximate a complex function that is time-consuming to evaluate. Here we show that the maximum of a special type of surrogate function f(U)=Tr(AU),UϵO(n) is at A T (AA T ) 1/2 , and that there is one and only one local maximum both in SO(n) and O(n)–SO(n). This function f(U) has been found to be useful in various aspects of electronic structure theory, including proving the Carlson-Keller theorem, and localising orbitals. As one other example, we apply it here to optimise the ground state of molecules using the Generalised Valence Bond wavefunction.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Role of matrix elements in the time-resolved photoemission signal

Time- and angle-resolved photoemission spectroscopy (TR-ARPES) provides access to the ultrafast evolution of electrons andmany-body interactions in solid-state systems. However, themomentum- and energy-resolved transient photoemission intensitymay not be unambiguously described by the intrinsic relaxation dynamics of photoexcited electrons alone.The interpretation of the time-dependent photoemission signal can be affected by the transient evolution of the electronic distribution, and both the one-electron removal spectral function aswell as the photoemissionmatrix elements. Here we investigate the topological insulator Bi 1.1 Sb 0.9 Te 2 S to demonstrate, bymeans of a detailed probe-polarization dependent study, the transient contribution ofmatrix elements toTR-ARPES.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗