Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROWAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

A Compact Monolithic Electro-Optic Package for Quantum Microwave-to-Optical Transduction

We present a novel quantum transduction package that integrates a macroscopic electro-optic crystal into a compact, monolithic assembly designed for superconducting quantum processors. The device provides an efficient and scalable interface between microwave and optical domains while preserving cryogenic compatibility. We performed full-wave and quantum dynamical simulations to assess the performance of the hybrid system, focusing on the interaction between a transmon-based microwave cavity and the crystal’s and cavity low-frequency microwave mode. The transmon operates both as an ancilla for the QPU and as a nonlinear element enabling four-wave mixing between cavity and electro-optic crystal microwave fields. Our results indicate that this architecture can coherently mediate quantum information transfer from the cavity to the electro-optic mode, offering a promising platform for on-chip quantum transduction within superconducting quantum networks.

Reineri, Alessandro [Fermilab] (ORCID:000000016175↗

A Compact Monolithic Electro-Optic Package for Quantum Microwave-to-Optical Transduction

We present a novel quantum transduction package that integrates a macroscopic electro-optic crystal into a compact, monolithic assembly designed for superconducting quantum processors. The device provides an efficient and scalable interface between microwave and optical domains while preserving cryogenic compatibility. We performed full-wave and quantum dynamical simulations to assess the performance of the hybrid system, focusing on the interaction between a transmon-based microwave cavity and the crystal’s and cavity low-frequency microwave mode. The transmon operates both as an ancilla for the QPU and as a nonlinear element enabling four-wave mixing between cavity and electro-optic crystal microwave fields. Our results indicate that this architecture can coherently mediate quantum information transfer from the cavity to the electro-optic mode, offering a promising platform for on-chip quantum transduction within superconducting quantum networks.

Reineri, Alessandro [Fermilab] (ORCID:000000016175↗

Assessing the accuracy of microwave radiometers and radio acoustic sounding systems for wind energy applications

To assess current remote-sensing capabilities for wind energy applications, a remote-sensing system evaluation study, called XPIA (eXperimental Planetary boundary layer Instrument Assessment), was held in the spring of 2015 at NOAA's Boulder Atmospheric Observatory (BAO) facility. Several remote-sensing platforms were evaluated to determine their suitability for the verification and validation processes used to test the accuracy of numerical weather prediction models. The evaluation of these platforms was performed with respect to well-defined reference systems: the BAO's 300 m tower equipped at six levels (50, 100, 150, 200, 250, and 300 m) with 12 sonic anemometers and six temperature ( T ) and relative humidity (RH) sensors; and approximately 60 radiosonde launches. In this study we first employ these reference measurements to validate temperature profiles retrieved by two co-located microwave radiometers (MWRs) as well as virtual temperature ( T v ) measured by co-located wind profiling radars equipped with radio acoustic sounding systems (RASSs). Results indicate a mean absolute error (MAE) in the temperature retrieved by the microwave radiometers below 1.5 K in the lowest 5?km of the atmosphere and a mean absolute error in the virtual temperature measured by the radio acoustic sounding systems below 0.8 K in the layer of the atmosphere covered by these measurements (up to approximately 1.6-2 km). We also investigated the benefit of the vertical velocity correction applied to the speed of sound before computing the virtual temperature by the radio acoustic sounding systems. We find that using this correction frequently increases the RASS error, and that it should not be routinely applied to all data. Water vapor density (WVD) profiles measured by the MWRs were also compared with similar measurements from the soundings, showing the capability of MWRs to follow the vertical profile measured by the sounding and finding a mean absolute error below 0.5 g m -3 in the lowest 5 km of the atmosphere. However, the relative humidity profiles measured by the microwave radiometer lack the high-resolution details available from radiosonde profiles. Furthermore, an encouraging and significant finding of this study was that the coefficient of determination between the lapse rate measured by the microwave radiometer and the tower measurements over the tower levels between 50 and 300 m ranged from 0.76 to 0.91, proving that these remote-sensing instruments can provide accurate information on atmospheric stability conditions in the lower boundary layer.

17 WIND ENERGY↗

Emission characteristics of snow and ice in the microwave range

Some results are presented of a two year investigation on microwave emissions from snow. Included in the investigation were: theoretical studies; laboratory measurements of electrical properties of snow and similar materials; numerical modelling of hypothetical and real snowpacks; analysis of microwave data obtained on everflights; and quantative measurements of natural and artificial snowpacks made in the field. Results indicate that a fairly simple combination of microwave polarizations and frequencies can ultimately be used to monitor the water equivalent and free-water content as well as the distribution of snow. This understanding may also shed light on the physics of microwave emission from other wet, granular, layered media.

Meier, M. F.↗

Subsurface discontinuity detection by microwave radiometry.

Brief description of a joint program undertaken near Austin and San Antonio, Tex., to detect the presence of subsurface voids such as caverns and tunnels by microwave radiometry. Mi crowave radiometric temperature measurements using both vertical and horizontal polarization were taken with fixed-view angle traverses across three sites at two locations. No unambiguous correlation between the microwave temperature contours and the subsurface voids was observed at either location, but a correlation between microwave temperature and moisture patterns was observed at both locations. The large microwave temperature anomalies observed at all three sites indicated a sensitivity to near-surface structure and moisture distribution. A close correlation was noted between low soil-bearing strength values and the tunnel location at the San Antonio site.

Hruby, R. J.↗

Short-duration solar microwave bursts and associated soft X-ray emission

Two hundred and fifty-nine short-duration microwave (15.4 GHz) bursts which occurred during the period of January 1968 to March 1970 were correlated with possible soft X-ray (2-12 A) flares occurring simultaneously. Sixty-six percent of the microwave bursts which were observed during periods of soft X-ray data coverage had associated soft X-ray flares. A study of an index of impulsiveness of the microwave flares failed to show a separation of the events into subclasses which could be attributed to distinctly different physical mechanisms. A weak (0.43) correlation was found between the intensities of the microwave and X-ray flares. A very weak (0.15) and statistically questionable correlation was found between the total energy released in these two energy ranges. Two models for the electron acceleration mechanism are discussed.

Spangler, S. R.↗

Investigation of microwave hologram techniques for application to earth resources

An investigation of microwave hologram techniques for application to earth resources was conducted during the period from June 1971 to November 1972. The objective of this investigation has been to verify the feasibility of an orbital microwave holographic radar experiment. The primary advantage of microwave hologram radar (MHR) over the side-looking airborne radar (SLAR) is that of aspect or viewing angle; the MHR has a viewing angle identical with that of photography and IR systems. The combination of these systems can thus extend the multispectral analysis concept to span optical through microwave wavelengths. Another advantage is the capacity of the MHR system to generate range contours by operating in a two-frequency mode. It should be clear that along-track resolution of an MHR can be comparable with SLAR systems, but cross-track resolution will be approximately an order of magnitude coarser than the range resolution achievable with an arbitrary SLAR system. An advantage of the MHR over the SLAR is that less average transmitter power is required. This reduction in power results from the much larger receiving apertures associated with MHR systems.

Larson, R. W.↗

Microwave remote sensing of soil water content

Microwave remote sensing of soils to determine water content was considered. A layered water balance model was developed for determining soil water content in the upper zone (top 30 cm), while soil moisture at greater depths and near the surface during the diurnal cycle was studied using experimental measurements. Soil temperature was investigated by means of a simulation model. Based on both models, moisture and temperature profiles of a hypothetical soil were generated and used to compute microwave soil parameters for a clear summer day. The results suggest that, (1) soil moisture in the upper zone can be predicted on a daily basis for 1 cm depth increments, (2) soil temperature presents no problem if surface temperature can be measured with infrared radiometers, and (3) the microwave response of a bare soil is determined primarily by the moisture at and near the surface. An algorithm is proposed for monitoring large areas which combines the water balance and microwave methods.

Cihlar, J.↗

Remote sensing of soil moisture with microwave radiometers

Results are presented that were derived from measurements made by microwave radiometers during the March 1972 and February 1973 flights of National Aeronautics and Space Administration (NASA) Convair-9900 aircraft over agricultural test sites in the southwestern part of United States. The purpose of the missions was to study the use of microwave radiometers for the remote sensing of soil moisture. The microwave radiometers covered the 0.8- to 21-cm wavelength range. The results show a good linear correlation between the observed microwave brightness temperature and moisture content of the 0- to 1-cm layer of the soil. The results at the largest wavelength (21 cm) show the greatest sensitivity to soil moisture variations and indicate the possibility of sensing these variations through a vegetative canopy. The effect of soil texture on the emission from the soil was also studied and it was found that this effect can be compensated for by expressing soil moisture as a percent of field capacity for the soil. The results were compared with calculations based on a radiative transfer model for layered dielectrics and the agreement is very good at the longer wavelengths. At the shorter wavelengths, surface roughness effects are larger and the agreement becomes poorer.

Schmugge, T.↗

JPL field measurements at the Finney County, Kansas, test site, October 1976: Ground-based microwave radiometric measurements

Microwave brightness temperature measurements were made as part of the Joint Soil Moisture Experiment. These measurements are reported with a description of the JPL microwave radiometry van facility. The data will be used with ground truth data from the test site and microwave data from aircraft overflights to investigate the potential of microwave radiometry for soil moisture remote sensing under field conditions.

Njoku, E. G.↗

Space-borne power conversion into a microwave beam and its impact on the environment of the upper atmosphere

The possible effect of microwave beams transmitted from Solar Power Satellites on the ionosphere has been studied theoretically. Particular attention is given to microwave-beam-heating of the F and D layers and theoretical predictions of such ionospheric modifications are used to determine resulting effects on the transmission efficiency of communication and navigation systems. It is recommended that a three-pronged technology and demonstration program be established to study microwave effects. The program would include theoretical studies, ground-based heating experiments, and an orbital experimental program for phase control of the microwave power transmission system.

Maynard, O. E.↗

Estimation of snow temperature and mean crystal radius from remote multispectral passive microwave measurements

Variation in crystal size and physical temperature of snowfield observations from space give large variations in the microwave brightness temperature. Since the brightness temperature is a function of wavelength, the microwave brightness temperature can be used to extract the snow temperature and mean crystal radius profiles. The Scanning Multichannel Microwave Radiometer (SMMR), to be launched on board the Nimbus-G and Seasat-A spacecraft, will make observations in wavelengths of 0.8, 1.4, 1.7, 2.8, and 4.6 cm. A statistical retrieval method was developed to determine the snowfield temperature profile and mean crystal size by using the scanning multifrequency microwave radiometer on board a spacecraft. The estimated errors for retrieval are approximately 1.5 K for temperature and 0.001 for crystal radius in the presence of 1 K rms noise for each SMMR channel.

Chang, A. T. C.↗

Wide power range microwave feedback controller

A substantially constant power level is derived over a predetermined frequency band, in each of a plurality of relatively widely spaced power ranges, from a microwave load having a predetermined amplitude versus frequency response, such as an antenna. A microwave source of substantially constant amplitude drives a forward path connected between the source and the load. A feedback path responsive to the microwave power level in the forward path derives a control voltage for the PIN attenuator. The equalizer attenuator drives a linear, crystal amplitude detector. Attenuating means included in the forward and feedback paths are selectively connected in circuit to maintain the power level of the microwave input to the amplitude detector substantially constant, even though different power ranges are supplied to the load by the forward path.

Titus, L. E.↗

Interpretation of observed cosmic microwave background radiation

The Alfven and Mendis (1977) conclusion that dust grains in galaxies render the universe opaque to cosmic microwave background at a red shift ratio equal to 40 is challenged by a calculation of the opacity of galactic dust grains to the microwave background radiation from the time of decoupling at emission red shift ratio equal to 1500 to the present in the standard big bang model. In the present calculation, evolutionary effects on grain opacity and abundance are estimated. At wavelengths used in studying the microwave background, the optical depth of the grains is found to be 0.18 when the deceleration parameter equals 0.03, and 0.05 when the deceleration parameter equals 0.5. The results indicate that microwave background can provide information on an early dense phase of the universe.

Pollaine, S.↗

The beamed power microwave transmitting antenna

Beamed power refers to radiation techniques employing directional antennas for purposes of transferring energy in microwave form from one place to another. The peaceful uses of beamed power as applied to electric utilities functions and transportation concepts are considered. An investigation is conducted regarding the design approaches and techniques which can be used by the microwave component engineer to render beamed power systems potentially safe for humans and other biota. High-power microwave transmission antennas are proposed for beaming power from earth-orbiting satellites to receiving antennas (rectennas) on earth. Other applications include beaming power to run helicopters, aircraft, and aerostats equipped with rectennas. System designs must provide for techniques to yield microwave radiation levels that do not exceed allowable limits. Attention is given to beam surveillance techniques and the effects of an implementation of these techniques on the beamed power systems.

Dickinson, R. M.↗

Microwave sensing from orbit

Microwave sensors, used in conjunction with the traditional sensors of visible and infrared light to extend present capabilities of global weather forecasts and local storm watches, are discussed. The great advantage of these sensors is that they can penetrate or 'see' through cloud formations to monitor temperature, humidity and wind fields below the clouds. Other uses are that they can penetrate the earth deeper than optical and IR systems; they can control their own angle of incidence; they can detect oil spills; and they can enhance the studies of the upper atmosphere through measurement of temperature, water vapor and other gaseous species. Two types of microwave sensors, active and passive, are examined. Special attention is given to the study of the microwave radiometer and the corresponding temperature resolution as detected by the antenna. It is determined that not only will the microwave remote sensors save lives by allowing close monitoring of developing storms, but also save approximately $172 million/year.

Kritikos, H. N.↗

Microwave approaches in hydrology

The microwave approaches for remote sensing of soil moisture centent, snowpack properties, surface water area, and the detection of precipitation over land are discussed. Both active (radar) and passive (radiometry) approaches are considered, and the advantages of microwave sensing are pointed out, including all-weather capability, especially at the longer wavelengths, and greater penetration depth with optical or infrared sensors. Results obtained from ground-based, aircraft, and spacecraft platforms show that microwave systems can monitor the moisture content in the surface soil layer (5 cm thick), and that passive microwave systems can discriminate between light and heavy snowcover, detect the presence of liquid water in the snow, and qualitatively estimate snow water equivalent.

Schmugge, T. J.↗

Microwave integrated circuit for Josephson voltage standards

A microwave integrated circuit comprised of one or more Josephson junctions and short sections of microstrip or stripline transmission line is fabricated from thin layers of superconducting metal on a dielectric substrate. The short sections of transmission are combined to form the elements of the circuit and particularly, two microwave resonators. The Josephson junctions are located between the resonators and the impedance of the Josephson junctions forms part of the circuitry that couples the two resonators. The microwave integrated circuit has an application in Josephson voltage standards. In this application, the device is asymmetrically driven at a selected frequency (approximately equal to the resonance frequency of the resonators), and a d.c. bias is applied to the junction. By observing the current voltage characteristic of the junction, a precise voltage, proportional to the frequency of the microwave drive signal, is obtained.

Holdeman, L. B.↗