Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Linear response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

DQ Admittance Extraction for Inverter-Based Resources: Preprint

The power grid industry is pushing for electro-magnetic transient (EMT)-based studies for generation interconnection and planning process due to high penetrations of inverter-based resource (IBRs). Vendor-specific and site-specific black-box IBR models are preferred in those simulation studies. For small-signal analysis, measurement-based admittance models are necessary. In this paper, we demonstrate the extraction of frequency-domain dq frame IBR models. These linear models are specific to operating conditions. We demonstrate two extraction methods: frequency scan and a step response-based method. The latter relies on converting time-domain responses to Laplace-domain expressions via eigensystem realization analysis (ERA). Both can lead to dq admittance representation and the latter is time saving.

admittance model↗
DOE OSTI2023

Active tether control for a tethered multirotor

A control system and method for tensioning an active tether for a multirotor unmanned aerial system is provided. The control system includes a tensioning pulley and a tensioning spring. The tensioning spring is arranged to generate a variable tension force on the active tether. A transducer is connected adjacent to the tensioning spring to sense a linear displacement position of the tensioning pulley and to transmit a position signal to a controller. The position signal is proportional to the linear displacement position. A servomotor in communication with the controller receives a control signal from the controller in response to the position signal. The servomotor drives a cable reel. The cable reel is rotatably mounted in the frame for spooling the tether in response to rotation of the servomotor. The cable reel is rotated by the servomotor to maintain a predetermined tension on the tensioning spring.

Callow, Diane Schafer↗
DOE OSTI2023

Global-Local Policy Search and its Application in Grid-Interactive Building Control

As the buildings sector represents over 70% of the total U.S. electricity consumption, it offers a great amount of untapped demand-side resources to tackle many critical grid-side problems and improve the overall energy system's efficiency. To help make buildings grid-interactive, this paper proposes a global-local policy search method to train a reinforcement learning (RL) based controller which optimizes building operation during both normal hours and demand response (DR) events. Experiments on a simulated five-zone commercial building demonstrate that by adding a local fine-tuning stage to the evolution strategy policy training process, the control costs can be further reduced by 7.55% in unseen testing scenarios. Baseline comparison also indicates that the learned RL controller outperforms a pragmatic linear model predictive controller (MPC), while not requiring intensive online computation.

demand response↗
DOE OSTI2026

Orbital Inverse Faraday and Cotton-Mouton Effects in Hall Fluids

We report two light-induced orbital magnetization effects in quantum Hall (QH) fluids, stemming from their transverse response. The first is a purely transverse contribution to the inverse Faraday effect (IFE), where circularly polarized light induces a dc magnetization by stirring the charged fluid. This contribution dominates the IFE in the QH regime. The second is the orbital inverse Cotton-Mouton effect (ICME), in which linearly polarized light generates a dc magnetization. Since the applied field in the ICME does not break time-reversal symmetry, the induced magnetization directly probes the chiral orbital response of the fluid at the driving frequency. We estimate that the resulting magnetization lies in the range of 0.5–10 Bohr magnetons per charge carrier in materials such as graphene and transition-metal dichalcogenides (TMDs) in the QH regime. Finally, we show that the induced magnetization is accompanied by a local correction to the static particle density, enabling optical quantum printing of density profiles into the QH fluid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Cyclic versus Linear Alkylammonium Cations: Preventing Phase Transitions at Operational Temperatures in 2D Perovskites

Two-dimensional lead halide perovskites offer numerous attractive features for optoelectronics owing to their soft, deformable lattices and high degree of chemical tunability. While alteration of the metal and halide ions gives rise to significant modification of the bandgap energy, the organic spacer cations offer in-roads to tuning phase behavior and more subtle functionalities in ways that remain to be understood. Here, we study six variations of 2D perovskites changing only the organic spacer cations and demonstrate that these components intrinsically impact material response in important ways such as altering crystallographic structure, temperature-induced phase transitions, and photoluminescence emission. Two-dimensional perovskites containing commonly utilized aliphatic linear spacers, such as butylammonium, undergo phase transitions near room temperature. These transitions and temperature changes induce spacer-dependent variations in the emission spectra. Conversely, 2D perovskites comprising cyclic aliphatic spacers, such as cyclobutylammonium, are found to lack first-order phase transitions. These cyclic molecules are more sterically hindered within the crystal lattice, leading to temperature-induced contraction or expansion along certain crystallographic planes but no other significant thermal effects; additionally, they undergo changes in their emission spectra that cannot be explained by simple thermal expansion. Finally, given the similarities in the dielectric and chemical makeup of this set of six alkylammonium molecules, these results are unexpected and suggest a large structural and thermal phase space via spacer manipulation that could lead to improved 2D perovskite functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Contrasting Responses of Soil Inorganic Carbon to Afforestation in Acidic Versus Alkaline Soils

Afforestation is recommended as an effective approach for carbon sequestration and environmental benefits. However, it remains less clear, and sometimes controversial, regarding how afforestation may impact soil inorganic carbon (SIC), a crucial component of the ecosystem carbon pool. Here, using field data from 619 afforested plots and 163 control plots across northern China, we investigated the relative and absolute differences in SIC between afforested and corresponding control plots. Our results suggested that afforestation increased SIC in acidic soils, while decreased SIC in alkaline soils. Fitting a linear mixed model and further a structure equation model, we found that afforestation-induced soil pH change was the most significant factor regulating SIC responses. In particular, SIC was more sensitive to pH change in more arid areas, where both soil pH and SIC stocks were high. Other factors could indirectly affect SIC responses to afforestation through modulating soil pH and soil organic carbon (SOC) dynamics. Moreover, afforestation-induced SIC changes also varied considerably among different species of tree plantations and across different soil depths. Importantly, in plantations of Pinus sylvestris var. mongholica, Pinus tabuliformis, and Populus spp., changes in SIC caused by afforestation were even comparable to that in SOC. Overall, our findings provide a data-based understanding on the comprehensive soil carbon dynamics following afforestation and its underlying mechanisms. With the increased use of afforestation and reforestation as nature-based solutions to climate change, their associated impacts on SIC need to be taken into account, especially in SIC-rich areas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Modification of the MTS model for high strain-rate behavior of TI-6AL-4V

The Mechanical Threshold Stress (MTS) model provides excellent predictive capabilities for the material constitutive response for a wide range of temperatures and strain rates. However, the MTS model fails to capture the rapidly increasing yield stress at high strain rate behavior as the deformation controlling mechanism transitions from thermal activation to drag mechanisms, only capturing the linear behavior. Further, the model typically over predicts the flow stress behavior at yield and post yield due to its use of a constant work hardening rate parameter derived from the stress–strain response at constant saturation stress. An alternative approach to fitting portions of the MTS model is investigated and mathematical models are developed to address these issues. The results show that with appropriate experimental data, the mechanical threshold stress and work hardening rate parameters within the MTS model can quite easily and accurately be modified to extend applicability to high strain rate behavior and more accurately model the initial flow stress behavior at early work hardening rates without modification of the functions core to the MTS model itself.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Design and Development of a Particle Flow Control Mechanism for Particle-Based CSP System Applications

Within particle-based Concentrated Solar Power Systems (CSP), particles are the heat transfer medium, and therefore, the heat transfer effectiveness of these systems is reliant on their ability to effectively control particle mass flow rate. The vast majority of approaches for particle flow control in high temperature CSP is based on a slide-gate approach where a gate is linearly actuated across a tear-drop shaped opening. The slide-gate mechanism has a sensitivity of 0.354 g/s-mm, which is defined as the mass flow rate over the position of the gate. In the present work, we have designed and tested a new particle flow control mechanism with the potential for faster response times and different sensitivities than a slide gate approach enabling more control of particle flow. The new device enables flow control through moving jaws diagonally to change the outlet area. The new devices sensitivity value follows a quadratic curved as compared to the slide-gate’s linear slope over the same jaw movement. A larger sensitivity value is directly related to a quicker response time when utilizing the same actuator.

14 SOLAR ENERGY↗
DOE OSTI2023

Optimal white-noise stochastic forcing for linear models of turbulent channel flow

In the present study an optimisation problem is formulated to determine the forcing of an eddy-viscosity-based linearised Navier–Stokes model in channel flow at $Re_\tau \approx 5200$ ( $Re_\tau$ is the friction Reynolds number), where the forcing is white-in-time and spatially decorrelated. The objective functional is prescribed such that the forcing drives a response to best match a set of velocity spectra from direct numerical simulation (DNS), as well as remaining sufficiently smooth. Strong quantitative agreement is obtained between the velocity spectra from the linear model with optimal forcing and from DNS, but only qualitative agreement between the Reynolds shear stress co-spectra from the model and DNS. The forcing spectra exhibit a level of self-similarity, associated with the primary peak in the velocity spectra, but they also reveal a non-negligible amount of energy spent in phenomenologically mimicking the non-self-similar part of the velocity spectra associated with energy cascade. By exploiting linearity, the effect of the individual forcing components is assessed and the contributions from the Orr mechanism and the lift-up effect are also identified. Finally, the effect of the strength of the eddy viscosity on the optimisation performance is investigated. The inclusion of the eddy viscosity diffusion operator is shown to be essential in modelling of the near-wall features, while still allowing the forcing of the self-similar primary peak. In particular, reducing the strength of the eddy viscosity results in a considerable increase in the near-wall forcing of wall-parallel components.

Mechanics↗
DOE OSTI2021

Dipole response in Te 128 , 130 below the neutron threshold

Numerous studies of the ground-state decay of the pygmy dipole resonance (PDR) have been carried out in the past. However, data on the decay of the PDR to low-lying excited states is still very scarce due to limitations of the sensitivity to weak branching transitions of experimental setups. Here, we present a detailed examination of the low-energy dipole response of 128 Te and 130 Te below their neutron separation thresholds of 8.8 and 8.5 MeV, respectively. Photonuclear reactions with the subsequent γ-ray spectroscopy of the decay channel with continuous-energy bremsstrahlung at varying endpoint energies and linearly polarized quasimonochromatic γ-ray beams with energies ranging from 2.7 to 8.9 MeV in steps of roughly 250 keV were used for probing the decay behavior of the low-energy dipole response in 128Te and 130Te. In addition, (γ,γ' γ") reactions were used to study the population of low-lying states of 128 Te. Spin-parity quantum numbers and reduced transition probabilities are determined for individual photo-excited states. The analysis of average decay properties for nuclear levels in narrow excitation-energy bins enable the extraction of photoabsorption cross sections, average branching ratios to the $2$$^{+}_{1}$ state, and the distinction between E1 and M1 transitions to the ground state and to the $2$$^{+}_{1}$ state accounting for resolved and unresolved transitions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Direct current response of a thin scCVD diamond detector under increased applied field to 14.1 MeV neutrons

An avalanche effect yielding inherent gain can be exploited in thin, single-crystal chemical vapor deposition (scCVD) diamond. It occurs when a high enough bias is applied across the diamond thickness while avoiding breakdown. This charge multiplication effect was studied previously with alpha particles and heavy ions either by using the transient current technique or by measuring the energy spectrum. The measurements we obtained to evaluate the charge multiplication performance of a 10 μm thick scCVD diamond detector used a novel approach—we employed an electrometer to characterize the response of the detector by performing directly coupled current measurements (time-averaged charge, at 1 Hz sampling) when exposed to 14.1 MeV neutrons from deuterium-tritium fusion. We measured both the dark and irradiated currents from the detector over a range of applied displacement field values from 2 to 75 V/μm. A histogram method with central mean and standard deviation width was used to determine the current over each measurement duration typically from 100 to 300 seconds. The dark-subtracted irradiated current (i.e., contrast) was used to evaluate the gain of the detector at each applied displacement field. The contrast at an applied displacement field between 15 and 20 V/μm was higher than the expected linear increase in contrast proportional to the increased applied bias, indicating the possible presence of avalanche events in the diamond. The detector response also indicated possible polarization and charge depletion effects. These results provide an opportunity to further explore the use of thin scCVD diamond as a fast neutron current mode detector with inherent gain.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

An Open-Source Frequency-Domain Model for Floating Wind Turbine Design Optimization

A new frequency-domain dynamics model has been developed that uses open-source components to efficiently represent a complete floating wind turbine system. The model, called RAFT (Response Amplitudes of Floating Turbines), incorporates quasi-static mooring reactions, strip-theory and potential-flow hydrodynamics, blade-element-momentum aerodynamics, and linear turbine control. The formulation is compatible with a wide variety of support structure configurations and no manual or time-domain preprocessing steps are required, making RAFT very practical in design and optimization workflows. The model is applied to three reference floating wind turbine designs and its predictions are compared with results from time-domain OpenFAST simulations. There is good agreement in mean offsets as well the statistics and spectra of the dynamic response, verifying RAFT’s general suitability for floating wind analysis. Follow-on work will include verification of potential-flow and turbine-control features and application to optimization problems.

17 WIND ENERGY↗
DOE OSTI2025

Antielectrophoretic Response-Driven Bending–Tilting Deformation of Cationic Polyelectrolyte Brushes Drives Nonlinear Electroosmotic Transport in Brush-Grafted Nanochannels

In this paper, we use all-atom molecular dynamics (MD) simulations to describe a non-linearly enhanced electroosmotic (EOS) flow, where, in a nanochannel grafted with cationic PMETAC ([Poly(2-(Methacryloyloxy)Ethyl) Trimethylammonium Chloride]) brushes, a two-fold increase in the electric field strength leads to a several-fold (more than two-fold) increase in the EOS flow strength and volume flow rate. The electric field enforces the PMETAC brushes to undergo a bending-tilting driven deformation with a significant portion of the brush layer becoming parallel to the grafting surface. In response, a substantial fraction of the counterions leave the brush layer (hence become more mobile), but instead of going into the bulk, accumulate at the brush-bulk interface, i.e., stay in proximity of the brush segments aligned parallel to the grafting surface. This creates an interesting situation, where the counterions are not completely within the brush layer, yet they fully screen the brush charges. Such “freer” conditions enable the counterions to achieve very high velocity, thereby ensuring that the water solvating the counterions themselves move very fast triggering the significantly augmented EOS transport. Probing deeper we can identify that the bending-tilting driven brush deformation, enforcing the brushes to align parallel to the substrate, results from the anti-electrophoretic behavior of the brushes, where despite being positively charged, the brushes move against the electric field direction. Such an anti-electrophoretic behavior of the PE brushes, which has not been reported before, can be associated with the very fast velocities of the negatively charged counterions and the electrostatic and hydrodynamic coupling of the counterions with the positive functional groups of the brushes. Here, we anticipate that the findings of this paper will shed light on strategies for nanochannel flow, the anti-electrophoretic response of charged polymer chains, and the significance of capturing the detailed chemical architecture of polyelectrolytes in nanoscale science and engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Comprehensive anisotropic linear optical properties of the Weyl semimetals TaAs and NbAs

We report that TaAs and NbAs are two of the earliest identified Weyl semimetals that possess many intriguing optical properties, such as chirality-dependent optical excitations and giant second harmonic generation (SHG). Linear and nonlinear optics have been employed as tools to probe the Weyl physics in these crystals. Here, we extend these studies to address two important aspects: determining the complete anisotropic dielectric response and exploring if and how they can reveal essential Weyl physics. We determine the complete anisotropic dielectric functions of TaAs and NbAs by combining spectroscopic ellipsometry and density functional theory (DFT). Parameterized Lorentz oscillators are reported from 1.2 - 6 eV (experiment) and 0 - 6 eV (DFT), and good agreement is shown between them. Both linear and nonlinear optical properties have been previously reported to reveal Weyl physics. We suggest that strong optical resonances from trivial bands are the likely origin of the large optical SHG previously reported at these energies. Furthermore, by comparing the contribution of a small k -space centered around the Weyl cones with the total linear dielectric function, we find that these contributions are highly anisotropic and are < 25% of the total dielectric function below 0.5 eV; abov1 eV, these contributions are negligible. Thus, the study of Weyl physics using optical techniques requires very low energies, and even there, a careful assessment is required in distinguishing the much smaller contributions of the Weyl bands from the dominant contributions of the trivial bands and Drude response to the total dielectric function.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimizing Piezoelectric Nanocomposites by High‐Throughput Phase‐Field Simulation and Machine Learning

Abstract Piezoelectric nanocomposites with oxide fillers in a polymer matrix combine the merit of high piezoelectric response of the oxides and flexibility as well as biocompatibility of the polymers. Understanding the role of the choice of materials and the filler‐matrix architecture is critical to achieving desired functionality of a composite towards applications in flexible electronics and energy harvest devices. Herein, a high‐throughput phase‐field simulation is conducted to systematically reveal the influence of morphology and spatial orientation of an oxide filler on the piezoelectric, mechanical, and dielectric properties of the piezoelectric nanocomposites. It is discovered that with a constant filler volume fraction, a composite composed of vertical pillars exhibits superior piezoelectric response and electromechanical coupling coefficient as compared to the other geometric configurations. An analytical regression is established from a linear regression‐based machine learning model, which can be employed to predict the performance of nanocomposites filled with oxides with a given set of piezoelectric coefficient, dielectric permittivity, and stiffness. This work not only sheds light on the fundamental mechanism of piezoelectric nanocomposites, but also offers a promising material design strategy for developing high‐performance polymer/inorganic oxide composite‐based wearable electronics.

42 ENGINEERING↗
DOE OSTI2024

Large-scale harmonic balance simulations with Krylov subspace and preconditioner recycling

The multi-harmonic balance method combined with numerical continuation provides an efficient framework to compute a family of time-periodic solutions, or response curves, for large-scale, nonlinear mechanical systems. The predictor and corrector steps repeatedly solve a sequence of linear systems that scale by the model size and number of harmonics in the assumed Fourier series approximation. In this paper, a novel Newton–Krylov iterative method is embedded within the multi-harmonic balance and continuation algorithm to efficiently compute the approximate solutions from the sequence of linear systems that arise during the prediction and correction steps. Further, the method recycles, or reuses, both the preconditioner and the Krylov subspace generated by previous linear systems in the solution sequence. A delayed frequency preconditioner refactorizes the preconditioner only when the performance of the iterative solver deteriorates. The GCRO-DR iterative solver recycles a subset of harmonic Ritz vectors to initialize the solution subspace for the next linear system in the sequence. The performance of the iterative solver is demonstrated on two exemplars with contact-type nonlinearities and benchmarked against a direct solver with traditional Newton–Raphson iterations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Breaking the Brønsted–Evans–Polanyi Relation with Dual-Metal Sites

Linear scaling relationships impose inherent limitations on catalyst activity; the Brønsted−Evans−Polanyi (BEP) relation, which correlates activation and reaction energies, is a prominent example. Here we report a dual-metal site catalyst (DMSC) on ceria that breaks the BEP relation for C−C coupling of methyl intermediates an elementary step in methane coupling to form ethane. The DMSC structure on CeO 2 (111) was discovered by density-functional theory (DFT) structural exploration and confirmed to be stable via ab initio thermodynamics and ab initio molecular dynamics. Homonuclear and heteronuclear DMSCs of Ni, Pd, Pt, Fe, Ru, Os, Co, Rh, and Ir (45 pairs in total) were examined for methyl affinity and methyl−methyl coupling activation energy. We found that many heteronuclear DMSCs break the BEP linear scaling due to a mixed low-affinity/high-affinity coadsorption of the two methyl groups, decoupling the step responsible for the activation energy (E a ) at the low-affinity site from the overall reaction energy (ΔE) determined by both sites. This mechanism of breaking the BEP relationship via the DMSCs offers a catalyst design principle for C−C coupling reactions.

Chen, Yiming [Vanderbilt Univ., Nashville, TN (Uni↗
DOE OSTI2022

Measurement of scintillation response of CsI[Na] to low-energy nuclear recoils by COHERENT

Here, we present results of several measurements of CsI[Na] scintillation response to 3–60 keV energy nuclear recoils performed by the COHERENT collaboration using tagged neutron elastic scattering experiments and an endpoint technique. Earlier results, used to estimate the coherent elastic neutrino-nucleus scattering (CEvNS) event rate for the first observation of this process achieved by COHERENT at the Spallation Neutron Source (SNS), have been reassessed. We discuss corrections for the identified systematic effects and update the respective uncertainty values. The impact of updated results on future precision tests of CEvNS is estimated. We scrutinize potential systematic effects that could affect each measurement. In particular we confirm the response of the H11934-200 Hamamatsu photomultiplier tube (PMT) used for the measurements presented in this study to be linear in the relevant signal scale region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗